Can I update/patch acpi of gentoo-sources to some version
more current?
I just upgraded to vanilla 2.4.21 + acpi patch (from sourceforge).
I didn't use emerge to get the kernel or patch, just remerged my
driver packages after building and rebooting the new kernel
(alsa-driver, xfree-drm,
On Thu, Jul 03, 2003 at 11:47:49PM +, drewbian wrote:
Most certainly, I had mentioned in my origional email as the basis for
my confusion as it contains a number of conflicting posts.
Sorry about that--I only caught the tail end of the thread.
Owen
--
[EMAIL PROTECTED] mailing list
On Fri, 4 Jul 2003, Robert Bragg wrote:
My point was (I still think this is correct) that if his setup is
resulting in his clock getting out of sync on a daily basis, by 20-30
minutes then he has bigger problems to think about before he starts
playing with ntpd.
True, true.. I stopped using
Hi all,
I keep getting the following error when I try to update my system.
Updating Portage cache... \!!! eclass 'GPL-2' in 'GPL-2' does not exist:
...done!
What do I need to do to correct this?
regards
Paul
--
** This message has been sent using GENTOO Linux and kmail *
Hi all,
These are the packages that I would merge, in order:
Calculating world dependencies ...done!
[ebuildU ] net-print/cups-1.1.19 [1.1.18-r5]
This is the error tail
checking jpeglib.h usability... /usr/sbin/ebuild.sh: line 1178: 9842
Segmentation fault ./configure
Hello,
has anyone successfully set up sapdb under gentoo? I just installed it
and it 'seems' to work but I cannot access the web interface(although
wahttp is running). Is there something like sqlplus on oracle?
Thanky you for any hints.
MfG
Michael
--
/*
* For moronic filesystems that do not
Jens Hoffrichter wrote:
Hi everyone,
To install a netscape directory-server 4.16 I need a library called
libstdc++-libc6.1-1.so.2. On Debian it is installed by a package
called libstdc++2.9-glibc2.1.
On my Gentoo system I can't find a library with this name, and neither
a package with this name.
I installed a minimal GENTOO system (no X, etc.) with
USE=nptl -X -gtk -gnome -alsa
ACCEPT_KEYWORDS=~x86
starting from stage1 and installed the Linux 2.5.74-mm1 kernel.
So far, so good.
A phenomenon I experience quite often is that the IO-Wait value in
top goes up to 99% and
On Fri, Jul 04, 2003 at 01:01:51PM +0200, Michael Gruetzner wrote:
To install a netscape directory-server 4.16 I need a library called
libstdc++-libc6.1-1.so.2. On Debian it is installed by a package
called libstdc++2.9-glibc2.1.
On my Gentoo system I can't find a library with this name,
Hi all,
I recently (you help me a lot) installed gentoo on my pc. Just now (me
stupid) I realized that I compiled everything with default CFLAGS. So
that I didn't use the main nice gentoo's feature.
Now, that the system is working, (almost everything) I would like to
re-emerge (or recompile)
Hi,
Has anyone worked out how to get spamassassin working with the The
Virtual/Mailhost HOWTO
http://www.gentoo.org/doc/en/virt-mail-howto.xml, procmail sends the
messages to well who knows but I dont get them. Or is there a way to get
postfix to use spamassassin without procmail.
Regards
There is more than one cause. Check the forums, its full of this
issue. The definite cause for me on a celery dell laptop was the gnome
battery applet. It has a known bug (fixed???) where it stalls the
machine whilst reading /proc under apm.
On a later machine with a much faster p4, you can
Alberto Bert [EMAIL PROTECTED] wrote on Fri, 4 Jul 2003 13:17:53 +0200:
Now, that the system is working, (almost everything) I would like to
re-emerge (or recompile) everything, but really everything, using more
convenient CFLAGS (still I don't have a lot of packages.)
Is that possible? And How?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 03 July 2003 11:16 pm, Norberto BENSA wrote:
Yep, that *was* the error with 0.6.7 (actually, it was No
passphrase.) Perhaps a regression? Here's the patch (from portage)
Yea, that was it. Odd that I have the same problem with 0.6.8 and
Hi all,
I've renamed ebuild anjuta-1.1.1 to anjuta-1.1.97 and then I did:
ebuild /usr/portage/dev-util/anjuta/anjuta-1.1.97.ebuild digest
and everything went just fine.
Then I did:
euler root # emerge -up dev-util/anjuta-1.1.97.ebuild
These are the packages that I would merge, in order:
On 04 Jul 2003 13:23:29 + Paulo Jorge de Oliveira Cantante de Matos
wrote:
Hi all,
I've renamed ebuild anjuta-1.1.1 to anjuta-1.1.97 and then I did:
ebuild /usr/portage/dev-util/anjuta/anjuta-1.1.97.ebuild digest
and everything went just fine.
Then I did:
euler root # emerge -up
William Kenworthy [EMAIL PROTECTED] wrote:
There is more than one cause. Check the forums, its full of this
issue. The definite cause for me on a celery dell laptop was the gnome
battery applet. It has a known bug (fixed???) where it stalls the
machine whilst reading /proc under apm.
On
I get an error merging vim-6.2
No rule to make target auto/configure
Any fixes?
MIKE
--
Beware the JabberOrk
--
[EMAIL PROTECTED] mailing list
You might want to give the latest dev kernel a whirl ... I've had very
good experiences with 2.5.74.
Sean
On Fri, 2003-07-04 at 00:29, Christian Aust wrote:
Hi all,
gentoo-sources 2.4.20-r5 is nice and powerful, but unfortunately has
older ACPI sources which my laptop desperately needs
I have disabled ACPI, and all Power Management.
Weston
Gwendolyn van der Linden wrote:
Hopefully this is just a interrupt, or I/O port issue
Are you using ACPI? Some laptops have trouble with that.
You can either get the latest acpi patch, or disable it altogether.
On Friday 04 July 2003 07:41, Kurt V. Hindenburg wrote:
On Thursday 03 July 2003 11:16 pm, Norberto BENSA wrote:
Yep, that *was* the error with 0.6.7 (actually, it was No
passphrase.) Perhaps a regression? Here's the patch (from portage)
Yea, that was it. Odd that I have the same problem
On Thursday 03 July 2003 22:13, Ernie Schroder wrote:
I need some sound advice. When I start KDE I geta cryptic warning about
Lets see... ( I am not at all an expert! )
$ krec
mcop warning: user defined signal handler found for SIG_PIPE, overriding
/tmp/mcop-ernie is accessible owned by
On Friday 04 July 2003 09:45 am, Arnold Krille wrote:
On Thursday 03 July 2003 22:13, Ernie Schroder wrote:
I need some sound advice. When I start KDE I geta cryptic warning
about
Lets see... ( I am not at all an expert! )
$ krec
mcop warning: user defined signal handler found for
Happy Fourth all,
I'm wondering if this is a problem on my end or on the Gentoo end
Both yesterday and today I've experienced periods of time when I've
received no list posts for several hours. Yesteday when I finally
recieved posts I got 34 at once. Today, about an hour ago I got
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi everybody
I have used vmware-workstation (first 3.2 and later 4.0) without Gentoo
specific problems for some time.
However, a few days ago, I discovered I could not start any virtual
machines anymore (neither with 3.2 nor with 4.0). Apparently
On Friday 04 July 2003 07:11, Derek Clarkson wrote:
Thanks for the reply,
Can you point me at a list of the available sources and what each
one is ?
emerge -s sources
will give you a list. (There might be some other packages as well, but
mostly these are kernel sources)
The question
Hello
I'm using courier-imap, postfix and procmail for email. However, I just
cannot filter gentoo-user into its own folder. What should the recipe
syntax and environment variables be? Can you give me an example that
works?
So far, I have tried the following.
MAILDIR=$HOME/.maildir/
Hi all again,
Sorry for replying to my own post but I have just tried again and have a
different error:-
In file included from /usr/include/time.h:42,
from ../cups/http.h:36,
from ../cups/ipp.h:35,
from ../cups/cups.h:34,
from
There must be something simple missing, but I can't see it.
I have
1. emerged module-init-tools-0.9.12
2. emerged sys-kernel/development-sources/development-sources-2.5.74
3. Copied over my old .config
4. make mrproper no longer supported
5. Ran make oldconfig and took all defaults for new stuff
Following up on my mplayer help post, I decided to assume that it was
the radeon card that caused mplayer to break. I tried to emerge the
ati-drivers package, but that resulted in this error:
ACCEPT_KEYWORDS=~x86 sudo emerge ati-drivers
Password:
Calculating dependencies ...done!
emerge (1
Collins Richey wrote:
There must be something simple missing, but I can't see it.
I have
1. emerged module-init-tools-0.9.12
2. emerged sys-kernel/development-sources/development-sources-2.5.74
3. Copied over my old .config
4. make mrproper no longer supported
5. Ran make oldconfig and took all
On Fri, 4 Jul 2003 15:31:11 +0100 (BST)
Dhruba Bandopadhyay [EMAIL PROTECTED] wrote:
Hello
I'm using courier-imap, postfix and procmail for email. However, I just
cannot filter gentoo-user into its own folder. What should the recipe
syntax and environment variables be? Can you give me
On Fri, Jul 04, 2003 at 01:17:53PM +0200, Alberto Bert wrote:
I recently (you help me a lot) installed gentoo on my pc. Just now (me
stupid) I realized that I compiled everything with default CFLAGS. So
that I didn't use the main nice gentoo's feature.
Now, that the system is working, (almost
quote who=Patrick Marquetecken
MAILDIR=$HOME/.maildir
gentoo-user/.
Thanks. I made these changes and waited a while but it's still putting
all mails in Inbox. Is there anything else that needs to be done other
than creating the rc file? Getting all the list mails in one inbox is
just
On Fri, 4 Jul 2003 17:57:19 +0100 (BST)
Dhruba Bandopadhyay [EMAIL PROTECTED] wrote:
Here's what I use:
:0
* ^List-Id:.*gentoo-user\.gentoo\.org
.Gentoo.User/
That would put the mail in INBOX/Gentoo/User dir. If you want just a normal
gentoo-user dir, then try with .gentoo-user/.
Hope it
i'm trying to setup a development server here @work and i've run into a minor
snag. what i want is to allow a bunch of different users access to a
directory so they can read/write files. but i want each person to have a
different login since every once in a while a user leaves the company,
If Kmail stores mail in mbox format you can import these into
Evolution from: File - Import menu.
On Fri, 2003-07-04 at 01:07, Reg HUGHSON wrote:
Does anyone know how I can transfer my email already received by Kmail
to Evolution?
--
[EMAIL PROTECTED] mailing list
--
Lincoln A.
daniel wrote:
snip
is there a proper way to do this? ideally, i want to be able to connect via
samba, nfs, (development box) and ftp and ssh (live box).
Create a group and add have them all as members of the group
set group rw on the directory.
--Mike
--
[EMAIL PROTECTED] mailing list
On July 4, 2003 01:24 pm, Mike Roest wrote:
daniel wrote:
snip
is there a proper way to do this? ideally, i want to be able to connect
via samba, nfs, (development box) and ftp and ssh (live box).
Create a group and add have them all as members of the group
set group rw on the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 04 July 2003 13:34, daniel wrote:
On July 4, 2003 01:24 pm, Mike Roest wrote:
daniel wrote:
snip
is there a proper way to do this? ideally, i want to be able to
connect via samba, nfs, (development box) and ftp and ssh (live
On Fri, 04 Jul 2003 10:14:59 -0500
Andrew Gaffney [EMAIL PROTECTED] wrote:
Collins Richey wrote:
There must be something simple missing, but I can't see it.
I have
1. emerged module-init-tools-0.9.12
2. emerged sys-kernel/development-sources/development-sources-2.5.74
3. Copied
On July 4, 2003 01:46 pm, Mike Wojcikiewicz wrote:
i did that, but then if a user creates a directory inside that directory,
it has permissions of 755, not 775. so that only works one level deep.
if i could force nfs and to write files with g+w permissions, then i
could abandon ssh and
On July 4, 2003 01:55 pm, daniel wrote:
oops, i forgot one step:
# mkdir directory
# chown nobody.users directory
# chmod 4775 directory
# exit
$ touch directory/asdf
$ ls -l directory
-rw-r--r--1 username users 0 Jul 4
On Friday 04 July 2003 00:56, Hemmann, Volker Armin wrote:
this DOES NOT influence the speed of the spindle. It just affects how fast
the heads are accelerated/decellerated and moved into their positions.
So, if I understand you right I would get speed increase if I try to make this
value
--- [EMAIL PROTECTED] wrote:
I have the same issue, did you find a solution?
java-config --set-system-vm=blackdown-jdk-1.4.1
Quoting james jones [EMAIL PROTECTED]:
Is this a problem with my config or should I bug this problem?
sudo emerge openoffice
Password:
Calculating
Hi,
Anyone know of any ad killers for linux? Like banner
ads, popups, etc.
junkbuster should be in portage
It is, but I second a previous poster's advice to use privoxy. As
mentioned in the privoxy FAQ (http://www.privoxy.org/faq/index.html)
Junkbuster development has stopped a long time
Hello Richey,
On Fri, 4 Jul 2003 11:51:55 -0600
Collins Richey [EMAIL PROTECTED] wrote:
UNIX98_PTY support is on, and I can't see anything else obvious
that's missing in the configuration.
Any ideas?
Since 2.5.x the devfs does _not_ mount /dev/pts! You have to mount it
yourself. BTW the
Happy Fourth all,
I'm wondering if this is a problem on my end or on the Gentoo end
Both yesterday and today I've experienced periods of time when I've
received no list posts for several hours. Yesteday when I finally
recieved posts I got 34 at once. Today, about an hour ago I
:0
* ^List-Id:.*gentoo-user
gentoo-user
I use:
:0:
* ^Mailing-List:[EMAIL PROTECTED]
$MONTH/gentoo-user
Obviously change $MONTH if that's not what you want. I have my mail
automatically sorted by month. If anyone is interested in my setup, let
me know. It's really pretty nice. Every
On Friday 04 July 2003 22:04, Dmitry Suzdalev wrote:
So, if I understand you right I would get speed increase if I try to make
this value larger?
s/ would / wouldn't /
Sorry.
Dmitry.
--
[EMAIL PROTECTED] mailing list
On Fri Jul 04, 2003 at 07:00:51PM +0200 or thereabouts, Bluesman wrote:
On Fri, 4 Jul 2003 17:57:19 +0100 (BST)
Dhruba Bandopadhyay [EMAIL PROTECTED] wrote:
Here's what I use:
:0
* ^List-Id:.*gentoo-user\.gentoo\.org
.Gentoo.User/
That would put the mail in INBOX/Gentoo/User dir. If
Create .bashrc in username's home directory and put into it:
umask 007
Then username will create files that will have -rw-rw---.
If you need unique groups then you need I think set up something similar
what RH has:
I have a gentoo install running fine on a 30GB drive. I just got a 60GB
drive that I would like to switch to.
I know how to add the 60GB as a second drive, but what I really want is
the current install from the 30GB installed on the 60GB.
I know I could dd the old partitions, but I'd like to
On Mon, 2003-06-30 at 16:10, Marius Mauch wrote:
On 27 Jun 2003 13:47:42 -0300 Alcino Dall Igna Junior wrote:
What is the utility of SRC_URI in ebuilds if portage doesn't use it?
I set a specific SRC_URI in an ebuild but portage try to fetch from a
mirror, where the files doesn't
Hello.
What is an easy way of finding and removing broken
links in a given directory?
Romildo
--
[EMAIL PROTECTED] mailing list
Mark Knecht wrote:
Is there an ebuild for gscanbus anywhere?
I am looking for that tool two. Maybe someone should fill in a bug report.
BTW, is it possible to boot gentoo from an external 1394 hardrive? I guess,
I need a boot disk. I would like to wear my linux system in a pocket of my
Coming back to a problem you discussed a few days ago, you know, the old:
--
!!! ERROR: x11-base/xfree-drm-4.3.0-r4 failed.
!!! Function src_unpack, Line 114, Exitcode 0
!!! Please set at least one video card in VIDEO_CARDS. USE is deprecated.
--
thing. Here's what I get when I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
find . -type l | while read ln; do if [ \! -s $ln ];then echo $ln; fi; done
- --Erik
On Friday 04 July 2003 22:06, [EMAIL PROTECTED] wrote:
Hello.
What is an easy way of finding and removing broken
links in a given directory?
-BEGIN PGP
On Fri, 4 Jul 2003 20:25:56 +0200
Florian Huber [EMAIL PROTECTED] wrote:
Hello Richey,
On Fri, 4 Jul 2003 11:51:55 -0600
Collins Richey [EMAIL PROTECTED] wrote:
UNIX98_PTY support is on, and I can't see anything else obvious
that's missing in the configuration.
Any ideas?
Since
Larry Wright wrote:
Can anyone give me some pointers?
Search the forum at www.gentoo.org for linux-wlan-ng. You will find some
good installation tipps.
mg
--
[EMAIL PROTECTED] mailing list
On Friday 04 July 2003 20:36, Dmitry Suzdalev wrote:
On Friday 04 July 2003 22:04, Dmitry Suzdalev wrote:
So, if I understand you right I would get speed increase if I try to make
this value larger?
s/ would / wouldn't /
maybe you are getting some speedups related to random file access,
On Fri, Jul 04, 2003 at 10:25:00PM +0300, Erik S. Johansen wrote:
find . -type l | while read ln; do if [ \! -s $ln ];then echo $ln; fi; done
On Friday 04 July 2003 22:06, [EMAIL PROTECTED] wrote:
What is an easy way of finding and removing broken
links in a given directory?
Thanks
Collins Richey [EMAIL PROTECTED] writes:
[ ... ]
No framebuffer support, but the ^%$£ 2.5 config turned off VGA
console support!
I've had the same problem over and over again with 2.5.*, with or
without VGA console support.
of course, 2.5.74 fails upon building spb2 (FireWire storage
Hello.
I am having no success in running the Opera web browser
in my (unstable) Gentoo Linux. Even after searching
the Gentoo forums and Opera forums, I could not
make it work for me.
When running opera, it just shows the message
/usr/bin/opera: line 156: 736 Segmentation fault
On Friday 04 July 2003 23:45, Hemmann, Volker Armin wrote:
maybe you are getting some speedups related to random file access, and I
for myself have set my drives to quiet most of the time and switch, when I
know that some stress (like emerging glibc, kde, gcc) is coming up.
My disks don't
On Friday 04 July 2003 11:45 am, Chris Bare wrote:
I have a gentoo install running fine on a 30GB drive. I just got a 60GB
drive that I would like to switch to.
I know how to add the 60GB as a second drive, but what I really want is
the current install from the 30GB installed on the 60GB.
I
Please see
gentoo-user] Re: eclass 'GPL-2' in 'GPL-2' does not exist
in this mailling list
Paul Stear wrote:
Hi all,
I keep getting the following error when I try to update my system.
Updating Portage cache... \!!! eclass 'GPL-2' in 'GPL-2' does not exist:
...done!
What do I need to do
On do, 03 jul 2003, Norberto BENSA wrote:
BTW, there's an ebuild: emerge privoxy :-)
Yup I know :) I'm running it together with Squid on my (Debian)
server. However, it seems that this combination slows down my
connection... Running each program standalone doesn't give this
problem. Are there
I hate alsa, but that's now the only way to fly.
Well, I have my 2.5.74 kernel up and running. Now what about alsa?
I've followed the releveant portions (alsa drivers are now in the
kernel) of the alsa documentation:
1) Updated /etc/modules.d/alsa with seemingly correct stuff
2) modules-update
Le 07/04/03 Dhruba Bandopadhyay [EMAIL PROTECTED] a écrit notamment:
Hello
I'm using courier-imap, postfix and procmail for email. However, I just
cannot filter gentoo-user into its own folder. What should the recipe
syntax and environment variables be? Can you give me an example that
On Fri, Jul 04, 2003 at 11:42:59AM +0200, Joel Palmius wrote:
Although, what to do when it seems it is the system *software* that seems
to mess up time and there seems to be no explanation as to why?
These are the explanations I've heard so far for the lagging time
behavior:
[...]
*
* Patrick Marquetecken [EMAIL PROTECTED] [04.07.03 18:17]:
On Fri, 4 Jul 2003 15:31 Dhruba Bandopadhyay [EMAIL PROTECTED] wrote:
MAILDIR=$HOME/.maildir/
MAILDIR=$HOME/.maildir
man procmailrc
If the mailbox name ends in /, then this directory
is presumed to be a maildir folder
* Dhruba Bandopadhyay [EMAIL PROTECTED] [04.07.03 16:31]:
I'm using courier-imap, postfix and procmail for email. However, I just
cannot filter gentoo-user into its own folder. What should the recipe
syntax and environment variables be? Can you give me an example that
works?
Do you have
I cannot send messages from Kmail: they get to the MTA (qmail) and there
they stay:
root $ /var/qmail/bin/qmail-qstat
messages in queue: 7
messages in queue but not yet preprocessed: 0
Moreover, top and ps aux show 4 supervise-related zombies, which may or
may not have something to do with this
On Fri, Jul 04, 2003 at 09:12:37PM +0200, Martin Gramatke wrote:
BTW, is it possible to boot gentoo from an external 1394 hardrive? I guess,
I need a boot disk.
In general, what you can boot off of is the domain of the BIOS, including
the subsidiary BIOS on whatever cards are in there. SCSI
On July 4, 2003 01:55 pm, daniel wrote:
oops, i forgot one step:
# mkdir directory
# chown nobody.users directory
# chmod 4775 directory
# exit
$ touch directory/asdf
$ ls -l directory
-rw-r--r--1 username users 0
Jul 4
Hello again.
I got mplayer working (the xmms bug the mplayer emerge was dying on is fixed
now, thanks J.E. and Bugzilla!)
MPlayer is working just perfectly for MPEG and Quicktime movies, but for
real audio it's just crapping out horribly. I have an old .RA file on
my hard drive, and it plays
`rsync -rlopg --progress --exclude=3D/dev --exclude=3D/mnt/newdrve /=20
/mnt/newdrive` would be how I would do it. That command will preserve=20
permissions.
Thanks for the suggestion. Someone else suggested I boot from the
install CD, so I combined your suggestions and was pleasantly
On Friday 04 Jul 2003 21:09, Zack Gilburd wrote:
`rsync -rlopg --progress --exclude=/dev --exclude=/mnt/newdrve /
/mnt/newdrive` would be how I would do it. That command will
preserve permissions.
There's no need to exclude /dev. rsync transfers its contents intact.
Peter
--
On Friday 04 Jul 2003 21:22, D.J. Bolderman wrote:
On do, 03 jul 2003, Norberto BENSA wrote:
BTW, there's an ebuild: emerge privoxy :-)
Yup I know :) I'm running it together with Squid on my (Debian)
server. However, it seems that this combination slows down my
connection... Running each
On Fri, 2003-07-04 at 18:22, Jamie Dobbs wrote:
The current version of lm-sensors (2.7.0-r1) can't be emerged with the
current kernel (from gentoo-sources). I get the following error:
!! ERROR: sys-apps/lm-sensors-2.7.0-r1 failed.
!!! Function src_compile, Line 45, Exitcode 2
!!! lm_sensors
On Fri, 2003-07-04 at 17:02, Gëzim Hoxha wrote:
try to do chown -R nobody.users direcotry
Thats a one time fix. He's looking for something that applies to new
things as well. Too bad you can't tell nfs to squash rights.
--
Christopher
In 1968 it took the computing power of 2 C-64's to fly a
Someone ( I forgot who) said that privoxy is too good
for them, I happen to feel the same way. So if you're
that someone please let me know what do you use now?
If not tell me some app easier to use than privoxy and
after all, I don't need all the features it has, I
only want to kill banner adds
On Friday 04 July 2003 14:21, Ulrich Plate wrote:
snip
radeon_drv.c In file included from radeon_drv.c:47:
drm_drv.h: In function `drm_init':
drm_drv.h:622: warning: implicit declaration of function
`mtrr_add_Rsmp_56179c5f' drm_drv.h:624: `MTRR_TYPE_WRCOMB' undeclared
(first use in this
On 04 Jul 2003 15:59:53 -0300 Alcino Dall Igna Junior wrote:
On Mon, 2003-06-30 at 16:10, Marius Mauch wrote:
SRC_URI is the location where the source is guaranteed to be found.
portage tries the mirrors first to reduce load on the original site,
if the sources are not found on the
85 matches
Mail list logo