Thanks Dave. Somehow I missed that page on the shumatech web site.
That helps a lot.
I've got a DRO 550 that needs an enclosure and an overlay. But the DRO
350 itself is working just fine, all I need are scales that work too and
are compatible with the DRO.
Mark
On 5/8/22 15:13, dave
Thanks Scott. Unforch the DRO uses neither of those connectors. I've
got the pinout for the mini Din, was just looking for the scale's mini
USB pinout.
Mark
On 5/8/22 23:28, Scott Harwell via Emc-users wrote:
This might help.
Scott
On Sunday, May 8, 2022, 02:16:56 PM CDT, dave
This might help.
Scott
On Sunday, May 8, 2022, 02:16:56 PM CDT, dave engvall
wrote:
Indeed, it is an interesting approach.
http://www.shumatech.com/support/chinese_scales.htm#Scale%20Connector
It may be time to dig out the scope or to upgrade to newer scales and
readout.
If the
On Sun, 8 May 2022 at 16:04, Mark wrote:
> Wondering if
> anyone knows what the pinout for the mini USB connector on the scale
> would be
I would be astonished if the +V and 0V do not coincide with the
standard USB pinout.
So that would leave two options to try for which is data and which
Indeed, it is an interesting approach.
http://www.shumatech.com/support/chinese_scales.htm#Scale%20Connector
It may be time to dig out the scope or to upgrade to newer scales and
readout.
If the glass scale is very good then it is probably worth the fuss ...
else
The chinese scales I got
Hi All,
I've got an elderly Shumatech DRO-350 and was using it this past week
and the read head on the X axis of my mini mill decided it was time to
give up the ghost. I ordered what looked to be a drop in replacement but
when it arrived, I noticed it had a mini USB connector as it's data