Hello,
Well the HOME_SEARCH_VEL vs HOME_SEARCH_VELOCITY was the
problem. Thanks for that. I have homing working, life is good.
Emory Smith wrote:
Also, if you're getting good latency and performance from the laptop,
post that info here as well as model, mfgr, etc. Some laptops don't
work
On 17 Sep 2008 at 4:59, rtwas wrote:
Hello,
Well the HOME_SEARCH_VEL vs HOME_SEARCH_VELOCITY was the
problem. Thanks for that. I have homing working, life is good.
Emory Smith wrote:
Also, if you're getting good latency and performance from the
laptop, post that info here as
--J
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John Thornton
Sent: Wednesday, September 17, 2008 7:44 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] em2-review: homing
On 17 Sep 2008 at 4:59, rtwas wrote:
Hello,
Well
Hello,
Jason Vanick wrote:
You need to turn of SMI on the laptop if you have any hope in it working.
See the instructions at:
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?action=browsediff=1id=FixingSM
This page is blank.
Robert W.
Also, if you're getting good latency and performance from the laptop,
post that info here as well as model, mfgr, etc. Some laptops don't work
well for EMC or other things requiring timeliness.
E
On Sun, Sep 14, 2008 at 8:50 PM, rtwas [EMAIL PROTECTED] wrote:
Hello,
Emory Smith wrote:
Hello,
Emory Smith wrote:
There might also be a problem with the spelling in yours.
HOME_SEARCH_VELOCITY versus my HOME_SEARCH_VEL
OMG! You're right!
The laptop which holds emc2 is here but the cnc machine is
at the school. I'll change the spelling and try it next time I'm down there.
Hello,
I'm having trouble getting emc2 to home. My understanding is that if
(for a given axis section
in *.ini)
HOME_SEARCH_VEL and
HOME_LATCH_VEL are non-zero and
HOME_SEQUENCE is something appropriate (like 0) then emc2
will enter a home searching behavior when home or home all
buttons are
->
Re: [Emc-users] em2-review: homing
emc-users
-- Thread --
-- Date --
<!--
google_ad_client = "pub-7266757337600734";
google_alternate_ad_url = "http://www.mail-
->
Re: [Emc-users] em2-review: homing
emc-users
-- Thread --
-- Date --
<!--
google_ad_client = "pub-7266757337600734";
google_alternate_ad_url = "http://www.mail-