Hi Ivan!
Thanks so much!
The problem has been resolved~
Just a bit of tweaking on samba... but overall, everything is fine...
Thanks a million!
Regards,
Andy
--
View this message in context:
http://www.nabble.com/Freeradius-2.0-with-Activedirectory-Integration-Failed-tp20355701p20575360.html
I am a little confused with this...
tnt-4 wrote:
ntlm_auth in mschap module works only for - mschap requests. It will not
work for pap requests.
Normally, ntlm_auth is set in the MSCHAP module. Authentication requests
from logging into the system, like SSH, uses PAP?
Is there anyway that I
testing, I noticed that it did not hit the ntlm_auth command.
What is it I did wrong?
Regards,
Andy
--
View this message in context:
http://www.nabble.com/Freeradius-2.0-with-Activedirectory-Integration-Failed-tp20355701p20536920.html
Sent from the FreeRadius - User mailing list archive
I followed the manual by removing the entry that was added in users file...
But after testing, I noticed that it did not hit the ntlm_auth command.
You removed it!
ntlm_auth in mschap module works only for - mschap requests. It will not
work for pap requests.
Ivan Kalik
Kalik Informatika ISP
-
://www.nabble.com/Freeradius-2.0-with-Activedirectory-Integration-Failed-tp20355701p20552483.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Thanks again! I amended it and it works.
But that is only for testing...
Yes. Now you go on with the manual.
Can I use the MSCHAP method? Or I have to create a module of my own for
users to authenticate?
No, you configure the ntlm_auth line in raddb/modules/mschap.
Ivan Kalik
Kalik
1. Added user Auth-Type := ntlm_auth to users file in
/usr/local/etc/raddb
But your user is called test.
2. Added ntlm_auth into authenticate of default and inner-tunnel of
sites-enabled directory
authenticate {
ntlm_auth
Auth-Type PAP {
pap
}
..
..
added users on the activedirectory...
Andy
--
View this message in context:
http://www.nabble.com/Freeradius-2.0-with-Activedirectory-Integration-Failed-tp20355701p20452959.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http
Currently, there are some questions that are going on in my head...
:confused:
1. Must the ntlm_auth be placed in modules or in radiusd.conf?
If the configuration exec ntlm_auth is to be placed in modules, which
modules?
Modules.
2. In the URL, that indicated that I must input ntlm_auth into
as I was doing now
Regards,
Andy
--
View this message in context:
http://www.nabble.com/Freeradius-2.0-with-Activedirectory-Integration-Failed-tp20355701p20433178.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http
the plunge to 2.x...
Thanks!
Regards,
Andy
--
View this message in context:
http://www.nabble.com/Freeradius-2.0-with-Activedirectory-Integration-Failed-tp20355701p20415385.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http
in the module directory, but it didn't
work.
The error is still reported to be the same.
Should I fall back to freeradius 1.x instead?
Regards,
Andy
--
View this message in context:
http://www.nabble.com/Freeradius-2.0-with-Activedirectory-Integration-Failed-tp20355701p20413490.html
Sent from
You have two errors to fix...
This;
/usr/local/etc/raddb/users[1]: Parse error (check) for entry
DEFAULT:
Unknown value ntlm_auth for attribute Auth-Type
And this:
Errors reading /usr/local/etc/raddb/users
/usr/local/etc/raddb/modules/files[7]: Instantiation failed for
module
files
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
--
View this message in context:
http://www.nabble.com/Freeradius-2.0-with-Activedirectory-Integration-Failed-tp20355701p20376253.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List
Firstly, Thanks for taking time to look at the problems I am facing.
I have followed your instructions, and set the following in the users file:
DEFAULT Auth-Type = ntlm_auth
After doing that, I ran radiusd -X
The configuration was fine at the beginning, but as it reaches an abrupt
stop with
I am implementing Freeradius 2.0 to be integrated with Microsoft
Activedirectory and has encountered problems.
All are being run in Virtual Environment (VMware Server 1.07)
RADIUS
OS: CentOS5.2
Freeradius Server 2.1.1
PAM radius 1.3.17
Active Directory
OS: Windows 2003 Server
I refer to a
?
If there is more information required, please tell me.
I have attached my radius configuration as well:
http://www.nabble.com/file/p20355701/radiusd.conf radiusd.conf
Thanks in advance!
Regards,
Andy
--
View this message in context:
http://www.nabble.com/Freeradius-2.0-with-Activedirectory-Integration
17 matches
Mail list logo