the following error stops compilation:
nanohttp.c: In function `xmlNanoHTTPConnectAttempt':
nanohttp.c:808: `len' undeclared (first use in this function)
nanohttp.c:808: (Each undeclared identifier is reported only once
nanohttp.c:808: for each function it appears in.)
make[2]: ***
I need to reinstall my system but want to keep the
downloaded files in the portage, so i don't have to
donwload them again.
And your question is...?
If you're wanting to know what you need to back up, I'd say: backup
/usr/portage/distfiles/
The package list is also quite big, but doing a
On Wed, Mar 26, 2003 at 02:08:17PM -0800, Chris Graves wrote:
during the installation, how can I check what hardware was autodetected?
thanks,
-c
--
[EMAIL PROTECTED] mailing list
dmesg will tell you all there is to know
/jens
--
[EMAIL PROTECTED] mailing list
Thank,
I pressed enter before the mail was done.
Patrick
On Thu, 27 Mar 2003 09:51:48 +0100
Gwendolyn van der Linden [EMAIL PROTECTED] wrote:
I need to reinstall my system but want to keep the
downloaded files in the portage, so i don't have to
donwload them again.
And your question
Hi,
I want a webcam that can do normal video recording you'd expect from a webcam
as well as taking still images without being connected to the PC like a
digicam would do.
So far I've looked into Creative Lab's PC-CAM series as well as Logitech
Click-Smart series. They have
On Thu, Mar 27, 2003 at 05:49:12PM +1100, Mark Saunders wrote:
I have an ASUS A7V8X motherboard with an onboard Promise PDC20376
controller.
So it is the same board I have.
Take a look at the kernel-traffic list: RAID is archived at:
Howdie all
I have recently got my sound card up with alsa no ive emerged alsa-xmms and
It plays fine but when its playing and I try stop it or jump straight to
another song it seems to get stuck and just sits there the same happens with
mplayer except mplayer does close after a few seconds any
Hi
You might want to save your binary packages too.
they're in $PORTDIR/packages (default to /usr/portage/packages )
it can save a LOT of time if you make a ... mistake
Azhdeen
Hi,
I need to reinstall my system but want to keep the downloaded files in
the portage, so i don't have to
On Wed, 2003-03-26 at 18:34, Jimmie Fulton wrote:
I wrote my pdf (and jpg printer) script in Python... to each his own.
:) Its at work behind a firewall; maybe I'll post it later if I
remember.
The script is a cups backend. (I did it this way so that Netatalk can
share the same cups
When starting and after registration of uin in SIM-0.8.1 I get a seg-fault which is
somehow related to libpthread (according to kde's crash-handler). Have anyone else had
this problem and if so anyone got a solution?
Thanks,
Patrick Börjesson
--
[EMAIL PROTECTED] mailing list
CAn you see the drives if you boot to the Adaptec BIOS and
did you set up the array there?
On Thu, 27 Mar 2003 07:57:05 +0100
Robert Arroyo i Andreu [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
El Jueves, 27 de Marzo de 2003 02:03, Brett I. Holcomb
escribió:
Which
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
El Jueves, 27 de Marzo de 2003 13:49, brett holcomb escribió:
CAn you see the drives if you boot to the Adaptec BIOS and
did you set up the array there?
Yes, i can see the drives in the Adaptec Bios, and i can set the array there
without problems.
Please confirm the font name you had put into ~/.gtkrc-2.0.
Courier is an example.
The command fc-list displays all fonts you can use.
Please put one of them into .gtkrc-2.0.
that file don't exist, so i touched it and put the lines into it.
the only files which i have:
.gtkrc
Hi all,
when trying to emerge gaim-cvs I get the message: All ebuilds
that could satisfy gaim-cvs have been masked. Where can I
edit this mask to install the latest version of gaim? Best regards,
- Christian
/usr/portage/profiles/packages.mask
but be carefull, there might be other
On Thursday 27 March 2003 15:43, Christian Aust wrote:
Hi all,
when trying to emerge gaim-cvs I get the message: All ebuilds that
could satisfy gaim-cvs have been masked. Where can I edit this mask
to install the latest version of gaim? Best regards,
- Christian
ACCEPT_KEYWORDS=~x86
At 12:39 AM 03/27/2003 -0700, you wrote:
Hi again,
Well, I just finished installing Gentoo on an older machine. I go to reboot
as the final step and discover that the drive had Quantum's Dynamic Drive
Overlay installed and that grub didn't overwrite it.
So, is there a way to remove the overlay
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Michael Jinks wrote:
[...]
| I think this is coincidental. My authoritive source on these matters
| is the Jargon File; main site appears to be unreachable right now (I
| get a redirect to EFF's home page, for some reason) but here from a
| mirror:
I used Quickswitch for a while. Worked for me, with a few minor issues.
Its in portage.
Mike
On Thursday 27 March 2003 10:08, Patrick Marquetecken wrote:
Hi,
What is the best way to switch between eth0 'internal networkcard for use
at work' and eth1 'pcmcia wireless orinoco at home', i'm
Mike,
Try the overlay software itself.
Some overlay software (I've only used seagate's) has an option to remove
the overlay.
-Lee
On Thu, Mar 27, 2003 at 12:39:26AM -0700, Mike Diehl wrote:
Hi again,
Well, I just finished installing Gentoo on an older machine. I go to reboot
as the final
Patrick Marquetecken wrote:
What is the best way to switch between eth0 'internal networkcard for use
at work' and eth1 'pcmcia wireless orinoco at home', i'm only using one
network connection eacht time.
Just reroute the connection when you switch interfaces (or write a script to
do it
Anupam Kapoor wrote:
Spundun Bhatt wrote : borken is broken.
What does bork mean on this mailing list? where does it come from?
whats its literal meaning?
There are many theories I have heard on that. One is that someone
misspelt broke as bork, but without the e at the end makes that a
stretch.
hi,
no problem :-) some minutes before, a user from gentoo-de told me, to
install the gtk-theme-switcher. After that, i started switch2 und
couldt choice a font and the size.
Now gaim-cvs looks great :-)
big thank for you're help
cu denny
On Thu, 2003-03-27 at 14:29, SADO Hiroyuki wrote:
Check out ACCEPT_KEYWORDS=~x86
On 27 Mar 2003 14:43:09 +0100
Christian Aust [EMAIL PROTECTED] wrote:
Hi all,
when trying to emerge gaim-cvs I get the message: All
ebuilds that could
satisfy gaim-cvs have been masked. Where can I edit
this mask to
install the latest version of gaim? Best
On Thu, 2003-05-01 at 12:37, Ryan Oberto wrote:
Howdie all
This is the error I get
Form mplayer
ALSA lib pcm_hw.c:481:(snd_pcm_hw_drain) SNDRV_PCM_IOCTL_DRAIN failed:
Input/output error
Alsa-uninit: pcm drain error: Input/output error
What version of alsa are you using?
--
[EMAIL
what is...
version bump
upstream release.
I encountered these words in the changelogs of the ebuild... lately I am
having a very hard time finding meamings of the words through google!!!
Spundun
--
[EMAIL PROTECTED] mailing list
version bump means the version number is increased.
Upstream means someone above Gentoo issued a release.
Think of it this way - you have Gentoo who puts the
packages together in ebuilds, etc. but they use someone
else's package. For example, xfce is released by the xfce
people - Gentoo
I've installed artwiz fonts, freefonts, jmk fonts. I was wondering what
should be in my XftConfig file:
/usr/X11R6/lib/X11/XftConfig
I manually added the directories at the top and a few others that seemed
to not be in the file(Util, 75dpi, 100dpi, and Speedo). But X is still
not finding
On Thu, 27 Mar 2003 10:11:50 -0800
Susie [EMAIL PROTECTED] wrote:
I've installed artwiz fonts, freefonts, jmk fonts. I was wondering what
should be in my XftConfig file:
/usr/X11R6/lib/X11/XftConfig
I manually added the directories at the top and a few others that seemed
to not be in
Some usefull commands (taken from O'Reilly's book The X
Window System Administrator's guide.
xset -q will show what X is using for the font path. See
if the directories are there.
The directories need to be added to the font path.
xset +fp directory will prepend the new directory to the
font
Hi,
Has anybody done this?
What I want to do is to be able to print documents by just hitting the
print button on acroread,evolution,phoenix/mozilla and other document
viewers. I use gnome (dont think that should matter though)
I have samba installed.
The printers are on network and are
For the last weeks I can emerge everything but avifile. Always stops at
the same point, these below are the last lines.
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.2.2/../../../../i686-pc-linux-gnu/bin/ld:
cannot find -lartsc
collect2: ld returned 1 exit status
make[2]: *** [libaviplay.la] Error 1
Try thease pages for help:
http://www.exploits.org/v4l/ - variety of info (drivers, software,
howto, etc)
http://alpha.dyndns.org/ov511/cameras.html - lists supported cameras
ov511 and their status
http://www.smcc.demon.nl/webcam/which.html
http://webcam.sourceforge.net/#cams
mmh, you could reboot with a gentoo/knopix/any bootable linux distro and
then chroot/chdir to you're mounted harddrive, then you should be able
to create /proc...
i'm not 100% sure though, but it's well worth a try and sounds pretty
much doable.
HTH,
bri
On Thu, 2003-03-27 at 20:14, Chris
Chris Graves wrote:
This is my first install of gentoo. After install, on first boot,
startup halts claiming mount point /proc does not exist. I checked
and sure enough /proc does not exist. But the filesystem is readonly
at this point in the startup, so what can I do?
Any ideas
Chris Wood wrote:
Hi,
Whenever I try to do an emerge sync or rsync I get the following error
message.
receiving file list...
39509 files to consider
app-admin/
app-admin/addpatches/
ERROR: out of memory in receive_sums
rsync: read error: connection reset by peer
rsync: error: error in rsync
On Thu, 27 Mar 2003 08:17:42 -0600
MrPaulAR [EMAIL PROTECTED] wrote:
At 12:39 AM 03/27/2003 -0700, you wrote:
Hi again,
Well, I just finished installing Gentoo on an older machine. I go to
reboot as the final step and discover that the drive had Quantum's
Dynamic Drive Overlay installed
I heard Francesco Talamona said:
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.2.2/../../../../i686-pc-linux-
gnu/bin/ld: cannot find -lartsc
Known issue. It's an aRts installation bug. Here's an easy workaround:
ln -s /usr/kde/3.1/lib/libartsc.so /usr/lib/libartsc.so
(As root.)
It should fix the
Thanks Rene, i'll give that a try.
On Thu, 2003-03-27 at 19:35, Rene Broichmann wrote:
Am Don, 2003-03-27 um 01.02 schrieb Mark Saunders:
I'm trying to install gentoo on a system with an onboard promise raid
controller and two ide
harddrives running as a mirrored array.
Booting the
Brett I. Holcomb wrote:
Which driver are you using? I have an Adaptec 3210S and I use the dpt_i2o
driver. There is another dpt driver but that doesn't work with this board
per Adaptec.
On Wed, 2003-03-26 at 16:46, Francois Meehan wrote:
Hi Robert,
Did you have any luck?
I am having the
I'm trying to install ALSA but when I run:
env ALSA_CARDS='cmipci' emerge alsa-driver
the following error rises.
/usr/src/linux/include/linux/list.h:181: internal error: Segmentation
fault
Please submit a full bug report,
with preprocessed source if appropriate.
See
I have a server running Getnoo 1.4rc2, with phpGroupware, and I want to get
the spell check working. I inquired on their list about what is needed for it
to work and they indicated that I needed to compile pspell into php and it
would automatically see it and use it. I looked in the Gentoo
Segmentation faults are usually hardware - memory , motherboard, cpu.
Try doing it again.
If that doesn't work then logout, come back in and do only the compile.
If that doesn't work either then reboot, login and do the compile.
If you're using KDE or something like that go to a non GUI level
You're welcome. Have fun with it!
Brett I. Holcomb wrote:
Which driver are you using? I have an Adaptec 3210S and I use the
dpt_i2o driver. There is another dpt driver but that doesn't work with
this board per Adaptec.
On Wed, 2003-03-26 at 16:46, Francois Meehan wrote:
Hi Robert,
On Thu, 2003-03-27 at 22:57, [EMAIL PROTECTED] wrote:
I have a server running Getnoo 1.4rc2, with phpGroupware, and I want to get
the spell check working. I inquired on their list about what is needed for it
to work and they indicated that I needed to compile pspell into php and it
would
On Thursday 27 March 2003 2:08 pm, Collins Richey wrote:
On Thu, 27 Mar 2003 08:17:42 -0600
MrPaulAR [EMAIL PROTECTED] wrote:
At 12:39 AM 03/27/2003 -0700, you wrote:
So, is there a way to remove the overlay without destroying my Gentoo
install?
I'm fairly sure there isn't because that
Is there a way to get a list of all packages with unsatasfied dependencies?
I unmerged X, kde, and gnome... I have a huge package dependency mess now,
and emerge --update world wants to remerge a bunch of X packages.
Wcc
--
[EMAIL PROTECTED] mailing list
Hello,
I dont know what to do in this situation. Im trying to get squirrelmail
running but it needs mod_php. When I try to emerge, I keep getting
these errors:
checking whether the C++ compiler (g++ -mcpu=athlon-xp -O3 -pipe
-Wl,-rpath,/opt/blackdown-jdk-1.3.1/jre/lib/i386/classic
Hey guys,
I got my Linksys WMP11 PCI card working with my 802.11b Linksys router (WEP enabled)
but when I try to download a large file, the card loses connection to the router. The
modules are still loaded but doing a iwconfig shows almost no information for the
card. The only way I've found
Try pulling out your RAM, scrub the leads with an eraser and reseed them. It
worked for me!
--
*-_-_-_-_-_-_-_-_-_-_-_-_-_-*
AIM: StabbyMcforehead
ICQ: 73080754
Yahoo: davidsmind
Jabber: davidsmind
Email: davidsmind at linuxbasics dot com
Weblog: http://davidsmind.diaryland.com
--
[EMAIL
Hi!
Am Freitag, 28. März 2003 01:52 schrieb Chris:
I dont know what to do in this situation. Im trying to get
squirrelmail running but it needs mod_php. When I try to emerge,
I keep getting these errors:
-L/opt/blackdown-jdk-1.3.1/jre/lib/i386 -Wl,-rpath,/usr/qt/3/lib
-L/usr/qt/3/lib)
On Thursday 27 March 2003 05:12 pm, Steely, Kevin (CCI-Atlanta) wrote:
Hey guys,
Has anyone else experienced this before? It's a very annoying problem
especially when trying to emerge mozilla :P For the record, my connection
is perfect for x amount of time... but about 5mb into any
On Thursday 27 March 2003 5:31 pm, Sami Näätänen wrote:
On Friday 28 March 2003 01:38, Mike Diehl wrote:
Would you believe that this didn't fix it? I booted a '98 floppy and
did an fdisk /mbr. But when I rebooted to the hard drive, the
overlay was still there! Damned virus.
Have you
If you don't already have gentools installed emerge it. Then qkpg
-Idqv gnome then repeat subing kde and xfree for gnome. Another way
is to run the dep-clean script: dep-clean -Nv
From the man pages:
dep-clean - Shows unrequired packages and missing dependencies.
-N, --needed
On Thu, 27 Mar 2003 18:37:03 -0700
Mike Diehl [EMAIL PROTECTED] wrote:
On Thursday 27 March 2003 5:31 pm, Sami Näätänen wrote:
On Friday 28 March 2003 01:38, Mike Diehl wrote:
Would you believe that this didn't fix it? I booted a '98 floppy
and did an fdisk /mbr. But when I rebooted
!!! ERROR: dev-php/mod_php-4.3.1 failed.
!!! ERROR: dev-php/mod_php-4.3.1 failed.
!!! Function src_compile, Line 216, Exitcode 1
!!! Function src_compile, Line 216, Exitcode 1
!!! bad ./configure
!!! bad ./configure
Can someone tell me how to fix this?
Yup! I know how to fix that
Which is the best supported IDE RAID chipset?
I'm after a motherboard with onboard IDE RAID support.
I gave up on an ASUS A7V8X with a Promise Fasttrack onboard IDE RAID
controller.
--
Mark Saunders [EMAIL PROTECTED]
Cytek Pty Ltd
--
[EMAIL PROTECTED] mailing list
On Fri, Mar 28, 2003 at 02:19:01PM +1100, Mark Saunders wrote:
Which is the best supported IDE RAID chipset?
I'm after a motherboard with onboard IDE RAID support.
I gave up on an ASUS A7V8X with a Promise Fasttrack onboard IDE RAID
controller.
I'm certainly no expert here, but I have
I'm currently running a Debian Linux system. I'd like to move over to
gentoo, but I'm not exactly sure what the easiest way would be.
Mainly from the perspective of partitions: I have separate partitions
for root, boot, home, var, tmp and usr. I want to wipe all those
clean, except for home,
On Wed, 2003-08-27 at 23:40, Matt Garman wrote:
I'm currently running a Debian Linux system. I'd like to move over to
gentoo, but I'm not exactly sure what the easiest way would be.
Mainly from the perspective of partitions: I have separate partitions
for root, boot, home, var, tmp and usr.
Mike Diehl wrote:
Well, I went back to check. No, the virus protection is turned off. It
looks like I may have to do a dd on the drive and start over...
Have you tried app-admin/mbr? I suspect it does the same as fdisk /mbr, but
then again, it can't hurt.
--
Cheers,
Jani-Matti Hätinen
On Thursday 27 March 2003 23:32, Sundance wrote:
I heard Francesco Talamona said:
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.2.2/../../../../i686-pc-linux-
gnu/bin/ld: cannot find -lartsc
Known issue. It's an aRts installation bug. Here's an easy
workaround: ln -s /usr/kde/3.1/lib/libartsc.so
i think that i found a problem when emerging squid
/etc/conf.d/squid.cron
--- /etc/cron.weekly/
# ls -al /etc/conf.d/squid.cron
-rw-r--r--1 root root 36 Mar 28 07:21
/etc/conf.d/squid.cron
# cat /etc/conf.d/squid.cron
#!/bin/sh
/usr/sbin/squid -k rotate
i think squid.cron
On Fri, 2003-03-28 at 03:29, Scott Thomason wrote:
On Thu, 27 Mar 2003 17:12:12 -0800
david mattatall [EMAIL PROTECTED] wrote:
Try pulling out your RAM, scrub the leads with an eraser and reseed
them. It worked for me!
You might want to emerge the memtest86 package and use it to test
63 matches
Mail list logo
