Just wanted to start the discussion about having an EMC Fest
in 2010. Have any discussions about where and when taken
place?
The 2009 show in Wichita, KS worked very well for developers,
but was not associated with a traditional public show.
The old CNC Workshop show is no longer held in
I hope to attend, and I hope to see fellow developers and users there.
It would be great if we can get a developer area for 6-8 networked PCs
and internet access, as past years have shown this is a great way to
work together on bugs or new features. Does someone know who to talk to
about that?
Steve Stallings wrote:
Just wanted to start the discussion about having an EMC Fest
in 2010. Have any discussions about where and when taken
place?
The 2009 show in Wichita, KS worked very well for developers,
but was not associated with a traditional public show.
The old CNC Workshop
open access, and have internet,
but none of that has been confirmed.
Steve Stallings
-Original Message-
From: Jeff Epler [mailto:jep...@unpythonic.net]
Sent: Tuesday, January 12, 2010 10:07 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] EMC Fest 2010 ??
I hope
, 2010 10:07 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] EMC Fest 2010 ??
I hope to attend, and I hope to see fellow developers and users there.
It would be great if we can get a developer area for 6-8
networked PCs and internet access, as past years have shown
Jeff Epler wrote:
I hope to attend, and I hope to see fellow developers and users there.
It would be great if we can get a developer area for 6-8 networked PCs
and internet access, as past years have shown this is a great way to
work together on bugs or new features. Does someone know who to
Jon Elson wrote:
Stuart Stevenson wrote:
Fest 2009
Workshop
May 21 thru May 27
MPM Inc
2100 S West St
Wichita KS 67213
316 945 1227
Which reminds me, what is happening on the hotel negotiations? Is there
a particular hotel that has been selected, and maybe giving a special
I will get some rates for different levels and let you know
On Fri, Apr 24, 2009 at 12:40 PM, John Kasunich jmkasun...@fastmail.fm wrote:
Jon Elson wrote:
Stuart Stevenson wrote:
Fest 2009
Workshop
May 21 thru May 27
MPM Inc
2100 S West St
Wichita KS 67213
316 945 1227
Which reminds
Gentlemen,
We have hotels and motels. We asked about special rates. There are
no motels that give much discount. The rates run from (dives) single
at $25/night - $125/wk on up. I have never seen the $25.00 rooms. I
will go see one this weekend. Not expecting much :)
Stuart
On Fri, Apr 24, 2009
You may need to call in the priceline negotiator :)
Len
-Original Message-
From: Stuart Stevenson [mailto:stus...@gmail.com]
Sent: Friday, April 24, 2009 12:52 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] EMC-Fest lodging (was: [OT] Washing Machine
3-PhaseMotor
Unfortunately, something went wrong with internet access at the workshop,
so we've been without for most of the past 2 days. I'm at the hotel now,
which is the only reason I can post this :)
I don't know whether we'll have access tomorrow, so commits and IRC
participation may be spotty.
- Steve
an appetite
for the BBQg
John Prentice
- Original Message -
From: Jon Elson [EMAIL PROTECTED]
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Sent: Monday, June 16, 2008 6:35 AM
Subject: Re: [Emc-users] EMC Fest
Jeff Epler wrote:
On Sun, Jun 15
Sent: Monday, June 16, 2008 6:35 AM
Subject: Re: [Emc-users] EMC Fest
Jeff Epler wrote:
On Sun, Jun 15, 2008 at 11:02:05PM -0500, Jon Elson wrote:
Great! Where's the webcam?
http://linuxcnc.org/compile_farm/festcam.shtml
HUH! Bunch of pikers - where the heck are you? All I see are
empty
http://linuxcnc.org/compile_farm/festcam.shtml
HUH! Bunch of pikers - where the heck are you? All I see are
empty chairs!
Jon
Agree, it's only 2 at night and already everyone has gone of to bed ? :-)
Think this is good though, you need to be fully awake when operating these
powerful
How about
Chris Radek ?
;-)
Alex
PS: sorry I'm not there..
- Original Message -
From: Jeff Epler [EMAIL PROTECTED]
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Monday, June 16, 2008 01:01
Subject: Re: [Emc-users] EMC Fest
so far we've got
: Jeff Epler [EMAIL PROTECTED]
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Monday, June 16, 2008 01:01
Subject: Re: [Emc-users] EMC Fest
so far we've got
Jeff Epler
John Kasunich
Steve Padnos
Kenneth Lerman
Steve Stallings
Matt
Jeff Epler wrote:
so far we've got
Jeff Epler
John Kasunich
Steve Padnos
Kenneth Lerman
Steve Stallings
Matt Shaver
Ray Henry
...and, of course, Jon Elson is on his way...
It would be great if y'all could use the webcam to capture a group
So,
Who is at the fest and set up? I'm frantically putting stuff
together and trying to get ready to head up there tomorrow.
Jon
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
so far we've got
Jeff Epler
John Kasunich
Steve Padnos
Kenneth Lerman
Steve Stallings
Matt Shaver
Ray Henry
and I've probably forgotten someone..
Jeff
-
Check out the new SourceForge.net
Jeff Epler wrote:
so far we've got
Jeff Epler
John Kasunich
Steve Padnos
Kenneth Lerman
Steve Stallings
Matt Shaver
Ray Henry
Great! Where's the webcam?
It looks like I will be assembling a servo system there, as I
have run out of time here to put it
On Sun, Jun 15, 2008 at 11:02:05PM -0500, Jon Elson wrote:
Great! Where's the webcam?
http://linuxcnc.org/compile_farm/festcam.shtml
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell
Jeff Epler wrote:
On Sun, Jun 15, 2008 at 11:02:05PM -0500, Jon Elson wrote:
Great! Where's the webcam?
http://linuxcnc.org/compile_farm/festcam.shtml
HUH! Bunch of pikers - where the heck are you? All I see are
empty chairs!
Jon
Ed wrote:
A while back someone mentioned video recording the workshop classes and
offering them on DVD. Since I will not arrive until Thurs evening at
best I will miss most of the classes that have the most interest to me
(CL and HAL). On another note, has anyone done much with electronic
On Wed, Jun 11, 2008 at 09:45:28AM -0400, Ed wrote:
On another note, has anyone done much with electronic
gearing? I have an old horizontal mill that I would like to convert to a
gear hobber,
Another approach might be based on G33, aka spindle synchronized
motion (most commonly used for
Chris Radek wrote:
On Wed, Jun 11, 2008 at 09:45:28AM -0400, Ed wrote:
On another note, has anyone done much with electronic
gearing? I have an old horizontal mill that I would like to convert to a
gear hobber,
Another approach might be based on G33, aka spindle synchronized
motion
John Kasunich wrote:
Ed wrote:
A while back someone mentioned video recording the workshop classes and
offering them on DVD. Since I will not arrive until Thurs evening at
best I will miss most of the classes that have the most interest to me
(CL and HAL). On another note, has anyone done
Ed wrote:
Which brings up the question of power availability. I would like to
bring a project that would need 240V 3Phase at about 10Amps. Does anyone
know if that is available? Hard wiring or common plugs are not a
problem. Ed.
Roland most certainly has good 3-phase power at his
John Kasunich wrote:
The Mazak is three-phase, and plugs into a twist-lock receptacle, but I
don't recall if it is 240V or 480V. Depending on how continuously you
will need power we could unplug the Mazak and plug in your machine. I
seem to recall that the plug is fed from a disconnect,
be invaluable
to us who can't attend. I'd also be willing to offer my time to dupe
masters for said effort.
Greg
- Original Message -
From: Patrick Ferrick [EMAIL PROTECTED]
To: emc-users@lists.sourceforge.net
Sent: Sunday, May 11, 2008 8:53 PM
Subject: Re: [Emc-users] EMC Fest
Hi all
Ray Henry wrote:
Hi Ed
I've twisted Roland's arm just enough to get extra tables. I'm hoping
we'll have enough for all of the EMC crowd. Got any ideas about layout
in the space?
Rayh
The tables last year were in a U configuration, maybe this year it
will have to be a doubleU with
Ed wrote:
Ray Henry wrote:
Hi Ed
I've twisted Roland's arm just enough to get extra tables. I'm hoping
we'll have enough for all of the EMC crowd. Got any ideas about layout
in the space?
Rayh
The tables last year were in a U configuration, maybe this year it
will have to be a
I've done that.
On Wed, 2008-05-07 at 21:53 -0400, John Kasunich wrote:
John Kasunich wrote:
Ray Henry wrote:
Sounds like you are saying you want me not to teach this class.
(off list)
Hi Ray:
Damn.
-
Hi Ed
I've twisted Roland's arm just enough to get extra tables. I'm hoping
we'll have enough for all of the EMC crowd. Got any ideas about layout
in the space?
Rayh
On Tue, 2008-05-06 at 14:08 -0400, Ed wrote:
Ray Henry wrote:
Hi Dale
I'll be bringing a few computers that I
Hello!
What did I said bad or what recommend bad/stupid ideas?
If one got happy when I burned down my encoder with 24 V, thank you to
saying that.
It really looks educational and helpful.
What did I said or proposed was wrong???
Sorry if I cause trouble.
Aram
Ray Henry wrote:
Sounds like
Hi Aram,
RS-274NGC as far as I can tell just doesn't provide for special
functions. It does provide G01, G02, G03. Anything else is programmed
by using that facility and programming externally. A few
manufacturers have provided splines specially coded within their
version of the
The class I outlined is intended for folk a bit like you were a couple
years ago. In fact I drew it back further into newbie than that class.
My ideal student for these sessions is someone who wants to make parts
with EMC rather than someone who wants to make machines that run with
EMC.
There
Hello Ray.
It is right there are people with different interest and level.
There are two points that I want to make.
1. there are some help such as G code use that is possible to get everyway
any 2 years colleges will offer that. Why need spend valuable time of
Fest on it?
Help with
Sounds like you are saying you want me not to teach this class.
On Wed, 2008-05-07 at 19:03 -0600, [EMAIL PROTECTED] wrote:
Hello Ray.
It is right there are people with different interest and level.
There are two points that I want to make.
1.there are some help such as G code use that
Ray Henry wrote:
Sounds like you are saying you want me not to teach this class.
(off list)
Hi Ray:
Aram is being Aram. He was at least year's workshop, and he is enough
to try anyone's patience. Most of us are just ignoring him. It may
seem rude, but we've tried, and there just isn't much
John Kasunich wrote:
Ray Henry wrote:
Sounds like you are saying you want me not to teach this class.
(off list)
Hi Ray:
Damn.
Well obviously I don't know how to operate my email client.
Sorry
John Kasunich
-
Message: 2
Date: Mon, 5 May 2008 19:27:21 -0700 (PDT)
From: Dale Ertley [EMAIL PROTECTED]
Subject: [Emc-users] EMC Fest 2008
To: emc-users@lists.sourceforge.net
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1
Hello,
Will there be any good training
Just hang out in the emc area; there is always something going on. :-)
Dave
On May 6, 2008, at 6:48 AM, Stuart Stevenson wrote:
Message: 2
Date: Mon, 5 May 2008 19:27:21 -0700 (PDT)
From: Dale Ertley [EMAIL PROTECTED]
Subject: [Emc-users] EMC Fest 2008
To: emc-users
area; there is always something going on. :-)
Dave
On May 6, 2008, at 6:48 AM, Stuart Stevenson wrote:
Message: 2
Date: Mon, 5 May 2008 19:27:21 -0700 (PDT)
From: Dale Ertley
Subject: [Emc-users] EMC Fest 2008
To: emc-users@lists.sourceforge.net
Message-ID: [EMAIL PROTECTED]
Content-Type
Dale Ertley wrote:
Hello,
Will there be any good training for newbies at the EMC Fest 2008?
I am new to EMC. I am also in the process of putting a 4+ axis (xyzw+)
full size mill on EMC2.
I'm not sure exactly what formal classes there will be. I hope
we can have something more
--
Message: 7
Date: Tue, 6 May 2008 08:48:18 -0700 (PDT)
From: Dale Ertley [EMAIL PROTECTED]
Subject: Re: [Emc-users] EMC Fest 2008
To: Enhanced Machine Controller \(EMC\)
emc-users@lists.sourceforge.net
Message-ID: [EMAIL PROTECTED]
Content
Dale Ertley wrote:
Hello,
Will there be any good training for newbies at the EMC Fest 2008?
I am new to EMC. I am also in the process of putting a 4+ axis (xyzw+) full
size mill on EMC2.
Thank you
Dale
Ray Henry is planning classes - I believe he is going to have
: Dale Ertley
Subject: [Emc-users] EMC Fest 2008
To: emc-users@lists.sourceforge.net
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1
Hello,
Will there be any good training for newbies at the EMC Fest 2008?
I am new to EMC. I am also in the process of putting a 4+ axis
Hi Dale
I'll be bringing a few computers that I want/plan to network together
into some sort of 8.04-EMC2 lab.
My first class at will start at 8:00 am will be a Linux/EMC2 intro.
Monday -- Starting EMC2 in the Ubuntu Linux environment.
Tuesday-- EMC2 operator
Ray Henry wrote:
Hi Dale
I'll be bringing a few computers that I want/plan to network together
into some sort of 8.04-EMC2 lab.
My first class at will start at 8:00 am will be a Linux/EMC2 intro.
Monday -- Starting EMC2 in the Ubuntu Linux environment.
Tuesday--
Dave Engvall wrote:
You get to take your chances. Several of the attendees stayed at the
Econo Inn. I stayed there two years ago.
They had just changed the beds and the new ones were too firm for me.
I will stay at the Holiday Inn Express which is more expensive and
farther away; but then
Hi
I want to ask about Wednesday -- Hand coded part programs part 1
Is this programming with G code?
I think that use G code to program part possible to find in every
community college. Help in G code programming is every way.
What is impossible to find it is EMC2 inside. Learn how to make
Do you guys have the material for the motor mounts?
I'm assuming it is 6061 1/2 thick mill finish...
Does anyone have the print on this project?
If I can be some help with the g codes or fixture plate let me know...
John
52 matches
Mail list logo
