On Monday 08 February 2021 17:36:35 Jon Elson wrote:
> On 02/08/2021 12:11 PM, Gene Heskett wrote:
> > If you've room for it Jon I expect it would be a pretty good deal at
> > that price. But check the ceiling height it needs too, that looks to
> > be in excess of the usual 96" tall. I'd probably
On Mon, 8 Feb 2021 at 22:38, Jon Elson wrote:
> Oh YEAH! That's why I can't have a Bridgeport BOSS machine,
> the top of the head would be WAY up inside the kitchen
> cabinets!
So?
It might even make shifting the belt easier.
--
atp
"A motorcycle is a bicycle with a pandemonium attachment
On 02/08/2021 12:11 PM, Gene Heskett wrote:
If you've room for it Jon I expect it would be a pretty good deal at that
price. But check the ceiling height it needs too, that looks to be in
excess of the usual 96" tall. I'd probably be 5 or 6"" or so thru the
ceiling in my garage. With 3
On Monday 08 February 2021 10:44:56 Jon Elson wrote:
> On 02/08/2021 08:20 AM, Todd Zuercher wrote:
> > Gene,
> >
> > If you aren't too far away to drive to Cleveland, these guys might
> > be a good place to ckeck out. HGR has all manor of junk to look at.
> > Here is just one of many options.
>
> From: Jon Elson [mailto:el...@pico-systems.com]
> On 02/08/2021 08:20 AM, Todd Zuercher wrote:
> > Gene,
> >
> > If you aren't too far away to drive to Cleveland, these guys might be a
> > good place to ckeck out. HGR has all manor of junk to look at.
> Here is just one of many options.
> >
Brows their site, you may find something that suits you better.
Todd Zuercher
P. Graham Dunn Inc.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Jon Elson
Sent: Monday, February 08, 2021 10:45 AM
To: Enhanced Machine Controller (EMC)
On Monday 08 February 2021 05:04:58 Gregg Eshelman via Emc-users wrote:
> To identify a USB 3.0 port where it's not blue, look for the trident
> logo with SS (for Super Speed) instead of the regular straight 'shank'
> on it.
No such critters to be seen.
> On Monday, February 8, 2021, 1:55:37
On 02/08/2021 08:20 AM, Todd Zuercher wrote:
Gene,
If you aren't too far away to drive to Cleveland, these guys might be a good
place to ckeck out. HGR has all manor of junk to look at. Here is just one of
many options.
Gene,
If you aren't too far away to drive to Cleveland, these guys might be a good
place to ckeck out. HGR has all manor of junk to look at. Here is just one of
many options.
https://hgrinc.com/productDetail/CNC/Used-Supermax-Supermax-Ycm-40-CNC-Vertical-Ill/10200670001/
Todd Zuercher
P.
On Monday 08 February 2021 04:40:49 andy pugh wrote:
> On Mon, 8 Feb 2021 at 09:09, Gene Heskett wrote:
> > > I doubt it. In fact the whole mill might be surprisingly tiny.
>
> A bit more research indicates that the "VH-2" in the auction
> description is actually the designation of the vertical
On Mon, 8 Feb 2021 at 10:15, Gregg Eshelman via Emc-users
wrote:
>
> A closer look at the pics and I see it's a TM mill with the VH-2 vertical
> head.
Ah, yes, it doesn't seem to have the swinging table (though the
difference is rather subtle and hard to spot in photos, so it might
just have
A closer look at the pics and I see it's a TM mill with the VH-2 vertical head.
Here's a spec sheet
https://ozarktoolmanuals.com/wp-content/uploads/pdfcatalogs/Hardinge_Horizontal_Mill_Bulletin.pdf
On Monday, February 8, 2021, 2:09:54 AM MST, Gene Heskett
wrote:
On Monday 08
To identify a USB 3.0 port where it's not blue, look for the trident logo with
SS (for Super Speed) instead of the regular straight 'shank' on it.
On Monday, February 8, 2021, 1:55:37 AM MST, Gene Heskett
wrote:
Greetings all;
When I took the newer Dell computer out to the garage and
On Mon, 8 Feb 2021 at 09:09, Gene Heskett wrote:
> > I doubt it. In fact the whole mill might be surprisingly tiny.
A bit more research indicates that the "VH-2" in the auction
description is actually the designation of the vertical head (Vertical
Head 2?)
The mill itself is probably a Hardinge
If only such would work for my neck. Sometimes I'll lie on my back and hang my
head off the side of my bed then move it all around and get a POP, or while
standing or sitting extending my head forward with chin up. Sometimes it's loud
enough other people nearby can hear it pop.
Going to be
On Monday 08 February 2021 03:42:11 Gregg Eshelman via Emc-users wrote:
> Weird, that VH-2 looks exactly like a UM, but there are 5C and R8
> collets in the tray. The horizontal spindle is 5C and the vertical
> head on a UM (swivel table) or TM (non-swivel table) uses 4C.
I *think* this table
Greetings all;
When I took the newer Dell computer out to the garage and hooked it up
late this after noon to drive the GO704, I plugged in the old camera,
and logged into it from the house just now. I ran linuxcnc -l, and
chased down and installed stuff that running linucnc said it couldn't
Weird, that VH-2 looks exactly like a UM, but there are 5C and R8 collets in
the tray. The horizontal spindle is 5C and the vertical head on a UM (swivel
table) or TM (non-swivel table) uses 4C.
On Sunday, February 7, 2021, 7:22:09 AM MST, andy pugh
wrote:
On Sun, 7 Feb 2021 at
Suggest it to Tormach to add to their flat nosed 3/4" R8 TTS collet. Dunno how
hard the top flange surface is on their TTS holders and epoxy on converter
rings. One neat thing about the TTS holders is they work in the vertical head
for a Hardinge UM/TM horizontal mill with a stock 3/4" 4C
19 matches
Mail list logo
