Flex Radios could be made, through software changes in PSDR to operate from
commands issued by the operator's tap dancing and belching (See Breakfast of
Champions for actual wording) but although novel, it wouldn't be optimal.
Sci-Fi movies and slick TV commercials make great use of clever HMI
Patrick,
As your views of what PSDR is appreciated, it is not the opinion of all
operators of Flex radios. As my opinion of the use of touch screens might
gain some attention, the final deciding factor will be the decision of the
engineering team.
I think that this is a mute point. The only
PSDR is crashing frequently (but not always) when I use the FlexControl
to adjust the rx volume.
Looks like others have had this problem but I don't see any resolution
in the archives.
Re-installing did not fix the problem.
Any suggestions?
Thanks and 73
Wayne
K4ELO
Looking for a 2 position switch for coax input, controllable via software on
the PC (which I will be connected into via remote session).
I am not looking for a switch at the antenna (like the excellent Array
Solutions RatPak), but rather an antenna switch in the shack.with either USB
My new VU5K is only putting out 10w on 2m.
Has full output on 70cm.
Any suggestions?
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
How are you measuring the power output? What's your SWR on 2m?
Dan
On Sun, Jun 10, 2012 at 12:47 PM, Paul paul.hamra...@verizon.net wrote:
My new VU5K is only putting out 10w on 2m.
Has full output on 70cm.
Any suggestions?
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
Robert, Sorry if you were offended, it sure was not intended. Apparently my
humor was not well taken and you mistook the meaning of my Some of us take our
radio seriously... which would be you and others who apparently take radio
very seriously. In my opinion maybe not as seriously as operators
Hi Dan,
I have separate swr meters connected inline with each antenna.
The swr is low 1.2:1 on 2m and 1.1:1 on 70cm
Gulf Alpha EZSat antenna
I'm thinking there may be something I'm overlooking
Drive set to 100 on both bands during TX
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
What are you using for signal generation? The TUN button? FM? SSB?
Dan
On Sun, Jun 10, 2012 at 1:42 PM, Paul paul.hamra...@verizon.net wrote:
**
Hi Dan,
** **
I have separate swr meters connected inline with each antenna.
The swr is low 1.2:1 on 2m and 1.1:1 on 70cm
FM
Paul Delaney - K6HR
http://k6hr.dyndns.org:8080
_
From: Dan Parsons [mailto:dpars...@nyip.net]
Sent: Sunday, June 10, 2012 1:46 PM
To: Paul
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] New VU5K only 10w out on 2m
What are you using for signal generation? The
Mark,
I use this board
Velleman® K8055 USB Experiment Interface Board KitModel: K8055 | Catalog #:
277-035
From Radio shack to control relays in my shack for remote operation. THere
are a couple sample programs that exercise all the board does that were
sufficient for my needs so I
Patrick,
I am from the school of what things can be and not what is and has been. I
believe in the outlook of how can things be done more effectively. Watching
current trends and improving on certain concepts. I guess it has a lot to do
with an entire career in the Silicon Valley.
People
Hi everyone, I just got my ticket a few months ago and I'm looking at buying a
radio next month. I'm thinking that a 1500 will be a good start for me.
Ultimately, I'd like to be able to take the rig with me on the international
humanitarian missions I do (for backup communications) so size is
To make the 1500 do what you want, you will need to buy an amp and a
tuner. The cost of those two additional items equals or exceeds the
cost of a 3000, and the 3000 has a better receiver.
I've seen a lot of new hams start out with a marginal setup, then get
discouraged because it is hard to
14 matches
Mail list logo