Hi all,
I have a radeon 7200 series (r100). I configured X to run with DRI and
now I want enable framebuffer.
I built the module radeonfb.o, fbcon-cfb32, fbcon-cfb24, fbcon-cfb8 and
loaded. I activated the Option UseFbDev true in the device section.
I enabled also AGPFastWrite true.
In
Hi all,
I compiled 2.6.1 kernel on my gentoo distr and the behavior of my PS/2
mouse is changed.
It seems to be too sensitive and then unusable.
This will happen both in text mode (using gpm) and X. The mouse works
fine in 2.4.
I read from the linux mail list archive that this is not a new
kvm?
I do not know you mean?
Alex Nelson wrote:
Arne Vogel wrote:
Koala Gnu wrote:
Hi all,
I compiled 2.6.1 kernel on my gentoo distr and the behavior of my
PS/2 mouse is changed.
It seems to be too sensitive and then unusable.
This will happen both in text mode (using
Hi all,
I emerged vsftp. I changed in /etc/xinet.d/vsftpd the disable parameter
from yes to no. Then I restarted the xinetd service, but when I connect
remotly I get the following message:
Connected to sasadangelo (146.84.177.41).
421 Service not available, remote server has closed connection
make.conf and check if the steps below are correct?
Thanks again.
Bye
Koala Gnu wrote:
Hi all,
I have installed gentoo starting from stage1, I have executed the
following steps:
1. start with Live CD on a system already partitioned. Gentoo
partition is 2 Gb (/dev/hda9).
2. format it using reiser fs
3
Hi all,
I have installed gentoo starting from stage1, I have executed the
following steps:
1. start with Live CD on a system already partitioned. Gentoo partition
is 2 Gb (/dev/hda9).
2. format it using reiser fs
3. use a swap partition already present into the system (/dev/hda5)
4. swapon
/texinfo-4.5/image/usr/share/man/man1/texindex.1
open_wr: /va/tmp/portage/texinfo-4.5/image/usr/share/man/man1/texi2dvi.1
Calculating dependencies ...done!
emerge (1 of 3) sys-apps/texinfo-4.5 to /
Koala Gnu wrote
Hi,
I use all the tool reported in the thread: vim (It's my favourite),
emacs, eclipse ... but also source navigator (it is very light and has
good cross referencing).
If you like DEVC++ for windows probably eclipse is your tool.
Jakub Krajcovic wrote:
Hi guys,
I need some recommendation
Hi all,
I tried to install 4 times gentoo on my workstation having Mandrake 9.0.
My computer is a Pentium 4 IBM Netvista.
I used a 2 Gb partition for gentoo and I followed all the steps of the
italian gentoo guide at
www.gentoo.it.
I run /scripts/bootstrap.sh and I got the following error. I
I forgot to mention that the first three installation had pentium4 as
cpu arch, but the error was the same. So I do not think this is the
solution.
Bruce Munro wrote:
On Tue, 2004-01-20 at 09:59, Koala Gnu wrote:
Hi all,
I tried to install 4 times gentoo on my workstation having Mandrake
+0100, Koala Gnu [EMAIL PROTECTED]
wrote:
I forgot to mention that the first three installation had pentium4 as
cpu arch, but the error was the same. So I do not think this is the
solution.
Bruce Munro wrote:
On Tue, 2004-01-20 at 09:59, Koala Gnu wrote:
Hi all,
I tried to install 4 times
To restart the build process, should I some directories or I can give
directly the
scripts/bootstrap.sh command?
Thanks for you comments.
Bye
Norbert Kamenicky wrote:
This works on P4 excellent:
CFLAGS=-march=pentium4 -O2 -mfpmath=sse -msse2 -mmmx -pipe
CXXFLAGS=${CFLAGS}
noro
--
[EMAIL
sorry for my english
To restart the build process, should I clean some directories or I can
give directly the
scripts/bootstrap.sh command?
Koala Gnu wrote:
To restart the build process, should I some directories or I can give
directly the
scripts/bootstrap.sh command?
Thanks for you
Thomas T. Veldhouse wrote:
Koala Gnu wrote:
sorry for my english
To restart the build process, should I clean some directories or I
can give directly the
scripts/bootstrap.sh command?
Restart from what point? Is this a fully installed machine that you are
just trying to rebuild
message)
Koala Gnu wrote:
Hi all,
I tried to install 4 times gentoo on my workstation having Mandrake 9.0.
My computer is a Pentium 4 IBM Netvista.
I used a 2 Gb partition for gentoo and I followed all the steps of the
italian gentoo guide at
www.gentoo.it.
I run /scripts/bootstrap.sh and I got
I wak taking about
MAKEOPTS=-j2
looking at the message error seems that -j2 and -C generate problems
when used together.
Michael Gruetzner wrote:
Hi again,
your cflags look fine I don't belive that they are causing the error.
MfG
Michael
On Tue, 20 Jan 2004 13:44:31 +0100, Koala Gnu [EMAIL
I tried commenting -j2 but still not work. At this point I try the Live
CD approach.
Koala Gnu wrote:
I wak taking about
MAKEOPTS=-j2
looking at the message error seems that -j2 and -C generate problems
when used together.
Michael Gruetzner wrote:
Hi again,
your cflags look fine I don't
Hi
I was reading the thread regarding the amount of space necessary to
install gentoo. I have a Mandrake distribution and I created a new
partition on /dev/hda9 on which I want to install a minimal distribution
of gentoo (base system + xfree + enlightement).
This partition is of 2 Gb. Is this
Jason Stubbs wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I should read better before answering.
On Monday 19 January 2004 19:51, Koala Gnu wrote:
The steps I executed are:
format the /dev/hda9 using ext3 journaled
mount it on /mnt/gentoo
download stage1 tar
untar it on /mnt/gentoo
,
can please send the link of the mirror containing the tars used.
Thanks again
PS
I am very frustrated ... I built the bootstrap phase three times and
every time I got the same problem.
Koala Gnu wrote:
Jason Stubbs wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I should read better
Jason Stubbs wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 19 January 2004 21:16, Koala Gnu wrote:
If the procedure below reported is correct, please can someone of you
where I can get portage.tar and stage1.tar that work correctly.
I tried the tars 14 and 15
A question: if I untar stage1 and in /mnt/gentoo/usr I untar portage
downloaded from a mirror and I do not want perform any emerge sync, Do I
need to set the PORTDIR_OVERLAY variable to /usr/portage?
Andrej Kacian wrote:
On Mon, 19 Jan 2004 12:09:16 +
Jon Lawrence [EMAIL PROTECTED] wrote:
Hi all,
I am trying to install gentoo starting from stage1. I executed all the
steps successfully and I launche scripts/bootstrapt.sh to start building
the system.
I got the following build error:
i [ /var/tmp/portage/biinutils-2.14.90.0.6-r6/image//usr/bin/$n !=
23 matches
Mail list logo