(Forwarded on, I missed -user first time around, sorry)
---BeginMessage---
Hi list(s),
As of now, the fruits of our labour in the GNOME team are available in
the form of GNOME 2.4, marked stable on x86. New GNOME users should have
no problem acquiring the GNOME Desktop with the command 'emerge
And once again, Hi!
I discovered a workaround for the adsl-problem without the need for pci=noacpi
or acpi=off.
When I enable APIC under processor type and feauters everything works and
there is no need for pci=noacpi. If I use an APIC-enabled kernel plus the
pci=noacpi option passed to my
On Monday 06 October 2003 16:09, momesana wrote:
And once again, Hi!
I discovered a workaround for the adsl-problem without the need for
pci=noacpi or acpi=off.
When I enable APIC under processor type and feauters everything works and
there is no need for pci=noacpi. If I use an APIC-enabled
I'm trying to find out if anyone is actually using the prozilla download excellerator
for emerging
files.
Very little on Google and on the Gentoo Forums.
Wen't to Prozilla's site and checked out their list Archives and it's scarry to say
the least. It
almost looks as if the their list server
Hi all,
I have just tried to update world and have the following errors:-
These are the packages that I would merge, in order:
Calculating world dependencies /
!!! all ebuilds that could satisfy =x11-base/xfree-4.3.0-r3 have been
masked.
!!!(dependency required by x11-libs/gtk+-2.2.4-r1
-Original Message-
From: Joshua Banks [mailto:[EMAIL PROTECTED]
Sent: 06 October 2003 08:59
To: [EMAIL PROTECTED]
Subject: [gentoo-user] Does anyone use the Prozilla download
excellerator?
I'm trying to find out if anyone is actually using the
prozilla download excellerator
I use it and it works fine. I did however find that if I use it in combination with
mirrorselect it does however start to get a little flaky
finding hosts and connecting to them properly.
-Original Message-
From: Tim Golden [EMAIL PROTECTED]
Sent: Oct 6, 2003 3:56 AM
To: '[EMAIL
Thanks to all of you for answering my question about fans.
I buyed two fans one pulling air inside from the front and one blowing it
outside from the rear. And just after that, I felt really stupid when I saw
that my chipset's fan was dead. Impossible to find a 4cm fan in my town to
replace it.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 06 October 2003 02:11, Lincoln A. Baxter wrote:
The device appears to be /dev/hdc. cat /proc/ide/ide1/hdc/model shows:
cdrecord -scanbus
Cdrecord 2.01a14 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jrg
Schilling
cdrecord: No such file
Thanks for the response Tim and Heath.
Heath,
Can you tell me what settings your using for Prozilla in Make.conf and in your
Prozilla.conf so I
can compair to what I'm using. Please use my personal email address if you wish.
Thanks,
JBanks
--- Heath Miller [EMAIL PROTECTED] wrote:
I use it
Please use my personal email address if you wish.
Please don't. On a mailing list, there is always a percentage of lurkers
like myself hanging around, taking advantage of other peoples problems with
solutions.
Biker
--
[EMAIL PROTECTED] mailing list
--- Paul Stear [EMAIL PROTECTED] wrote:
Hi all,
I have just tried to update world and have the following errors:-
These are the packages that I would merge, in order:
Calculating world dependencies /
!!! all ebuilds that could satisfy =x11-base/xfree-4.3.0-r3 have been
masked.
!!!
Why haven't you sent anything yet then Gustav.
JBanks
--- [EMAIL PROTECTED] wrote:
Please use my personal email address if you wish.
Please don't. On a mailing list, there is always a percentage of lurkers
like myself hanging around, taking advantage of other peoples problems with
mathieu wrote:
I know that I've to find a better solution than having a fan standing
on my videocard, but until then, it'll do like that.
http://www.zalman.co.kr/english/product/nb32j.htm
http://www.zalman.co.kr/english/product/zm-nb47j.htm
Rick
Kitty5 NewMedia http://Kitty5.com
POV-Ray News
Because I'm *considering* to try out Prozilla. As such, I'm interested in
other peoples experiences. Positive as well as negative.
So far, I haven't had anything reasonably useful to add to the discussion
and I didn't want to send a Me too msg.
Biker, still lurking. ;-)
here's how i got the max resolutions on my monitors:
comment out the Modes line in 'Section Screen' so you have something
like this:
Section Screen
Identifier Screen[Tri-Tib]
Device Device[Trident]
Monitor Monitor[Tiburon]
DefaultDepth16
Le Lundi 6 Octobre 2003 12:08, Rick [Kitty5] a écrit :
mathieu wrote:
I know that I've to find a better solution than having a fan standing
on my videocard, but until then, it'll do like that.
http://www.zalman.co.kr/english/product/nb32j.htm
I have recently compiled and installed the new 2.6.0-test6 linux kernel but I
recently recognized that neither the apache-server, nor the sshd work
properly any longer. I can establish outbound ssh connections but inbound
connections are not possible no more. Do anybody know the reasons for
Hello
After my troubles with mailman I wanted to ask what other mailing list
software I can use. It does not matter whether it has a web interface
or not but it must be compatible with courier-imap and postfix which is
what the server runs. Any suggestions and your experiences with various
I tried getting off my backside, plugging a keyboard into the offending
machine and pressing the numlock key - didn't help :|
Rick
Kitty5 NewMedia http://Kitty5.com
POV-Ray News Resources http://Povray.co.uk
TEL : +44 (01270) 501101 - ICQ : 15776037
PGP Public Key
Hi gentooers
i'm looking for the source of the Gentoo G or for a detailled
specification to design some wallpapers
cause my self-designed G logo looks like it had a frontal crash with a
roadtrain at 250 km/h... ;-)
Doesn't matter in whitch format (preferred: PovRay)
Hope somebody can help me.
I tried to help her: patched my kernel for hfs+ support, emerged hfsutils and
hfsplusutils, compiled apple partitions support and then didn't know what to
do: disks answer to hdparm, fdisk doesn't see anything, diskdrake (from my
mandrake partition) sees a lot of partitions (13 If i remember),
the only way i can achieve positive effect printing non-ascii is
TestPage from Cups www-interface. None of AbiWord, Ggv, Gimp works.
Do you have ppd and cups in your USE line. If you don't have ppd, gimp-print
will not make the ppd files needed. So if you don't, set ppd in use line and
rebuild
I tried to help her: patched my kernel for hfs+ support, emerged hfsutils and
hfsplusutils, compiled apple partitions support and then didn't know what to
do: disks answer to hdparm, fdisk doesn't see anything, diskdrake (from my
mandrake partition) sees a lot of partitions (13 If i remember),
i guess that the easiest way ot recover your data is to invent a time-machine,
go back in the past and make backups
i can't solve your problem, but if it's of any help, i've seen something like
that many years ago on a PC with a wierd, low-cost, M/B.
IMHO, and it's really humble, it's a
Hi,
There is no written law that disallows you from using ezmlm. ezmlm
just requires that your mta delivers mails to aliases specified with
userid-alias@lists. As far as I understand it, postfix supports
this and postfix also supports userid+alias@lists as well as a
number of other means.
On Thu, 2 Oct 2003, Martin Gramatke wrote:
# quickhack, don't know where else to do this
right behind the line
ebegin Bringing ${IFACE} up
into my /etc/init.d/net.eth1.
The proper place would be in /etc/pcmcia/{wireless,network}.opts AND
apparently in the corresponding
Hi all,
Just compiled the new Gnome desktop, looks great, but now I have
problems accessing my LDAP directory. Already re-compiled Evolution, but
still this:
First query works, on second query, Evolution crashes. (need to do
$evolution --force-shutdown)
Is this an Evolution issue or a Gentoo
Has anyone successfully compiled OpenOffice 1.1 with GCC 3.3? I know
there is that check in the ebuild for 3.2, but I copied it to the
overlay dir and removed that check. I'm currently compiling with
3.3.1-r4. I'm just trying to get an idea of whether or not I'm wasting
my time. I have an
On Saturday 04 October 2003 08:18 pm, Steve wrote:
At 12:49 AM 10/4/03 , Leendert van den Berg wrote and said this:
Can you change to VT1? ctrl+ alt+ F1?n If so, but not to other
terminals X is starting before the VT's are spawned. Not sure
how to check for that though
I can not
hi there,
i got the following problem:
once these days my vmware started, but the vm was hanging, so i had to kill the vmware
process. but now, after killing it, the vmmon module doesnt get free to unload it. i
think it hanged because the modules had to be recompiled for my new kernel. so it
On Mon, 6 Oct 2003, mathieu wrote:
I hope I'll have a price for off-topic questions but you guys seem to know
everything about anything so I'll give it a try.
A while ago I asked a question about some hds problems. Now I blame it on my
mb's chipset overheating.
Satruday, the two hds of my
emerge iptables
HvR wrote:
i wanted to set up shorewall firewall but noticed that i dont have the
iptables module compiled in my gentoo-sources kernel, what do i turn
on in the kernel config to make it compile it?
i have tried a bunch of stuff but either it still doesnt compile or
the
On Mon, 2003-10-06 at 08:51, HvR wrote:
i wanted to set up shorewall firewall but noticed that i dont have the
iptables module compiled in my gentoo-sources kernel, what do i turn
on in the kernel config to make it compile it?
i have tried a bunch of stuff but either it still doesnt compile
On 2003.10.06 03:07, Jason Stubbs wrote:
On Monday 06 October 2003 16:09, momesana wrote:
And once again, Hi!
I discovered a workaround for the adsl-problem without the need for
pci=noacpi or acpi=off.
When I enable APIC under processor type and feauters everything
works and
there is no need
http://www.gentoo.org/dyn/pkgs/net-firewall/iptables.xml
Prabhat Gupta wrote:
emerge iptables
HvR wrote:
i wanted to set up shorewall firewall but noticed that i dont have
the iptables module compiled in my gentoo-sources kernel, what do i
turn on in the kernel config to make it compile
i did that but it doesnt give me the kernel module i need just the userland tools
On Mon, 2003-10-06 at 08:40, Prabhat Gupta wrote:
emerge iptables
HvR wrote:
i wanted to set up shorewall firewall but noticed that i dont have the
iptables module compiled in my gentoo-sources kernel,
gabriel wrote:
On Mon, 2003-10-06 at 11:07, Andrew Gaffney wrote:
Has anyone successfully compiled OpenOffice 1.1 with GCC 3.3? I know
there is that check in the ebuild for 3.2, but I copied it to the
overlay dir and removed that check. I'm currently compiling with
3.3.1-r4. I'm just trying to
On Monday 06 Oct 2003 17:38, Andrew Gaffney wrote:
LITTLEENDIAN (Intel, VAX, PowerPC)
Stack waechst nach unten
STACKALIGNMENT : 1
can not read address (nil)
Segmentation fault
dmake: Error code 139, while making
'../../unxlngi4.pro/inc/svconf.h' dmake:
'../../unxlngi4.pro/inc/svconf.h'
Peter Ruskin wrote:
On Monday 06 Oct 2003 17:38, Andrew Gaffney wrote:
LITTLEENDIAN (Intel, VAX, PowerPC)
Stack waechst nach unten
STACKALIGNMENT : 1
can not read address (nil)
Segmentation fault
dmake: Error code 139, while making
'../../unxlngi4.pro/inc/svconf.h' dmake:
Glad to hear I' m not alone. Hope this will get solved soon though. I
have about 20 people doing their every day work on Gentoo boxes, and
they all need to access our LDAP directory.
So no upgrade to gnome 2.4 for us until this gets fixed. Any idea where
I could report this bug?
On Mon,
On Mon, 06 Oct 2003 10:07:28 -0500
Andrew Gaffney [EMAIL PROTECTED] wrote:
Has anyone successfully compiled OpenOffice 1.1 with GCC 3.3? I know
there is that check in the ebuild for 3.2, but I copied it to the
overlay dir and removed that check. I'm currently compiling with
3.3.1-r4. I'm
Hi,
On Monday 06 October 2003 07:58, Joshua Banks wrote:
I'm trying to find out if anyone is actually using the prozilla download
excellerator for emerging files.
Very little on Google and on the Gentoo Forums.
I used it for some time. For larger files it is ok and indeed speeds up
Paulo da Silva wrote:
Paul Varner wrote:
Paulo,
In /etc/make.conf is the variable PORTDIR_OVERLAY=/usr/local/portage
uncommented?
Of course. As I said, I have a few working personal ebuilds in that dir.
Only OO doesn't work there!
It worked fine for me this morning (aside from a segfault
Hi,
I have following in my local.start
kbdrate -r 30 -d 250
still, I have to give the same command (as root) everytime I boot into
KDE ( I don't have GNOME).
What can I do to fix this.
Thanks in advance!
Prabhat
--
[EMAIL PROTECTED] mailing list
that did the trick! thanks.
On Mon, 2003-10-06 at 08:55, Jon Ellis wrote:
On Mon, 2003-10-06 at 08:51, HvR wrote:
i wanted to set up shorewall firewall but noticed that i dont have the
iptables module compiled in my gentoo-sources kernel, what do i turn
on in the kernel config to make it
begin quote
On Mon, 06 Oct 2003 22:43:03 +0300
SMS WebMaster [EMAIL PROTECTED] wrote:
Hi
I have gentoo in my computer with very slow connection and I want to
upgrade my box (emerge -kU world)
right now I want to get the upgrade pacgae URLs to be able to download
them from another
emerge -kUfp world ?
Le Lundi 6 Octobre 2003 21:43, SMS WebMaster a écrit :
Hi
I have gentoo in my computer with very slow connection and I want to
upgrade my box (emerge -kU world)
right now I want to get the upgrade pacgae URLs to be able to download
them from another computer with
Hey All,
I've currently got an old Pentium box serving as an NFS, AppleTalk and
Samba file server and another old windows box set up as a print server
for a USB connected HP deskjet (the office color printer). My goal is
something like the Gallantry GW500 that we use for our web/mail server
but I
On Monday 06 October 2003 21:43, SMS WebMaster wrote:
Hi
I have gentoo in my computer with very slow connection and I want to
upgrade my box (emerge -kU world)
right now I want to get the upgrade pacgae URLs to be able to download
them from another computer with a fast connection
how can
when i run emerge -up world i shows two blocking packages:
gnome-extra/gnome-utils-2.3 (from pkg gnome-extra/gucharmap-1.0.0
and
gnome-base/bonobo-activation (from pkg gnome-base/libbonobo-2.4.0)
i can tell it is trying to update me to gnome 2.4 but how do i get rid of the blocks?
and what
On 06 Oct 2003 14:01:53 -0700
HvR [EMAIL PROTECTED] wrote:
when i run emerge -up world i shows two blocking packages:
gnome-extra/gnome-utils-2.3 (from pkg gnome-extra/gucharmap-1.0.0
and
gnome-base/bonobo-activation (from pkg gnome-base/libbonobo-2.4.0)
i can tell it is trying to update
*note* if you have seen this on the forums, I haven't gotten any replies in 24
hours so hence the repost.
I have been scouring the forums for months trying to get xfree-drm working on
a dual monitor setup (dual head ATI 7500). I have got the single monitor drm
working, but I am still wrestling
Ian writes:
On 06 Oct 2003 14:01:53 -0700
HvR [EMAIL PROTECTED] wrote:
when i run emerge -up world i shows two blocking packages:
gnome-extra/gnome-utils-2.3 (from pkg gnome-extra/gucharmap-1.0.0
and
gnome-base/bonobo-activation (from pkg gnome-base/libbonobo-2.4.0)
i can tell it is
smoother, more reliable (less crashes) and just plain nicer. Last bin
I used was 1.01 something which used to be very flaky in binary mode for
me. Does seem faster, despite the flags filter. Not definitive, I
know, but I believe I am better off with it compiled.
currently at 1.0.3 waiting for
rmmod the modules, then run vmware-config.pl
BillK
On Mon, 2003-10-06 at 23:16, a_k_b wrote:
hi there,
i got the following problem:
once these days my vmware started, but the vm was hanging, so i had to kill the
vmware process. but now, after killing it, the vmmon module doesnt get free
On Mon, Oct 06, 2003 at 06:34:17PM -0400, Matthew Vaughn wrote:
Greetings...
Out of sheer curiosity, I'd like to know what (if anything) people
use
their Gentoo boxes for with regard to distributed computing projects.
There are quite a few out there that I'm aware of, but
Hi,
I'm looking into build another machine, possibly based on the A7N
series of motherboards. Can anyone recommend one that works particularly
well with Gentoo? I'd like all the motherboard extra components (audio,
NIC, others) to be well supported in Gentoo, Alsa, etc..
Thanks in advance
Tkx, missed that.
BillK
On Tue, 2003-10-07 at 06:41, Peter Ruskin wrote:
On Monday 06 Oct 2003 23:36, William Kenworthy wrote:
currently at 1.0.3 waiting for RC5 or 1.1 to get into portage.
It is there, Bill (~x86)
Peter
--
William Kenworthy [EMAIL PROTECTED]
--
[EMAIL PROTECTED]
Anyone run into this:
make: *** [bootstrap-lean] Error 2
!!! ERROR: sys-devel/gcc-3.2.3-r2 failed.
!!! Function src_compile, Line 371, Exitcode 2
!!! (no error message)
when trying to emerge the latest stable gcc?
Updated 7/20/2003
On Mon, Oct 06, 2003 at 04:29:21PM -0700, Mark Knecht wrote:
Hi,
I'm looking into build another machine, possibly based on the A7N
series of motherboards. Can anyone recommend one that works particularly
well with Gentoo? I'd like all the motherboard extra components (audio,
NIC, others)
On Monday 06 October 2003 07:29 pm, Mark Knecht wrote:
Hi,
I'm looking into build another machine, possibly based on the
A7N series of motherboards. Can anyone recommend one that works
particularly well with Gentoo? I'd like all the motherboard extra
components (audio, NIC, others) to be
Steve writes:
Anyone run into this:
make: *** [bootstrap-lean] Error 2
!!! ERROR: sys-devel/gcc-3.2.3-r2 failed.
!!! Function src_compile, Line 371, Exitcode 2
!!! (no error message)
when trying to emerge the latest stable gcc?
Just compiled it without problems. Are there no more
Andrew Gaffney wrote:
...
It worked fine for me this morning (aside from a segfault during
compile). I did 'mkdir /usr/local/portage/app-office; cp -a
/usr/portage/app-office/openoffice /usr/local/portage/app-office' and
then modified one of the stock ebuilds.
I am sorry :-( I forgot to say
I am currently running xfree86 4.30 r2 from portage and would like to upgrade
to release 3.
What I'd like to know is, are there any additional steps I need to do after I
emerge r3 into my gentoo box? I seem to recall r3 being a test of some sort
and lost all memory of what was discussed on
On Mon, 2003-10-06 at 21:47, Jerry McBride wrote:
I am currently running xfree86 4.30 r2 from portage and would like to upgrade
to release 3.
What I'd like to know is, are there any additional steps I need to do after I
emerge r3 into my gentoo box? I seem to recall r3 being a test of some
I tried doing the samething, but it was a couple of weeks ago and with
1.1_rc4. I failed... but if you have a weekend to spend time doing other
things, then it would be a good expirament.
bryce
On Monday 06 October 2003 08:07 am, Andrew Gaffney wrote:
Has anyone successfully compiled
I have the A7N8X-X. Works great, though I don't use the built-in ethernet or
audio.
If you'd like, I can send your my kernel config file.
On Monday 06 October 2003 06:29 pm, Mark Knecht wrote:
I'm looking into build another machine, possibly based on the A7N
series of motherboards. Can
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I upgraded to xfree today with no problem. Forgot that it took that long to
compile though:)
Kevin
On Tuesday 07 October 2003 01:47 am, Jerry McBride wrote:
I am currently running xfree86 4.30 r2 from portage and would like to
upgrade to release
On Monday 06 October 2003 09:59 pm, Donnie Berkholz wrote:
On Mon, 2003-10-06 at 21:47, Jerry McBride wrote:
I am currently running xfree86 4.30 r2 from portage and would like to
upgrade to release 3.
What I'd like to know is, are there any additional steps I need to do
after I emerge
On Mon, 2003-10-06 at 22:08, Jerry McBride wrote:
On Monday 06 October 2003 09:59 pm, Donnie Berkholz wrote:
On Mon, 2003-10-06 at 21:47, Jerry McBride wrote:
I am currently running xfree86 4.30 r2 from portage and would like to
upgrade to release 3.
What I'd like to know is, are
On Tue, Oct 07, 2003 at 02:29:00AM +0200, Alex Schuster wrote:
Steve writes:
Anyone run into this:
make: *** [bootstrap-lean] Error 2
!!! ERROR: sys-devel/gcc-3.2.3-r2 failed.
!!! Function src_compile, Line 371, Exitcode 2
!!! (no error message)
when trying to emerge the
At 08:29 PM 10/6/03 , Alex Schuster wrote and said this:
Steve writes:
Anyone run into this:
make: *** [bootstrap-lean] Error 2
!!! ERROR: sys-devel/gcc-3.2.3-r2 failed.
!!! Function src_compile, Line 371, Exitcode 2
!!! (no error message)
when trying to emerge the latest stable gcc?
At 10:54 PM 10/5/03 , Jason Stubbs wrote and said this:
On Monday 06 October 2003 11:38, Steve wrote:
At 10:20 PM 10/5/03 , [EMAIL PROTECTED] wrote and said this:
On Sun, Oct 05, 2003 at 09:56:35PM -0400, Steve wrote:
I dual boot my gentoo box with Windows 98. Whenever I boot into Gentoo
At 11:09 AM 10/6/03 , Ernie Schroder wrote and said this:
On Saturday 04 October 2003 08:18 pm, Steve wrote:
At 12:49 AM 10/4/03 , Leendert van den Berg wrote and said this:
Can you change to VT1? ctrl+ alt+ F1?n If so, but not to other
terminals X is starting before the VT's are spawned.
Very strange. The config should work. Tell me, What happens if you log
on as root and then start X? Same behaviour? or does it work
properly?
The only other thing I can think of is some obscure keyswitch. I am
troubled by one of those myself. Every time I reboot this thing, my
numberpad won't
I could be wrong (and I most likely am), but I think that I
encountered the same error when installing from a stage1
tarball. I don't recall if a reboot or env-update finally
resolved the problem.
I think that the problem was going from GCC 2.95 to 3.2. I'm
also running an AMD processor
---
Hi,
I have [EMAIL PROTECTED] running, but kill it the moment I start emerging something
or play a game. That should be two hours a day the client is running,
sometimes longer
Glück Auf
Volker
--
Conclusions
In a straight-up fight, the Empire squashes the Federation like a bug. Even
with
i'm trying to set up my gigabyte nforce2 with sound. i'm using the
2.4.20-gaming kernel and have emerge nforce-audio and have placed the name
of the driver in the /etc/modules.autoload.d/kernel2.4 file. when i run
update-modules command i get the following error message:
depmod: ***
At 10:59 PM 10/6/03 , Jeff Caldwell wrote and said this:
On Tue, Oct 07, 2003 at 02:29:00AM +0200, Alex Schuster wrote:
Steve writes:
Anyone run into this:
make: *** [bootstrap-lean] Error 2
!!! ERROR: sys-devel/gcc-3.2.3-r2 failed.
!!! Function src_compile, Line 371, Exitcode 2
!!!
I suppose u need the extra storage, but why don't you convert the
windoze box to gentoo and use it as print and fileserver?
I use an old PII 300Mhz as NFS, samba (both PDC and plain fileserver)
and USB print-server (for my Epson Stylus C82), it works like a charm!
/Andreas
Matt Neimeyer wrote:
Thanks everyone for the responses. I got it working with the
hdc=ide-scsi on the kernel line in grub.conf, and then modprobe
ide-scsi.
This latest post interests me however. (no need for ide-scsi).
Is anyone else using this? Perhaps cdrecord should be modified to
default to this, so that it
82 matches
Mail list logo
