A reset of the radio (and PowerSDR) is probably the simplest way to ensure
the relays are where they should be.
Eric Wachsmann
FlexRadio Systems
On Sun, Mar 29, 2015 at 4:04 AM, Nick Pugh K5QXJ quadp...@bellsouth.net
wrote:
Hello00 Flexers
I have a flex 5000 and I went to the maintenance
make sure your Antenna Matrix is set right for your installation in the
Antenna tab at the top of PowerSDR.
Bret
WX7Y
On Sun, Mar 29, 2015 at 3:04 AM, Nick Pugh K5QXJ quadp...@bellsouth.net
wrote:
Hello00 Flexers
I have a flex 5000 and I went to the maintenance panel and exercised the
Hello00 Flexers
I have a flex 5000 and I went to the maintenance panel and exercised the
tuner relays. I exited out of this screen and now it look like the antenna
is not connected to the radio.
What do you suggest I do to restore the radio to normal operation?
Thanks
Hi Mister Sterling!
I have, be glad to help.
73
Neal Campbell
Abroham Neal LLC
On Mon, Sep 23, 2013 at 3:34 PM, Steve Sterling f...@sgsterling.com wrote:
A few months back, a list member recommended RemAud (Remote Audio), a
made for ham ssb remote audio and ptt software agent for remote
A few months back, a list member recommended RemAud (Remote Audio), a
made for ham ssb remote audio and ptt software agent for remote audio
and ptt tool. Better audio than Skype, Teamviewer, etc and the ability
to key the ptt. (Yes, RemAud has a PTT timeout timer just in case).
I finally had
Hi all
I have a Flex3000 and up to now I've used N1MM with it just fine using the
guide at
http://flexradiowiki.abrohamnealsoftware.com/mw/index.php?title=N1MM
To recap, a pair for Com7-17 and 8-18. CW on Com7.
In N1MM I use Ctrl-K and pre-programmed F-keys for most of my QSOs, so
don't use any
-
From: Michael Ruttenberg mjruttenb...@gmail.com
Sent: Jul 6, 2013 7:55 PM
To: Flexradio@flex-radio.biz
Subject: [Flexradio] Help for CW keying in Wintest needed
Hi all
I have a Flex3000 and up to now I've used N1MM with it just fine using the
guide at
http
Question is about the proper Win7 firewire driver. I have a new to me Flex
3000 and the symptom I wish to correct is the following.
Firewire does not see the flex 3000 if it is powered down and the computer
left on when radio is repowered up. What I mean is if the radio flex 3000
the
Robert
Short Answer.
You should use the 1394 OHCI Compliant Host Controller (Legacy) driver
unless you know for certain
that another driver gives you better performance.
To find out which Driver you are actually using you have to look at
Device Manager.
You should find a Device type in the
Robert
Sorry I just opened both eye's 8-), and now see that you did state
PowerSDR 2.6.4 is what your running.
You stated the the Flex-3000 was new to you, and I don't know if you
have been using PowerSDR and Flexradio's successfully before the
difficulty started.
I don't have to reboot
Good Morning,
I’m doing a remote operation demo tomorrow morning for a community involvment
project at the local Staples store.
Remote using 5000A into a LDG AT600 Pro2 autotuner with CommCat at the qth
with CommCat Mobile on my Ipad2.
I have the turn radio on/off button macros working; but
Marty
ZZTU1; Tune on
ZZTU0; Tune off
ZZTOxxx; set tune power xxx=000 to 100
Dave W0DHB
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Marty
Sent: Friday, May 17, 2013 7:49 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Help Needed
Hi all
Outlook is causing latency issues with the flex running XP Pro. Outlook
causes the flex to go nuts. What has the community found out how to make
flex and outlook to run together
Thanks
Thanks
nick ARS K5QXJ EM30xa 30.1N 92.1W
Office 337 593 8700
Cell
Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Nick
Pugh
Sent: Monday, March 04, 2013 4:08 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Help with latency
Hi all
Outlook is causing latency issues with the flex running XP Pro. Outlook
causes the flex
Use Thunderbird, Windows Live, or one of the many web based Email programs.
On 3/4/2013 4:07 AM, Nick Pugh wrote:
Hi all
Outlook is causing latency issues with the flex running XP Pro. Outlook
causes the flex to go nuts. What has the community found out how to make
flex and outlook to
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Alan
Sent: Monday, March 04, 2013 7:58 AM
To: 'Nick Pugh'; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Help with latency
Nick,
Which version of Outlook? My ancient Outlook 2003 does cause a DPC spike, but
not enough to lose synchronization on either
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of
Alan
Sent: Monday, March 04, 2013 7:58 AM
To: 'Nick Pugh'; FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Help with latency
Nick,
Which version of Outlook? My ancient Outlook 2003 does cause a DPC spike,
but not enough to lose synchronization
I just got a new Macpro laptop with retina display. I installed Windows 7
bootcamp with no problem and seems to function fine. HOWEVER the GUI for
Powersdr does NOT display properly - it comes up fractured and while it runs
the radio it can't be used as it is. I am wondering if anyone else has
Mike
Have you adjusted the Text Size for Windows? If so, it will cause these
symptoms. The auto selection is Normal, leave it at that!
73
Neal Campbell
Owner
Abroham Neal LLC
Work:+1 540 645 5394
Mobile: +1 540 645 8171
On Fri, Jan 11, 2013 at 9:38 PM, Michael freem...@rogers.com wrote:
First lets start with the business end of things. I'm running the 5000A
with an iMac under Boot Camp. I've not yet upgraded Power SDR from 2.3.5.
Things have been running absolutely fine. This afternoon I powered
everything up and there are all sorts of problems.
1) ATU not activating
2) PTT for
: [Flexradio] Help with analyzing noise from waterfall and
panadapter
To set the waterfall color, click SETUP DISPLAY LOW LEVEL, etc.
Unfortunately, optimizing one band changes it for the other bands.
Jerry W4UK
down local noise problems. I have a 5000a with a 2nd
receiver. My
While this is not strictly Flex Radio, it occurs to me that there may be
someone on this reflector who knows something
about using the amazing capabilities of the graphic display to track
down local noise problems. I have a 5000a with a 2nd
receiver. My location is plagued with noise. While I
My flex running on xp and get the blue screen of death causing a reboot.
Dudley think it some hardware problem in my computer. The computer does fine
until I turn on the Flex 5k. The question is how to trouble shoot the
problem?
Thanks in advance
nick
From: quadp...@bellsouth.net
To: flexradio@flex-radio.biz
Date: Wed, 15 Aug 2012 04:35:29 -0500
Subject: [Flexradio] help with flex 5000
My flex running on xp and get the blue screen of death causing a reboot.
Dudley think it some hardware problem in my computer. The computer does fine
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Nick
Pugh
Sent: Wednesday, August 15, 2012 4:35 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] help with flex 5000
My flex running on xp and get the blue screen of death causing a reboot.
Dudley think it some hardware problem in my computer
...@bellsouth.net, flexradio@flex-radio.biz
Sent: Wednesday, August 15, 2012 9:40:30 AM
Subject: Re: [Flexradio] help with flex 5000
Hi Nick,
It suggests a Firewire Driver or Firewire H/W issue. The best way to diagnose
would be to process
the blue screen dump file.
Take a look at this. Feel free
It can also be a bad Firewire cable. You may think that's unlikely but I
had one and haven't had a single problem since replacing it a couple of
months ago. It failed suddenly after a month or more of successful use.
Doubting that could have been the problem, I replaced everything else
first,
, master of none, though often better than the master of
one.
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Rich
- W3ZJ
Sent: Wednesday, August 15, 2012 9:03 AM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] help
I have a similar rookie question...
I set my flex 1500 VAC1 to the windows sound driver that came up when you
clicked on it. Then I set DM780 to the same setting. Everything seems to be
working fine. DM780 decodes psk31 and rrty45 fine. I haven;t tried other
digital modes. I am not using any VAC
Is there someone who can mentor me with VAC? I have been reading docs, trying
examples from the Flex WIKI, doing trial-and-error etc., but still can’t get
audio I/O using VAC (V.4.12). Frustrated!
I am pretty sure VAC is working, since I can see activity in the VAC Control
Panel.
I have set up
I am trying to find a configuration file in Windows 7 64 bit . The
information I was given was The uninstaller does leave the ini file behind.
You can delete it if you like, it should be in roaming profiles or
similar.. I was able to remove the software through add/remove but I want
to delete
, April 22, 2012 6:21 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] HELP
I am trying to find a configuration file in Windows 7 64 bit . The
information I was given was The uninstaller does leave the ini file behind.
You can delete it if you like, it should be in roaming profiles or
similar
I know this isn't a VAC support forum, but everyone seems to use it so here
goes.
I purchased a copy of VAC last week. Uninstalled my demo version and installed
the full version. I'm going through How to Set Up VAC 4.x in the Flex
Knowledge Centre, and my copy of VAC shows one cable that
If you're running Windows 7, use Run as Administrator.
Jim KQ6EA
On 02/26/2012 10:37 PM, Ken Alexander wrote:
I know this isn't a VAC support forum, but everyone seems to use it so here
goes.
I purchased a copy of VAC last week. Uninstalled my demo version and installed
the full version.
Got the wrong part ID in the mail, my fault for not specifying it. Seems
confusing to me.
I am currently using FT-817 stock microphone with Flex 3000. Just got Heil
Proset 6 via UPS today, but it has AD-1Y adapter which is 9-pin circular.
What adapter do I need?How do I hook this up? I
-radio.biz
Subject: [Flexradio] Help plz - need part number for adapter to hook up Heil
Proset 6 to Flex 3000
Got the wrong part ID in the mail, my fault for not specifying it. Seems
confusing to me.
I am currently using FT-817 stock microphone with Flex 3000. Just got Heil
Proset 6 via UPS today
http://wd4elg.net
-Original Message-
From: Dave Beumer WØDHB [mailto:d...@w0dhb.net]
Sent: Wednesday, December 21, 2011 7:00 PM
To: 'Mark Lunday'; FlexRadio@flex-radio.biz
Subject: RE: [Flexradio] Help plz - need part number for adapter to hook up
Heil Proset 6 to Flex 3000
Mark
http
Rio Rancho, NM
- Original Message -
From: Mark Lunday wd4...@triad.rr.com
To: 'Dave Beumer WØDHB' d...@w0dhb.net; FlexRadio@flex-radio.biz
Sent: Wednesday, December 21, 2011 5:04 PM
Subject: Re: [Flexradio] Help plz - need part number for adapter to hook
upHeil Proset 6 to Flex 3000
I had to have my Dell DuoCore XP computer operating system removed and
reinstalled because of a BAD virus.
Now, I'm trying to get Power SDR 2.2.3 reinstalled.
The Release Notes say noting about installing in a completely new computer,
which essentially mine is at this point. They only refer
Forget it
Somehow, it's now working fine.
Not sure how or why. but who cares.
73,
Bill Tynan, W3XO
- Original Message -
From: Bill Tynan billandmat...@windstream.net
To: flexradio@flex-radio.biz
Sent: Saturday, December 17, 2011 1:40 PM
Subject: [Flexradio] HELP
I had to have my
You just run the PowerSDR (integrated) installer selecting all of the
defaults unless you have a FlexControl, then you have to select it
manually. It has everything integrated into it to install the radio;
skins, Firewire USB driver(s) and the PowerSDR executable.
If you run PowerSDR and
You must get the digitally signed drivers from the developer of VAC.
-Tim
---
Tim Ellison, W4TME
Product Management, Sales Support
FlexRadio Systems^(TM)
4616 W Howard Ln Ste 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web:
I tried to get Virtual Audio Cable to work under Windows 7 64 bit without
success. I followed a procedure to Download Elevated Command Prompt
Shortcut. I still could not get VAC driver to install. I now have in the
bottom right hand corner of my main screen a bit of white text that says
Test
Moderator: DDUtil Yahoo Group
http://groups.yahoo.com/group/DDUtil/
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:flexradio-bounces@flex-
radio.biz] On Behalf Of John Hansen
Sent: Tuesday, November 01, 2011 9:35 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Help
I've done a search of the knowledgebase, but I can't find anything that
covers exactly what I'm trying to do . I know lot's have you have done
this before and so I would really appreciate it if you would send me an
email with your setup. Here's where I'm at so far
1. I've got PowerSDR
On Tue, Nov 1, 2011 at 9:34 PM, John Hansen j...@coastalchip.com wrote:
I've done a search of the knowledgebase, but I can't find anything.am
having trouble configuring DDutil
===
John, the place to go with DDutil questions is the excellent DDutil forum:
...@gmail.com
To: Briann...@comcast.net
Cc:FlexRadio@flex-radio.biz
Subject: Re: [Flexradio] Help with digital
Message-ID:
CAKLh0Tdao5WSy7XgtrgogZcCDiE1-aixTc1M3q=cp=42zh3...@mail.gmail.com
Content-Type: text/plain; charset=ISO-8859-1
Better write Bill Gates! Its Windows doing it, you just
Have had digital modes working in the past. Was trying to snag T32C
yesterday on RTTY, but they
failed to copy me. Tried again this afternoon. Clicked on MMTTY and
after it came up, up popped:
Can't open Sound card (2)
Why has it forgotten? Where have I gone wrong?
Any clues out there in
Usually that means MMTTY has forgotten what the output and input sound card
assignments should be. Go to MMTTY Options and click on the Sound card tab
and see if they are set correctly for your system!
73
On Tue, Oct 11, 2011 at 6:58 PM, Brian n...@comcast.net wrote:
Have had digital modes
On 10/11/2011 22:58 PM, Brian wrote:
Have had digital modes working in the past. Was trying to snag T32C
yesterday on RTTY, but they
failed to copy me. Tried again this afternoon. Clicked on MMTTY and
after it came up, up popped:
Can't open Sound card (2)
Why has it forgotten? Where have I
Better write Bill Gates! Its Windows doing it, you just have to periodically
check to make sure its okay!
73
On Tue, Oct 11, 2011 at 10:20 PM, Brian n...@comcast.net wrote:
On 10/11/2011 22:58 PM, Brian wrote:
Have had digital modes working in the past. Was trying to snag T32C
yesterday on
AMEN Brother! I'll never forget my first (and only) look into the
megawatt-class PA at the Annapolis, MD, VLF transmitter site, NSS, during
the late 70's. It had THREE huge metal-ceramic tetrodes - Eimac X-2159's, I
believe - BOLTED into the chassis. Two of them were active (in parallel)
and
To: FlexRadio Reflector; flexe...@flex-radio.biz
Subject: [Flexradio] Help, I need help!
I just built an Elecraft KPA500 to drive with my Flex 5000. However,
I now have a serious problem.
I put the amp on the same shelf as the radio but every time I walk out of
the shack the 5000 tries to push
, October 02, 2011 8:24 AM
To: 'William H. Fite'; 'FlexRadio Reflector'; flexe...@flex-radio.biz
Subject: Re: [Flexradio] Help, I need help!
Bill,
Put a real radio, Valiant or DX-100, on the shelf between these two young
punks.
Have fun!
73,
Bill - W1MPY
-Original Message
Sent: Saturday, October 01, 2011 7:19 PM
To: FlexRadio Reflector; flexe...@flex-radio.biz
Subject: [Flexradio] Help, I need help!
I just built an Elecraft KPA500 to drive with my Flex 5000. However,
I now have a serious problem.
I put the amp on the same shelf as the radio but every
Hey! Don't knock that good old hollow state!
Jim
W4YXU
_
From: William H. Fite [mailto:omni...@gmail.com]
Sent: Sunday, October 02, 2011 3:57 PM
To: jim
Cc: Bill Marvin; FlexRadio Reflector; flexe...@flex-radio.biz
Subject: Re: [Flexradio] Help, I need help!
Wait, wait...I
I just built an Elecraft KPA500 to drive with my Flex 5000. However,
I now have a serious problem.
I put the amp on the same shelf as the radio but every time I walk out of
the shack the 5000 tries to push the KPA500 off on the floor. I've
installed sea rails but I need a better long term
Well, its very simple. The Flex need to be in the position of dominance, as
it deserves to be. Put the lowly amp some place below the Flex, some place
somewhat out of the way is ideal.
73 - Mike WA8BXN
___
FlexRadio Systems Mailing List
Not a good start to the marriage.
On Sat, 2011-10-01 at 19:19 -0400, William H. Fite wrote:
I just built an Elecraft KPA500 to drive with my Flex 5000. However,
I now have a serious problem.
I put the amp on the same shelf as the radio but every time I walk out of
the shack the 5000
, 4 Sep 2011 11:26:29 -0400
From: James Sheehan
To:FlexRadio@flex-radio.biz
Subject: [Flexradio] help
Message-ID:
caksjpsxccfeujuhdzh-z0h4oxfzu202wbmibyp7pbgwktkr...@mail.gmail.com
Content-Type: text/plain; charset=ISO-8859-1
Can anyone help me with this SDR 1000 with a delta 44 card
Subject: Re: [Flexradio] help
Jim,
The symtoms you describe are consistant with lack of communications
on SDR-1000 control cable..
This could be the radio not turned on. Or the control cable not
connected ( or missing wires in the parallel cable ) or not configured
correctly
Can anyone help me with this SDR 1000 with a delta 44 card. Everything load
into the computer just fine when power sdr comes up and I hit the start
button the radio go right into mox and it tell me there is a High swr .I
have a 1:1 swr and my other flex works just .I just got this 1000 the other
Is the SDR-1000 turned on?
Is the parallel cable connected and working properly?
73 - Mike WA8BXN
---Original Message---
From: James Sheehan
Date: 09/04/11 16:37:34
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] help
Can anyone help me
Your radio is probably OK.
Somewhere between PSDR V 1.18.6 and PSDR V 2.0.16 somebody broke the
code, I think. Read up on the bug I reported back in January (
http://support.flexradio.com/ReviewBug.aspx?id=3403it=B ). AFAIK, it
has not been fixed yet.
If you use V 1.18.6, you will probably
Hi ALL
I am looking for thoughts and / or guidance to resolving the subject
problem.
Setup:
Flex 3000
Firewire connected to a Win7 workstation (64 bit)
Station unattended at time for remote ops using Teamviewer.
com0com VAC in use.
CAT control for HRD and Skype is also interfaced.
Normally
: [Flexradio] Help Request - Tune Failed: No RF Detected.
Hi ALL
I am looking for thoughts and / or guidance to resolving the subject problem.
Setup:
Flex 3000
Firewire connected to a Win7 workstation (64 bit) Station unattended at time
for remote ops using Teamviewer.
com0com VAC in use.
CAT
I get the message Whoops looks like somethings wrong. when I try to start
PowerSDR with Fdigi, I know I configured it right because when I set it up
Saturday it worked, does anyone what causes the Whoops message?-
Burt
___
FlexRadio
, 2011 11:00 AM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Help my Whoops problem
I get the message Whoops looks like somethings wrong. when I try to start
PowerSDR with Fdigi, I know I configured it right because when I set it up
Saturday it worked, does anyone what causes the Whoops
Have a brand new 1500. I downloaded the software from the site...the
latest... proceeded to set up the 1500 went thru step 1 then step 2.
everything went as shown on the quick start guide. Went to step 3 ,powered on
the 1500 as directed , waited ,nothing further happens. Thought maybe
I have been trying to program my shuttle having problems can't fine
what the commands are help
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
we are BEGGING on 1.819...20 wpm...pse call
73, w5xz ( @ N8OO ) full size 4 square, long beverages..
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Had a virus and malware problem yesterday on my Flex PC. Spyware Doctor took
care of the PC is up and running fast and great! USB port printer and mouse
running just fine. But I noticed my SDR 2.08 would not come up it would
lock up on start up. So I uninstalled everything and done a reinstall.
, November 27, 2010 3:35 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] HELP FLEX 1500 REINSTALL PROBLEMS?? HELP HELP!
Importance: High
Had a virus and malware problem yesterday on my Flex PC. Spyware Doctor took
care of the PC is up and running fast and great! USB port printer and mouse
AM
To: Rick Tharrington; flexradio@flex-radio.biz
Subject: RE: [Flexradio] HELP FLEX 1500 REINSTALL PROBLEMS?? HELP HELP!
Rick,
Install PowerSDR v2.0.16. It will re-install the drivers along with giving
you a more improved version of PowerSDR than 2.0.8
-Tim
-Original Message-
From
-radio.biz] On Behalf Of Rick Tharrington
Sent: Saturday, November 27, 2010 3:35 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] HELP FLEX 1500 REINSTALL PROBLEMS?? HELP HELP!
Importance: High
Had a virus and malware problem yesterday on my Flex PC. Spyware Doctor
took
care of the PC is up
Sent: Wednesday, November 17, 2010 4:17 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Help Noise Blanker
When I turn on the Noise Blanker while listening to a QSO I can hear another
station up to 15kc away. It's more of a pumping sound vs. actual conversation.
The NB default is 20 and I
for the
blanker.
Bob
Sent via DROID on Verizon Wireless
-Original message-
From: Tim Ellison telli...@itsco.com
To: Leo Hoffmann leohoffm...@cox.net, flexradio@flex-radio.biz
flexradio@flex-radio.biz
Sent: Thu, Nov 18, 2010 13:57:02 GMT+00:00
Subject: Re: [Flexradio] Help Noise Blanker
When I turn on the Noise Blanker while listening to a QSO I can hear
another station up to 15kc away. It's more of a pumping sound vs. actual
conversation. The NB default is 20 and I have tried going up and down to no
avail. Also tried different settings of AGC.
I can have the NR on or off
I have the same issue (5000A), but I also experienced the same thing with
2.08. I've noticed that the magnitude of the problem coincides with the
magnitude of the noise.
Dan - W4TQ
On Wed, Nov 17, 2010 at 4:16 PM, Leo Hoffmann leohoffm...@cox.net wrote:
When I turn on the Noise Blanker
On Wed, Oct 27, 2010 at 10:02 AM, scottw...@verizon.net wrote:
Hi Mike and All,
Sadly I have received no responses for my request for help on getting my
friends 5000C up and running before his heart surgery.
I have not done it but many have. You need a program like VNC to remote the
display
Please help...N2NY will be undergoing heart surgery very soon, and I need
some direct advice to help get his Flex5000C up and running for remote
control so that he can use his station during convalesence. His station, on
a big hill, is 1/2 mile from his home (which is in the valley) and he will
I'm re-posting this because the server compacted my component diagram:
Please help...N2NY will be undergoing heart surgery very soon, and I need
some direct advice to help get his Flex5000C up and running for remote
control so that he can use his station during convalesence. His station, on
a big
In my humble opinion, the PowerSDR application badly needs a help button. It
has now reached the size and complexity that make it very hard to remember the
location of features in the menu structure and steps in the operation processes.
Regards,
Richard Ke7xu
On my PowerSDR whenever I put a pointer over a button it tells me what it does.
Burt
--- On Sun, 10/10/10, Richard M. Emerson rme_8...@hotmail.com wrote:
From: Richard M. Emerson rme_8...@hotmail.com
Subject: [Flexradio] Help Button
To: Flex Reflector FlexRadio@flex-radio.biz
Date: Sunday
Hi:
This mornig I decided to install PSDR 2.0 Beta, performed all steps as per
instructions and got the same error message on both installation attemps. The
message I am getting is the following:
Erro Communicating with radio, the program will likely crash
Please update the radio firmware to
: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mario Aviles
Sent: Sunday, July 18, 2010 4:32 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Help with PSDR 2.0
Hi:
This mornig I decided to install PSDR 2.0 Beta, performed all steps as per
instructions
The new firmware is in a folder in your Documents folder/library. Go looking
for it and you could upload it with the FlexDriver.
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
(540) 645 5394 NEW PHONE NUMBER
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
Neil and Tim:
Solved the problem, thanks for help. PSDR2.0 is great
73´s
Mario
- Original Message -
From: Tim Ellison telli...@itsco.com
To: Mario Aviles mario.avi...@amnetsal.com; flexradio@flex-radio.biz
Sent: Sunday, July 18, 2010 2:39 PM
Subject: RE: [Flexradio] Help with PSDR
...@airmail.net To: flexradio@flex-radio.biz Subject: [Flexradio]
Help with N1MM Message-ID:
2010070456.ae2c6...@dm0202.mta.everyone.net Content-Type:
text/plain; charset=us-ascii; format=flowed
I've been using N1MM log program for the past few years , today
setting up new hard drive I have downloaded
I've been using N1MM log program for the past few years , today
setting up new hard drive I have downloaded the latest version of
N1MM . The problem I'm having , I had before and don't remember what
I did to correct it.
N1MM wants to take focus , When I highlight PSDR and chick the mouse
Hello all,
Had to re-install PSDR 1.18.6 after an unsatisfactory bouts with v2.0
beta. Now I can't get the firmware 1.2.5.6 to flash the eeprom
I get the following message:
Firmware Update Status:
bus #0 not found on FlexRadio
WARNING: Program Execution Failure! ERROR CODE =1
Error
Lou,
I don't think that you have your FireWire working correctly. Be sure
that the FW driver is communicating with the radio through the FW HW.
If you are running XP, make sure that you have HotFix 955408 installed
and working..Power Down the radio before and after trying to flash
I've used N1MM Log for the past year or so, Cat , Telnet and Winkey
all have worked fine from the Start.. Here's the problem I'm having,
If I use Split on my F5K all the micros in N1MM change to the wav as
if in SSB . I'm in split at this time and N1MM logger is showing
(50112.00 (50110.00) CW
Try using the K3 as the interface instead of TS2000 and run N1MM through DDUTIL
into the F5K
When we were setting up SO2R we had some trouble with the TS2000 interface. We
also had trouble with the K3 interface but But K5FR was able to filter things
in DDUTIL in such a way as to make it
Lee Thanks, I changed to K3 and I have been using N1MM through
DDutil.. This didn't solve my problem, What did fix it was under
configure and Mode control . I set to ( use contest or radio mode )
All is good
Ed N5DG
At 05:17 PM 5/26/2010, Lee A Crocker wrote:
Try using the K3 as the
What gives? I shut down PowerSDR a little while ago and turned off the
5k. Now I turned it back on, booted PowerSDR, hit start and I have no
audio or any sort of waveform in the panadapter. I tried uninstalling a
reinstalling PowerSDR, a computer reboot and turning the radio on and
off but no
Does the driver see your radio? Also, make sure its not in demo mode (it
happens when you don't have your radio connected and you accidently press
Yes in the dialog box. After that, it doesn't even look for the radio, it
stays in demo mode!
73
Neal Campbell
Abroham Neal Software
Never mind, I got it back. I don't know what the problem was. I just
deleted and reloaded the flex driver and the Power SDR a second time as
well and now everything seems normal.
Michael
On 4/18/2010 9:38 PM, Michael Tondee wrote:
What gives? I shut down PowerSDR a little while ago and turned
Michael
Closing PowerSDR and power cycling the radio usually cures this.
Windows likes to forget about the flex driver at times while PowerSDR is
not running. I usually shut the radio off count to ten and restart the
radio and wait to hear the windows notification sounds then start
PowerSDR.
I have been running the PB_PAL alpha software and decided to revert to the
newly released 1.18.5 on my Win 7 64 bit system. Prior to running PB_PAL I
ran 1.18.3 with no problem.
I am currently using FW driver 7171 and have firmware 1.2.5.6 loaded in the
Flex-3000.
After installing
1 - 100 of 264 matches
Mail list logo
