Hi list
Am planning a 1.5m x 1.5m gantry style woodwork router. I have an old PII
computer running at 222 hz. I have loaded ubuntu + emc,
but can you tell me if I will be able to use it n a fairly basic router set up.
Thanks for your recent answers
Aaron
--
Powered by Outblaze
Hello,
Pete brings up an interesting point.
Is it allowed to issue some MDI commands while in e-stop reset or even
e-stop mode?
AXIS (the GUI) simply disables MDI while machine is not switched on.
TkEMC relies on task to do the right thing, and enables MDI and allows
users to send MDI commands,
Hi there,
Would my EMC2 system work with USB wireless networking? I'm thinking of
this because I could connect the USB wireless adapter to a USB extension
and position it for better reception. I'm just not sure if it would
work on my Ubuntu Linux EMC2 system. Another option would be a PCI
Hi Aaron
like in the Wiki described, about 500 MHz are O.K. my experiment with
slow computers are:
450 Mhz PIII with 512 MB RAM: Installation works (256 MB RAM failed
to install), takes time, Simulation O.K., but Halmeter and other
diagnostics painful slow.
1.1 GHz AMD, 512 MB RAM works
On Monday 06 August 2007, RogerN wrote:
Would my EMC2 system work with USB wireless networking? I'm thinking of
this because I could connect the USB wireless adapter to a USB extension
and position it for better reception. I'm just not sure if it would
work on my Ubuntu Linux EMC2 system.
While I can't comment on the wireless network other than it should work.
I do have some comments on steppers and encoders. Unless you have some
real high rent stepper drives capable of running your steppers at
rediculess micro step counts encoder feedback is poimtless. First thing
a proper
My opinion.
Possibly in e-stop reset, but NOT in e-stop itself. This is
a safety thing, if e-stop is generated by hardware NO
further operation should be possible until the operator
acknowledges the e-stop.
Steve Stallings
-Original Message-
From: [EMAIL PROTECTED]
On Mon, 6 Aug 2007, Dale wrote:
Date: Mon, 06 Aug 2007 08:40:26 -0400
From: Dale [EMAIL PROTECTED]
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] USB Wireless
Alex Joni wrote:
Hello,
Pete brings up an interesting point.
Is it allowed to issue some MDI commands while in e-stop reset or even
e-stop mode?
AXIS (the GUI) simply disables MDI while machine is not switched on.
TkEMC relies on task to do the right thing, and enables MDI and allows
On Monday 06 August 2007, Roland Jollivet wrote:
(second send,..)
Hi list
Concept query;
Looking at stepper drives, the general format seems to be 4 phases out, or
Dir+Step, obviously saving two I/O lines.
So why isn't a two phase signal used?. A 'quadrature' output?
- you still use two lines
10 matches
Mail list logo
