into the
top of my vice neatly crushing the body and breaking the pcb :-(
silverliningHo Hum... it was a rubbish probe anyway./sl
I would second this, I've had to dodge flying bits of small end mills
due to the same scenario!
--
Ed Simmons
e...@estechnical.co.uk
http://www.estechnical.co.uk
On 19/03/14 00:57, jeremy youngs wrote:
also modifying the
work offset affects EVERY tool , (further bad juju) , however understanding
the limits of many of us on the list without toolchangers and holders i use
the touch off method, while not perfect it has sufficed for anything i do
at the
On 18/03/14 08:47, andy pugh wrote:
On 18 March 2014 08:37, Ed Simmons e...@estechnical.co.uk wrote:
I'd like to know if it's possible to measure the actual speed of the
spindle by also connecting the 3 hall sensor signals to the inputs of my
5I23 Mesa card
Yes, just connect any single Hall
Hi Paul,
On 17/03/2014 15:08, Paul S. wrote:
Hello again, it's been a long time since my last email, and I've tried to
make hal driver for my boards' gpios, but it seems I'm stuck.
First, I've used pcl720.comp as an example, and after a couple of
iterations I've got this code:
Hi Linuxcnc list,
I've just made a start with Gladevcp for a custom control panel for our
engraving machine.
We frequently cut and engrave bendy plastic panels that need to be set
in the machine very level... we have a simple probe routine as a gcode
file at the moment that probes the height of
