On Tue, 27 Aug 2002, Joeffrey Betita wrote:
hi ppl i was installing freeradius-0.7 on my RH6.2 this error message came
up after typing make
Add: --with-rlm-x99-token=no to your ./configure command line.
If you do that you won't have support for x99_token's but that's probaly not
a big
Hai,
I don't know much about RADIUS.
now i am working in one bank.
we are plannig to connect some branches using
RAS(Remote Access Server).
Using this connectivity we want to exchange financial
information.
is this preferable solution to financial
institutes.
How much secure is this.
Hi all,
I've a problem with reply attributes with postgresql module. I have 3
records in database but radius fetches only first one. I think the
problem in sql_fetch_row function:
static int sql_fetch_row(SQLSOCK * sqlsocket, SQL_CONFIG *config) {
int records, i, len;
Hi,
I made a bad mistake!!! I shut down my Comp at weekend and on monday freeradius didn't
work anymore!
FreeRadius starts without errors but when i send an access-request it crashes with an
segmentation fault always in the rlm_ldap:
rlm_ldap: bind to xx.xx.xx.xx:636
Segmentation Fault
Dear Mr. Murthy,
For your problem RADIUS is the most feasible
solution and most secure one. Moreover it has got a lot of authentication
systems which you can use and you can integrate with LDAP, MySQL, MS-SQL server
etc. I am working in an ISP and all our authentication, authorization and
For connecting branches better use point-to-point link
such as leased line or frame relay (if applicable even X.25). RADIUS is suitable
for single dial-in user. For better economy you may use demand dialing
(point-to-point). You may use some encryption box before
routerfor secure
On Mon, 26 Aug 2002 17:51:28 +0400
Dinar wrote:
Hi, I'm using FR0.7 with postgresql database
and I'm selecting reply attributes from database, but in reply I get
only one attribute.
My list looks like:
id | Username | Attribute | value| op
Just got back from a 2 week sabatical, hoping to pick up where I left off.
John [EMAIL PROTECTED] wrote:
After running flawlessly for a couple of weeks, suddenly and inexplicably,
the
radius server started spawning process and reached the maximum default of
32
(continued running), complained
Hi,
in radiusd.conf there is the parameter checkrad with the location of this
program that isn't read at startup time by the server. I need it because I
have many servers that run on the same machine (on different port) and each
one use a different checkrad (in the checkrad there are the
more infos
rlm_ldap with debug level 3
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to 192.168.10.230:636, authentication 0
rlm_ldap: setting TLS mode to 1
rlm_ldap: bind as CN=admin,OU=CW,OU=KIP,O=DE/admin to 192.168.10.230:636
ldap_bind
ldap_simple_bind
ldap_sasl_bind
Hello,
Thanks alot I finally got it to work!!! Well when compiling I have tried
'make clean' and 'make distclean' with no success. Finally I tried
openldap-2.0.25 like you suggested and everything works fine now. Well I
guess all the hair pulling could have been avoided by going to a
Dear [EMAIL PROTECTED],
There is a lot of questions about misconfigured FreeRADIUS servers
because of misunderstanding of FreeRADIUS operations. I'll try to
explain a bit.
Normally there are 2 steps in processing authentication request coming
from NAS in FreeRADIUS (plus
On Tue, 27 Aug 2002, Stefan Winterling wrote:
more infos
rlm_ldap with debug level 3
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to 192.168.10.230:636, authentication 0
rlm_ldap: setting TLS mode to 1
rlm_ldap: bind as CN=admin,OU=CW,OU=KIP,O=DE/admin to
i'm a jerk!! it works!!!
too late for my brain...
go home
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Tue, 27 Aug 2002, John wrote:
Just got back from a 2 week sabatical, hoping to pick up where I left off.
John [EMAIL PROTECTED] wrote:
After running flawlessly for a couple of weeks, suddenly and inexplicably,
the
radius server started spawning process and reached the maximum default
Monah Baki [EMAIL PROTECTED] wrote:
I went back to ./configure, I still had the same problem. Where do I
need to look in /usr/local/lib???
You need to tell the linkeron your system to look in /usr/local/lib
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Dear 3APA3A,
I read your last article with great pleasure, but I still have some
questions.
1. How can I mark pair to be a configure atribute but not a check
atribute - I tried to set
different values in op field in the database, but had no result.
2. Which item must be set into check list
Not to
take the discussion to far away from FreeRadius...
If I
were your bank customer, and you were transmitting my financial information over
point-to-point ISDN or asynchronous dialup connections using IP as your network
layer protocol; encryption would be just as important to me as
How would someone setup FreeRADIUS to allow a user to have dual modems and
authenticate correctly?
Setup a different realm?
Any examples out there?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Aaron T. Weiker [EMAIL PROTECTED] wrote:
Would it be possible to get this put in with the documentation?
See 'doc/aaa.txt' from the current CVS.
I took the liberty of adding articles (the, an), which Russion
doesn't generally use in the same places as in English.
Alan DeKok.
-
List
Does anyone have this issue? It seemed that only happened with username
Cxx, not even with cx.
Does anyone have a fix for this?
__
Introducing NetZero Long Distance
Unlimited Long Distance only $29.95/ month!
Sign Up Today!
Chen, Qinxue [EMAIL PROTECTED] wrote:
Does anyone have this issue? It seemed that only happened with username
Cxx, not even with cx.
Does anyone have a fix for this?
Edit the 'hints' file.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Thank you, it works like a charm now! Sorry for the wasted effort yesterday
with the patches to sql.c, etc.
Chris Kalin
- Original Message -
From: Kostas Kalevras [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, August 26, 2002 8:00 PM
Subject: Re: rlm_sql.c and sql.c fixes for
If I recall correctly...
Add this into the reply attribute/value pair list to be passed to that
individual user:
Port-Limit = x
where x is the number of ports you want that user to be able to use.
Dual-Channel ISDN and two-modem multilink users would want 2 ports.
--
Mark P. Hennessy
Once again I think I'm pushing the envelope.
I'm trying to put an SQL query into my huntgroup file using the
following syntax:
tollfreeCalling-Station-ID == `%{sql: SELECT '%i' FROM
AllowedTollFree WHERE NPANXX = LEFT('%i', 6)`
Running the server in debug mode it looks like it tries to
You can get it ftp it from 5399-8000.com in outgoing
the file is X9.0.3.tar.Z
User id is [EMAIL PROTECTED]
password is [EMAIL PROTECTED]
Thanks
Doug
- Original Message -
From: Alberto Pereira [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Cc: Rodrigo Pipoli [EMAIL
Alberto,
Unfortunately, Nortel doesn't keep the patch releases on their server.
R18.0-2 was the last R image released by Nortel. Since that time, there have
been 3 patch releases. I found the release notes I wrote for the X images
and the bug in question was fixed in X18.0.2. It is as follows:
hi all,
i'm currently migrating from cistron radius to freeradius + ldap backend.
on cistron radius, we're using huntgroups and run an external program to
return the Session-Timeout for a particular system group.
was it still the same for freeradius? does it check for the huntgroup name
via
28 matches
Mail list logo
