Hello,
i use freeradius 0.7.1 as Proxy-RADIUS.
When i start the deamon, it made a nslookup for every entry
in clients.conf file. If the look up fails the daemon don't
start. How can i stop this behaviour? Because when the daemon
crash (may never be) and i want a automatic restart maybe it
failed
On Tue, Oct 22, 2002 at 04:16:27PM -0500, Roger wrote:
Thanks for the suggestion Alan. Besides upgrading to newest version,
did you(or anyone else) notice that I was infact calling radrelay correctly?
Depending on your setup, yes. Though it might be easier to just use the
-n flag. But do what
hi all
Do anybody know whether Windows XP and CSICO AP350 not follow
draft-congdon-radius-8021x-20.txt ?
When I sniffer the packet of CISCO AP350 in dynamic-Wep Key,I see my Windows XP
received two EAPOL-Key packet.
One is for BroadcastKey (WEP Index is 1)== With Key field
One is
Hello,
I just installed freeradius CVS 0.8-pre
I try to connect from a NAS which have always dynamic IP addresses.
So I use the nice feature to use the NAS-Ident described here:
###
#
# Definition of a NAS or a client.
#
#
Hi,
I have compiled freeradius-0.7.1 on cygwin version 1.3.13 and it is running
fine.
The only problem that I have is that sending the daemon a SIGHUP (kill -1 PID)
is not forcing the daemon to reread its configuration files.
In general sendig a signal to the daemon works (like kill -15).
Hi:
I'm in the process of implementing Cisco's LEAP protocol. I have to pick-up a Radius server which can support the same.
Does Freeradius support Cisco's LEAP implementation? If yes, do we have any available "HOWTO - Configuration"/Documentation. If no, what's the best alternative Radius to
thanks
Jeremy Choi
eMail: [EMAIL PROTECTED]
Tel: 852 - 3123 1283
Fax: 852 - 2218 2212
56/F The Center
99 Queen's road central
Hongkong
-
List info/subscribe/unsubscribe? See
At 10:55 24.10.2002, you wrote:
Hi,
I have compiled freeradius-0.7.1 on cygwin version 1.3.13 and it is running
fine.
The only problem that I have is that sending the daemon a SIGHUP (kill -1
PID)
is not forcing the daemon to reread its configuration files.
In general sendig a signal to the
Hi,
[EMAIL PROTECTED]
Gesendet von: [EMAIL PROTECTED]
24.10.2002 12:20
Bitte antworten an freeradius-users
An: [EMAIL PROTECTED]
Kopie:
Thema: Re: SIGHUP not working
At 10:55 24.10.2002, you
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi folks,
I've just switched over to Freeradius 0.7 from an awful kludgy collection
of hacked radius servers and I'm very impressed.
I've configured the server to read authentication + attributes from an LDAP
server, and it does the accounting to
On Thu, 10 Oct 2002, Sergey Holod wrote:
On Monday 07 October 2002 21:42, Aleksandar Zhelyazkov wrote:
There are also some diferences between the sql db schema supplied in
src/modules/rlm_sql/drivers/rlm_sql_postgres/db_postgres.sql
and the sql statemetns for accounting_onoff etc in
Hi,
I'm running FreeRadius v0.7 installed from /usr/ports on FreeBSD
4.7-RELEASE.
When issueing a kill -1 `cat /var/run/radiusd.pid` the daemon dies with the
following log entry:
Thu Oct 24 15:37:25 2002 : Error: MASTER: exit on signal (11)
When starting the daemon with '-s -xx' and issueing a
eManager Notification *
The following mail was blocked since it contains sensitive content.
Source mailbox: [EMAIL PROTECTED]
Destination mailbox(es): [EMAIL PROTECTED]
Rule/Policy: Profanity
Action: Quarantine to C:\Program
| By Chris Parker [EMAIL PROTECTED]
| [ 2002-10-24 21:48 +0200 ]
It does appear related to threads, based on the system calls in the
stack. You could try running it in single-process mode ( radiusd -s )
to see if that avoids hitting a thread related
At 09:44 PM 10/24/2002 +0200, Aragon Gouveia wrote:
| By Chris Parker [EMAIL PROTECTED]
| [ 2002-10-24 21:13 +0200 ]
Looks like a system problem to me. Sorry. :( Are you up on the latest
system patches? I don't run FBSD so I can't give you much more
| By Chris Parker [EMAIL PROTECTED]
| [ 2002-10-24 21:13 +0200 ]
Looks like a system problem to me. Sorry. :( Are you up on the latest
system patches? I don't run FBSD so I can't give you much more help here.
Damn. That's what it looked like to me
At 08:41 PM 10/24/2002 +0200, Aragon Gouveia wrote:
| By Chris Brotsos [EMAIL PROTECTED]
| [ 2002-10-24 17:49 +0200 ]
You will actually want to run the server via gdb.
gdb /path/to/radiusd/radiusd
gdb set args -x -x
gdb run
Neat. Here's the output:
NetNITCO Systems Administration wrote:
I don't know much about the Ascend product, however, our 3Com Total Control
Units have an authentication_algorithm setting which you can set to
round_robin for that purpose.
Could it be that you have recently upgraded software on your Ascend chassis
Thomas Bridge [EMAIL PROTECTED] wrote:
I've just configured the system to work with GRIC, but at the moment I have
the problem that all my customers can now roam using GRIC. Does anyone
have any thoughts on the easiest way to restrict the customers who can roam
with GRIC?
Read the FAQ.
[EMAIL PROTECTED] wrote:
I read the notes on this on the frontios site, and there was a mention of
the need to add field op type varchar(2) to the radcheck and
radgroupcheck tables, for version 0.5 and newer, but I'm only running
0.4.
Does anyone have any ideas or do I need to supply more
Nikhil Chauhan [EMAIL PROTECTED] wrote:
Does Freeradius support Cisco's LEAP implementation?
No.
If yes, do we have any available HOWTO - Configuration/Documentation.
Any such docs would be distributed with the server.
If no, what's the best alternative Radius to use in this case.
On Thursday 24 October 2002 11:30 am, Roger wrote:
Would anyone have a clue as to why the Ascend box is doing a round
robin aproach on which radius server its going to?
I don't know much about the Ascend product, however, our 3Com Total Control
Units have an authentication_algorithm setting
This might be an Ascend question more then a FreeRadius one, but I'll
give it a spin.
I've setting up a new radius server to authenticate our dialup users.
This new radius server has a identical setup as the old. user and
detail files are synced up using rsync right now, I'm having trouble w/
At 05:37 PM 10/24/2002 +0200, you wrote:
| By Chris Brotsos [EMAIL PROTECTED]
| [ 2002-10-24 17:17 +0200 ]
I would suggest running in GDB to find out what's going wrong here.
Yea, I tried but honestly can't find the core file. Core dumps are enabled
in
On 24 Oct 2002, at 14:12, Chris Parker wrote:
To: [EMAIL PROTECTED]
From: Chris Parker [EMAIL PROTECTED]
Subject:Re: sighup kills radiusd
Send reply to: [EMAIL PROTECTED]
On Thu, 24 Oct 2002 [EMAIL PROTECTED] wrote:
I have done some searching about configuring FreeRadius to authenticate
users via Active Directory. I would assume that LDAP would be the way to
handle this. I have not seen any configuration examples anywhere, so if
someone has some, I would
Hi folks,
I have still the same problem with my radius server. I have tried the
MEMTEST86 to test my memory, and with all the tests (Extended test) my
RAMs passed all of the tests. Bellow is the output for my radius server in
debug mode:
[rootLOG root]# /radius/sbin/radiusd -xx
Starting - reading
Title: Solaris Compile Error
Hi,
I am sure this has been posted before as I saw part of it in the list archive but what I didn't see is the answer.
when I run ./configure everything seems to go through okay. There are the warnings that pop up due to things I am not compiling but it
| By Chris Brotsos [EMAIL PROTECTED]
| [ 2002-10-24 17:49 +0200 ]
You will actually want to run the server via gdb.
gdb /path/to/radiusd/radiusd
gdb set args -x -x
gdb run
Neat. Here's the output:
GNU gdb 4.18 (FreeBSD)
Copyright 1998 Free
| By Chris Brotsos [EMAIL PROTECTED]
| [ 2002-10-24 17:17 +0200 ]
I would suggest running in GDB to find out what's going wrong here.
Yea, I tried but honestly can't find the core file. Core dumps are enabled
in the config, I've recompiled with
At 04:37 PM 10/24/2002 +0200, you wrote:
Hi,
I'm running FreeRadius v0.7 installed from /usr/ports on FreeBSD
4.7-RELEASE.
When issueing a kill -1 `cat /var/run/radiusd.pid` the daemon dies with the
following log entry:
Thu Oct 24 15:37:25 2002 : Error: MASTER: exit on signal (11)
I would
Aragon Gouveia [EMAIL PROTECTED] wrote:
I gave it a try by setting args -s -x -x from gdb and issueing a sighup. It
crashed in the same way. :(
Starting program: /usr/local/sbin/radiusd -s -xx
[..]
Program received signal SIGHUP, Hangup.
0x281139bc in _thread_sys_poll () from
| By CTA [EMAIL PROTECTED]
| [ 2002-10-24 22:42 +0200 ]
Looks like you have a problem with GDB/KDE (3.0?) on FreeBSD-
4.5 ?, etc, or memory leak in one of your libs. Get the latest FBSD
and KDE source and re-build.
Am running 4.7-RELEASE (no KDE). You
Recently I decided to move the users from ldap to a db, where accounting
is already being stored. After populating the tables, apropiately
modifying radiusd.conf and rechecking it was all correct I found this
error which has showed up in the list before:
rlm_sql: Pairs do not match [test1]
hi
alan, if i remember correctly you wanted to integrate the necessary pre-
and postproxy treatment into the 0.8 release... i don't want to bother
you but given that the modules have the necessary (null-)pointers now,
when do you think 0.8 (in fact pre/post-proxying) can be out? a rough
Title: Filter search
I have got freeradius installed and working as a simple radius server with an LDAP backend. I would like to know if anyone can point me in the direction of the documentation that deals with realms and filtering usernames from the request.
i.e. [EMAIL PROTECTED] I would
Hi,
I have installed another Redhat 8.0 machine with FreeRadius 0.7.1
installed on. I have downloaded the memtest86 bootable image and tested my
RAM and it was OK. I did as bellow:
1) configure --enable-developer --prefix=/Radiusd
2) make
3) make install
4) made the following changes to the
Hi Hamid,
Actually changing the RAM worked in my case. But i do not think that this is
the solution. You have got exactly the same error that i have got. I am
still looking for a solution from the FR developers!!
Atanu Das
System Development
SS NetCom Pvt Ltd.
Dhankheti
Shillong-793003
Ph:
I have PAP and MSCHAP working fine using MySQL for users. When I try to
enable CHAP
I get the following error at startup:
ERROR: Cannot find a configuration entry for module chap.
I added chap to the Authorize section - which is what I think causes the
error.
I uncommented chap in the Authicate
had the same problem.
right below pap put the following
chap {
Auth-type = CHAP
}
That will fix it
-Original Message-
From: Tim McCracken [mailto:tim.mccracken;primeragroup.net]
Sent: Friday, October 25, 2002 12:16 AM
To: [EMAIL PROTECTED]
Subject: CHAP Error
I have PAP and MSCHAP
http://www.mtghouse.com
On Thursday 24 October 2002 05:13 am, Nikhil Chauhan wrote:
Hi:
I'm in the process of implementing Cisco's LEAP protocol. I have to pick-up
a Radius server which can support the same.
Does Freeradius support Cisco's LEAP implementation? If yes, do we have any
Summary:
My dialout isn't seizing or dialing out. MAX is set to VSA, not OLD. With
briDisplay I'm not seeing any attempt to dial. This leads me to conclude
that I'm not returning some special nugget that will encourage it to dial.
Detail:
The routes are loaded fine and if I go after the
42 matches
Mail list logo