It was interesting help in all aspects.
World is theater and people actors. So we all play some role.
It did not discourage me.
Why?
Less than 7 month ago The United States Government could not find smart
contractor to make gov. health care web to work properly. We are talking
about The
About
/
Speaking of expense, how much are you paying the folks here? Nothing?!?
I counted 116 posts in this thread, but it seems like you won't even
do basic reading that is pointed out to you to understand the system
better. That is like going to the doctor, demanding
2014-06-11 11:00 GMT+03:00 a k pccncmach...@gmail.com:
I said - if you help me - it does not give you permission call me stupid -
brainless -- use your grey cells etc.
Be human and respect yourself and other!
is this a lot to ask?
At least 4 different replies were provided about correct way
about
//
why would anyone reply to your questions after you have
shown such an ignorance to their attempt to help?
///
i do not ignore any one.
i did not post here to *aggravate any one.*
*last time i open hal in 2007 and after that 4
If you are not getting it after this lengthy exchange, offer to pay
someone to do it for you.
Write a specification for what you want to do and then ask for bids for
the work.
What you are doing now is not working.
It appears that you, and the other people who are attempting to help
your are
People have rights to stop responding. that is their rights. no problem
there.
again and again - *people have no rights to call anyone -* stupid -
brainless -- use your grey cells etc
or/and give smart remarks -giving a man a fish versus teaching him, how
to catch a fish.
is this hard to
On 11 jun. 2014, at 20:11, a k pccncmach...@gmail.com wrote:
People have rights to stop responding. that is their rights. no problem
there.
again and again - *people have no rights to call anyone -* stupid -
brainless -- use your grey cells etc
or/and give smart remarks -giving a man a
///
I think you should control your anger.
Never seen anybody calling you stupid or brainless. Neither seen anybody
being disrespectful to you.
you free to take any position.
everyone can read and see who can and who can not control anger or better
who has anger at all.
just
(EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
I did experiment and input 3 lines
/
setp scale.0.gain 0.00034483
setp scale.0.offset -0.4172
net scaled-percent scale.0.out=motion.adaptive-feed
You need to add the scale component to the hal file
On 6/10/14 11:43 , a k wrote:
i did add this file also
have error
...
Debug file information:
...
hm2-servo.hal:205: Can't find module 'scale=1' in
/usr/realtime-2.6.32-122-rtai/modules/linuxcnc
That's your error ^^
You made a typo in your hal file.
--
Sebastian Kuzminsky
2014-06-10 20:43 GMT+03:00 a k pccncmach...@gmail.com:
hm2-servo.hal:205: Can't find module 'scale=1' in
Take a look at line number 205 in you HAL file
Viesturs
--
HPCC Systems Open Source Big Data Platform from
i need have
loadrt scale count=1
forgot count
and now i have
/
Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
On 6/10/14 12:17 , a k wrote:
i need have
loadrt scale count=1
forgot count
and now i have
/
Ok, so read the error message.
Which line number is it telling you your bug is on?
What does that line say, and what should it say?
--
Sebastian Kuzminsky
On 10 June 2014 19:17, a k pccncmach...@gmail.com wrote:
Do you actually bother reading any of the error reports?
HAL: ERROR: function 'scale' not found
There is the error.
The manpage:
http://www.linuxcnc.org/docs/html/man/man9/scale.9.html
Tells you what the function is called.
--
atp
If
Error
hm2-servo.hal:206: addf failed
2562
line 206
---addf scale servo-thread
i need add scale
i need ---*loadrt scale [count=**N**|names=**name1**[,**name2...**]]---*
*i have loadrt scale count=1*
*is this answer ?*
*than i need ---**scale.**N* (requires a
On 10 June 2014 19:58, a k pccncmach...@gmail.com wrote:
i never done anything like that
http://www.linuxcnc.org/docs/html/hal/basic_hal.html
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
2014-06-10 21:17 GMT+03:00 a k pccncmach...@gmail.com:
hm2-servo.hal:206: addf failed
This thread has been around for more than a week and basically is not
moving forward, because lots of different answers are provided
basically for the same question over and over again. This reminds me
the
Basically I have a small dictionary (link to HAL) and I need to write –
very good poetry – story and without mistakes – otherwise it – program will
not work.
If one can read dictionary and grammar book than he can write poetry/
story/novel book in any language!!!
This is Great attitude!
Need
interesting point Viesturs Lācis
https://plus.google.com/u/1/110435321687535631572?prsrc=4about giving a
man a fish versus teaching him, how to catch
a fish.
i can recommend you to use it when you next time need to see doctor or go
to hospital.
point - you can learn how to fix yourself - be your
On 10 June 2014 22:21, a k pccncmach...@gmail.com wrote:
Basically I have a small dictionary (link to HAL) and I need to write –
very good poetry – story and without mistakes – otherwise it – program will
not work.
Except for the guy who wrote HAL _everybody_ else who has ever written
a HAL
On 06/10/2014 04:40 PM, a k wrote:
interesting point Viesturs Lācis
https://plus.google.com/u/1/110435321687535631572?prsrc=4about giving a
man a fish versus teaching him, how to catch
a fish.
i can recommend you to use it when you next time need to see doctor or go
to hospital.
point - you
On Tuesday 10 June 2014 17:21:38 a k did opine
And Gene did reply:
Basically I have a small dictionary (link to HAL) and I need to write
– very good poetry – story and without mistakes – otherwise it
– program will not work.
If one can read dictionary and grammar book than he can
On 9 June 2014 06:34, a k pccncmach...@gmail.com wrote:
i just switched two wires that go from TCHCAD to 7i33 and result is the
same
5V - 970.
0V--1220
That is all that i can do
right?
You have swapped the wrong wires.
Peter was talking about the input to the THCAD. ie, the connections
On Sun, 8 Jun 2014, a k wrote:
Date: Sun, 8 Jun 2014 22:34:28 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
i just switched two wires that go from TCHCAD to 7i33 and result is the
same
5V - 970.
0V--1220
That is all that i can do
right?
No, you need to switch the two wires that go to the THCADs P2
On 9 June 2014 19:27, a k pccncmach...@gmail.com wrote:
0VDC===1200-1220
5VDC===5549-5570
That's more like it.
Now, do you want 100% speed for 5V and 0% speed for 0V, or the other way
round?
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
Because feed control on axis start from 0% to 150%
i want to 0VDC be 0% feed and
5VDC correspond to 150% of feed
can i have that?
On Mon, Jun 9, 2014 at 11:32 AM, andy pugh bodge...@gmail.com wrote:
On 9 June 2014 19:27, a k pccncmach...@gmail.com wrote:
0VDC===1200-1220
On 9 June 2014 19:42, a k pccncmach...@gmail.com wrote:
Because feed control on axis start from 0% to 150%
i want to 0VDC be 0% feed and
5VDC correspond to 150% of feed
can i have that?
Yes.
Use the scale HAL component
http://www.linuxcnc.org/docs/html/man/man9/scale.9.html
And connect
On 9 June 2014 20:08, andy pugh bodge...@gmail.com wrote:
And connect the output to motion.feed-override.
http://www.linuxcnc.org/docs/html/man/man9/motion.9.html
Note that you need to enable feed-override with a G-code.
Sorry, I got that wrong. I was talking about motion.adaptive-feed
from previous e-mail
/
loadrt scale
...
addf scale.0 servo-thread
setp scale.0.offset -1220
setp scale.0.gain 0.4
net unscaled hm2_5i20.0.encoder.03.velocity scale.0.in
net scaled-percent scale.0.out ...
On 9 June 2014 20:27, a k pccncmach...@gmail.com wrote:
from previous e-mail
/
loadrt scale
...
addf scale.0 servo-thread
setp scale.0.offset -1220
setp scale.0.gain 0.4
net unscaled hm2_5i20.0.encoder.03.velocity scale.0.in
net
I did experiment and input 3 lines
/
setp scale.0.gain 0.00034483
setp scale.0.offset -0.4172
net scaled-percent scale.0.out=motion.adaptive-feed
///
linux did not start
and error
.
Starting LinuxCNC...
hm2-servo.hal:205: parameter or pin
On Mon, 9 Jun 2014, a k wrote:
Date: Mon, 9 Jun 2014 13:52:55 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
On 8 June 2014 04:21, a k pccncmach...@gmail.com wrote:
i did check with voltmeter again voltage on power into TCHCAD and it
4.89 to 4.88
this is from USB power
is this ok?
Close enough. But does your potentiometer setup also give you 0V?
I am wondering if you have the potentiometer wired up
let me make correction.
TCHCAD board has two power in terminals.
First --- to make board work.- and i use USB to do that. Voltage
reading between 4.89 to 4.88
Second to input variable Voltage from 0 up to +5V DC. i use for that
cell phone charger and potentiometer.
Yes, i can make 1 V DC 2 or
On 8 June 2014 19:20, a k pccncmach...@gmail.com wrote:
Yes, i can make 1 V DC 2 or 3 or 4 or 5 or anything between those figures
--V DC with potentiometer. Maximum reading of voltage from potentiometer
is 5 V DC.
And 0V input gives 1220 for encoder.03.velocity, and 5V input gives 970?
Can
On Sun, 8 Jun 2014, andy pugh wrote:
Date: Sun, 8 Jun 2014 20:06:49 +0100
From: andy pugh bodge...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed
---And 0V input gives 1220 for encoder.03.velocity, and 5V input gives 970?
yes
with scale 100.
setp hm2_5i20.0.encoder.03.scale 100
different scale gives different result.
about imagebin.ca
i can turn on camera and you can see all system -computer - wiring and
changing figures etc--- in real
:
On Sun, 8 Jun 2014, andy pugh wrote:
Date: Sun, 8 Jun 2014 20:06:49 +0100
From: andy pugh bodge...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users
On Sun, 8 Jun 2014, a k wrote:
Date: Sun, 8 Jun 2014 21:08:26 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
21:08:26 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
--Those numbers might be possible if the THCAD
On Sun, 8 Jun 2014, a k wrote:
Date: Sun, 8 Jun 2014 21:27:59 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
I would check the input connections (P2)--
what looks wrong - out of range
Hello
I did connect everything.
Card THCAD power ON i can see 1 led light is ON and second one blinking
every 1-2 second
i did check
--Then (if you are using Axis) Machine - Halmeter and look at the pin
-called hm2_5i20.0.encoder.03.velocity and you should see it change as
---the THCAD sees a
On 8 June 2014 02:43, a k pccncmach...@gmail.com wrote:
--Then (if you are using Axis) Machine - Halmeter and look at the pin
-called hm2_5i20.0.encoder.03.velocity and you should see it change as
---the THCAD sees a varying input voltage.
yes there is changing numbers
That's a good start.
change voltage from 0 to 5 change encoder velocity to 20% ( from 0.78 to
0.79)
with this range of 20% how i can change feed from 0-150%?
On Sat, Jun 7, 2014 at 6:43 PM, a k pccncmach...@gmail.com wrote:
Hello
I did connect everything.
Card THCAD power ON i can see 1 led light is ON and
with scale 100 range chage from 970 to 1220
On Sat, Jun 7, 2014 at 7:02 PM, andy pugh bodge...@gmail.com wrote:
On 8 June 2014 02:43, a k pccncmach...@gmail.com wrote:
--Then (if you are using Axis) Machine - Halmeter and look at the pin
-called hm2_5i20.0.encoder.03.velocity and you
On 8 June 2014 03:05, a k pccncmach...@gmail.com wrote:
change voltage from 0 to 5 change encoder velocity to 20% ( from 0.78 to
0.79)
with this range of 20% how i can change feed from 0-150%?
Something here isn't making sense. the THCAD ought to be linear.
If you connect a voltmeter to the
no it was 0.97 and 0.78
but with scale 100 numbers are 1220. and 970.- ( potentiometer from 0VDC to
5VDC)
On Sat, Jun 7, 2014 at 7:11 PM, andy pugh bodge...@gmail.com wrote:
On 8 June 2014 03:05, a k pccncmach...@gmail.com wrote:
change voltage from 0 to 5 change encoder velocity to 20% (
On 8 June 2014 03:10, a k pccncmach...@gmail.com wrote:
with scale 100 range chage from 970 to 1220
loadrt scale
...
addf scale.0 servo-thread
setp scale.0.offset -970
setp scale.0.gain 0.4
net unscaled hm2_5i20.0.encoder.03.velocity scale.0.in
net scaled-percent scale.0.out ...
--
atp
If you
i want to understand what should i do
//
add this lines
/
addf scale.0 servo-thread
setp scale.0.offset -970
setp scale.0.gain 0.4
/
to file hm2-servo.hal?
/
what should i do with this line?
net unscaled
On Saturday 07 June 2014 22:11:52 andy pugh did opine
And Gene did reply:
On 8 June 2014 03:05, a k pccncmach...@gmail.com wrote:
change voltage from 0 to 5 change encoder velocity to 20% ( from 0.78
to 0.79)
with this range of 20% how i can change feed from 0-150%?
Something here isn't
On 8 June 2014 03:34, a k pccncmach...@gmail.com wrote:
i want to understand what should i do
The first thing you should do is explain if this potentiometer is
going to be the control in the final system, or if it is just there
for testing.
Then you should check that the voltage on the actual
this potentiometer just to set system.
to see if it all working.
my target is:
0+5 V will control feed from 0% to 150%
with or without potenciometer system will work on 0+5V
.
I did put voltmeter on power in TCHCAD and it was 5VDC
it came from USB .
i did check with voltmeter again voltage on power into TCHCAD and it
4.89 to 4.88
this is from USB power
is this ok?
On Sat, Jun 7, 2014 at 8:12 PM, a k pccncmach...@gmail.com wrote:
this potentiometer just to set system.
to see if it all working.
my target is:
0+5 V will control feed from
hi
i did check pin 40 gnd and 43 vcc with voltmeter and i could not find +5V
power - any power
i did check +5V from power supply to see if voltmeter works
my cnc mill working everything is good but why i could not detect +5V from
pins 40 and 43?
On Wed, Jun 4, 2014 at 2:03 AM, andy pugh
actually i am using breaker board that takes 50 pin connector from 7i33 and
on other end 4 db 25 connectors that fit sd 94 amplifier that i am using.
http://www.servodynamics.com/digital_servo_drives.html
maybe some problem here in finding correct corresponding pin?
On Fri, Jun 6, 2014 at 2:02
On 6 June 2014 10:02, a k pccncmach...@gmail.com wrote:
i did check +5V from power supply to see if voltmeter works
my cnc mill working everything is good but why i could not detect +5V from
pins 40 and 43?
Maybe you are counting from the wrong end? Pin 1 has a square pad on the
reverse of
i need to know Amp that needs to use THCAD and i will buy any power supply.
i know that voltage regulator 7805 will drop 2-3 volts so i need 9v power
supply and amp to run THCAD.
also -any suggestion about --? -
On 4 June 2014 08:21, a k pccncmach...@gmail.com wrote:
i need to know Amp that needs to use THCAD
It is in the THCAD manual. But PCW has already said that you can run
the THCAD directly from the encoder 5V supply on the 7ii33. You don't
need a power supply.
THCAD pin 1 (top) - 7i33 pin 43
hi
do i need build this power supply
http://www.learningaboutelectronics.com/Articles/How-to-connect-a-voltage-regulator-in-a-circuit
for 5+ Vdc?
i think it is better to have exact 5v because it will effect final result
of feed control?
does this assemble will have enough power for my application?
On 3 jun. 2014, at 20:16, a k pccncmach...@gmail.com wrote:
hi
do i need build this power supply
http://www.learningaboutelectronics.com/Articles/How-to-connect-a-voltage-regulator-in-a-circuit
for 5+ Vdc?
i think it is better to have exact 5v because it will effect final result
of feed
want to supply power to board THCAD-10
On Tue, Jun 3, 2014 at 12:53 PM, Bas de Bruijn bdebru...@luminize.nl
wrote:
On 3 jun. 2014, at 20:16, a k pccncmach...@gmail.com wrote:
hi
do i need build this power supply
On Tue, 3 Jun 2014, a k wrote:
Date: Tue, 3 Jun 2014 11:16:22 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
On 3 June 2014 21:13, a k pccncmach...@gmail.com wrote:
want to supply power to board THCAD-10
It's a power supply, not a reference voltage. Just use whatever is
convenient (possibly 5V from a USB connector)
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
hi
do i need build this power supply
http
)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
hi
do i need build this power supply
http://www.learningaboutelectronics.com/Articles/How-to-connect-a-voltage-regulator-in-a-circuit
for 5+ Vdc?
i
On 3 June 2014 21:38, a k pccncmach...@gmail.com wrote:
i will use THCAD to control feed and i need to have external power supply
to see how feed will change with changing voltage - from 0 to 5V dc
What is the external power supply going to power?
--
atp
If you can't fix it, you don't own it.
On 2 June 2014 00:53, a k pccncmach...@gmail.com wrote:
this is axis that i add and i think that line that need to be replaced one
of 10-11-12-13-14
Adding an extra axis adds a lot more than it needed. You don't need
the PID and you don't actually have the extra axis.
Why not try doing it the
*Hi*
*about --*Why not try doing it the way I said?---
*I*'*m* only quessing about what you said because i do not understand that
programming language.
“Martian” language.
/
first -- only 2 files that I can change
1—5i20.ini
2—hm2-servo.hal
is this right?
On 2 June 2014 21:03, a k pccncmach...@gmail.com wrote:
need change it to
[HOSTMOT2]
CONFIG=firmware=hm2/5i20/SVST8_4.BIT num_encoders=4 num_pwmgens=3
num_stepgens=0
is this right?
Yes.
setp hm2_[HOSTMOT2](BOARD).0.encoder.03.counter-mode 1
Yes
or just add (setp
Hi
i did change to emc2 2.5 finished tuning and back to feed control.
the direction
/
1) Make sure that there is a spare encoder counter, find the relevant
line in the HAL file and change it:
loadrt hm2_pci config=num_encoders=4..
2)
hi
i start to loading
---Ubuntu 10.04 Lucid Lynx and LinuxCNC (current release)---
thanks
aram
On Tue, May 20, 2014 at 3:25 PM, andy pugh bodge...@gmail.com wrote:
On 20 May 2014 23:17, andy pugh bodge...@gmail.com wrote:
You _might_ be able to use a software encoder connected to the
I think that Steve was right about -written in Martian.
Yes I did read Integrators Manual first time in 2006 but I never saw
implementation – take this part – change to this and you will get this –
and this is working.
I remember Ray Henry show something at work shop but than time I was busy
On 20 May 2014 21:53, a k pccncmach...@gmail.com wrote:
At the beginning of this file, if it right one—loadrt hal_m5i20
I have no idea. That driver disappeared between versions 2.2 and 2.3.
It also has no velocity output pin, so won't do what you need.
I had not realised that you were using
On 20 May 2014 23:17, andy pugh bodge...@gmail.com wrote:
You _might_ be able to use a software encoder connected to the parallel port
A better solution is the ddt HAL component that could be used to
differentiate the position pin value to give a velocity.
--
atp
If you can't fix it, you
On 19 May 2014 02:23, Steve Blackmore st...@pilotltd.net wrote:
Rude Andy!
If you configure it once in 2008 why/how the hell would you remember
what you did then?
OK, perhaps Aram has had no requirement to change his LinuxCNC
configuration for the last 6 years.
To make the THCAD control feed
On 17 May 2014 22:32, a k pccncmach...@gmail.com wrote:
those CD disk was mark --- emc2.24 8.04 2008
many people from the list know what on those disk better than i do.
i load those software - from that disk-- did tune up my ac servo motor ,
wired my limit home switches and that is all.
not sure about -- yes i did assemble system on emc2 2008.
yes it working system.
i am not software engineer. i do not know how to configure software. i do
not know C or C++ .
to build emc2 working 3 axis system one does not need any software
---configureknowledge-experience.
is there manual
You must look at the integrators manual and look at the HAL components
that are available. You dont have to know C just how to read. You will
find all you need in the manuals.
Find the encoder component not the hostmot stuff. Use man encoder.
You will need some electronics that turn your 5v
On 18 May 2014 12:06, Marius Liebenberg mar...@mastercut.co.za wrote:
Find the encoder component not the hostmot stuff. Use man encoder.
He is using a 7i33, so the hostmot2 one is the correct one.
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
On 2014-05-18 13:29, andy pugh wrote:
On 18 May 2014 12:06, Marius Liebenberg mar...@mastercut.co.za wrote:
Find the encoder component not the hostmot stuff. Use man encoder.
He is using a 7i33, so the hostmot2 one is the correct one.
Sorry my bad, Solution is still the same I think. Does the
On Sun, 18 May 2014 10:04:17 +0200, you wrote:
On 17 May 2014 22:32, a k pccncmach...@gmail.com wrote:
those CD disk was mark --- emc2.24 8.04 2008
many people from the list know what on those disk better than i do.
i load those software - from that disk-- did tune up my ac servo motor ,
On 16 May 2014 23:15, a k pccncmach...@gmail.com wrote:
where i can find this part on my computer?
How did you create the original configuration? You only need to make
some very small changes to your existing HAL file.
--
atp
If you can't fix it, you don't own it.
About ---original configuration
in 2008 i was on CNC work shop at cardinal engineering.
i took disk that was available at work shop.
those CD disk was mark --- emc2.24 8.04 2008
many people from the list know what on those disk better than i do.
i load those software - from that disk--
On 05/17/2014 03:32 PM, a k wrote:
About ---original configuration
in 2008 i was on CNC work shop at cardinal engineering.
i took disk that was available at work shop.
those CD disk was mark --- emc2.24 8.04 2008
Why ON EARTH are you trying to use a SIX year-old version of
EMC2?
it work perfectly!
it runs on all PC desktop computers.
i am user of EMC2 my target commercial application and it works and it can
be 1 years old - if it works.
you are from theory play with emc2 you can change emc2 twice a day.
do not need to distract this conversation.
the target is use 0 +5
Sorry Jon
it was bad day for me
really sorry
On Sat, May 17, 2014 at 2:07 PM, Jon Elson el...@pico-systems.com wrote:
On 05/17/2014 03:32 PM, a k wrote:
About ---original configuration
in 2008 i was on CNC work shop at cardinal engineering.
i took disk that was available at work
so you want LCNC to output a 0-5v signal to control welding current
according to feed rate,
or you want feed to change according to welding current rate ?
Le 14/05/2014 23:06, a k a écrit :
Hi
right now i want to solve problem to connect THCAD-10 to EMC2 and all HAL
code.
what is source of
feed to change according to welding current rate
i think need put some logic - as default feed 100% or what ever set
manually on monitor, when current 0 amp.
when current go to 50% everything same way.
when current pass 50% and up to 100% feed will be slow down and at current
100% feed will be
Hi
i did look link to - encoder.
http://www.linuxcnc.org/docs/devel/html/man/man9/hostmot2.9.html#encoder
where i can find this part on my computer?
i went to
configs- m5i20 file browser--
i am in right direction?
and there 3 hal files
1-core servohal
2-m5i20 motion hal
3-m5i20 -io hal
On Fri,
Hi
about
that link
http://www.ebay.com/itm/12mm-Rotary-Encoder-Switch-Flat-Top-Knob-NEW-/201087207672?pt=LH_DefaultDomain_0hash=item2ed1bb48f8
it show encoders.
we talk about board THCAD-10 to convert 0 =5 V into signal that will be
connected to A signal of encoder on emc2.
why do i need encoder?
On 14 May 2014 20:00, a k pccncmach...@gmail.com wrote:
we talk about board THCAD-10 to convert 0 =5 V into signal that will be
connected to A signal of encoder on emc2.
why do i need encoder?
If you want an adjustable knob as an input to LinuxCNC then an encoder
is easier.
You haven't said
Hi
right now i want to solve problem to connect THCAD-10 to EMC2 and all HAL
code.
what is source of 0+5V dc - it will be generated by current or welding MIG
type of machine. I want to build CNC operated welding machine.
example my welder has 200amp max
so 0 amp --= 100% feed
and 200 amp --= 0%
hi
with Arduino Nano i can use USB to access EMC2 and control feed?
is this right?
thanks
aram
On Mon, May 12, 2014 at 3:12 PM, andy pugh bodge...@gmail.com wrote:
On 12 May 2014 21:46, a k pccncmach...@gmail.com wrote:
Can i use USB to go directly into EMC2 architect and control feed
or
On 13 May 2014 09:31, a k pccncmach...@gmail.com wrote:
with Arduino Nano i can use USB to access EMC2 and control feed?
is this right?
I am not 100% sure that it works out-of-the-box with a Nano, the
example uses a Diecimilia which has more analogue inputs (I think).
But with small changes
Just a small word of warning here. I did the analog input thing with the
Arduino. There is code on the wiki that already works well. BUT the
usb route is not reliable for critical applications. Due to the fact
that the usb is not hot pluggable, it will disappear from the devices
list with
On 13 May 2014 13:09, Marius Liebenberg mar...@mastercut.co.za wrote:
Just a small word of warning here. I did the analog input thing with the
Arduino. There is code on the wiki that already works well. BUT the
usb route is not reliable for critical applications. Due to the fact
that the
On 2014-05-13 14:41, andy pugh wrote:
On 13 May 2014 13:09, Marius Liebenberg mar...@mastercut.co.za wrote:
Just a small word of warning here. I did the analog input thing with the
Arduino. There is code on the wiki that already works well. BUT the
usb route is not reliable for critical
On 13 May 2014 13:51, Marius Liebenberg mar...@mastercut.co.za wrote:
Yes and then just do a lowpass filter with a rc on the input of an opamp
(voltage follower) to get a nice smooth dc voltage that is controlled by
the PWM.
No, this is a solution to the inverse problem, analogue voltage
1 - 100 of 121 matches
Mail list logo
