You might try going to setup-audio-factory defaults. I have had strange things
happen on my 5000 and resetting to factory defaults cleared up the mess.
Jim, K6QE
From: flexradio-requ...@flex-radio.biz
Subject: FlexRadio Digest, Vol 83, Issue 24
To: flexradio@flex-radio.biz
Date: Sat, 24
For all those interested I just hooked up the following with very successful
results using the Flex 5000A Windows 8 Professional Dell XPS 8500 Syba low
profile PCI-express Firewire card with TI chpset (purchased through Amazon) Jim
Gilliam, K6QE
From: flexradio-requ...@flex-radio.biz
Rf might be entering through the power and video cables. It could be that due
to your RF issues that many monitors might suffer this interference problem. I
would look into winding the cables around some torroids to see if this can
prevent the RF from entering the monitor circuitry. Also, you
It is quite easy to remote the power on and off on the Flex 3000. The front
panel power switch toggles on and off. One merely depesses the switch to the
on position and the radio can be turned on and off by remotely applying 12
VDC to the radio. There are several manufacturers that produce
PowerSDR has provides to methods of recording. One is to use the REC PLAY
buttons on the radio graphics. It will record and playback the frequency you
are recording. There is a Wave tab where one can record audio or IQ. IQ allows
one to play back the spectrum monitored. It works very well.
I have successfully used TRENDnet USB to Serial Converter. They are available
at Amazon.com at a very reasonable price. I have 5 of them in use and never had
a problem. It comes with a CD driver.
Jim, K6QE
From: flexradio-requ...@flex-radio.biz
Subject: FlexRadio Digest, Vol 106, Issue
I will repeat this as I have about 5 times now. All of you who have your SDR's
working great make a drive image of your computer. It takes on an average
(depending on the size of the hard drive) 30 minutes to make a drive image and
a little more time to restore the image. This problem has
Hard drive imaging is almost a necessity when running SDR radios. It is so easy
to make an image and takes around 15 minutes to restore the hard drive to the
point where the image was made. Many argue that in restoring an image at an
earlier date, one will lose many of the installed programs
Skype is not a good program for remoting. A much better free program is RemAud.
Try it and you will never go back. Virtually no detectable latency.
http://www.df3cb.com/remaud/download.php
Jim, K6QE
> From: flexradio-requ...@flex-radio.biz
> Subject: FlexRadio Digest, Vol 131, Issue 15
9 matches
Mail list logo