for details.
-Original Message-
From: Bob McGwier [mailto:rwmcgw...@gmail.com]
Sent: Tuesday, June 02, 2009 6:36 PM
To: Woodrick, Ed
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] vhf/uhf digital modes and repeater operation
I believe that we should follow the route that Ed
Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bill Tracey
Sent: Monday, June 01, 2009 11:27 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] vhf/uhf digital modes and repeater operation
One could certainly do
Actually, it is a goal, and part of the success, of
the open source SDR groups, that things are not done
the way of the rest of the planet.
There is plenty of room for those who, for example,
wish recoup their investment in a proprietary CoDec
and want to require everything to pass through it.
Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bill Tracey
Sent: Monday, June 01, 2009 11:27 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] vhf/uhf digital modes and repeater operation
One could certainly do
I think we hold our nose and realize we are going to be
interoperable with P25 services of first responders
Unfortunately, D-Star is not compatible or interoperable with P25.
The AMBE codec that is used for D-Star (almost always the AMBE-2020)
will not decode P25 IMBE encoded transmissions.
At 15:35 6/2/2009, Bob McGwier wrote:
et for the greater good, I believe in this case, we should compromise.
I have been writing code for 50 years now, so I am a bit long in the
tooth. But I believe that D-Star (if it is to be successful) needs
an open source version. I am not saying
I'd like to know if the forthcoming vhf/uhf add-on for the 5000 will support
repeater operation and if so, how will pl tones be implemented.
Also, are there thoughts about using the new add-on with the digital modes
such as D-star, APRS, etc.
Thanks very much
Jim
KD7GND
.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim Madden
Sent: Monday, June 01, 2009 9:49 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] vhf/uhf digital modes and repeater operation
I'd like to know
and RX.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Jim Madden
Sent: Monday, June 01, 2009 9:49 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] vhf/uhf digital modes and repeater operation
I'd like to know
AWG Packet engine
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ted
Sent: Monday, June 01, 2009 12:56 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] vhf/uhf digital modes and repeater operation
What
-radio.biz
Subject: Re: [Flexradio] vhf/uhf digital modes and repeater operation
Yes, it will have tone support in an upcoming version of the software.
D-Start is proprietary.
You should be able to interface a TNC to the radio. I suspect that you can do
it virtually too, but the AWG software
Madden; flexradio@flex-radio.biz
Subject: Re: [Flexradio] vhf/uhf digital modes and repeater operation
Yes, it will have tone support in an upcoming version of the software.
D-Start is proprietary.
You should be able to interface a TNC to the radio. I suspect that you can do
it virtually too
, June 01, 2009 8:09 PM
To: Woodrick, Ed; Jim Madden; flexradio@flex-radio.biz
Subject: RE: [Flexradio] vhf/uhf digital modes and repeater operation
OK, so proprietary was the wrong description. The original specification is in
the public domain, developed by JARL as you noted. It specifies the AMBE
One could certainly do it, but is it not the start of the path to
madness? Imagine if you needed a dongle for PSK31, one for RTTY,
one for WSJT etc.
Personally I'd rather to see the SDR community advance the Free (as
in freedom) state of the art than support solutions that are
implemented
14 matches
Mail list logo