On Sat, 24 May 2008 22:11:47 -0500, you wrote:
I have set up lathe-type threading on my mini-mill, with a real
quadrature encoder on the spindle. It has 1728 lines, for 6912
quadrature counts/revolution. So, at 100 RPM, it provides
11,520 counts/second, or 11.52 counts/servo period,
Hello.
Has anyone managed to set a screw cutting lathe up successfully with
EMC2?
Mine is a simple setup. The encoder has 1ppr and also a disk with 48
slots. The problem is that the lathe carriage does not synchronise with
the spindle nicely - it overshoots and undershoots and by the time it
On Sat, 2008-05-24 at 13:49 -0400, [EMAIL PROTECTED] wrote:
Hello.
Has anyone managed to set a screw cutting lathe up successfully with
EMC2?
Mine is a simple setup. The encoder has 1ppr and also a disk with 48
slots. The problem is that the lathe carriage does not synchronise with
the
Kirk Wallace wrote:
On Sat, 2008-05-24 at 13:49 -0400, [EMAIL PROTECTED] wrote:
Hello.
Has anyone managed to set a screw cutting lathe up successfully with
EMC2?
Mine is a simple setup. The encoder has 1ppr and also a disk with 48
slots. The problem is that the lathe carriage does not
[EMAIL PROTECTED] wrote:
Hello.
Has anyone managed to set a screw cutting lathe up successfully with
EMC2?
Mine is a simple setup. The encoder has 1ppr and also a disk with 48
slots. The problem is that the lathe carriage does not synchronise with
the spindle nicely - it overshoots and
Kirk Wallace wrote:
On Sat, 2008-05-24 at 13:49 -0400, [EMAIL PROTECTED] wrote:
Hello.
Has anyone managed to set a screw cutting lathe up successfully with
EMC2?
Mine is a simple setup. The encoder has 1ppr and also a disk with 48
slots. The problem is that the lathe carriage does not
