Well, you don't really have to modiffy it by hand, it is a simple patch
to the kernel
I tested it and it works perfectly.
yours,
kos
Eric Robertson wrote:
hmmm... I dont think I am up to modifying my kernel source by hand
just yet (if I read Ben's response correctly). Thanks for the
I have an ATI card that is using the generic radeon driver at the
moment. Yes, lcd brightness is working the so is the ambient
light snesor - I base that claim ont he fact that the lcd brightness
changes intensity when i turn off the lights.
Eric
JOAN MASSICH VALL wrote:
Do you have
Alden Huang wrote:
Eric Robertson wrote:
I had a problem when I upgraded kernels as well. When on the 2.6.15
kernel I2C was a module. I did not change this config when I first
compiled the 2.6.16 kernel. I re-compiled w/ I2C compiled intot he
kernel the lcd sensor started to work but I
Eric Robertson wrote:
The result, my syslog is filling up w/ hundreds of lines detailing the
i2c devices loaded the keyboard now lights up. When I boot back to
the old kernel (the one without the debug_core debug_bus enabled) it
stops working. lcd brightness works on both of them works on
Do you have working the lcd brightness??, what kind of grafic card do you
have?. I'm using a 12 pbook 867Mhz with a gentoo from two years ago and I
don't check hardware configuration since a long time ago. Is the nvidia
and lcd light runing??
tnks, ( sorry for my english)
I am running gentoo on
I have the same problem as you do, but in my case the ambient lights
sensor doesn't work either.
This happened after a switch from 2.6.15 to 2.6.16. I think the reasons
might be in the I2C module that has been changed.
In the 2.6.15 it was I2C_KEYWEST while in 2.6.16 it is named I2C_POWERMAC.
I am running gentoo on a 15 aluminum powerbook. I am using the
2.6.16.r5 kernel and pbbuttonsd 0.7.4. I have been going over the man
pages online documentation but cannot figure out how to get the
illuminated keyboard working. pbbuttonsd does not error during load.
The pbbuttonsd.conf
Hello
On Sat, May 27, 2006 at 11:24:05AM -0400, Eric Robertson wrote:
I am running gentoo on a 15 aluminum powerbook.
Which exact model? grep machine /proc/cpuinfo
Depending on that, you've the LMU behind the PMU or on I²C.
Thanks,
Michael
--
Gentoo Linux developer, http://hansmi.ch/,
