Willi Reppel wrote:
Dave
Make sure that the volume control on your MP3+ is turned to position
max to get output from the transmitter.
vy 73 de SM6OMH Willi
I thought that only controlled the headphone socket?
Dave (G0DJA)
___
FlexRadio
Eric Wachsmann wrote:
Dave,
This reminded me of something. You won't get good audio output if you have
something plugged into both the Line Out and the headphone output on the
MP3+. This will load down the output and you'll get very little drive out
of the radio. Perhaps this was the
]; flexradio@flex-radio.biz
Sent: Thursday, September 21, 2006 9:26 AM
Subject: Re: [Flexradio] Which way round?
Willi Reppel wrote:
Dave
Make sure that the volume control on your MP3+ is turned to position
max to get output from the transmitter.
vy 73 de SM6OMH Willi
I thought that only
Willi Reppel wrote:
Dave,
Here another hint. Plug your headphone or speaker directly into the phone
connector of your MP3+ and press TUNE on the console. Now you should hear a
tone with a frequency corresponding to your setting in the
Setup/DSP/Keyer/CW pitch.
Thanks for the advice
Whilst my SDR1000 is away being repaired, I have been looking at the
connections between the Soundblaster MP3+ and the radio.
Line in when to line in and line out to line out, so that's OK, but
checking the red and white connectors shows that the red is connected to
the ring (middle
'R'ed 'R'ing.
Phil, K3IB
- Original Message -
From: David Ackrill [EMAIL PROTECTED]
To: flexradio@flex-radio.biz
Sent: Wednesday, September 20, 2006 1:27 PM
Subject: [Flexradio] Which way round?
Whilst my SDR1000 is away being repaired, I have been looking at the
connections
, September 20, 2006 9:28 PM
Subject: Re: [Flexradio] Which way round?
That's a relief then.
The only time it really mattered, for me, was Red on the Right at the
Rear. Which indicated that the Red phase went to the right hand lug of
an 11kV triff box as you looked at it from the back
FlexRadio Systems
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
radio.biz] On Behalf Of Willi Reppel
Sent: Wednesday, September 20, 2006 4:35 PM
To: David Ackrill; Philip M. Lanese
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Which way round?
Dave
Make
8 matches
Mail list logo