On a server I have a package installed using ports and now I have to install
the package with exactly the same make arguments on another server. I just
don't find a way to see what arguments where used to install it the first
time. With Linux I would look into config.status is there something
Hi Paul,
I am booting from a 512MB CF card, and run /var and /tmp from a RAM drive.
Upon startup, the CF card /var and /tmp dir. are copied into the ram drives,
the rest is Read Only. When it shuts down (not very often), the ram drive
contents are copied back to the CF card. You could backup
Like Mr Wojciech Puchar, I have a VT100 clone here at home... that I
use for kernel
debug on a 9600 com1 port... and it works soo good..
May be when you are 55 (or 64 as the beatles song)... you will use
konsole and the boys will use
some kind of brain cortex wired interface
and some
default, window frames and titles removed,
all screen available for ACTUAL USE.
All easily attainable in E17. :)
put a config for E17 for those interested.
my .fvwm2rc, but it uses /etc/wm-menus/Fvwm-pl with program menu. you may
write it yourself or use my menugen program.
set with
of SPF (Sender Policy Framewokr) would immediately identify it as a spoof,
and will be blocked.
To learn more about this system, see
http://www.openspf.org/
if the same machine is for sending and receiving mail simply putting
IN TXT v=spf1 mx -all
is OK and enough
web
browser works best with your recommendation?
evilwm on xorg with xfmail and opera and an .xinitrc of:
evilwm
exec xsetroot -cursor_name ul_angle
exec xset m 19/5 12 b 90 880 12
exec swisswatch -geometry -0+0
the best watch using least space on screen is the one hanging on the wall
:)
Hello.
I'm running FreeBSD 6.2/i386 with X.org 6.9.0 on a box with an MGA G450
card.
As soon as I launch any app that tries to go fullscreen (e.g. dosbox),
this box will reboot without displaying any message or leaving a crash dump.
Any hint on how to start diagnosing this?
bye Thanks
I am trying for several days now to get 3d acceleration working on
FreebSD for my XFX 7800 GS. But nothing what I've tried worked :-( .
Below is a collection of useful information I've gathered thus far. Who
can help me?
*
# sysctl hw.nvidia.agp.status*
hw.nvidia.agp.status.status: disabled
[EMAIL PROTECTED] wrote:
I am trying for several days now to get 3d acceleration working on
FreebSD for my XFX 7800 GS. But nothing what I've tried worked :-( .
Below is a collection of useful information I've gathered thus far. Who
can help me?
*# glxinfo | fgrep direct*
Xlib: connection
As soon as I launch any app that tries to go fullscreen (e.g. dosbox), this
box will reboot without displaying any message or leaving a crash dump.
Any hint on how to start diagnosing this?
make debug kernel (makeoptions DEBUG=-g) and see in the crash
reboots from kernel panics. Replacing the NIC
solved it.
It's possible, but I've tried 3 different 3c905C's between the two
(top-most) slots I'm using for them, and they all have the same symptom,
set up speed and half/full duplex manually and it should fix a problem. at
least did for me
On Sunday 11 March 2007 18:52, Patrick Bowen wrote:
If one wanted to learn Assembly Language Programming, would he be better
served starting with as(1) or nasm(1)?
as(1) is the assembler used in the building procedure,
making it your logical choice for operating system
programming. It uses the
On 12/03/07, Wojciech Puchar [EMAIL PROTECTED] wrote:
web
browser works best with your recommendation?
evilwm on xorg with xfmail and opera and an .xinitrc of:
evilwm
exec xsetroot -cursor_name ul_angle
exec xset m 19/5 12 b 90 880 12
exec swisswatch -geometry -0+0
the best watch
Hi
I have a little problem with kdm. When I try to sign on the screen
reverts back to the login dialog after a few seconds. I can use xdm
without any problems.
The problem started when I switched my soundcard from an external
soundblaster to the onboard Intel. I'm using the Intel HDA driver
for machines doing mostly fileserving and routing even 2 CPUs may
be not well utilized
That is only true if the process is giant locked. When look at dmesg,
look for things that say GIANT-LOCKED and those will be ones confined
to one processor. There has been a massive push since 5 to get ride
Sort of. Great parts of FreeBSD, in fact the vast majority of
the source code, is written in C. But it is not *completely*
written in C.
groff is in C++ AFAIK, lots of shell or perl code to support compiling,
some assembly, adaptec microcode assembler etc.
On Friday 09 March 2007 23:52, Modulok wrote:
How do I work-around a situation where cp, hangs forever?
You can try several things:
1) mount read-only and try to copy the data.
dd(1) might be a better choice than cp(1),
read more bellow.
2) unmount and dump(8) the filesystem.
3) use
They're minimalistic and slick to use. If you should need to connect with a
windows box there's Xming. Look in the archives!
what is Xming?
with grep -i xming /usr/ports/INDEX
nothing found
___
freebsd-questions@freebsd.org mailing list
I have used XFCE 3.* on all my free BSD boxes for years. It is a Simple GUI
which I use on any Desktops I build. The video is clear and is simple. (
XFCE4* I did not like the concept.) Emails etc all work and install easily
from ports.
one of the best choices for those who want desktop. but
On Mon, 12 Mar 2007 11:10:11 +0100 (CET)
Wojciech Puchar [EMAIL PROTECTED] wrote:
I have used XFCE 3.* on all my free BSD boxes for years. It is a
Simple GUI which I use on any Desktops I build. The video is clear
and is simple. ( XFCE4* I did not like the concept.) Emails etc
all work
-Original Message-
From: Aniruddha [mailto:[EMAIL PROTECTED]
Sent: 09 March 2007 22:36
To: Vince
Cc: Harrison Peter CSA BIRKENHEAD; freebsd-questions@freebsd.org
Subject: Re: Help needed syncing Palm Treo 650 with FreeBSD
Vince wrote:
Aniruddha wrote:
Vince wrote:
for
On 12/03/07, Leslie Jensen [EMAIL PROTECTED] wrote:
Hi
I have a little problem with kdm. When I try to sign on the screen
reverts back to the login dialog after a few seconds. I can use xdm
without any problems.
The problem started when I switched my soundcard from an external
soundblaster to
Running glxinfo as user works:
$ glxinfo | fgrep direct
direct rendering: Yes
3d acceleration still isn't working though :-( :
$ sysctl hw.nvidia.agp.status
hw.nvidia.agp.status.status: disabled
hw.nvidia.agp.status.driver: n/a (unused)
hw.nvidia.agp.status.rate: n/a (disabled)
Hello Alexander,
There's /var/db/ports/name of port for the result of make configure,
if that is what you mean? Otherwise most ports should have their .conf
and other settings in /usr/local/etc.
Good luck!
Alexander Schlichting skrev:
On a server I have a package installed using ports
It is for someone who wants to work in that environment.
exactly, but it would be handy to define what desktop is.
could someone provide me a definition?
is X server alone a desktop? i think no.
is KDE a desktop? i think yes from what i heard.
is XFCE a desktop? i think too.
so is my X
I am seeing some inconsistent and strange results after the DST
change this weekend. On all the boxes, it seems setup OK
# zdump -v /etc/localtime | grep 2007
/etc/localtime Sun Mar 11 06:59:59 2007 UTC = Sun Mar 11 01:59:59
2007 EST isdst=0 gmtoff=-18000
/etc/localtime Sun Mar 11 07:00:00
Hi,
Just updated /usr/src to -stable (-rRELENG_6), and are now compiling
the -stable kernel.
Just wondering if I will need to rebuild the base system (world?) as
well so they are in sync?
Thanks.
--
Please avoid sending me Word or PowerPoint attachments.
See
Hello Wojciech,
...If you should need to connect with a Windows box...(to a FreeBSD
machine running X).
A part of Xming is a remote desktop client for Windows. You will find
more information at - http://sourceforge.net/projects/xming.
Good luck!
Wojciech Puchar skrev:
They're
Sunnz wrote:
Hi,
Just updated /usr/src to -stable (-rRELENG_6), and are now compiling
the -stable kernel.
Just wondering if I will need to rebuild the base system (world?) as
well so they are in sync?
Probably nothing bad will happen if you don't, but if you start getting
weird errors
On Mon, 12 Mar 2007 13:28:15 +0100 (CET)
Wojciech Puchar [EMAIL PROTECTED] wrote:
It is for someone who wants to work in that environment.
exactly, but it would be handy to define what desktop is.
could someone provide me a definition?
is X server alone a desktop? i think no.
is KDE
On 03/12/2007 03:01, Wojciech Puchar wrote:
default, window frames and titles removed,
all screen available for ACTUAL USE.
All easily attainable in E17. :)
put a config for E17 for those interested.
Unfortunately the config files are now in a binary format. So to post
them would be
On 12/03/07, Eric Schuele [EMAIL PROTECTED] wrote:
On 03/12/2007 03:01, Wojciech Puchar wrote:
default, window frames and titles removed,
[...]
However, it is certainly possible to have all windows borderless and
full screen, each on their own desktop. You can navigate desktops with
keybd
Just updated /usr/src to -stable (-rRELENG_6), and are now compiling
the -stable kernel.
Just wondering if I will need to rebuild the base system (world?) as
well so they are in sync?
tell me what base system do you have now.
___
6.2-Release. I only have updated the kernel so far.
Probably will upgrade the base system soon, but at the same time I
wanted to know if it should be something need to be done as quickly as
possible.
Thanks
2007/3/13, Wojciech Puchar [EMAIL PROTECTED]:
Just updated /usr/src to -stable
In response to Wojciech Puchar [EMAIL PROTECTED]:
Just updated /usr/src to -stable (-rRELENG_6), and are now compiling
the -stable kernel.
Just wondering if I will need to rebuild the base system (world?) as
well so they are in sync?
99% of the time, the answer is yes.
The real
the one i was looking for very long!
as i don't have windoze anywhere close now could you tell me if:
1) this X server can use font server or Xorg format fontsets (.pcf.gz or
.pcf)
2) does it work with xdm on server (just for sure, as naturally it should)
3) what keybinding will be blocked
On Sun, Mar 11, 2007 at 10:03:38AM +0530, Susanth K wrote:
Dear Friends,
Am a beginner to *BSD OS.
Am interested in setting up intel / AMD based Free and Open Source Server (
No GUI required )
Prime area is Webserver With PHP/MySQL Support and Ruby On Rails. +
PostgreSQL
Which os
Check out this URL for starters:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x11.html
A desktop environment can mean anything ranging from a simple window
manager to a complete suite of desktop applications, such as KDE or GNOME.
can mean is very far from definition.
You should give it a try. Its very fast and very lightweight.
faster than fvwm2. so i will :)
my .fvwm2rc, but it uses /etc/wm-menus/Fvwm-pl with program menu. you may
write it yourself or use my menugen program.
set with assumption that it's 1024x768 screen
WindowFont
Hm, sounds like installing ion3 would be an easier task.
ion3 is the WM of my choice, and it does exactly (or nearly) what you
describe, and some more. You can additionally set up different layouts
i am always open for making my workplace more productive and easier to
use. so i will have a try
6.2-Release. I only have updated the kernel so far.
my question was what version of base system you have in /bin, /sbin, /lib
etc. now so i could answer if you HAVE to compile 6.2, should or don't
need to, just put the kernel
if your system binaries is 6.0 or later you don't need to
-- Forwarded message --
From: Jeff Rollin [EMAIL PROTECTED]
Date: 12-Mar-2007 12:56
Subject: Re: polling my FreeBSD compariots...
To: Eric Schuele [EMAIL PROTECTED]
On 12/03/07, Eric Schuele [EMAIL PROTECTED] wrote:
On 03/12/2007 03:01, Wojciech Puchar wrote:
default, window
On Sun, Mar 11, 2007 at 02:07:04PM +0530, Susanth K wrote:
Wikipedia says,
http://en.wikipedia.org/wiki/Freebsd
FreeBSD 7.0 is on Improved scheduler and locking scalability for 32+ CPU
systems (prototyping)
Does Any One know How Many CPU Does FreeBSD 6.2 Supports ?
People on the
As I said some emails ago
I have a 200 machines all freebsd network that runs 24/7 with a mtbf
of 15 years...
how I got the numbers?
well I have an issue every 3 or 4 weeks... (the machine hangs,
stops, the power supply explodes) the machines are aways on...
if you count 200
Wojciech Puchar wrote:
6.2-Release. I only have updated the kernel so far.
my question was what version of base system you have in /bin, /sbin,
/lib etc.
Check the Subject line :)
Cheers,
Karol
--
Karol Kwiatkowski karol.kwiat at gmail dot com
OpenPGP 0x06E09309
signature.asc
On Mon, 12 Mar 2007 14:17:38 +0100 (CET)
Wojciech Puchar [EMAIL PROTECTED] wrote:
Check out this URL for starters:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x11.html
A desktop environment can mean anything ranging from a simple
window manager to a complete suite of
As I said some emails ago
I have a 200 machines all freebsd network that runs 24/7 with a mtbf
of 15 years...
how I got the numbers?
well I have an issue every 3 or 4 weeks... (the machine hangs,
stops, the power supply explodes) the machines are aways on...
if you count 200
Hello Wojciech,
May I suggest that you redirect these questions to the Xming forum? The
link to the forum is at - http://sourceforge.net/projects/xming.
Wojciech Puchar skrev:
the one i was looking for very long!
as i don't have windoze anywhere close now could you tell me if:
1) this X
On Mon, 12 Mar 2007, Mike Tancsa wrote:
I am seeing some inconsistent and strange results after the DST change this
weekend. On all the boxes, it seems setup OK
...
yet different behaviour. Any idea whats up ?
This is the same thing I asked about yesterday (Daylight Savings Time --
On Sun, Mar 11, 2007 at 08:12:54PM -, Andy Kendall wrote:
As a newb to FreeBSD I find that the manual/handbook is not great in detail,
(understatement), and I seem to be relying on this questions list for a lot
of help.
In my opinion it relies on far too high a plateau of knowledge by
On 12/03/07, Wojciech Puchar [EMAIL PROTECTED] wrote:
Hm, sounds like installing ion3 would be an easier task.
ion3 is the WM of my choice, and it does exactly (or nearly) what you
describe, and some more. You can additionally set up different layouts
i am always open for making my workplace
Your mail to 'LogAnalysis' with the subject
Fwd: image.jpg
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you will receive
notification of the
hw.nvidia.agp.status.status: disabled means that the nvidia AGP
driver isn't working, not that 3d acceleration isn't working.
If you want to use the nvidia agp driver, then you should compile a
kernel without device agp.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
Hi,
I have a small problem. On my central server we run an openldap server that
contains the userdata for some systems. An the server uses this ldap
server for authentication and nss. The problem is that when the server is
booting slapd takes a very long time to start up. I think it's trying
Martin Tournoij wrote:
hw.nvidia.agp.status.status: disabled means that the nvidia AGP
driver isn't working, not that 3d acceleration isn't working.
If you want to use the nvidia agp driver, then you should compile a
kernel without device agp.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
This document says that after the make installkernel, you reboot in
single user mode, and then run mergemaster -p.
This gives me errors about a read-only filesystem. Can't create
/var/tmp/temproot.
Do the instructions
I would be out of the country on a business trip till March 23rd with a very
limited access to my voice messages and emails. If you need any immediate
attention, please feel free to call my colleague KP @ 609 799 3762 x27.
Alternatively, you may also contact me through [EMAIL PROTECTED]. I
Lol.
Yes, all I have done is installing FBSD6.2-Release from a CD, then
rebuilt the kernel using 6-stable sources.
2007/3/13, Karol Kwiatkowski [EMAIL PROTECTED]:
Wojciech Puchar wrote:
6.2-Release. I only have updated the kernel so far.
my question was what version of base system you have
Hi.
By what device name should I mount
the flash memory disk (disk-on-key).
On linux it was /dev/sdb0, what is it's name on FreeBSD ?
Thanks,
Dima.
___
freebsd-questions@freebsd.org mailing list
sorry for accidentally posting this publicly not just privately and
polluting list
Hello Wojciech,
May I suggest that you redirect these questions to the Xming forum? The link
to the forum is at - http://sourceforge.net/projects/xming.
.
.
.
On 3/12/07, Dima Sorkin [EMAIL PROTECTED] wrote:
Hi.
By what device name should I mount
the flash memory disk (disk-on-key).
On linux it was /dev/sdb0, what is it's name on FreeBSD ?
Thanks,
Dima.
___
freebsd-questions@freebsd.org mailing list
In response to Michael P. Soulier [EMAIL PROTECTED]:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
This document says that after the make installkernel, you reboot in
single user mode, and then run mergemaster -p.
This gives me errors about a read-only
[EMAIL PROTECTED] wrote:
Martin Tournoij wrote:
hw.nvidia.agp.status.status: disabled means that the nvidia AGP
driver isn't working, not that 3d acceleration isn't working.
If you want to use the nvidia agp driver, then you should compile a
kernel without device agp.
Hi Mike,
It appears that certain daemons don't read tzdata except at startup.
I'm not using bind or sendmail in production but I did notice this on a
few development servers... Probably related to the way time zone info
is read by libc. Because really, how often does it change? :)
- Chris
Hi.
I see there
...
umass0: SanDisk Corporation Cruzer Mini, rev 2.00/1.25, addr 3
...
which means that I should
mount -o rw -t vfat /dev/umass0 MNT_POINT
as root
?
Thanks and regards,
Dima.
On 3/12/07, Jeremy Gransden [EMAIL PROTECTED] wrote:
On 3/12/07, Dima Sorkin [EMAIL PROTECTED]
On Mon, 12 Mar 2007 16:58:22 +0200
Dima Sorkin [EMAIL PROTECTED] wrote:
Hi.
By what device name should I mount
the flash memory disk (disk-on-key).
On linux it was /dev/sdb0, what is it's name on FreeBSD ?
Thanks,
Dima.
Try this (just a hint):
% mount_msdosfs /dev/da0s1 /path/where
...
umass0: SanDisk Corporation Cruzer Mini, rev 2.00/1.25, addr 3
...
which means that I should
mount -o rw -t vfat /dev/umass0 MNT_POINT
as root
?
see farther so da0 (or 1,2,3) will show in logs
if it doesn't you may have not compiled da and scbus
then /dev/da0 will be the device and
--- [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
On 11/03/07, Paulette McGee
[EMAIL PROTECTED] wrote:
--- Wojciech Puchar [EMAIL PROTECTED]
wrote:
As a newb to FreeBSD I find that the
manual/handbook is not great in detail,
(understatement), and I seem to be relying on
this
Hi.
Yes ! I see da0. Thanks for everybody meanwhile.
(I should relogin as root, put myself in 'wheel' group, then
I will check whether it works)
Dima.
On 3/12/07, Wojciech Puchar [EMAIL PROTECTED] wrote:
...
umass0: SanDisk Corporation Cruzer Mini, rev 2.00/1.25, addr 3
...
which means
Just installed Release 6.2 on my workstation, and the first thing I
did was installing (pd)ksh since I have been using it before...
I found that a few things doesn't work, tab-completion, up/down arrow
keys, ctrl-A ctrl-E to go to the beginning/end of a line.
Does anyone uses ksh here who knows
John L wrote:
I phrased it wrong. You are not responsible for the content, but you
are responsible for the mail domain and that includes verifying that
mail is validly from your domain you are responsible for.
Oh, OK. So if someone sends pump and dump with a [EMAIL PROTECTED] return
I noticed a project called NanoBSD in the freebsd handbook that is
intended for exactly this purpose. I compiled installed it just
fine on 6.1 release, but my hardware wouldn't boot a CF card, so I was
unable to verify that it worked.
Sounds like NanoBSD is to FreeBSD what m0n0wall is to
My bad. Says right on the m0n0wall homepage that it is based on
FreeBSD, not Linuxyea for us!
Steve
On 3/9/07, Nejc Škoberne [EMAIL PROTECTED] wrote:
Hello,
I plan to install a FreeBSD 6.2 router/gateway/DHCP server on a EPIA
box with 1GB Transcend IDE Flash drive. Since Transcend says
On Tue, Mar 13, 2007, Sunnz wrote:
Just installed Release 6.2 on my workstation, and the first thing I
did was installing (pd)ksh since I have been using it before...
I found that a few things doesn't work, tab-completion, up/down arrow
keys, ctrl-A ctrl-E to go to the beginning/end of a line.
Anyone else have this particular error? I can't seem to get php5-pcre
to build.
/usr/ports/devel/php5-pcre/work/php-5.2.1/ext/pcre/php_pcre.c -fPIC
-DPIC -o .libs/php_pcre.o
/usr/ports/devel/php5-pcre/work/php-5.2.1/ext/pcre/php_pcre.c:102:
warning: parameter has incomplete type
Anyone else have this particular error? I can't seem to get php5-pcre
to build.
/usr/ports/devel/php5-pcre/work/php-5.2.1/ext/pcre/php_pcre.c -fPIC
-DPIC -o .libs/php_pcre.o
/usr/ports/devel/php5-pcre/work/php-5.2.1/ext/pcre/php_pcre.c:102:
warning: parameter has incomplete type
I seem to have broken gcc on my 6.2-RELEASE p2 system. I apparently
did this by adding
CPUTYPE?=c3
to /etc/make.conf and then a make buildworld and make install world.
Everything seems to be working fine (though I haven't tested
throughly), but now gcc is definitely broken. Most compile
On Sun, 11 Mar 2007 17:27:52 -0800
jekillen [EMAIL PROTECTED] wrote:
If you will allow me to break in on this exchange;
Does this advise apply if you have static ip service
The important thing is really your reverse DNS, if you have control of
it and looks like a real server name, e.g.
On Sat, 2007-03-10 at 22:52 +0100, Wojciech Puchar wrote:
can it be set to make possible to login root to machine through telnet and
without telneting to some user and then su -
?
with sshd and rshd it can be set, with telnetd - no success.
My reasons for this being a bad idea isn't so
On Mar 8, 2007, at 2:03 PM, Dan Nelson wrote:
[ ... ]
It would be nifty to make ndc/rndc smart enough to understand how to
find the pidfile under the chroot location.
rndc doesn't need to know where the pid is; it connects directly to
named over the control port (953) to do its magic. Try
Christopher Hobbs writes:
Anyone else have this particular error? I can't seem to get
php5-pcre to build.
Built and installed just fine for me five minutes ago on
FreeBSD 7.0-CURRENT #1: Mon Jan 22 16:56:10 EST 2007 i386
Robert Huff
I built a home server to prepare to build a new production server. Well, the
latter is built out, but when I went back to the former, it said there was a
problem with my last shutdown (which I don't remember) and went into single
user mode. I went to run a find and it complained it couldn't
Robert Huff wrote:
Christopher Hobbs writes:
Anyone else have this particular error? I can't seem to get
php5-pcre to build.
Built and installed just fine for me five minutes ago on
FreeBSD 7.0-CURRENT #1: Mon Jan 22 16:56:10 EST 2007 i386
I am trying to find a way to stop some people on our network from
accessing certain websites. We have been using Squid with SquidGuard
on an older FreeBSD system.
The Squid that was installed from ports doesn't seem to see https:
connections. From what I can find, this appears to be
On 3/12/07, Mike Tancsa [EMAIL PROTECTED] wrote:
I am seeing some inconsistent and strange results after the DST
change this weekend. On all the boxes, it seems setup OK
[...]
yet mixed in notice the /kernel entry... Its an hour off !?
if I restart syslogd, it corrects it for the kernel
Hi Abdullah!
On Mon, 12 Mar 2007, Abdullah Ibn Hamad Al-Marri wrote:
On 2/27/07, Abdullah Ibn Hamad Al-Marri [EMAIL PROTECTED] wrote:
On 2/26/07, Joe Auty [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Have you recompiled all PHP extensions too?
I believe
Hi.
Thanks for resolving the case.
diskonkey works fine.
Dima.
On 3/12/07, Wojciech Pucha wrote:
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
On Mon, Mar 12, 2007 at 08:18:25AM +0100, Alexander Schlichting wrote:
On a server I have a package installed using ports and now I have to install
the package with exactly the same make arguments on another server. I just
don't find a way to see what arguments where used to install it the
At 02:00 PM 3/12/2007, Bob Johnson wrote:
On 3/12/07, Mike Tancsa [EMAIL PROTECTED] wrote:
I am seeing some inconsistent and strange results after the DST
change this weekend. On all the boxes, it seems setup OK
[...]
yet mixed in notice the /kernel entry... Its an hour off !?
if I restart
Hi.
I experimented with the values:
1) On my machine 'maxusers' doesn't influence the maximum memory
allowable for allocation for single process.
2) 'maxdsiz' - Yes, as long as I keep 'maxdsiz + maxssiz' below physical
memory size - everything is fine. Single process allocates
I'm trying to add a second IP address to an existing jail
using natd and I must be missing something.
Setup:
HOST_IP The host, attached to fxp0
JAIL_IP The existing, working jail
2ND_IP The IP address I'm trying to natd to the jail
I've got ipfw rules to catch traffic
Hi.
1) How do I start KDE / FVWM2/ GNOME / TWM / Windowmaker ?
( I've choosed them during installation )
2) Is there some nice welcome program,
that allows to choose a session kind ?
Dima.
On FreeBSD 6.2 i386,
startx-- starts TWM
root gdm -- starts gnome desktop manager,
On Mar 12, 2007, at 11:20 AM, Dima Sorkin wrote:
2) 'maxdsiz' - Yes, as long as I keep 'maxdsiz + maxssiz' below
physical
memory size - everything is fine. Single process allocates
successfully
up to 'maxdsiz'.
When tried to put 'maxdsiz' phys mem size,
indeed
In response to Drew Jenkins [EMAIL PROTECTED]:
I built a home server to prepare to build a new production server. Well,
the latter is built out, but when I went back to the former, it said there
was a problem with my last shutdown (which I don't remember) and went into
single user mode. I
Hi.
Something is probably wrong.
kern.dfldsiz on my machine does not influence.
I.e. after booting I run
$ limits
and it shows me the old 500M.
Now, a point about 'maxdsiz'= 3.0-3.5G instead of 4G - this one I must check.
I tried 3.9G :)
Thanks,
Dima.
On 3/12/07, Chuck Swiger wrote:
It is
1) How do I start KDE / FVWM2/ GNOME / TWM / Windowmaker ?
( I've choosed them during installation )
$ startkde
or put something like this in your ~/.xinitrc:
exec gnome-session
or
exec wmaker
etc.
and start x
$ startx
2) Is there some nice welcome
I didn't read to the end...
root gdm -- starts gnome desktop manager,
which allows to start only GNOME
(I was used that it allows to launch any WM,
but in this case - only GNOME).
How do I add new GDM sessions?
http://www.freebsd.org/gnome/docs/faq2.html#q16
HTH,
bye.
On Mar 12, 2007, at 12:02 PM, Dima Sorkin wrote:
Something is probably wrong.
kern.dfldsiz on my machine does not influence.
I don't believe you can change that value after the system has
booted-- you have to set it either in the kernel's config file, or
in /boot/loader.conf, for this to
Yes, /usr is mounted. When I say rebuild, I mean I stuck the FBSD 6.2 CD erased
the old installation and reinstalled.
Drew3
Bill Moran [EMAIL PROTECTED] wrote: In response to Drew Jenkins :
I built a home server to prepare to build a new production server. Well,
the latter is built out, but
Tore Lund wrote:
I believe it's enough to put this line into /boot/device.hints:
hint.agp.0.disabled=1
Is this really true? Who can confirm this? I also wonder why glxgears in
FreeBSD gives me 5000 fps, while in Linux gives me 13000. To get 5000
fps in Linux I need to disable 3d
1 - 100 of 153 matches
Mail list logo