Hello people,
I have run into another problem.. after recompiling my kernel today (which I
had to do actualy chrooted from the Live CD) and copying bzImage to /boot
... I got an error message immediately on rebooting that I have an INVALID
COMPRESSED KERNEL and everything was subsequently
Hi,
I emerged gcvs and it not work with original cvs. I get message:
alternate cvs have no support for GUI-pipes
Please select another binary or uncheck the alternate cvs'!
I think gcvs need patched cvs which have GUI-pipes support and it should
be installed whith gcvs but it was not. How can I
Hi all,
I've got a stange problem with PPPoE. I'm in the process of upgrading a
server to a new box and I'm trying to get the new server on the Internet
via PPPoE.
The old server works fine. I copied the config files from the old, to
the new server. When I plug the new server into the DSL
I don't happen to have any pcmcia card but an idea about finding the
location of pcmcia-cs drivers is to do a 'qpkg -l pcmcia-cs'. This will
give you a list of the files that were added to your system with the
pcmcia-cs package so the drivers should be somewhere in there. I hope
that helps a
Ron Keller wrote:
While trying to capture something with my tv tuner, I saw an eror
message I haven't seen in any of the other linux versions I've tried.
What have I missed?
oss: warning: got sample rate 32000 (asked for 44100)
My command line was as follows:
streamer -t 1:00 -s
Hi,
I'm having some problems getting the Java plugin to work on Mozilla. It
works fine on Konqueror. A little while ago, I upgraded my JDK to this
version:
goldfish plugins # java-config --list-available-vms
[sun-jdk-1.4.1.02] Sun JDK 1.4.1.02
(/etc/env.d/java/20sun-jdk-1.4.1.02) (*)
I have
Its got a 'd' at the end. So i would assume its a daemon.
therefore i would assume the config file lys in
/etc/conf.d/amavisd.conf
and the startup script in /etc/init.d/amavisd
or something like that.
[EMAIL PROTECTED] ~ $ date ; echo ${Jonathan Nichols}
Tuesday 10 June 2003 07:59 pm
I
Dan Fairs [EMAIL PROTECTED] wrote on 11 Jun 2003 10:42:00 +0100:
I'm having some problems getting the Java plugin to work on Mozilla. It
works fine on Konqueror. A little while ago, I upgraded my JDK to this
version:
goldfish plugins # java-config --list-available-vms
[sun-jdk-1.4.1.02] Sun JDK
Jason Tedesco [EMAIL PROTECTED] wrote on Wed, 11 Jun 2003 15:16:09 +1000:
Hi Guys,
Just wondering if anyone could give me any assistance in configuring my Cisco arionet
352 PCMCIA card. There are a few approaches you can take to install these drivers.
The ones I have found are,
1. Cisco
At 12:26 11/06/2003 +0200, you wrote:
Dan Fairs [EMAIL PROTECTED] wrote on 11 Jun 2003 10:42:00 +0100:
I'm having some problems getting the Java plugin to work on Mozilla. It
works fine on Konqueror. A little while ago, I upgraded my JDK to this
version:
goldfish plugins # java-config
Can anyone explain this anomaly? It seems that emerge -up world (even with
--deep) is not suggesting upgrades that should be performed, for example:
hp root # emerge -s kde
(trimmed for brevity)
* kde-base/kde
Latest version available: 3.1.2
Latest version installed: 3.1.1
On Wed, 11 Jun 2003 14:59, Dhruba Bandopadhyay wrote:
I'm curious if there are any built in tools to make
this transition a bit easier (or a good link w/ directions). Are there
any
http://www.gentoo.org/doc/en/new-upgrade-to-gentoo-1.4.xml
Wow :-)
That's a whole hell of a lot easier than
Hi,
Thanks for the answers so far...
- Christian Aust
i would also have to second the blackdown jdk. i emerged that and it set
itself up in mozilla and away it went
However, I do like to have the Sun JDK for the rest of the system. Is it
possible to install the blackdown JDK, and point Moz
1.) Can two packages be emerged at the same time (in
different consoles)?
2.) Is it possible to use .tar.gz files instead of
.tar.bz2 since the former (.tar.gz) compiles faster
eventhough it takes longer to download?
3.) If I were to do emerge kde then after say 10
packages, I have to stop,
On Wednesday 11 June 2003 11:25, Gëzim wrote:
2.) Is it possible to use .tar.gz files instead of
.tar.bz2 since the former (.tar.gz) compiles faster
eventhough it takes longer to download?
Hm, do you mean it unpacks faster?.. The difference between bz2 and gz, is
that BZIP2 compresses data
Hi,
I installed Debian, then I started liking gentoo and
installed it too. In debian, programs (e.g. xchat)
store my settings in my home directory (e.g.
/home/myusername/.xchat). But now that I have gentoo
installed, and a /home partiton, the gentoo settings
and the debian once will conflict (I
1.) Can two packages be emerged at the same time (in
different consoles)?
Yes, but HIGHLY UNRECOMMENDED, coz it could cause problems, if the two
package depends on each other or such ..
3.) If I were to do emerge kde then after say 10
packages, I have to stop, and do CTRL+C, what
--- Mikhail P. [EMAIL PROTECTED] wrote:
On Wednesday 11 June 2003 11:25, Gëzim wrote:
2.) Is it possible to use .tar.gz files instead of
.tar.bz2 since the former (.tar.gz) compiles
faster
eventhough it takes longer to download?
Hm, do you mean it unpacks faster?.. The difference
Hi,
Yesterday i've synced the portage tree and tried to emerge world. It
installed (or upgraded, I didn't notice) ant, and then tried to recompile
postgresql. The 'configure' script checked if ant is available and working
and then exited yelling that it's present, but not working. If you try to
On (11/06/03 13:58), keanu wrote:
try running regenworld
if that doesn't work, there is a script on the forums the catch 'flooting
packages' might wanna try that one 2
http://www.kolbu.com/gentoo/gencheck is also very useful
--
Martin Conolly [EMAIL PROTECTED]
GPG: BED1898C |
Gëzim Hoxha [EMAIL PROTECTED] writes:
Hi,
Hello,
asking if someone knows a way to tell gentoo ´´Store my settings for
your programs in /home/mysuername/gentoo´´ and likewise for debian
The easiest way i can think of to do this is to change your homedir
(this is in /etc/passwd, IIRC) both on
I've emerge xmms-cdread. How do I use xmms to play an audio cd?
--
Stephen
From here to there
and there to here,
funny things are everywhere. -- Dr Seuss
--
[EMAIL PROTECTED] mailing list
Try posting on comp.lang.python. Lots of friendly people there.
On Saturday 07 June 2003 08:38 pm, DAVID wrote:
I don't know about all that, but am getting back into
Python right now. As far as databases, I am currently
writing an app to do some stock analysis for me.
Beancounter (perl)
Hello,
I'm installing qt on one of my local computers, however I get the following
error (tried twice to compile, always end the same place). System is running
latest software, from x86. Has anyone had the same thing?
ln -s libqui.so.1.0.0 libqui.so
ln -s libqui.so.1.0.0 libqui.so.1
ln -s
Stephen Boulet wrote:
I've emerge xmms-cdread. How do I use xmms to play an audio cd?
Enable the plugin in the preferences menu and select add directory in
the playlist window. Then select /cdrom or whatever the mount point of
your cdrom is. That should work - at least for me it does ;-) .
Gëzim Hoxha wrote:
1.) Can two packages be emerged at the same time (in
different consoles)?
I would strongly suggest you don't do it. Both processes may quit from
errors.
2.) Is it possible to use .tar.gz files instead of
.tar.bz2 since the former (.tar.gz) compiles faster
eventhough it takes
Michael Gruetzner wrote:
Will an emerge -e world solve this problem(Iguess it will, but I'm not
This recompiles all packages with current settings and compiler. It is
generally a good idea if you intend to stay with the current version of
compiler for some time to come. If you are upgrading
Hello!
Sorry, for maybe offtopic, but I hope someone can help me.
I've come across a problem with phpBB e-mail notifications about changes in
topic.
I didn't get this e-mails at all, even though I had this option set in my
profile, and phpBB knows about it: there is a link Stop watching this
Mikhail P. wrote:
Hello,
I'm installing qt on one of my local computers, however I get the following
error (tried twice to compile, always end the same place). System is running
latest software, from x86. Has anyone had the same thing?
Well it looks like a segfault is causing it to fail. File
Hello
Just read about emerge info in some mail to this list, and ofcourse i
had to try it ;)
but, results confuse me :S
# emerge info | grep USE
USE=x86 3dnow apm avi crypt cups encode libg++ mikmod pdflib png
quicktime spell truetype xml2 xmms xv zlib gtkhtml gdbm berkdb slang
readline arts
Hello!
Is it nessessary to use 'usermod' to add user to some group?
Or may I just edit /etc/group file and enter new username after comma on the
line containing the group I want to add user to?
I'm asking this because I want to add user to portage group, and 'usermod -G'
wants ALL groups to be
On (11/06/03 17:39), Dmitry Suzdalev wrote:
Is it nessessary to use 'usermod' to add user to some group?
Or may I just edit /etc/group file and enter new username after comma on the
line containing the group I want to add user to?
I'm asking this because I want to add user to portage group,
Hi,
Yesterday i've synced the portage tree and tried to emerge world. It
installed (or upgraded, I didn't notice) ant, and then tried to recompile
postgresql. The 'configure' script checked if ant is available and working
and then exited yelling that it's present, but not working. If you
Editing of /etc/group as you described is enough.
Mikhail.
On Wednesday 11 June 2003 13:39, Dmitry Suzdalev wrote:
Hello!
Is it nessessary to use 'usermod' to add user to some group?
Or may I just edit /etc/group file and enter new username after comma on
the line containing the group I
Martin Larsson wrote:
where are all the USE flags in emerge info coming from? for example
cups
From /etc/make.globals and /etc/make.profile/make.defaults. No need to
touch any of those, if you want to get rid of cups, just put -cups in
/etc/make.conf, that overrides the other two.
Cheers
On Wed, 11 Jun 2003, Dmitry Suzdalev wrote:
Is it nessessary to use 'usermod' to add user to some group?
Or may I just edit /etc/group file and enter new username after comma on the
line containing the group I want to add user to?
'gpasswd' is what you want.
--
Marshal Newrock, Simon's Rock
On ons, 2003-06-11 at 14:01, Ulrich Plate wrote:
Martin Larsson wrote:
where are all the USE flags in emerge info coming from? for example
cups
From /etc/make.globals and /etc/make.profile/make.defaults. No need to
touch any of those, if you want to get rid of cups, just put -cups in
Thanks Martin, Mikhail, Marshal!
You've been very helpful to me.
I didn't know about 'id' and about 'gpasswd'.
Thanks very much again.
Dmitry.
--
[EMAIL PROTECTED] mailing list
You don't need that for audio CDs. Just merge XMMS, then
under options/preferences setup the input option for CD
output options (make sure your sound is working). Insert
CD, click eject button on XMMS and you get a directory
list. Go to the directory (usually /dev/cdrom) you put
under
Unless specifically negated USE flags are assumed to be
true. So if you don't put -flag in the USE variable
Gentoo acts as if it's flag. The list below probably
shows all the flag's states.
On 11 Jun 2003 15:45:44 +
Martin Larsson [EMAIL PROTECTED] wrote:
Hello
Just read about emerge
I'd recommmend usermod.
Do cat /etc/group | grep username
where username is the user's name.
On Wed, 11 Jun 2003 17:39:05 +0400
Dmitry Suzdalev [EMAIL PROTECTED] wrote:
Hello!
Is it nessessary to use 'usermod' to add user to some
group?
Or may I just edit /etc/group file and enter new
Great, it worked. Does it mean, that when I have java in my USE list, it
will try to compile every package using ant? It makes no sense at all.
On Wed, 11 Jun 2003, Mike D. wrote:
Hi,
Yesterday i've synced the portage tree and tried to emerge world. It
installed (or upgraded, I didn't
On 10 Jun 2003 13:40:46 -0700
Spundun Bhatt [EMAIL PROTECTED] wrote:
Hi
I tried to updatge lmule today and it choked in compile.
Yeah, I've got this problem too. Haven't given it much thought, since
I don't use it that much anyway
...
There seems to be conflict between wxWindows
On 11 Jun 2003 12:09:22 +0100
Dan Fairs [EMAIL PROTECTED] wrote:
However, I do like to have the Sun JDK for the rest of the system. Is
it possible to install the blackdown JDK, and point Moz at the
Blackdown plugin, but use the Sun JDK as my 'day-to-day' JDK? Hmmm...
Yes it is. The problem is
Hello everyone,
emerge ufed;
(a nice ncurses based util.)
As stated previously, /etc/make.globals and
/etc/make.profile/make.defaults determine the default use setting.
ufed will indicate this and allow you to adjust accordingly.
To flag + to all flags use cvs.( a special use flag )
HTH,
j
Yes, I wasn't aware of the id command either - that would
be easier.
Not sure what's wrong now - maybe log out then log back in
even if you did it from the xterm.
On Wed, 11 Jun 2003 18:23:40 +0400
Dmitry Suzdalev [EMAIL PROTECTED] wrote:
Thanks, brett.
I've already done what I wanted --
Hi,
There are two different solutions to your situation: you can either
emerge the new Blackdown java for Mozilla, and use the pre-compiled sun
java for everything else (except if you want to compile OO, since it
seems to want blackdown java), or you can do what I did and compile the
sun
On Wed, Jun 11, 2003 at 06:23:40PM +0400, Dmitry Suzdalev wrote:
Thanks, brett.
I've already done what I wanted -- using 'id username' and then 'usermod'.
Now I have another problem: Portage still says that user is not in 'portage'
group...
'less /etc/group' shows that he is there, but
On Wed, 11 Jun 2003, Dmitry Suzdalev wrote:
Now I have another problem: Portage still says that user is not in 'portage'
group...
'less /etc/group' shows that he is there, but 'emerge -s no-matter-what'
thinks in another way :).
Do I have to take some additional steps? I tried to exit from
On Wednesday 11 June 2003 14:39, Dmitry Suzdalev wrote:
I'm asking this because I want to add user to portage group
What is the reason for wanting a user to be in the portage group? Are you
aware that anyone in that group can gain root access quite easily?
--
[EMAIL PROTECTED] mailing list
I just recently emerge'd the latest version of lmule (1.2.0.1). It starts just
fine. The problem comes when I try to do a search. As soon as I hit enter to
start the search, the system immediately becomes sluggish. I switch over to a
terminal and run top. lmule is using 98% CPU and over 40% RAM
[EMAIL PROTECTED] writes:
Hi,
Yesterday i've synced the portage tree and tried to emerge world. It
installed (or upgraded, I didn't notice) ant, and then tried to recompile
postgresql. The 'configure' script checked if ant is available and working
and then exited yelling that it's
Hi !
Abit KD7-RAID has HPT-372 pseudo raid chipset onboard ...
Raid firmware is a part of std BIOS and it's version is 2.1 (the last
from HPT is 2.345),
I found compiled modules to kernel here:
http://www.highpoint-tech.com/372drivers_down.htm
which are probably unusable, because HPT
On Wednesday 11 June 2003 18:36, [EMAIL PROTECTED] wrote:
You're running a desktop session? If so, you need to exit and restart
that. Starting another xterm isn't really logging in - it's just starting
another process associated with the running desktop.
Yes, I'm running KDE session.
Thanks
On Wednesday 11 June 2003 18:42, Marshal Newrock wrote:
There's another quick-n-dirty option. 'sg portage' will put you in group
portage (which you can do since /etc/group shows you in portage). You'll
have to do this for each xterm until you fully log out and log in again.
You will still be
On Wednesday 11 June 2003 18:53, Toby Dickenson wrote:
What is the reason for wanting a user to be in the portage group? Are you
aware that anyone in that group can gain root access quite easily?
The reason is that I don't want to see those red-colored lines that always
pop out if I issue
I could not compile at-spi without editing about 5 - 10 files and adding
the sdtio.h line manually.
I had been running gcc-3.3 for a while, but then decided to downgrade
and recompile everything since the gcc upgrade.
Wonder if anyone else has seen anything like this or knows what's going
on!
Hi there,
I just started an emerge -e world. After a few packages it faild while
compiling sys-libs/db.
The error message of the configure script is:
checking for integral type equal to pointer size...configure: error: can
not run test program while cross compiling
what does that mean? And why
Silly situation, but I just set up ntpd
at work, and now I am off site trying to serial connect into a Nortel
Switch. Thing is Gentoo hangs at boot
trying to sync ntpd.
Is there any possible way to get past this at boot time, or
disable it during the boot.
Any advice is
http://www.google.ca/search?q=cache:PdPnsK8TP_oJ:lmule.org/+lmule+lockuphl=enie=UTF-8
See
Random crash on search
Posted by: octane on Friday, April 25, 2003 - 01:53 PM
Release 1.2.0 introduced an occasional crash/lockup when searching which caused
lmule to consume all available CPU (and
Hi all,
is there any easy way to keep Kmail (all mail
Folders/Filter rules/Address/Identities etc) in sync between two systems (both
running gentoo with KDE 3.1.2) apart from copying all folders and rc files
across the machines ?
Regards
R'twick
You can remove it from boot with:
rc-update del ntpd default
I stopped using ntpd and just put ntpdate in my /etc/conf.d/local.start file.
# ntpd doesn't work to well so use this for clock setting
ntpdate ntp0.mcs.anl.gov
not sure if this would stop the problem if it cannot connect to the
If you keep having to mess with voltages that doesn't
sound like a software problem. I'd take that board back
and get another one. You had problems even with RH.
On Wed, 11 Jun 2003 18:03:21 +0200
Norbert Kamenicky [EMAIL PROTECTED] wrote:
Hi,
yesterday I first time started to play with
My terminal is runing fbdev/vesa on 800x600. Is there a way to change refresh
rate? My
eyes are burning. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
On Wednesday 11 June 2003 17:58, R'twick Niceorgaw wrote:
is there any easy way to keep Kmail (all mail Folders/Filter
rules/Address/Identities etc) in sync between two systems (both running
gentoo with KDE 3.1.2) apart from copying all folders and rc files across
the machines ?
Use imap.
Or
Hello,
Append @Hz to your vga line just after res.
HTH,
j
Meka[ni] said:
My terminal is runing fbdev/vesa on 800x600. Is there a way to change
refresh rate? My
eyes are burning. :o)
Meka[ni]
--
[EMAIL PROTECTED] mailing list
--
[EMAIL PROTECTED] mailing list
Robert Young wrote:
http://www.google.ca/search?q=cache:PdPnsK8TP_oJ:lmule.org/+lmule+lockuphl=enie=UTF-8
See
Random crash on search
Posted by: octane on Friday, April 25, 2003 - 01:53 PM
Release 1.2.0 introduced an occasional crash/lockup when searching which caused
lmule to consume all
Try this first
http://bugs.gentoo.org/show_bug.cgi?id=22059
Andrew Gaffney wrote:
Robert Young wrote:
> http://www.google.ca/search?q=cache:PdPnsK8TP_oJ:lmule.org/+lmule+lockuphl=enie=UTF-8
>
> See
>
> Random crash on search
> Posted by: octane on Friday, April 25, 2003 - 01:53 PM
>
>
> Release
Thanks Arnold and Peter,
Here's what i'm thinking of
I 'm going to use imap on my laptop, use fetchmail to organize my mails in
the desktop machine. That will remove necessity to sync Mail folder and
filter.
I'll only sync std.vcf file between the machines for addressbook ( and I
think by
Finally figured it out. I was stuck at the boot, but found out how to
boot single user mode via grub and then removed it alla rc-update. All
is good now
I will take your advice about adding ntpdate to my local.start.
Although I think adding to Cron would be better. I'll try both.:)
Thanks
hello,
What is the recommended file-max limit for a mail server. I have our
ISPs set to 8192, but they get filled up rather quickly.
Bobby
--
[EMAIL PROTECTED] mailing list
[EMAIL PROTECTED] ~ $ date ; echo ${MooktaKiNG}
Wednesday 11 June 2003 07:41 am
Its got a 'd' at the end. So i would assume its a daemon.
therefore i would assume the config file lys in
/etc/conf.d/amavisd.conf
and the startup script in /etc/init.d/amavisd
or something like that.
Ouch!..
Hi
Since updating my system (emerge -u --deep world) last night (I'm ~x86) I
seem to be having problems with GTK-2 apps. Every one I've tried
displays:-
Gdk-WARNING **: The X server advertises that RENDER support is present,
but fails to supply the necessary pixmap support. In
other words,
Does anybody has a script for removing old
files from /usr/portage/packages ?
I have been accumalating package files (*.tbz2)
produced by emerge whith the --buildpkg option.
Now I want to (automatically) remove the older
ones if there are different versions for the
same package.
Any help?
Hello,
Thanks, good to know.
j
Theofilos Intzoglou said:
I think that when using the vesa fb you cannot change the refresh
rate. It stays still at 60Hz even if you tell it to run at 72Hz which is
a bit better for the eyes :-/
On Wed, 11 Jun 2003 16:24:24 +
Meka[ni] [EMAIL PROTECTED]
I believe if you put 'AUTOCLEAN=yes' in your /etc/make.conf it should
clean things up automatically.
John
-Original Message-
From: Jose Romildo Malaquias [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 11, 2003 1:52 PM
To: [EMAIL PROTECTED]
Does anybody has a script for removing old
How can I configure lilo so that I can choose between 2 windows installations
and gentoo linux etc..
I must make one of the 2 windows partitions hidden but I don't know how :-/
any help is welcome
--Kees
--
[EMAIL PROTECTED] mailing list
I have just
installed my first gentoo server, and am using VIto edit files.
Here
is the problem when I am in insert mode "i" and I press the up arrow key and
new
line is inserted with the letter "A". When I press the right arrow the
letter "C" is inserted in a new line. By pressing the down
[EMAIL PROTECTED] wrote:
I have just installed my first gentoo server, and am using VI to edit
files. Here is the problem when I am in insert mode i and I press
the up arrow key and new line is inserted with the letter A. When I
press the right arrow the letter C is inserted in a new line.
Alan wrote:
On Wed, Jun 11, 2003 at 08:43:56PM +0100, Gareth John wrote:
[snip]
Try emerging vim instead of vi. I'm sure someone out there knows
how to make standard vi understand the arrow keys, but vim does it
out of the box.
Or get your fingers to learn hjkl as your arrow movement
Is there a standard method for getting the temperature from the system?
--
[EMAIL PROTECTED] mailing list
Alan said:
On Wed, Jun 11, 2003 at 08:43:56PM +0100, Gareth John wrote:
[snip]
Try emerging vim instead of vi. I'm sure someone out there knows how to
make standard vi understand the arrow keys, but vim does it out of the
box.
Or get your fingers to learn hjkl as your arrow movement keys.
Hey, its worth a try.
never tried amavis before.
But thats how its usually is. :-)
[EMAIL PROTECTED] ~ $ date ; echo ${MooktaKiNG}
Wednesday 11 June 2003 07:41 am
Its got a 'd' at the end. So i would assume its a daemon.
therefore i would assume the config file lys in
That helps. I was looking actually for a low level type thing, but its
as I expected, there's no standard once again. Its us software
developers who are smart enough to make standards, not hardware
developers!
On Wed, 2003-06-11 at 21:22, wes chow wrote:
emerge sys-apps/lm-sensors
On Wed,
David [EMAIL PROTECTED] wrote:
You can remove it from boot with:
rc-update del ntpd default
I stopped using ntpd and just put ntpdate in my /etc/conf.d/local.start file.
# ntpd doesn't work to well so use this for clock setting
ntpdate ntp0.mcs.anl.gov
not sure if this would stop the
Don't forget the most important, sound ;) All the stuff under sound, and
snd isn't. I believe its set to the current user AT the machine with
group audio. Although mine just could be screwed up.
On Wed, 2003-06-11 at 23:54, Robin H.Johnson wrote:
On Wed, Jun 11, 2003 at 03:31:00PM -0700, Zack
has anyone read ${SUBJECT} as VIrusses ??? :-)
Norberto
pgp0.pgp
Description: signature
On your second thing:
There are two versions of gkrellm - 1 and 2 and different plugins for each.
Check the description to see which is which. I installed 2 and just don't
install add-ons for 1.
Two things:
Does lm-sensors work with the ASUS A7N8X motherboard because I haevn't been
able
88 matches
Mail list logo
