ld change all
that. At that point, I would use the kxpa100 with its tuner.
(possibly even cheaper)
W1GCF
Geoff
From: Julia Tuttle [mailto:ju...@juliatuttle.net]
Sent: Wednesday, August 24, 2022 12:53 PM
To: jerry
Cc: Geoffrey Feldman; Elecraft; JEROME SODUS
Subject: Re: [Elecraft] KX3 and its &qu
liatuttle.net]
Sent: Wednesday, August 24, 2022 12:53 PM
To: jerry
Cc: Geoffrey Feldman; Elecraft; JEROME SODUS
Subject: Re: [Elecraft] KX3 and its "TUNE" selection. (With mag loop)
Hi Jerry,
That's absolutely possible over the serial port (ACC1)! The Programmer's
Re
Feldman; Elecraft; JEROME SODUS
Subject: Re: [Elecraft] KX3 and its "TUNE" selection. (With mag loop)
Hi Jerry,
That's absolutely possible over the serial port (ACC1)! The Programmer's
Reference has the details:
https://ftp.elecraft.com/K3S/Manuals%20Downloads/K
Hi Jerry,
That's absolutely possible over the serial port (ACC1)! The Programmer's
Reference has the details:
https://ftp.elecraft.com/K3S/Manuals%20Downloads/K3S%20Pgmrs%20Ref,%20G5.pdf
73,
Julie
On Wed, Aug 24, 2022, 12:49 jerry wrote:
> I'm starting work on a magloop project. I wonder
I'm starting work on a magloop project. I wonder how hard it would be
to
have a transceiver tell the magloop what frequency it's tuned to? That
could
operationally be simpler than having to hit it with low-power RF so it
can tune
itself...
- Jerry, KF6VB
On 2022-08-23
If your antenna is a magloop - DO NOT USE the tune button. In fact, clear
the tuner memory for your band per instructions. The tuner feature
(assuming you have the option) is great with other antennas, especially
random wire but it doesn't go well with mag loops. The xmit button is
simply
Jerry: Just in case you are not [yet] aware ... Small so-called
"magnetic loops" must be exactly resonant meaning that you go to TUNE
mode [i.e. feeding power to the loop] and then adjust the loop for exact
resonance. While exact resonance is indicated by zero reactance looking
into the
Hi Jerry,
The CW signal from TUNE (or ATU TUNE) is *truly* continuous, not pulsed on
and off to spell things in Morse. It's like holding down a straight key,
except it's a toggle so you still have both hands free. As Lee noted, you
can ID before or after tuning, or just roll it into your next
1) the KX3
2) it's just a carrier
You can ID either before or after the Tune process.
73 de Lee, AA4GA
On Tue, Aug 23, 2022 at 4:07 PM JEROME SODUS wrote:
> Hello,
>
> Yesterday, I was re-reading the KX3-manual to prepare for putting into use
> a magnetic-loop-antenna.
>
> The KX3 manual,
Hello,
Yesterday, I was re-reading the KX3-manual to prepare for putting into use a
magnetic-loop-antenna.
The KX3 manual, on page 14, has this wording "TUNE is used to put out a CW
signal at the power level selected by the PWR control.".
This is new territory for me as I have never have used
10 matches
Mail list logo