Peter C. Wallace wrote:
Can you verify that your parallel port supports and is configured for EPP
version 1.9 (1.7 will _not_ work)
After a little thinking, your symptoms (parallel port firmware load works but
communication with FPGA fails) suggests the possibiolity that your EPP port
is
: [Emc-users] hm2_7i43 hostmot2 loading - invalid cookie?
Peter C. Wallace wrote:
Can you verify that your parallel port supports and is configured for EPP
version 1.9 (1.7 will _not_ work)
After a little thinking, your symptoms (parallel port firmware load works but
communication with FPGA
Keil Hillman wrote:
-Original Message-
From: Sebastian Kuzminsky [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 16, 2008 2:21 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] hm2_7i43 hostmot2 loading - invalid cookie?
This probably means the FPGA is not running
Keil Hillman wrote:
-Original Message-
From: Peter C. Wallace [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 16, 2008 10:02 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] hm2_7i43 hostmot2 loading - invalid cookie?
(snip)
2. You are using a bitfile
1. I'll work on a better cable. I've got IDC26F connectors and some
spare 26 flat cable and will crimp up something shortly.
Cable is important
2. Yes. My 7i43 has FPGA XC3S200 (3s200tq144), I think this
equates to
7i43-2, card part# 7I43-U. I've noticed your updates
mesanet
Keil Hillman wrote:
5. So, has anyone got 7i43 200K board working with hostmot2 firmware,
SV8S.BIT or SVST4_4S.BIT?
Both of these BIT files work for me on the 200K board with the hostmot2
and hm2_7i43 drivers.
--
Sebastian Kuzminsky
Distances obtained as the speed of light multiplied by a
On Fri, 17 Oct 2008, Keil Hillman wrote:
Peter,
Thanks for additional info. I made up 26 lead ribbon cable with two
IDC26F connectors tonight and did some more testing.
1. New cable did not make any difference in firmware loading or
communication b/w host PC and 7i43 card.
Snip...
5.
I can't get hm2_7i43 and hostmot2 modules to init 7i43 card following
firmware load. Been working on this for past month thinking the problem
was hardware parallel ports, however the error seems to be the same
invalid cookie, got 0xBCFE80FE, expected 0x55AACAFE. The read data
or got 0xBCFE80FE
Keil Hillman wrote:
I can't get hm2_7i43 and hostmot2 modules to init 7i43 card following
firmware load. Been working on this for past month thinking the problem
was hardware parallel ports, however the error seems to be the same
invalid cookie, got 0xBCFE80FE, expected 0x55AACAFE. The read
On Thu, 16 Oct 2008, Keil Hillman wrote:
Date: Thu, 16 Oct 2008 00:55:01 -0700
From: Keil Hillman [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] hm2_7i43 hostmot2 loading - invalid
Thanks for the help. Some answers below.
-Original Message-
From: Sebastian Kuzminsky [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 16, 2008 2:21 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] hm2_7i43 hostmot2 loading - invalid cookie?
Keil Hillman wrote
Snip...
Also , I've loaded firmware via
sc7i43p.exe and read with rpo.exe using the same cable setup and return
value seemed reasonable. The DOS tools from Mesa have little or no
documentation regarding firmware verify, so I'm just guessing if loading
succeeded.
snip...
you might try
-Original Message-
From: Peter C. Wallace [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 16, 2008 10:02 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] hm2_7i43 hostmot2 loading - invalid cookie?
On Thu, 16 Oct 2008, Keil Hillman wrote:
Date: Thu, 16
sc7i43p.exe again.
Keil
-Original Message-
From: Peter C. Wallace [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 16, 2008 10:27 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] hm2_7i43 hostmot2 loading - invalid cookie?
Snip...
Also , I've loaded firmware
Could be any number of things, but looks like maybe a signal
integrity issue or incorrect bitfile to me.
1. What length and kind of cable connects the 7I43 to the PC?
(cable should be IEEE-1284 compatible or flatcable, other
printer cables may not have enough
grounds)
2. You are using a
15 matches
Mail list logo