From: bodge...@gmail.com
Date: Fri, 27 Jan 2012 21:23:25 +
To: emc-developers@lists.sourceforge.net
Subject: Re: [Emc-developers] [Emc-users] question on gcode parsing
On 27 January 2012 21:14, Kent A. Reed knbr...@erols.com wrote:
(the next-generation next-generation controller?).
and the link to linuxcnc.org/handbook is dead too
Am 19.01.2012 um 20:50 schrieb Michael Haberler:
these were dead before the rename already. Maybe somebody in the know can fix
them.
IRC: #LinuxCNC and #LinuxCNC-devel on irc.freenode.net
• Searchable IRC archives: [Austria]
Hi this is the new almost perfect patch for xyuv foamcutting mashines
Now Highlighting is implemented
code is reduced to a minimum
maybe liveplotting data can be shorten some more OR i need a trigger for
States.gcodes 171 in LivePlotter.updade
otherwise the list is gone be huge and not used
Hello, all,
I have just discovered a bug in the 2.5 hal/drivers/hal_ppmc.c driver.
There are several
optional features that are activated by options on the loadrt line.
These are the extradac=0x00 and the timestamp=0x00 options.
They appear to work separately, but when they both appear on the
Hi Jon,
A UPC board, this is a Universal PWM/Servo Controller?
So a PPMC setup would not be of any help on this problem?
Just trying to offer help if I can, but no UPC here.
Kim
On 01/28/2012 10:50 PM, Jon Elson wrote:
Hello, all,
I have just discovered a bug in the 2.5
Kim Kirwan wrote:
Hi Jon,
A UPC board, this is a Universal PWM/Servo Controller?
So a PPMC setup would not be of any help on this problem?
Just trying to offer help if I can, but no UPC here.
Nope, a PPMC doesn't have the spindle DAC option, and at least so far
I have not added the
On 01/28/2012 09:50 PM, Jon Elson wrote:
I have just discovered a bug in the 2.5 hal/drivers/hal_ppmc.c driver.
There are several
optional features that are activated by options on the loadrt line.
These are the extradac=0x00 and the timestamp=0x00 options.
They appear to work separately, but