On Sun, 2006-02-19 at 09:07 +0200, Rumen Yotov wrote:
On Sun, 2006-02-19 at 16:21 +0930, Iain Buchanan wrote:
Hi again,
The kde tryout is progressing well. However, I just tried to plug in my
usb storage drive. Nothing happened.
I found the Settings Peripheral storage media; and
On Sun, 2006-02-19 at 17:52 +0930, Iain Buchanan wrote:
On Sun, 2006-02-19 at 09:07 +0200, Rumen Yotov wrote:
On Sun, 2006-02-19 at 16:21 +0930, Iain Buchanan wrote:
Hi again,
The kde tryout is progressing well. However, I just tried to plug in my
usb storage drive. Nothing
Hi!
In make.conf, I set PORTAGE_ELOG_MAILURI so that elog messages
of portage are mailed somewhere. I tried to relay the mail over
gmail and web.de, both fail. I suppose, they fail for the same
reason. smtp.web.de returns the following error message and
refuses to relay the mail in turn:
!!! An
On Sun, 19 Feb 2006 17:52:08 +0930, Iain Buchanan wrote:
As there's a close relation between kernel version dbus,hal,ivman
versions, not all combinations work, watch out.
hmm, I have linux-2.6.15-r5 (suspend2); hal 0.5.5.1-r3; dbus 0.60-r4;
Which version of KDE? 3.4 and 3.5 require
On Sunday 19 February 2006 10:22, Alexander Skwar wrote:
PORTAGE_ELOG_MAILURI
see also
http://www.nabble.com/logmail---need-fully-qualified-address-p2779050.html
ciao
Francesco
--
Linux Version 2.6.15-gentoo-r5, Compiled #1 PREEMPT Sun Feb 12 07:50:34
CET 2006
One 1GHz AMD Athlon 64
Francesco Talamona wrote:
On Sunday 19 February 2006 10:22, Alexander Skwar wrote:
It seems, as if the mail generated by portage is sent with a
From: portage, ie. with no domainpart added.
How do I change that? I'd like/need to have a (or rather, my)
domain there.
Are you running ssmtp,
Francesco Talamona wrote:
On Sunday 19 February 2006 10:22, Alexander Skwar wrote:
PORTAGE_ELOG_MAILURI
see also
http://www.nabble.com/logmail---need-fully-qualified-address-p2779050.html
Thanks. I *knew* that there was a thread, recently. Couldn't
find it, though...
Alexander Skwar
--
Hello!
Some mailproviders have usernames which contain a @ in the username,
like
[EMAIL PROTECTED]
How do I specify the @ in the PORTAGE_ELOG_MAILURI?
Alexander Skwar
--
If truth is beauty, how come no one has their hair done in the library?
-- Lily Tomlin
--
Rohit Sharma wrote:
are you trying to eject here and that fails? Or a boot? What are you
trying to do?
If it was my drive, and I was sure it was not dying on me - I would
probably not bother at all - unless it was unable to play music or write
media.
Nothing fails. Well, if you can call
Walter Dnes wrote:
I'm trying to clean some cruft out of the kernel. lspci shows...
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev
a2) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
On Sun, 19 Feb 2006 11:02:05 +0100, Alexander Skwar wrote:
Some mailproviders have usernames which contain a @ in the username,
like
[EMAIL PROTECTED]
How do I specify the @ in the PORTAGE_ELOG_MAILURI?
PORTAGE_ELOG_MAILURI=[EMAIL PROTECTED] mail.digimed.co.uk
works for me, so
No, not yet, I am using generic Radeon drivers less performance
but the system do not lock up. :( snip.
On 2/19/06, Ghaith Hachem [EMAIL PROTECTED] wrote:
any luck getting it to work?
i have moved to modular X but ati-drivers still get the system locked up
On 2/15/06, Ghaith Hachem
Hello everybody out there!
Here I am again, ready to fight!!
First of all, I'll start doing things in the right way, I'm burning the
2005.1-r1 live cd to perform a proper installation process from it. I
think Ubuntu is making my system a little crazy (I've noticed some
strange things wich won't
Neil Bothwick wrote:
On Sun, 19 Feb 2006 11:02:05 +0100, Alexander Skwar wrote:
Some mailproviders have usernames which contain a @ in the username,
^
like
[EMAIL PROTECTED]
How do I specify the @ in the
On Sunday 19 February 2006 04:16, James wrote:
hdparm -I /dev/hdc
ATAPI CD-ROM, with removable media
Model Number: TOSHIBA DVD-ROM SD-R2412
Serial Number: Z34A308331
Firmware Revision: 1015
well, every info that is needed for identification ;)
--
On Sunday 19 February 2006 05:27, Walter Dnes wrote:
I'm trying to see if I can tweak things a little bit. Here are the
last 2 entries from the output of lspci -v...
IIRC this ati cards have to chips, so it is normal to have to entries in
lspci.
--
gentoo-user@gentoo.org mailing list
On Sunday 19 February 2006 10:29, Neil Bothwick wrote:
On Sun, 19 Feb 2006 17:52:08 +0930, Iain Buchanan wrote:
As there's a close relation between kernel version dbus,hal,ivman
versions, not all combinations work, watch out.
hmm, I have linux-2.6.15-r5 (suspend2); hal 0.5.5.1-r3; dbus
generic drivers?
no DRI right?
at least not in here
i'm using that too
i was thinking about that problem the only diffrence i have in my
system since it was working is the gcc 3.4.4 instead of the 3.3 on the
old install
On 2/19/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
No, not yet, I am
Good morning everyone:
I am hitting a bit of an issue here -- there are work arounds available
but I would like to do it right. Here is the issue
I use Gentoo on my laptop that I use for digital photography. When I
shoot, I tend to shoot several hundred pictures at once, so I use large
flash
Am Samstag, 18. Februar 2006 22:44 schrieb Christopher Cowart:
Add the following lines to ~/.gnupg/gpg.conf:
keyserver x-hkp://pgp.mit.edu
keyserver-options auto-key-retrieve include-disabled include-revoked \
honor-keyserver-url
(Except don't break the line in your conf)
O.K., thanks,
On 2006-02-19 08:50:02 -0500 (Sun, Feb), Timothy A. Holmes wrote:
Good morning everyone:
Good afternoon :-)
Put flash card in reader
Plug reader into usb port
Wait for reader to settle
Open root terminal
Check dmesg for dev node for reader
Mount /dev/sda1 /mnt/flash
Do the transfer with
Hi,
I have a small problem with hal/dbus/ivman on my laptop. Everytime I boot the
laptop I get a new entry in /media for my CD-writer, so after a few reboots I
have the following in directorties in media
cdrw/
cdrw1/
cdrw2/
...
cdrw102/
On my desktop I have the same config files (as far as I
Hi,
I can't seem to find out how to get java working again in firefox (1.5).
I am running blackdown (std, 1.4.2) and I simply don't get java with
most sites now. Is it possible that I need to update to sun's 1.5?
Cheers
Antoine
--
gentoo-user@gentoo.org mailing list
--- Timothy A. Holmes [EMAIL PROTECTED] wrote:
Good morning everyone:
Good evening :)
What I would like is for either the card to be
automatically recognized
and mounted, or at least to not have to do it via
the root terminal
The right way would be to make sure you have the hal
use flag set
Christopher Cowart wrote:
Thanks Chris, I never understood this [EMAIL PROTECTED] (probably because I
have inadequate knowledge of many matters relating to mail within an OS).
Where is [EMAIL PROTECTED], where is mail for [EMAIL PROTECTED] stored, how
is
it meant to be retrieved?
Hans-Werner Hilse wrote:
Hi,
On Sat, 18 Feb 2006 18:51:21 +0100
Maarten [EMAIL PROTECTED] wrote:
Back to the thread... I started wondering about something. I thought a
100% full root filesystem was deadly, but never thought about /tmp.
So I'd like to ask, what is more deadly for a system, a
Brett I. Holcomb wrote:
And he may have a good quality one but it's dying. I had to replace a PC
Power and Cooling recently. After 5 years one of the voltages was
dropping
low. I finally caught it because on an alert by the motherboard monitor
which gave me an alarm. That system was
i switched to the 2.6.14 kernel and forced gdm to restart x if i
logout (in /etc/X11/gdm/gdm.conf)
it seems to be normal for now i'm still testing though
On 2/19/06, Ghaith Hachem [EMAIL PROTECTED] wrote:
generic drivers?
no DRI right?
at least not in here
i'm using that too
i was thinking
hello,
I have been looking into compiling a 2.6 kernel for an older Pentium III
with latest unstable ck-sources and found a few really reallly weird
things here that worried me a bit. For example, when I go to
Device Drivers --
USB-support--
actually nothing shows up except for
kashani wrote:
Assuming it's a database server a full /tmp will cause some issues.
In how far? Neither Oracle nor MySQL write to /tmp. MySQL may create
a socket file, which by default resides in /tmp. But /tmp is a rather
bad place for such a file anyway...
Alexander Skwar
--
Jason Stubbs wrote:
On Sunday 19 February 2006 21:55, Alexander Skwar wrote:
# full syntax is:
# address [[user:[EMAIL PROTECTED]:port]]
I want to set the user part to [EMAIL PROTECTED], but
don't know how to do that.
I've been struggling to get my wireless card to connect to the WEP
Airport router at my housing complex. It turns out it connects just
fine using a Knoppix disc and manual ifconfig/iwconfig commands, but
the same commands don't work in Gentoo. My Gentoo packages are
totally up to
It is a program provided by the motherboard manufacturer that monitors the
status of the board. In this case it was an ASUS board on a windows system
and their program is asusprobe. Linux uses lm-sensors if I remember
correctly.
On Sunday February 19 2006 14:54, Mick wrote:
Brett I.
Mick wrote:
I don't necessarily understand the ins outs of system mail on a desktop,
but as an idea wouldn't it be possible to set /etc/ssmtp/revaliases with
your [EMAIL PROTECTED] address and point PORTAGE to use ssmtp to do the
posting for you?
Yes, it would. :)
Alexander Skwar
--
Alexander Skwar wrote:
kashani wrote:
Assuming it's a database server a full /tmp will cause some issues.
In how far? Neither Oracle nor MySQL write to /tmp. MySQL may create
a socket file, which by default resides in /tmp. But /tmp is a rather
bad place for such a file anyway...
Never
kashani wrote:
Alexander Skwar wrote:
kashani wrote:
Assuming it's a database server a full /tmp will cause some issues.
In how far? Neither Oracle nor MySQL write to /tmp. MySQL may create
a socket file, which by default resides in /tmp. But /tmp is a rather
bad place for such a file
Alexander Skwar
snippage of pedantic nit picking and back peddling
Yes Mysql writes to /tmp by default and yes you can change it in which
case if that partition is full then you see the same behavior. So we can
say that Mysql really wants its temp space to have enough room for it to
write
On 2/18/06, Iain Buchanan [EMAIL PROTECTED] wrote:
USE=hal emerge -p --newuse world
You need to add -D/--deep to this command line, otherwise you are only
looking at packages explicitly named in world, not their dependancies.
FYI the necessary package is kdebase-kioslaves:
[ebuild R ]
Then you're part of a dying breed evidently.
I wasn't able to get cups to work so installed lprng.
For more details on my problem go to the archives and
search against my name and 'print' and 'cups'
This is what I see in my log. It says at least two
spoolers active but ps -A reveals only one.
Alexander Skwar wrote:
Mick wrote:
I don't necessarily understand the ins outs of system mail on a
desktop, but as an idea wouldn't it be possible to set
/etc/ssmtp/revaliases with your [EMAIL PROTECTED] address and point
PORTAGE to use ssmtp to do the posting for you?
Yes, it would.
On Sun, 2006-02-19 at 10:59 +0200, Rumen Yotov wrote:
IMO you should also install ivman which will install 'pmount', as dep.
I already have pmount for some reason. If that's the only reason to
install ivman, then I'll ignore ivman.
Check that all daemons are started.
yep, they are.
thanks,
On Sun, 2006-02-19 at 14:12 +0100, Hemmann, Volker Armin wrote:
On Sunday 19 February 2006 10:29, Neil Bothwick wrote:
On Sun, 19 Feb 2006 17:52:08 +0930, Iain Buchanan wrote:
As there's a close relation between kernel version dbus,hal,ivman
versions, not all combinations work, watch
Hey guys. Just my two cents - I'm having trouble configuring the Epson
C86, which is odd, because I've used this printer with Gentoo/CUPS
before, and never had any problems. It's odd that gimp-print is
installed, and I don't see the drivers popping up in the web interface.
I'll keep you posted!
On Sunday 19 February 2006 03:29 pm, Jeff wrote:
Hey guys. Just my two cents - I'm having trouble configuring the Epson
C86, which is odd, because I've used this printer with Gentoo/CUPS
before, and never had any problems. It's odd that gimp-print is
installed, and I don't see the drivers
Hi,
I'm downloading some KDE apps source code to know how Makefiles.am are
pointed. I've become surprised because I've seen that for example, amaroK has
been developed under KDevelop.
I have been searching a bit and I can't find any QT app that use
METASOURCES
= AUTO, and
Oh, another thing that I didn't tell you:
I'm an order maniac. When I start a project, my src directory has lots
of
subdirectories like 'base', 'gui'... and so on. I've seen that is almost a
MUST to keep ALL *.UI FILES (from QT) in 'src' (at least KDevelop wants it).
That is
I am in the process of installing on another computer at the moment
which has this via_rhine network interface. I will not start normally
without a solution I have found on the net. At least this worked for the
liveCD installation stage. It is issuing acpi=off and noapic to the
kernel.
Now it is
On Monday 20 February 2006 00:19, Iain Buchanan wrote:
and do you ahve the right entries in fstab for devices covered by hal?
Correct me if I'm wrong, but isn't the combined idea of hal, dbus, udev
and auto mounting that you don't need entries in fstab? Of course, I
have an entry for my
Are you sure /etc/resolv.conf is O.K.
--
gentoo-user@gentoo.org mailing list
On Monday 20 February 2006 08:39, Antoine wrote:
Hi,
I can't seem to find out how to get java working again in firefox (1.5).
I am running blackdown (std, 1.4.2) and I simply don't get java with
most sites now. Is it possible that I need to update to sun's 1.5?
Cheers
Antoine
the blakcdown
Are you sure /etc/resolv.conf is O.K.
absolutely.
It just contains:
nameserver 192.168.1.1
I found the solution (for the liveCD) here, but still, after boot these
options do not do the job anymore:
http://skreak.com/m6805/
I don't know, but I though there must have been some
On Monday 20 February 2006 11:29, Manuel A. McLure wrote:
/bin/echo -e -n Hello\\015\\012World\\015\\012\\014 textfile.txt
I am having similar difficulty getting my hp720c working. After trying the
test you suggested, I still got just nothing on the printer. I have both
parport, parport_pc,
On Mon, 2006-02-20 at 14:02 +1300, Glenn Enright wrote:
the blakcdown version is a little dated now, but should still work with most
sites.
what jre would you recommend?
--
Iain Buchanan iain at netspace dot net dot au
What one fool can do, another can.
-- Ancient Simian
On Sunday 19 February 2006 05:14 pm, Glenn Enright wrote:
On Monday 20 February 2006 11:29, Manuel A. McLure wrote:
/bin/echo -e -n Hello\\015\\012World\\015\\012\\014 textfile.txt
I am having similar difficulty getting my hp720c working. After trying the
test you suggested, I still got just
On Monday 20 February 2006 13:49, Iain Buchanan wrote:
On Mon, 2006-02-20 at 14:02 +1300, Glenn Enright wrote:
the blakcdown version is a little dated now, but should still work with
most sites.
what jre would you recommend?
--
Iain Buchanan iain at netspace dot net dot au
What one fool
On Monday 20 February 2006 13:54, Manuel A. McLure wrote:
On Sunday 19 February 2006 05:14 pm, Glenn Enright wrote:
On Monday 20 February 2006 11:29, Manuel A. McLure wrote:
/bin/echo -e -n Hello\\015\\012World\\015\\012\\014 textfile.txt
I am having similar difficulty getting my hp720c
krgn wrote:
Are you sure /etc/resolv.conf is O.K.
absolutely.
It just contains:
nameserver 192.168.1.1
I found the solution (for the liveCD) here, but still, after boot these
options do not do the job anymore:
http://skreak.com/m6805/
I don't know, but I though there must have
On Monday 20 February 2006 13:44, krgn wrote:
Something else made me suspicous after I finished working
within the liveCD environment was that the via_rhine module was always
together with another module called 'mii' which I don*t know yet. That
is another difference to the liveCD setup. Maybe
On Sunday 19 February 2006 18:32, Rafael Fernández López wrote:
That is one of the reasons because I would like to write my own
Makefile.am. But lots of questions came to my mind, like if I have
something like:
myproject
src
gui
base
Iain Buchanan wrote:
Correct me if I'm wrong, but isn't the combined idea of hal, dbus, udev
and auto mounting that you don't need entries in fstab?
Yes, you're right. You don't need to manually add entries
to fstab. udev/hal will do that on the fly for you.
And with Gnome, this works
Be careful, however, about virtual packages.
For example, equery depenxs xorg-x11 will give you nothing - but you can
not safely unmerge it, as it's the only package for the virtual package
x11, and there actually are a lot of packages depending on x11.
I do not know how to correctly deal with
61 matches
Mail list logo