On Saturday, 23 August 2003, at 11:42 pm, Terje Kvernes wrote:
I've been running ~x86 on three boxes for a couple of months now,
with the latest and greatest. things work surprisingly well, with
some tidbits here and there requiring testes...
I think you're saying it takes balls to run
At 23 August, 2003 Mark Huson wrote:
I recently switched a harddrive that i use to hold data from one gentoo comp
to another. When i try to mount the harddrive though it gives the standard
mount error. I then tried to check the partitions and when i try to start
cfdisk i get no partition
Stroller [EMAIL PROTECTED] writes:
On Saturday, 23 August 2003, at 11:42 pm, Terje Kvernes wrote:
I've been running ~x86 on three boxes for a couple of months now,
with the latest and greatest. things work surprisingly well, with
some tidbits here and there requiring testes...
I
On Sunday 24 August 2003 12:15 am, Andrew Farmer wrote:
At 23 August, 2003 Mark Huson wrote:
I recently switched a harddrive that i use to hold data from one gentoo
comp to another. When i try to mount the harddrive though it gives the
standard mount error. I then tried to check the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 23 August 2003 21:55, Simon Mushi wrote:
Hi people,
Wow, I can't believe it...after upgrading portage just today...I realized
that it removed itself after I the upgrade.
when I try to run emerge i get: -bash: emerge: command not
Thanks Mike,
Good to know that there may be hope...will try it out Sunday
morning... saturday night is not for trying to do something like this.
BEst
SImon
On Sun, 24 Aug 2003, Mike Williams wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday 23 August 2003 21:55, Simon
Hey all,
Is there anyone out there who uses the new subversion ebuilds in portage?
I've used subversion heavily since November, but I never used the
gentoo-provided ebuilds because they were so out of date, and Berkeley 4.0.14
seemed to do weird stuff whenever I tried to emerge it.
On my
On Aug 23, 2003 [00:39] -0400, Chris Black [EMAIL PROTECTED] wrote:
Andrusky [EMAIL PROTECTED] wrote:
Does anyone else have problems with gtk2 and mplayer. When compiled with gtk
I can right click anywhere on the movie window and get a menu. When compiled
with gtk2 I can't get the menu. On
Tom Eastman wrote:
Hey all,
Is there anyone out there who uses the new subversion ebuilds in portage?
I've built it from the ebuilds, and it seems to work but I admit I
haven't actually committed anything yet :)
My only complaint with the ebuild is that it seems to assume all network
access
I get the following message whenever i use emerge (emerge sync, emerge -upv
world...etc). Emerge last worked about 4 hours ago when I emerged mutt,
fetchmail and procmail. Then...
emerge sync
Performing Global Updates: /usr/portage/profiles/updates/3Q-2003
(Could take a couple minutes if
Hello gentooers!
A short question: Is it safe to wipe out contents of /var/tmp/portage
directory?
Quick searching in docs didnt give me an answer (perhaps that's because I'm
too sleepy now).
Thanks in advance for answers.
Dmitry.
--
WinErr: 678 This was the last level in Windows. Do you
On Sunday 24 August 2003 02:56 am, Dmitry Suzdalev wrote:
Hello gentooers!
A short question: Is it safe to wipe out contents of /var/tmp/portage
directory?
Quick searching in docs didnt give me an answer (perhaps that's because I'm
too sleepy now).
Thanks in advance for answers.
Dmitry.
On 03:02 Sun 24 Aug, Lloyd I Freese Jr wrote:
On Sunday 24 August 2003 02:56 am, Dmitry Suzdalev wrote:
Hello gentooers!
A short question: Is it safe to wipe out contents of /var/tmp/portage
directory?
Quick searching in docs didnt give me an answer (perhaps that's because I'm
is it possible that your cd drive is running as a slave to the hdd ?
kind regards
anupam
Scharf Yuval [EMAIL PROTECTED] writes:
Hello,
1. It has nothing to do with another mm application because It also
happeneds when I use cdplay in the console (before starting X).
2. When Steve asked me
On Sun, 2003-08-24 at 17:34, Scott Jones wrote:
On 03:02 Sun 24 Aug, Lloyd I Freese Jr wrote:
On Sunday 24 August 2003 02:56 am, Dmitry Suzdalev wrote:
Hello gentooers!
A short question: Is it safe to wipe out contents of /var/tmp/portage
directory?
Quick searching in docs
Thanks guys, I think I'll try it.
If I'll end up with some errors -- I can always count on our greatest gentoo
community ;).
Dmitry.
On Sunday 24 August 2003 11:34, Scott Jones wrote:
Don't really know if it's offically okay but I've done it before without
anything blowing up. YMMV though
On Sat, 23 Aug 2003 21:08:24 -0600
Andrusky [EMAIL PROTECTED] wrote:
On Aug 23, 2003 [00:39] -0400, Chris Black [EMAIL PROTECTED]
wrote:
Andrusky [EMAIL PROTECTED] wrote:
Does anyone else have problems with gtk2 and mplayer. When
compiled with gtk I can right click anywhere on the movie
Hi,
This issue is not strictly gentoo-related, but I hope someone has
encountered it in the past and can help me.
I've recently bought an audigy2 card. I had no idea that it could be
unsupported -- after all, the creative production is as mainstream as
could be :). However, I can't get it to
Hi Stephen,
Am Samstag, 23. August 2003 18:09 schrieb Stephen Liu:
The RAID-0 box is for test purpose. The RAID controller needs a
driver to run but it works for Windows only. There is no driver
for Linux therefore Redhat can't see a single drive but 2 drives
instead.
I have a Promise and
On Sunday 24 August 2003 01:45 am, Leonid Podolny wrote:
Hi,
This issue is not strictly gentoo-related, but I hope someone has
encountered it in the past and can help me.
I've recently bought an audigy2 card. I had no idea that it could be
unsupported -- after all, the creative production is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 24 August 2003 07:56, Dmitry Suzdalev wrote:
Hello gentooers!
A short question: Is it safe to wipe out contents of /var/tmp/portage
directory?
Quick searching in docs didnt give me an answer (perhaps that's because I'm
too sleepy
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 24 August 2003 05:28, David wrote:
I get the following message whenever i use emerge (emerge sync, emerge -upv
world...etc). Emerge last worked about 4 hours ago when I emerged mutt,
fetchmail and procmail. Then...
[snip errors]
Woah,
Hi all.
I wanted to save a image in tiff format.
The file format is not supported, neither is gif.
How do I get this working?
Is this some non-free stuff?
Kenneth
--
[EMAIL PROTECTED] mailing list
On Sun, 2003-08-24 at 03:14, Mark Huson wrote:
I recently switched a harddrive that i use to hold data from one gentoo comp
to another. When i try to mount the harddrive though it gives the standard
mount error. I then tried to check the partitions and when i try to start
cfdisk i get no
Hi!
On Sunday 24 August 2003 13:28, Kenneth Macdonald Karlsen wrote:
Hi all.
I wanted to save a image in tiff format.
The file format is not supported, neither is gif.
How do I get this working?
Is this some non-free stuff?
I believe gif was non-free, but it's free now. Anyway, my gimp
Hi,
I have a laptop, and each place i come has different setting for DHCP, wireless, mount
points and so on.
Is it possible at boot time to choose where i am, and so activate thoose settings.
I was thinking of several entries in my grub.conf and add something like this.
kernel
Hi,
How can i enable that if I press the power off button on my computer it shut
down?
ACPI and APM have i enabled in the kernel and it works!
Thanx,
jan
--
[EMAIL PROTECTED] mailing list
On Thu, 2003-08-21 at 05:42, Jorge Almeida wrote:
Has anyone managed to get audacity-1.1.3 working? I emerged it with
USE=-gtk2 and it compiles, but it spills out error messages on opening.
I searched the foruns and someone had the same problem
Ever since I emerged mozilla 1.4 the mail component has stopped working.
I cannot send or receive messages. I am sending this from my debian sarge.
Are bothe users the same ID ?
Dit it work before ?
The debian mozilla package is version Mozilla Debian Package
did this so that whichever OS is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have it setup that KDE displays when a CDROM is mounted. It works
fine, but the title of the icon is long and unneccessary.
CD-ROM (cdrom1) mounted at /mnt/auto/cdrw
I would rather have 'CD-ROM (cdrom1)'
Does anyone know how to change this?
-
On August 24, 2003 02:54 am, Kurt V. Hindenburg wrote:
I have it setup that KDE displays when a CDROM is mounted. It works
fine, but the title of the icon is long and unneccessary.
CD-ROM (cdrom1) mounted at /mnt/auto/cdrw
I would rather have 'CD-ROM (cdrom1)'
Does anyone know how to
hi gentoo-user,
mal ne blöde frage.
wenn ich in /usr/linux ein make config ausführe, WO also in welcher
datei ist diese konfiguration dann gespeichert? (um sie von system a
zu system b zu kopieren.)
danke!
gruss
/Christian mailto:[EMAIL PROTECTED]
---
I propose that the
On Sunday 24 August 2003 02:55 am, Mike Williams wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 24 August 2003 05:28, David wrote:
I get the following message whenever i use emerge (emerge sync, emerge
-upv world...etc). Emerge last worked about 4 hours ago when I emerged
On Sun, 24 Aug 2003 06:08:22 -0700
el lodger [EMAIL PROTECTED] wrote:
After upgrading to portage-2.0.49 I ran etc-update and then tried to
edit make.conf with nano. Nano produced some blinking blocks of text
that said something like painting line 1 new line is. This is not
verbatim as I
i'm looking to move my existing gentoo install from a 3 gig hd to an 80 gig
hd.
i'm thinking i'll format the 80 gig (/dev/hdb) as 64 meg /boot (/dev/hdb1)
2 gig swap (/dev/hdb2)
and the rest for / (/dev/hdb3)
then i'll mount the /dev/hdb3 in /mnt/new and /dev/hdb1 as /mnt/new/boot
and then cp
It should work fine. I did that a couple of weeks ago and all was good.
On Mon, 25 Aug 2003, Adam Dunstan wrote:
i'm looking to move my existing gentoo install from a 3 gig hd to an 80 gig
hd.
i'm thinking i'll format the 80 gig (/dev/hdb) as 64 meg /boot (/dev/hdb1)
2 gig swap
Thomas Stoddard wrote:
Ever since I emerged mozilla 1.4 the mail component has stopped working.
I cannot send or receive messages. I am sending this from my debian sarge.
Are there any errors? I had a problem, that an error message occured
when I clicked on 'compose' or 'reply' which said, that
On Sunday 24 August 2003 05:29, Patrick Marquetecken carved in
granite:
I have a laptop, and each place i come has different
setting for DHCP, wireless, mount points and so on.
Is it possible at boot time to choose where i am, and so
activate thoose settings. I was thinking of several
will i have to do something with lilo aswell?
--
[EMAIL PROTECTED] mailing list
On Mon, Aug 25, 2003 at 01:04:47AM +1000, Adam Dunstan wrote:
i'm looking to move my existing gentoo install from a 3 gig hd to an 80 gig
hd.
i'm thinking i'll format the 80 gig (/dev/hdb) as 64 meg /boot (/dev/hdb1)
2 gig swap (/dev/hdb2)
and the rest for / (/dev/hdb3)
then i'll mount
On Sunday 24 August 2003 08:04, Adam Dunstan carved in
granite:
i'm looking to move my existing gentoo install from a 3 gig
hd to an 80 gig hd.
i'm thinking i'll format the 80 gig (/dev/hdb) as 64 meg
/boot (/dev/hdb1) 2 gig swap (/dev/hdb2)
and the rest for / (/dev/hdb3)
then i'll mount
Hi Adam,
Parted will do it for you in less than 15 minutes. I did it once on
another distro. It is quite convenient and smooth. Please visit
following website for further information;
http://www.icewalkers.com/Linux/Software/56140/GNU-Parted.html
B.R.
Stephen Liu
On Sun, 2003-08-24 at
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
will i have to do something with lilo aswell?
nothing more than last time you installed lilo
PS: /boot sometimes needs to be bootable...
- --
0x87D205F6 hkp://pgp.mit.edu #198379 http://counter.li.org
You can't prove it won't happen...
Hi!
On Sunday 24 August 2003 16:32, Christian Schäfer wrote:
hi gentoo-user,
mal ne blöde frage.
wenn ich in /usr/linux ein make config ausführe, WO also in welcher
datei ist diese konfiguration dann gespeichert? (um sie von system a
zu system b zu kopieren.)
Ich will nicht irgendwie
should I copy my /tmp directory over aswell?
--
[EMAIL PROTECTED] mailing list
On Sun, 24 Aug 2003 16:32:01 +0200
Christian Schäfer [EMAIL PROTECTED] wrote:
hi gentoo-user,
mal ne blöde frage.
wenn ich in /usr/linux ein make config ausführe, WO also in welcher
datei ist diese konfiguration dann gespeichert? (um sie von system a
zu system b zu kopieren.)
danke!
On Sunday 24 August 2003 07:33 am, David wrote:
On Sunday 24 August 2003 02:55 am, Mike Williams wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 24 August 2003 05:28, David wrote:
I get the following message whenever i use emerge (emerge sync, emerge
-upv
ok, I emerge gentoolkit and then I run:
revdep-rebuild, but it errors with this message:
make: *** [ext/iconv/iconv.lo] Error 1
make: *** Waiting for unfinished jobs
!!! ERROR: dev-php/mod_php-4.3.2 failed.
!!! Function php_src_compile, Line 402, Exitcode 2
!!! compile problem
Result is not
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
should I copy my /tmp directory over aswell?
You don't have to, no.
- --
0x87D205F6 hkp://pgp.mit.edu #198379 http://counter.li.org
You can't prove it won't happen...
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.2 (GNU/Linux)
After much frustration I finally found where the beast was hiding.
It looks like make is not working correctly if you have CDPATH set.
Unsetting CDPATH fixed the problem for me.
There is also a bug report:
[url]http://bugs.gentoo.org/show_bug.cgi?id=14103[/url]
Rgds,
Markus
On Sunday 17
hi Collins,
Gar keine bloede Frage, aber auf Englisch, bitte!
sorry, mixed up with the other mailing list Im in...
gruss
/Christian mailto:[EMAIL PROTECTED]
---
I propose that the following character sequence for joke markers:
:-)
19-Sep-82
On Sun, 24 Aug 2003 23:02:38 +0400
Makurin Roman [EMAIL PROTECTED] wrote:
24.08.2003, × 19:04, Adam Dunstan :
i'm looking to move my existing gentoo install from a 3 gig hd to an
80 gig hd.
i'm thinking i'll format the 80 gig (/dev/hdb) as 64 meg /boot
(/dev/hdb1) 2 gig swap
Renat Golubchyk wrote:
Hi!
On Sunday 24 August 2003 13:28, Kenneth Macdonald Karlsen wrote:
Hi all.
I wanted to save a image in tiff format.
The file format is not supported, neither is gif.
How do I get this working?
Is this some non-free stuff?
I believe gif was non-free, but it's free now.
Ever since I emerged mozilla 1.4 the mail component has stopped
working. I cannot send or receive messages. I am sending this from my
debian sarge.
Are bothe users the same ID ?
Dit it work before ?
The debian mozilla package is version Mozilla Debian Package
did this so that whichever
I have downloaded some copies of some old time Radio Mystery Theater
stuff from various places around the Net. However, each and every one of
the mp3s are playing far too fast. They all sound like a bunch of
chipmunks reading a story :)
I have tried using xmms and mp3blaster, and they both have
On Sun, 24 Aug 2003, Mark Knecht wrote:
On Thu, 2003-08-21 at 05:42, Jorge Almeida wrote:
Has anyone managed to get audacity-1.1.3 working? I emerged it with
USE=-gtk2 and it compiles, but it spills out error messages on opening.
I searched the foruns and someone had the same problem
On Sunday 24 August 2003 21:42, Matthew Daubenspeck wrote:
I have downloaded some copies of some old time Radio Mystery Theater
stuff from various places around the Net. However, each and every one of
the mp3s are playing far too fast. They all sound like a bunch of
chipmunks reading a story
Jan Meier wrote:
Hi,
How can i enable that if I press the power off button on my computer it shut
down?
ACPI and APM have i enabled in the kernel and it works!
Thanx,
jan
Just install sys-apps/acpid
--
[EMAIL PROTECTED] mailing list
Hi,
for app. 2 days emerge -pU world wants to downgrade opera:
energy root # emerge -puU world
These are the packages that I would merge, in order:
Calculating world dependencies ...done!
[ebuild UD] net-www/opera-6.12 [7.11]
höh?
Why? Is there any plausible reason to downgrade? 7.11 is
On Sun, 24 Aug 2003 23:15:10 +
Hemmann, Volker Armin [EMAIL PROTECTED] wrote:
Hi,
for app. 2 days emerge -pU world wants to downgrade opera:
energy root # emerge -puU world
These are the packages that I would merge, in order:
Calculating world dependencies ...done!
[ebuild
Anyone on this list gone to Europe w/ a laptop? Going to Italy and
France. I have an IBM T30. I know I'll need a plug adapter, but don't
know if I need a voltage converter. I don't think so, but thought I
better check. And, if anyone's used an internet cafe in Paris or
Rome, charges?
On Sun, 2003-08-24 at 13:59, Jorge Almeida wrote:
Thank you, Mark. I just found out that audacity doesn't like aRts. It is in
http://audacity.sourceforge.net/unix.php at the end of the page (don't know how I
didn't see it before...). Still no help system, though.
Jorge,
If you'd like to
I used dvd::rip to rip a DVD. It split it into the audio and video
streams. When it used transcode to combine them, the audio was out of
sync with the video. I opened the audio stream (.mpa) in xmms. It said
it was 149:23. How can I determine the length of the video stream
(.m1v)? And once
On Sun, 2003-08-24 at 15:13, Andrew Gaffney wrote:
I used dvd::rip to rip a DVD. It split it into the audio and video
streams. When it used transcode to combine them, the audio was out of
sync with the video. I opened the audio stream (.mpa) in xmms. It said
it was 149:23. How can I
Mark Knecht wrote:
On Sun, 2003-08-24 at 15:13, Andrew Gaffney wrote:
I used dvd::rip to rip a DVD. It split it into the audio and video
streams. When it used transcode to combine them, the audio was out of
sync with the video. I opened the audio stream (.mpa) in xmms. It said
it was 149:23.
On Sun, 24 Aug 2003, Mark Knecht wrote:
On Sun, 2003-08-24 at 13:59, Jorge Almeida wrote:
Thank you, Mark. I just found out that audacity doesn't like aRts. It is in
http://audacity.sourceforge.net/unix.php at the end of the page (don't know how I
didn't see it before...). Still no help
66 matches
Mail list logo