On 26 February 2014 06:11, a k pccncmach...@gmail.com wrote:
my question is can i use on one system 3 ac servomotors and 2 stepper
motors?
Yes, there is absolutely no reason why not.
(Your extra axes would conventionally be U and V rather than A and B)
--
atp
If you can't fix it, you don't
On 26 February 2014 02:29, Leonardo Marsaglia
leonardomarsagli...@gmail.com wrote:
libnml/buffer/physmem.cc 143: PHYSMEM_HANDLE: Can't write 11592 bytes at
offset 60 from buffer of size 10208.
See
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UPDATING#Changes_between_2_3_x_and_2_4_x
section 1.1
It
Hi Andy,
Yes. That was causing the error. Didn't know too much about those changes.
Also, you're right, the old version installed on this computer was 2.3.X.
Thanks for helping me out!
Leonardo.
2014-02-26 7:14 GMT-03:00 andy pugh bodge...@gmail.com:
On 26 February 2014 02:29, Leonardo
On 2/25/2014 11:26 PM, Gregg Eshelman wrote:
On 2/25/2014 7:21 AM, Charles Steinkuehler wrote:
On 2/25/2014 8:16 AM, Dave Cole wrote:
I'm sure it would depend upon how Xylotex or others are implementing
their cape..
BTW, I'm curious; Does anyone know who came up with the term cape ??
That
This is my first attempt at merging the hal files and ini files
following discussions over the crackling motors.
Using 7i76e.zip from Peter Wallace
I have attatched the Hal and ini file.
All i get is no movement and a joint following error. Could anyone have
a look and see if there is
On 2/26/2014 8:10 AM, Mark Tucker wrote:
This is my first attempt at merging the hal files and ini files
following discussions over the crackling motors.
Using 7i76e.zip from Peter Wallace
I have attatched the Hal and ini file.
All i get is no movement and a joint following error. Could
Charles
Your a star.
It's running on the screen now so that is a start with no errors.
I will plug it into the machine and play with the deadband etc.
On 26/02/14 14:45, Charles Steinkuehler wrote:
On 2/26/2014 8:10 AM, Mark Tucker wrote:
This is my first attempt at merging the hal files and
Folks
I am happy, then with the help of Jon I got my Fanuc 10s servomotor
running with his pico-systems universal pwm board, fanuc encoder und
servo amp. Encoder runs and the motor is turning - somewhat...
I was playing around with the parameters but never got a nice motor
movement. following
I eventually managed to merge a few hal files and ini files to Change
the stepgens etc to work in velocity mode.
I have just connected up to the machine,and initial testing is excellent.
Strange thing though ,i have not entered any deadband figures yet but
the crackling seems to have gone.
I
Hi
i have stepper motor from Keling Technology KL23H2100-35-4b
and Microstep Driver kl5056
question: if i add to that stepper motor shaft encoder like
The maximum step frequency depends on your PRU task loop time, which
depends on how many tasks you're actually running. By default, the PRU
task loop is 10 uS, which means step pulses can be generated every 20 uS
(one period high, one period low) minimum, which gives a 50 KHz maximum
step
On Wednesday 26 February 2014 15:29:32 a k did opine:
Hi
i have stepper motor from Keling Technology KL23H2100-35-4b
and Microstep Driver kl5056
question: if i add to that stepper motor shaft encoder like
http://www.ebay.com/itm/400P-R-incremental-rotary-encoder-400-pulses-MAX
Hi,
Got it.
Thanks,
Jeff
Date: Wed, 26 Feb 2014 02:32:57 +0100
From: mic...@wp.pl
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] beaglebone fpga with linuxcnc
Hi,
On Wed, 26 Feb 2014 12:24:08 -0800, you wrote:
Hi
i have stepper motor from Keling Technology KL23H2100-35-4b
and Microstep Driver kl5056
question: if i add to that stepper motor shaft encoder like
On 02/26/2014 10:27 AM, Daniel Duesentrieb wrote:
Folks
I am happy, then with the help of Jon I got my Fanuc 10s servomotor
running with his pico-systems universal pwm board, fanuc encoder und
servo amp. Encoder runs and the motor is turning - somewhat...
I was playing around with the
15 matches
Mail list logo