Hi,
I'm writing a utility to control the equalizer via a PC which would allow
quick changing from the PC desktop but I seem to be missing something?
I can get the EQ menu with a MN008; and then I can do an UP or DN to control
the value of the EQ-1 range. How does one go to the next range? i.e.
Tom
Use the SWTnn command. Where nn is determined by using the table on page 23 of
the programmer guide. So for band one, send SWT11. For band 4, send SWT24.
Hope this helps.
Harlan, NC3C
Sent from my Verizon Wireless 4G LTE DROID
tomb18 tom...@videotron.ca wrote:
Hi,
I'm writing a utility to
You could use SWT for the keypad switches. See the programmer's
manual, Table 7 (K3), Table 8 (KX3).
SWT11 emulates presing the '1' key, SWT12 is '2', etc. They're not
entirely in order, so you will need the tables.
73,
matt
On Sun, 24 Mar 2013 07:45:28 -0700 (PDT), you wrote:
Hi,
I'm
Thanks guys!! Got it.
Now, here's a question; I've written software to control the P3 from Windows
using a frame grabber. So far the software only pertains to the P3, but now
I'm thinking having this as well would be great. What should I do? New
software?, or add-on?
Thanks
VA2FSQ.COM
--
Well Tom. I think you need to add them togetheralong with total k-line
control... K3, KPA500, KAT500, and P3. I have started that project but have
temporarily dogged off to write an app that queries the K3 and sends all Main
and Configuration functions to notepad.
Harlan, NC3C
Sent from
Why not use the TE command?
TE (Transmit EQ; SET only) SET format: TEabcdefgh; where a through h
are 3-character values, each with a range of –16 to +16 dB. Values a
through h correspond to EQ bands as follows: a = 50 Hz, b = 100 Hz, c =
200 Hz, d = 400 Hz, e = 800 Hz, f = 1600 Hz, g = 2400
re TE: I was looking for receive, to optimize the sound for various DX. As
far as I looked, there is no equivalent for receive.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Programming-REQ-tp7571788p7571800.html
Sent from the Elecraft mailing list archive at
Hi,
Pleas from others and myself for an RE command have fallen on deaf ears for
at least two years.
Knut - AB2TC
tomb18 wrote
re TE: I was looking for receive, to optimize the sound for various DX.
As far as I looked, there is no equivalent for receive.
--
View this message in
I thought that was what the SHIFT and LO - Cut - HI controls were
for?
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 24 Mar 2013 13:00:12 -0700 (PDT), ab2tc ab...@arrl.net
wrote:
Hi,
Pleas from others and myself for an RE command have fallen on deaf
Hi,
Nope, those move around brick wall cut off edges. The equalizer makes soft
changes within the passband betwen the brick walls.
Knut - AB2TC
N5GE wrote
I thought that was what the SHIFT and LO - Cut - HI controls were
for?
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
10 matches
Mail list logo
