Not sure I can even describe this issue properly but I've got my Flex 1500
running fine with Writelog controlling the SDR and VAC running the CW reader.
But when I fire up Writelog's CW keyer it keys the SDR but doesn't create a dot
or dash. Similarly I had problems getting MMTTY to send
Peter - VE3HG ve...@cogeco.ca wrote:
But when I fire up Writelog's CW keyer it keys the SDR but doesn't create
a dot or dash. Similarly I had problems getting MMTTY to send properly. It
would key the SDR but the tones were indecipherable.
Sounds like a sound card issue expect the VAC seems
I was in the FP Run for the Bacon last nite calling CQ and my bestest buddy
Curt , WA2JSG said he could hear my signal on 3 different frequencies .
YIKE . Randy and Werner also during the WES noted that. Then someone from the
Flex group said I could be heard in 10 different spots.
CHANGES
: [Flexradio] CW issues
I was in the FP Run for the Bacon last nite calling CQ and my bestest buddy
Curt , WA2JSG said he could hear my signal on 3 different frequencies .
YIKE . Randy and Werner also during the WES noted that. Then someone from the
Flex group said I could be heard in 10
George, how far apart were the images? One simple explanation is that your
signal could be modulated by 60 hz hum. This is observed frequently on WSPR,
where the receiving station can detect signals that are too weak to be
audible. Try it again with somebody near, who hears you S9, and see how far
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] CW issues
I was in the FP Run for the Bacon last nite calling CQ and my bestest buddy
Curt , WA2JSG said he could hear my signal on 3 different frequencies .
YIKE . Randy and Werner also during the WES noted that. Then someone from
the Flex
: [Flexradio] CW issues
I was in the FP Run for the Bacon last nite calling CQ and my bestest buddy
Curt , WA2JSG said he could hear my signal on 3 different frequencies .
YIKE . Randy and Werner also during the WES noted that. Then someone from
the Flex group said I could be heard in 10
I was operating CW this evening using an external keyer - WKUSB -
without any problems. I then decided to try the CWX mode. I made Keys
Active and started typing some info and the radio started chattering -
probably the relay with no real power output. I went back to the
external keyer and
8 matches
Mail list logo
