Thanks for the replies and suggestions. I have confirmed that my audio levels
are fine. This happens both on an antenna and a dummy load on 15 meters. The
radio does always wind up transmitting at desired power and with good
modulation within less than a minute.
It is apparently just an odd
Don's procedure in his doc works great. But there is a gotcha that I
don't recall being covered.
The ALC meter algorithim "beats" with certain tuning tones and when that
happens, it makes the ALC meter ramp up and down in a fast oscillation.
This has been discussed on this list relatively
Bob,
It sounds like your KX3 is "power hunting". The KX3 (and other Elecraft
transceivers) control power differently than any other amateur
transceiver, so you must ignore the common internet (and many data mode
instructions) in how to set up the KX3 for data modes.
Do you have sufficient
I have an odd issue that is only happening on 15 meters, and I notice it most
in digital modes because they are 100% duty cycle. My first transmissions on
the band are at reduced power from my power setting (usually 5 W), but the
indicated output slowly builds over 2 or 3 transmission cycles to
4 matches
Mail list logo
