(and set schema/font) every time I start up.
Any ideas?
--
Mike Rambo
[EMAIL PROTECTED]
NOTE: In order to control energy costs the light at the end
of the tunnel has been shut off until further notice...
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Tue, 2003-10-07 at 09:59, Rolf Pedersen wrote:
Mike Rambo wrote:
Ever since I upgraded my system from 8.1 to 9.0, and now 9.1, I have
found that settings are not saved with konsole (schema, fonts etc). It
looks like they should be saved in ~/.kde/share/config/konsolerc but it
doesn't
is
almost certainly not doing them anymore.
You seem to expect a lot out of them with regard to the updates. Does
anyone keep updates for a distro that far back? It would appear Mandrake
doesn't go back beyond 8.2 for current updates.
--
Mike Rambo
[EMAIL PROTECTED]
NOTE: In order to control energy
the
devfs stuff to work. Maybe Richard Gooch (lkml) will someday get devfs
working smoothly and it'll be the best thing since sliced bread but it
appears not ready for prime time right now IMHO.
/historical_quote
--
Mike Rambo
[EMAIL PROTECTED]
NOTE: In order to control energy costs the light
On Tue, 2003-08-19 at 08:02, Mike Rambo wrote:
On Mon, 2003-08-18 at 18:07, Jack Coates wrote:
About as OT as it comes, sadly...
I'm needing to use an RH system, and I find that urpmi has me massively
spoiled. Is there anything like it or a port of it for RH7.3? The old
rpmfind/google
Has anyone performed an upgrade from 9.0 to 9.1? Any problems or things
I need to watch for if I decide to go the upgrade route instead of a
fresh install?
Thanks.
--
Mike Rambo
[EMAIL PROTECTED]
*--*
NOTE: In order to control energy costs the light at the end
of the tunnel has been shut off
-computer - so
I'll have something to play with...
So - any hints/tips welcome ...
Cheers
Joerg
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Mike Rambo
a couple
of ML messages about editing a header file in squid and recompiling but
I hesitate to embark upon that adventure without knowing for sure that
it is really related to my problem.
Does anyone have any experience with this problem or know what that
error refers to?
Thanks.
--
Mike Rambo
Kwan Lowe wrote:
On Tue, 2003-04-01 at 07:42, Mike Rambo wrote:
We're running squid-2.4.STABLE7-2mdk on Mandrake Linux release 9.0
(dolphin) for i586. It's been running ok for a few weeks. I noticed this
morning numerous WARNING! Your cache is running out of filedescriptors
errors
Jim C wrote:
add user script = /usr/share/samba/scripts/smbldap-useradd.pl -w -d
/dev/null -g Machines -s /bin/false %u
The Machines group does exist doesn't it (not that I would know anything
about that mistake personally ;-)?
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack
)
packages too so I'd think newer versions would probably only improve
support. Don't know what effect newer versions may have on the steps
needed to make it work though.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
to do this. hosts files are fine right up
until you don't happen to get the same IP address from your DHCP server
at which time you'll find name resolution broken again.
Hope this clarifies...
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http
dhcpd.conf and go - you
won't have to remember to also change the startup script.
subnet 10.74.1.0 netmask 255.255.255.0 {
}
This declares a subnet but with no range dhcpd will not respond to
requests yet your default startup scripts will work ok.
Hope this helps.
--
Mike Rambo
[EMAIL
and go - you
won't have to remember to also change the startup script.
subnet 10.74.1.0 netmask 255.255.255.0 {
}
This declares a subnet but with no range dhcpd will not respond to
requests yet your default startup scripts will work ok.
Hope this helps.
--
Mike Rambo
[EMAIL PROTECTED
and go - you
won't have to remember to also change the startup script.
subnet 10.74.1.0 netmask 255.255.255.0 {
}
This declares a subnet but with no range dhcpd will not respond to
requests yet your default startup scripts will work ok.
Hope this helps.
--
Mike Rambo
[EMAIL PROTECTED
mode
# 2 - Multiuser, without NFS (The same as 3, if you do not have
networking)
# 3 - Full multiuser mode
# 4 - unused
# 5 - X11
# 6 - reboot (Do NOT set initdefault to this)
#
id:5:initdefault:
snip
change it to
id:3:initdefault:
and you'll boot to CLI
--
Mike Rambo
[EMAIL
Perhaps http://www.moregroupware.org - works from a browser...
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
gdm running but I didn't find any other obvious ways and this
one worked...
Mike Rambo wrote:
I have been wanting to set up some login scripting to mount per user
server shares from NT4 or Samba servers. After doing some reading today
on a different topic I ran across some information
using the
$HOME and $USER variables can accomplish what I'm trying to do on a
Redhat 7.x system. Is there any ONE location where scripting can mount
shares for any number of users on a Mandrake system?
Thanks.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft
Praedor Tempus wrote:
I am also a little leery of using linuxconf for this. It (linuxconf) appeared
to bork my attempts at wlan ad-hoc networking and I was told not to use it in
a wlan mailing list. In the past I have tried changing the hostname via
linuxconf with mucked up results. I
daRcmaTTeR wrote:
Mike,
apart from sheery confusion your point in that post was...what?
--
On Mon, 24 Jun 2002, Mike Rambo wrote:
Praedor Tempus wrote:
I am also a little leery of using linuxconf for this. It (linuxconf) appeared
to bork my attempts at wlan ad-hoc
Praedor Tempus wrote:
On Thursday 20 June 2002 07:26 am, Mike Rambo wrote:
Mike Rambo wrote:
Praedor Tempus wrote:
On Wednesday 19 June 2002 12:03 pm, daRcmaTTeR wrote:
Praedor Tempus wrote:
I am hesitant to try this again...I run postfix on my system as my
mta. I own
7000
PCI cards? Might I fare better getting the standard package
from the XFree86 project?
Thanks
Charles A Edwards wrote:
On Mon, 06 May 2002 15:10:58 -0400
Mike Rambo [EMAIL PROTECTED] wrote:
I have an IBM box (300PL) that has integrated S3 video.
My son wants better video so I've
7000
PCI cards? Might I fare better getting the standard package
from the XFree86 project?
Thanks
Charles A Edwards wrote:
On Mon, 06 May 2002 15:10:58 -0400
Mike Rambo [EMAIL PROTECTED] wrote:
I have an IBM box (300PL) that has integrated S3 video.
My son wants better video so I've
work. Just that when it's
turned on the pci one doesn't. Also look to see if it's set up for
AGP video only. This may also be the case.
FemmeFatale wrote:
Check bios, turn off on-board video.
--
Femme
Good Decisions You boss Made:
On Mon, 06 May 2002 15:10:58 -0400
Mike Rambo
work. Just that when it's
turned on the pci one doesn't. Also look to see if it's set up for
AGP video only. This may also be the case.
FemmeFatale wrote:
Check bios, turn off on-board video.
--
Femme
Good Decisions You boss Made:
On Mon, 06 May 2002 15:10:58 -0400
Mike Rambo
' but that also displayed garbage and froze.
Can anyone offer advice on how to get this to work?
Thanks...
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Jason Guidry wrote:
Mike Rambo wrote:
Hey, Before this thread goes away...where does the image come from. I
tried asking a similar question a while back...I wanted to boot several
mini-distros off the same disk. any insight on that?
To which image do you refer? The floppy
Jason Guidry wrote:
Mike Rambo wrote:
jipe wrote:
On Tue, 02 Apr 2002 08:23:06 -0500
Mike Rambo [EMAIL PROTECTED] wrote:
Maybe I'm just dense but how the heck do you create a
bootable CD these days.
i assume that the files and directories from which to create your iso image
but doesn't say where it needs to be.
Absolute paths don't find it which is totally confusing. The
CD-writing howto on LDP just points to the README.eltorito
file included with mkisofs.
What is the magic step here to make this work?
Thanks.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your
jipe wrote:
On Tue, 02 Apr 2002 08:23:06 -0500
Mike Rambo [EMAIL PROTECTED] wrote:
Maybe I'm just dense but how the heck do you create a
bootable CD these days.
i assume that the files and directories from which to create your iso image are in a
directory named to_be_burnt
unresponsive many times.
--
Mike Rambo
[EMAIL PROTECTED]
daRcmaTTeR wrote:
On Mon, 25 Mar 2002 19:40:45 -0500
ed tharp [EMAIL PROTECTED] studiouisly spake these words to ponder:
do you have a 3com or US robotics modems?
On Monday 25 March 2002 09:05, you wrote:
Mike Rambo wrote:
I
if any (I think I last checked for new updates in late
January).
--
Mike Rambo
[EMAIL PROTECTED]
civileme wrote:
daRcmaTTeR wrote:
Mike Rambo wrote:
I have a machine set up at to facilitate sharing of a dial
up connection for my home network. I am finding that pppd
will suddenly die
). I don't see anything in the logs to indicate any
problems. Are there any experts out there that can comment
on why this might be happening?
Thanks.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
addresses here
subnet 10.8.24.0 netmask 255.255.255.0 {
}
Hope this helps.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Regards
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
other than suggesting that I learn iptables and write my
own rules?
Have you tried pmfirewall? My co-worker used it on his box.
It was easy to set up and nmap found nothing when I ran it
against the box afterward.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from
Larry Sword wrote:
Mike Rambo wrote:
I just built a new box to replace my mdk 7.1 workstation
When it rebooted I found that the wheel mouse worked ok in
most things but netscape now has only black and white icons.
Maybe as a result of your monitor resolution settings. As I recall
Mark Weaver wrote:
On Fri, 15 Feb 2002 11:17:50 -0500
Mike Rambo [EMAIL PROTECTED] thoughtfully uttered these words to
ponder:
Any idea where it all falls apart?
I set up another mdk8.1 box yesterday and, after seeing your message,
paid pretty close attention to what I did
Mark Weaver wrote:
On Mon, 18 Feb 2002 08:04:02 -0500
Mike Rambo [EMAIL PROTECTED] thoughtfully uttered these words to
ponder:
It's telling you it can't find a visor on the port at /dev/visor -
this is the error I had before I shut down devfs and configured things
as I indicated
the hot sync
button THEN click the sync button in jpilot.
My Visor Platinum works every time. I also have a laptop that does have
all the security updates and it works too implying that none of the
updates break this in any way.
Hope this helps.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your
devfs = nomount or some such in
lilo.conf) and use the hard coded links to get the Handsprings to sync
via USB.
I know I've read numerous messages where folks have had no problem with
devfs, even some in this thread. But it does appear problematic to me.
YMMV.
--
Mike Rambo
[EMAIL PROTECTED
-1.3.22_1.25_01-1.4mdk
mod_perl-devel-1.3.22_1.25_01-1.4mdk
mod_ssl-2.8.5-1.4mdk
mm-1.1.3-8.1mdk
Thanks.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
-1.3.22_1.25_01-1.4mdk
mod_perl-devel-1.3.22_1.25_01-1.4mdk
mod_ssl-2.8.5-1.4mdk
mm-1.1.3-8.1mdk
Thanks.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
. What are you trying to accomplish?
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Luck. I hope some of this applies to the palm unit.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Opps, a couple of errors below ***
Mike Rambo wrote:
Roger Munoz wrote:
Hi
Has anybody managed to get the palm m505 usb cradle to work with jpilot in
MDK8.1?
Roger
FWIW - our experience with the visor usb cradle and jpilot since I
haven't seen a response, to the list
xlib which didn't
fix the problem. Anyone know what the error means and how to fix it?
Thanks
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
was messing with doesn't have 3d
graphics which explains why it wouldn't work there. My co-workers box
has an 8MB ATI 3d rageII+ pci card. The 8.1 installer loaded XFree4 by
default. I'll make sure that glx and dbe is being loaded as a couple of
folks have suggested and go from there.
--
Mike Rambo
of antique autos and parts.
Linux- Coming Soon To A Desktop Near You
Registered Linux User #183936
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
?
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
! Mike
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Mike Rambo
Sent: Tuesday, October 23, 2001 5:55 AM
To: [EMAIL PROTECTED]
Subject: [expert] dual booting with Win2k
One of the guys I work with is interested in putting Mdk8.1
. Are there any gotcha's or problems in doing this -
particularly since 2000 uses it's own boot loader?
Thanks.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
note: i had some problem cause mdk inserted some strange lines in the
lilo/grub conf file. mdk added some lines for mapping the hard disk device.
i deleted these lines and now all works correctly
Regards
Andrea Fabris
- Original Message -
From: Mike Rambo [EMAIL PROTECTED]
To: [EMAIL
|
+---+
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go
Message-
|From: [EMAIL PROTECTED]
|[mailto:[EMAIL PROTECTED]] On Behalf Of Mike Rambo
|Sent: Thursday, October 18, 2001 1:53 PM
|To: [EMAIL PROTECTED]
|Subject: Re: [expert] iso's md5sum's
|
|Sergio Korlowsky wrote:
| Did you download the md5sum file from
]] On Behalf Of Mike Rambo
|Sent: Thursday, October 18, 2001 1:53 PM
|To: [EMAIL PROTECTED]
|Subject: Re: [expert] iso's md5sum's
|
|
|Sergio Korlowsky wrote:
|
|
| Did you download the md5sum file from ftp.rpmfind.net or still using
| the same old file.
|
| I ask you
|
|
|
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
- rsync says it's all fine but the md5sums
still do not match. I'm burning the iso's to CD anyway and then I'll see
whether they're useable.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
choice...
DO NOT trust yours unless the MD5 sums match.
-JMS
|-Original Message-
|From: [EMAIL PROTECTED]
|[mailto:[EMAIL PROTECTED]] On Behalf Of Mike Rambo
|Sent: Thursday, October 18, 2001 1:53 PM
|To: [EMAIL PROTECTED]
|Subject: Re: [expert] iso's md5sum's
|
|
|Sergio
From msdos you can also run debug.exe and...
fcs: 200 400 0
a
mov ax,301
mov bx,200
mov cx,2
mov dx,80
int 13
int 20
[press the ENTER key here]
g
q
and it'll blitz ddo's and whatnot (along with all the rest of the drives
content).
--
Mike Rambo
[EMAIL PROTECTED]
Dianne Marie Montesa wrote
the limited set of internal models that will
work with Linux.
Hope this helps.
--
Mike Rambo
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://.mandrakestore.com
but I
haven't had a problem since installing the mdk7.2 packages.
Hope this helps.
Mike Rambo
Want to buy your Pack or Services from MandrakeSoft?
Go to http://.mandrakestore.com
the
driver may be able to correctly detect them. Aside from this I'm about
out of ideas - seems like some of this should have worked.
Anyone else out there with an idea?
Is it because of my cheap hardware that I can't change irq?
Probably not.
--
Mike Rambo
[EMAIL PROTECTED]
-PIC ide1
NMI: 0
ERR: 0
Hope this helps.
--
Mike Rambo
[EMAIL PROTECTED]
be able to use for this purpose. I don't have any settings like
this on the one laptop I have linux running on but then it doesn't have
any sound devices to conflict either.
Hope this helps (and isn't a wild goose chase).
--
Mike Rambo
[EMAIL PROTECTED]
X - A - W - K wrote:
Hi,
I have LM 8.0
returned above.
I have been seeing the exact same error with /dev/ttyS1 (my mouse is on
ttyS0). Sad to say, though the APC software purports to support any
serial port I (also) have never gotten it to work on any.
--
Mike Rambo
[EMAIL PROTECTED]
. Be sure to 'rpm --rebuilddb' after you upgrade.
Hope this helps.
--
Mike Rambo
[EMAIL PROTECTED]
needed to run the database server I could have
the screensaver kick in a minute later with password protection enabled.
--
Mike Rambo
[EMAIL PROTECTED]
in to accept connections as the correct user to start the
Wine/Faircom combination. Only then will Wine actually start. I can get
Wine to start automatically when I manually log into the GUI but I
cannot start the X session (already logged in) automatically.
-Original Message-
From: Mike Rambo
to make it work. I have
had similar experiences with the other apps I've tried (although that is
only a couple of packages).
Hope this helps.
--
Mike Rambo
[EMAIL PROTECTED]
(although wildcards work for the install/freshen/uprade commands
which could make the command shorter).
Hope this is helpful.
--
Mike Rambo
[EMAIL PROTECTED]
but that won't
work either although it crashes with a bunch of entirely different
errors.
Anyone have any ideas what I can do to fix this?
--
Mike Rambo
[EMAIL PROTECTED]
Try the rpm package from MDK7.2. It is version 3.0.5-27mdk and is
capable of reading v4 rpm's. Check out the hint at the bottom of this
URL for more info.
http://www.mandrakeuser.org/docs/troubles/tquick5.html
--
Mike Rambo
[EMAIL PROTECTED]
Christian Rost wrote:
Hi,
as did RedHat
the whole process.
Hope this helps.
--
Mike Rambo
[EMAIL PROTECTED]
install failed exit status 127
I haven't been able to check the Dell install for similar entries yet.
/var/log/messages and /var/log/XFree86.0.log show nothing helpful
either.
Anyone have any insight on this problem?
--
Mike Rambo
[EMAIL PROTECTED]
o problems with
that either so long as I built Mysql from source instead of installing a
precompiled binary. I did run into a missing library problem when I
first tried using one of the binaries from the Mysql site. Try the
sources.
Regards,
--
Mike Rambo
[EMAIL PROTECTED]
back up but none of them work. I guess I'll have to re-enter
them all manually.
Thanks for the help.
--
Mike Rambo
[EMAIL PROTECTED]
. Look
in /etc/sysconfig/network and you'll find another place for the hostname
though.
--
Mike Rambo
[EMAIL PROTECTED]
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
what I'd find.
Ping said there was nothing there.
?????
--
Mike Rambo
[EMAIL PROTECTED]
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
violations with Samba shares that shouldn't be occuring. I haven't been
back on location yet so I don't know for sure. That's for later this
afternoon.
--
Mike Rambo
[EMAIL PROTECTED]
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
is locked
out. The error (as I recall) is something to the effect of "error
opening files" which of course doesn't give much to go on.
Any idea what's happening here or where I can look for clues?
--
Mike Rambo
[EMAIL PROTECTED]
Keep in touch with http://mandrakeforum.com:
Jim Holthaus wrote:
On Thu, 19 Oct 2000, Mike Rambo wrote:
the box refused to start the dhcp server daemon
with the error that it couldn't bind to the IP address because it was
already in use. There is and was nothing else on the same IP address as
the server but the only way I
t it has worked ever since
- I think I've reinstalled three times since then to test various
things. You might give this a try.
Regards.
--
Mike Rambo
[EMAIL PROTECTED]
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
with staroffice anyway.
Thanks.
--
Mike Rambo
[EMAIL PROTECTED]
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
?
--
Mike Rambo
Media Electronics Specialist
Lansing School District
too.
--
Mike Rambo
Media Electronics Specialist
Lansing School District
/dialondemand.htm
--
Mike Rambo
Media Electronics Specialist
Lansing School District
/dialondemand.htm
--
Mike Rambo
Media Electronics Specialist
Lansing School District
/dev/null wrote:
Does anyone have any experience with running Linux on Compaq Prosignia?
Any web sites, etc...?
We're running Proliants but the following site references Prosignia's
too.
http://www.geocities.com/rlcomp_1999/
Regards,
--
Mike Rambo
Media Electronics Specialist
substitute for a
separate, very tight and restricted, firewall.
Hope this helps.
--
Mike Rambo
Media Electronics Specialist
Lansing School District
[EMAIL PROTECTED]
and tried to figure out diald once but with no success. Anything you
(or anyone else) can offer?
--
Mike Rambo
Lansing School District
directions.
--
Mike Rambo
Lansing School District
he service is running if
you don't connect.
--
Mike Rambo
Lansing School District
to set up
stuff such as this. As long as 'play' is in your path the rest looks
right. You might look at...
http://www.redhat.com/support/docs/howto/
...as there is a blurb about cron there.
--
Mike Rambo
Lansing School District
Andrew George wrote:
On Mon, 31 Jul 2000, Mike Rambo wrote:
0,10,20,30,40,50 * * * * /path/to/do/something
will make something happen every 10 minutes.
Just wondering...wouldn't
0-50/10 * * * * /yourcommand
Accomplish the same thing? Or do I need to read that MAN page again
maybe every
30 minutes or on specific dates like appointment
reminders if this is possible.
Thanks
Vic
0,10,20,30,40,50 * * * * /path/to/do/something
will make something happen every 10 minutes.
--
Mike Rambo
Lansing School District
(with different systems) and have never been
able to get it to work but this is the first time I've never found a
way around the problem. Thus far I'm simply unable to put Mandrake on
this machine. I can't locate any updates that would appear to address
this problem. Any ideas?
--
Mike Rambo
Lansing School
but I cannot get mdk71 to work as I've
described. Any idea's?
Thanks.
--
Mike Rambo
Lansing School District
1 - 100 of 103 matches
Mail list logo
