Hi everybody,
I have installed on my PC the Ubuntu 8.04 HH with EMC2 from the live
cd from linuxcnc.org.
After, i have updated my system to EMC 2.2.7 with the ubuntu update
manager, so I have updated
EMC2 and other 227 files (from critical update and other applications...).
Now when I try to load
On 13 Nov 2008 at 23:04, Jon Elson wrote:
John Thornton wrote:
Jon, do you have what you did on wiki or anyplace like that where I
can see what you did?
OK, in the .ini file, I added this one line to the [HAL] section :
HALUI =halui
and then, in my univpwm_io.hal
Please show us the list of kernel modules that are loaded immediately
after you log in but before you run emc.
You can do this by opening Applications Accessories Terminal, then
typing dmesg, then by pasting the result into your reply. The *top*
lines are probably going to be the important
When I first looked for the stepconf file, I always drilled down into the
folder itcreated thinking the inside it. I therefore thought I had a problem
because I could not find that file. I only to noticed later (after numerous
searches) that it was right in the top directory at the same level as
Roberto,
I suspect what is happening is that the real time kernel is not the default
kernel and the errors you are seeing are a consequence of not having a real
time kernel loaded. You can select the kernel on boot, on some systems you
may need to hit escape while grub is loading in order to
Hi all,
Does anyone have a Taig DSLS 3000 configuration they can share? I can
turn it on and get some simple motion but I don't think I know enough
about the Taig details to complete the stepconf setup.
Thanks in advance.
Tom Marshall
-Original Message-
From: Thomas L Marshall [mailto:[EMAIL PROTECTED]
Sent: 14 November 2008 10:08 PM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] question about taig 3000 setup
Hi all,
Does anyone have a Taig DSLS 3000 configuration they can share? I can
turn it on and
-Original Message-
From: Thomas L Marshall [mailto:[EMAIL PROTECTED]
Sent: 14 November 2008 10:08 PM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] question about taig 3000 setup
Hi all,
Does anyone have a Taig DSLS 3000 configuration they can share? I can
turn it on and
Roberto,
I have experienced this same issue with 8.04 installed from the live CD -
but it is occurring on EMC 2.2.6. I haven't allowed the upgrade to 2.2.7 to
occur, but I did install all the critical other apps.
I have found a work around - load EMC2 again! I only get the rtai_hal.ko
file
Hi
I want to be sure about setting G54.
“The coordinate system whose origin is set by a G10 command may be active
or inactive at the time the G10 is executed. If it is currently active,
the new coordinates take effect immediately.
Example: G10 L2 P1 x 3.5 y 17.2 sets the origin of the first
10 matches
Mail list logo
