[Flexradio] Flex 1500 Service Manual

Is the service manual for the Flex 1500 available yet? If not, is there an ETA? 73, Clay W7CE ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives:

[Flexradio] Blog Update on Debugging Unco-operative Systems

I just posted a blog that details the steps I take in debugging those obstinate computers that do not play nicely with your new radio. Please read and if you have suggestions, let me know! Link is: www.abrohamnealsoftware.com/blog/ 73 Neal Campbell Abroham Neal Software

Re: [Flexradio] Blog Update on Debugging Unco-operative Systems

Thanks Neal. You are an excellent resource, as always. Mike - AA8K On 08/18/2010 12:51 PM, Neal Campbell wrote: I just posted a blog that details the steps I take in debugging those obstinate computers that do not play nicely with your new radio. Please read and if you have suggestions,

Re: [Flexradio] Flex 1500 Service Manual

I asked about this a while ago and was told it probably would not be released until about 1 year after the release of the hardware. This is in order to protect IP. I was told that the engineers at FlexRadio Systems could answer any technical questions I had specific to my application, but that I

Re: [Flexradio] Multitasking while running 5000A--or dedicated computer ?

I should have added, that to run extra I added an extra video card and use three monitors. -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dan Jean Sent: Thursday, August 19, 2010 10:26 AM To: Flex Reflector Subject:

Re: [Flexradio] Multitasking while running 5000A--or dedicated computer ?

I will be fine. Just get a good 1394a Firewire card with a TI chipset and don't rely on the integrated Firewire interface if the PC has one. Just disable the on-board Firewire interface in the BIOS. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz

[Flexradio] Flex 1500 Power out

Received my Flex 1500 Monday-wow so far for the most part impressed. The prwer out meter seemed a little stingey so I put it into my HP 8920 serveic monitor and read at least 5+ watts on all HF bands in ssb yet the meter in the program has never shown more than 2 watts and usually 1.5 or so. Is

Re: [Flexradio] Flex 1500 Power out

Methinks you are not using the latest version of PowerSDR. You need to load PowerSDR 2.0.8. http://support.flex-radio.com/Downloads.aspx?id=348 http://support.flex-radio.com/Downloads.aspx?id=349 -Tim -Original Message- From: flexradio-boun...@flex-radio.biz

Re: [Flexradio] Multitasking while running 5000A--or dedicated computer?

I built an i7-860 machine running 64-bit Win7 Ultimate in December for my 5000A. In addition to PowerSDR, Ham Radio Deluxe, DDUtil, a couple of web browsers (with lots of tabs open), a VNC connection to my Linux machine and WSJT for meteor scatter and moonbounce digital modes, I am also

Re: [Flexradio] Multitasking while running 5000A--or dedicated computer ?

I have an AMD-based 6-core system I recently built. Very comparable to what Neil Campbell sells as a mid-performance system. Lots of RAM is important. Works terrific with all kinds of multi-tasking. You can turn on the Microsoft performance monitor and see it all play. When PowerSDR is

Re: [Flexradio] wow neal, thanks

I would take a backup so you can always go back to this status when you continue to experiment! Thanks! Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to