Finally, finally I have the Xorg-server worked correctly and installde
KDE Meta. I wanna say it is so difficult to have done these !
Now , I can start KDE, but after I input username and password,
it only showed a panel with four icons( I think you guys who use KDE
will see this everytime when KDE
Does this help?
http://forums.gentoo.org/viewtopic-t-889262-view-next.html?sid=362067832d51d0cad5d2e8bd2199b84b
I afraid it is not so much helpful.
At 2011-12-15 03:24:20,Michael Schreckenbauer grim...@gmx.de wrote:
Am Mittwoch, 14. Dezember 2011, 14:22:47 schrieb Lavender:
Now I'm totally confused, I can't find helpful information from Internet.
I know mesa is a open source implementation of OpenGL, obviously
mesa will afford OpenGL API
About Mesa:
http://www.mesa3d.org/intro.html
About DRI:
http://dri.freedesktop.org/wiki/
--
Andrés Becerra Sandoval
Thanks, the web pages you provided I have already read before, these don't seem
to provide helpful issues for my questions.
libglx can also be provided by driver packages. You can select the
xorg one or others via eselect;
proxy adam # eselect opengl list
Available OpenGL implementations:
[1] ati *
[2] xorg-x11
Also, I imagine those kernel options supply an interface for the DRM/DRI
driver.
Thank you very
Now I'm totally confused, I can't find helpful information from Internet.
I know mesa is a open source implementation of OpenGL, obviously
mesa will afford OpenGL API. DRI is short for Direct Rendering Infrastructure,
I have chosen options like:
Device Drivers ---
Graphics support ---
*
See if you can access it using ssh from another PC. Then check
/var/log/Xorg.0.log for any error messages.
--
I have checked my Xorg.0.log, there is no error message. I have a question,I
read xorg.conf , I didn't find any area about Window Manage, so how xorg-server
knowswhich WM to invoke
No it's the gpu family. Did you look at this link on James' page:
http://en.wikipedia.org/wiki/Comparison_of_AMD_graphics_processing_units
Above each table it tells you which RXXX you should use, if your card is
listed below.
Oh, I should use RV710, that is really a long distance from
At 2011-12-09 19:38:06,Pandu Poluan pa...@poluan.info wrote:
As the subject says: Which text browser do you recommend?
( I just want to read some documentations in HTML. )
I'm using lynx, I feel it is great ! Lynx is small but efficient, I think it is
totally enough for your demand, :-)
At 2011-12-10 10:42:03,Claudio Roberto França Pereira spide...@gmail.com
wrote:
Yes, exactly. The first time you were missing
CONFIG_EXTRA_FIRMWARE_DIR, it should point to /lib/firmware if you've
emerged radeon-ucode.
Yes,that's right, when I checked my .config file I found that
I'm being working out with building KDE environment recently.
Now I need installing Xorg first. As the The X Server Configuration HOWTO
says,
if I use radeon card ,then I need emerge radeon-ucode or linux-firmware package.
Then I need rebuild my kernel with External firmware blobs . My video
I maintain http://en.gentoo-wiki.com/wiki/Radeon , which should sort you out.
If not, please post again I'll update the article to be more helpful.
I'm sorry, cause the policy of Internet in my country, I can't open the
webpage.Could you send it to me or use other methods?
I'm sorry, cause the policy of Internet in my country, I can't open the
webpage.
Could you send it to me or use other methods?
Please see my off-list reply.
Thanks a lot ! But I used lspci -v | less, it printed vebose information, then
I looked up carefullyfor my video card, but I did not
Thanks a lot ! But I used lspci -v | less, it printed vebose information, then
I looked up carefully
for my video card, but I did not find anything about R600,R700 or other like,
I'm still not clear
about R*** things , is it chipset name?
Hmm, I re-installed radeon-ucode package and I'm sure
I think you need:
CONFIG_PREVENT_FIRMWARE_BUILD=y
Configured into your kernel.
Have a look at your dmesg output. It should have your Radeon card
version listed. Mine is a Radeon REDWOOD chip.
Here's my kernel config relating to building firmware into the kernel:
Thank you, I'll try. Hope
After xorg-server installed, I follow the description in the handbook using
Xorg -configre. Unfortunately , it failed . The message is below:
[ 621.762] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 621.762] _XSERVTransOpen: transport open failed for inet6/Matrix:0
[
At 2011-12-06 10:52:35,Claudio Roberto França Pereira spide...@gmail.com
wrote:
Did you try to build a kernel without network facilities?
What's that meaning? I built kernel with necessary drivers, of course I have a
work-fine networkafter Gentoo built up . Does it have anything to do with X ?
I don't think that has anything to do with KDE.
Maybe this forum thread is part of the answer?
http://forums.gentoo.org/viewtopic-t-886248-start-0.html
- Mark
This problem has solved,but I got another one.When I use startx , it says
that modules ati vesa fbdev don't existand no screens
It seems that you have not installed the correct drivers for your card and/or
have not defined these correctly in /etc/X11/xorg.conf, if indeed you have
created such a file (it may not be necessary to create it unless there is a
particular configuration need for your hardware).
I suggest you
I have recompiled the kernel as The X server configuration howto says.But
when I emerge xorg-server it had errors:!!!Error: The xorg-x11 OpenGL
implementation doesn't seem to provide!!!Error: libGL.so file. This might be an
effect of breakage introducedby a prioprietary driver installer.
I have cost eight hours and forty minutes in installing KDE Meta.
When I wake up this morning it has done. But when I startx,
it can't work, output messages are below:
xauth: file /root/.serverauth. ( is changed each time
I use startx) does not exist
/etc/X11/xinit/xserverrc : line2 :
Install kdm, modify /etc/conf.d/xdm, test it using /etc/init.d.xdm
start and turn kdm on permanently with rc-update
good luck,
Mark
Ah,thank you ! It seems that what I worried about would not happen :-)
The problem is that X is not installed. to install X, edit
/etc/make.conf and add VIDEO_CARDS=your video card here and emerge
xorg-server or emerge xorg-x11 to get X
Thanks, I hope it is all right without errors .
Could anyone tell me that where I can find the source
code of software on my system? Such as ls, cd .etc.
At 2011-11-10 21:06:21,Michael Schreckenbauer grim...@gmx.de wrote:
Hi,
first you have to find out to which package the binary you are interested in
belongs to, eg
~ $ equery b /bin/ls
* Searching for /bin/ls ...
sys-apps/coreutils-8.14 (/bin/ls)
(If you don't have equery, install
Humm , I guess he just want to look for the source code of gnu coreutils,
just download the gnu coreutils. http://ftp.cn.debian.org/gnu/coreutils/
uncompress it , then you can find them all .
Ha, you're right. I don't know how to call them as you call them coreutils.
I just want to study
Where can I get it ? I think it might have a English name cause I
didn't find it when I used name 飞天豹补丁 :-)
Also how to use it ? Directly install or build into kernel ?
在 2011-11-07 15:37:41，Blackdream W blackdream1...@gmail.com 写道：
We called 飞天豹补丁”
:) 这家伙比较忙, 用到新内核上可能需要费点功夫。我是个闲人，我修改过补丁
会及时跟进最新的内核的。 ^_^
repo.or.cz/w/linux-2.6/cjktty.git
Er , I'm not very clear about what you said. These stuffs in the webpage
that you gave, which should be picked and how to use ?
that a console font that displays
double byte
also needed,so which font should I choose?
At 2011-11-07 13:10:03,bill.long...@gmail.com wrote:
On Nov 6, 2011 8:01 PM, Lavender lavender_mat...@163.com wrote:
Lavender,
You should look into changing your locale, as a start. You can start here
http
在 2011-11-07 22:28:34，microcai micro...@fedoraproject.org 写道：
merge the utf8 branch , enable CJK font , recompile your kernel. enjoy it.
Thank you very much !
As the subject shows, I want to show Chinese on console.
Even if it is possible I also wish to write Chinese on console.
I'm not very clear about how to manipulate it. Appreciate to
any help, thank you !
在 2011-11-07 11:20:04，aca.jingru aca.jin...@gmail.com 写道：
zhcon
aca.jingru
Someone told me that zhcon is not stable, it may result in system crash.
I think safe method may be needed.
在 2011-11-07 13:10:16，microcai micro...@fedoraproject.org 写道：
show 可以，有内核级别的中文补丁。
要 write 的话可以使用 zhcon 或者 fbterm 配合 ibus-fbterm
其实我只要show就可以了，补丁叫啥名字，是不是直接安装就行了？
PS：原来这里还有Chinese啊，平时都不见冒泡。
You have to have the the correct drivers and alsa-utils emerge.
Good luck
Yeah, I rebuilt my kernel according to documentation which relative
to ALSA . FInally I have configured all of them perfectly , ha,
it's really not easy :-)
0 Oct 25 03:37 card0 -
../../devices/pci:00/:00:14.2/sound/card0
# ls /sys/class/sound/card0/
audio controlC0 device dsp
hwC0D0 id mixer number
pcmC0D0c pcmC0D0p power
subsystem uevent
Regards
Lavender
Er, if you have one sound card and one audio controller, then doesn't
that make two sound cards? :-/ (One actual sound card (PCI or PCIe) and
one integrated into the mainboard?)
Ha, I'm not comprehend with hardware .
You didn't install it then. It's in the media-sound/alsa-utils package.
When I modifed USE to USE=-X -gnome -kde -gtk ,
I finally successed in installing mplayer without graphical
desktop. But I got another problem.
# mplayer christmas\ in\ my\ heart.mp3
It printed some error messages though mplayer could played mp3 file
without sound.
Error Message:
[AO_ALSA]
First use modules. This post [1] from the forum is about the mic but
it walks you through the process of setting up sound pretty well.
HTH David
[1] http://forums.gentoo.org/viewtopic-t-869451-start-0.html
Thanks , I hope I can listen music when I finish reading this article.
Who told you that?
I searched information though internal search engine,
all I got was that wpa_supplicant don't support AES and
once I had tried it just like the configuration you gave ,
it failed ,so I thought wpa_supplicant still don't support AES .
Sorry, I made a mistake :-( , but finally I
Actually the subject is not correct . The emails
I sent before were writtern on a web page , not on
linux system , because I haven't install a KDE
desktop which means I only can work under linux
terminal.
So whenever I want to write a email I have to reboot
my computer and boot the windows
Well, there's more than one ways to achieve the same result.
You can continue to use a webmail account with a text mode web browser. There
are a few to choose from - some will work better than others:
www-client/elinks
www-client/links
www-client/lynx
Ha , the language I use is Chinese
Take a look at mail-client/mutt.
http://wiki.mutt.org/index.cgi?MuttGuide
Regards,
Florian Philipp
Thanks a lot , I will try it out.
I added USE=-KDE to /etc/make.conf ,
but when I use emerge like below :
# sudo emerge mplayer
OR
#sudo emerge amorok
I found that the emerge always download
something which contact with X11/lib .
I don't know why the USE I set have no effect.
I only want to listem music under console , no
more
Try installing mpg123
Ha, I think I'd better solve this problem first
Thank you all the same :-)
Well, these are X applications (and Amarok is a KDE application.)
Obviously they need X to work. USE flags are there to configure
*optional* dependencies and behaviors. For mplayer and Amarok, these
dependencies are not optional.
As others mentioned, you should install a command line player.
Well, these are X applications (and Amarok is a KDE application.)
Obviously they need X to work. USE flags are there to configure
*optional* dependencies and behaviors. For mplayer and Amarok, these
dependencies are not optional.
As others mentioned, you should install a command line player.
Moshbearandrey@gmail.com;
发送时间: 2011年10月20日(星期四) 下午2:06
收件人: gentoo-usergentoo-user@lists.gentoo.org;
主题: Re: [gentoo-user] Why can't I set the resolution of console ?
On Thu, Oct 20, 2011 at 02:05, Lavender 448463...@qq.com wrote:
I edit the command line of grub at boot time .
I
The essid of my dormitory wireless netword is Rebellion
and its password is I'll leave it up to you(It's OK to tell
you this private information :-) ) .
I typed command below
#iwconfig wlan0 up
#iwconfig wlan0 essid Rebellion
Commands above worked normally, then
#iwconfig wlan0 mode
Molmike...@gmail.com;
发送时间: 2011年10月21日(星期五) 晚上10:08
收件人: gentoo-usergentoo-user@lists.gentoo.org;
主题: Re: [gentoo-user] Why iwconfig wlan0 enc can't work?
On Fri, Oct 21, 2011 at 10:03 AM, Lavender 448463...@qq.com wrote:
The essid of my dormitory wireless netword is Rebellion
and its
?
2011/10/21 Lavender 448463...@qq.com:
What!!! I know wpa_supplicant don't support
AES encryption method ,so I use wireless tools..
So it seems that I have to use wpa_supplicant and
change AES encryption method into TKIP.
I feel a little depressed :-(
A WPA supplicant is a process
I edit the command line of grub at boot time .
I passed some parametres to kernel like below:
root=/dev/sda6 video=atyfb:1024x768@60m
and I also tried another one:
root=/dev/sda6 video=aty128fb:1024x768@60m
Both of them didn't show any error messages and the system
can start up,
Moshbearandrey@gmail.com;
发送时间: 2011年10月20日(星期四) 下午2:06
收件人: gentoo-usergentoo-user@lists.gentoo.org;
主题: Re: [gentoo-user] Why can't I set the resolution of console ?
On Thu, Oct 20, 2011 at 02:05, Lavender 448463...@qq.com wrote:
I edit the command line of grub at boot time .
I passed
: [gentoo-user] Why can't I set the resolution of console ?
On Thu, 2011-10-20 at 14:05 +0800, Lavender wrote:
I edit the command line of grub at boot time .
I passed some parametres to kernel like below:
root=/dev/sda6 video=atyfb:1024x768@60m
and I also tried another one:
root=/dev
How can I find out what parametres the kernel supports when it is in bootstrap?
that the kernelsupport?
On 10/19/2011 11:15 AM, Lavender wrote:
How can I find out what parametres the kernel supports when it is in
bootstrap?
It's documented in the kernel source tree:
/usr/src/linux/Documentation/kernel-parameters.txt
First of all I think I should apologize for my poor English , you must be very
painful to read my letters.
I'm a Chinese student and my English is not very well , actually it's suck. So
I will pay attention to making
letters more clear to understand.
To be honest, I'm not good at writing
: 2011年10月14日(星期五) 晚上11:52
收件人: gentoo-usergentoo-user@lists.gentoo.org;
主题: Re: [gentoo-user] Apologize to everyone for my nonprofessional
On Fri, Oct 14, 82011 at 11:43 AM, Lavender 448463...@qq.com wrote:
First of all I think I should apologize for my poor English , you must be
very painful
Hello, everyone ! I'm trying to build a kernel
manully and there is a problem.
I use lspci command and it shows my
VGA card information:
01:00.0 VGA compatible controller:
ATI Technologies Inc M92 LP
Then I type
$ cd /sys/bus/pci/devices/:01:00.0
$ cat vendor
$ cat device
: [gentoo-user] Can't find driver for VGA in kernel source tree
On Sat 15 Oct 2011 07:43:23 AM IST, Lavender wrote:
Hello, everyone ! I'm trying to build a kernel
manully and there is a problem.
I use lspci command and it shows my
VGA card information:
01:00.0 VGA compatible controller
I want to download it . I have searched in the distfiles directory on the
mirorrs , but I don't know where to get it . Anyone can tell me ?
To: gentoo-usergentoo-user@lists.gentoo.org;
Subject: Re: [gentoo-user] Where to get the gentoo kernel?
Lavender 448463...@qq.com [11-10-13 15:48]:
I want to download it . I have searched in the distfiles directory on the
mirorrs , but I don't know where to get it . Anyone can tell me
;
Subject: Re: [gentoo-user] Where to get the gentoo kernel?
Lavender 448463...@qq.com [11-10-13 15:48]:
I want to download it . I have searched in the distfiles directory on the
mirorrs , but I don't know where to get it . Anyone can tell me ?
Hi,
try
eix gentoo-sources
and than
] Where to get the gentoo kernel?
On Thu, 13 Oct 2011 21:44:05 +0800
Lavender 448463...@qq.com wrote:
I want to download it . I have searched in the distfiles directory on
the mirorrs , but I don't know where to get it . Anyone can tell me ?
It's called linux-something on the distfiles
:21 PM
To: gentoo-usergentoo-user@lists.gentoo.org;
Subject: Re: [gentoo-user] Anyone can afford information about build kernel?
Am Sonntag 09 Oktober 2011, 08:55:55 schrieb Lavender:
It seems that no matter I build gentoo manually or with genkernel I can't
have a fine-working kernel
about build kernel?
On Sun, Oct 9, 2011 at 9:30 AM, Michael Mol mike...@gmail.com wrote:
On Sun, Oct 9, 2011 at 12:53 AM, Lavender 448463...@qq.com wrote:
Yeah, your reply is exact what I mean , but I'm really confused by those
modules' names, I can't find any contact between the hard device
It seems that no matter I build gentoo manually or with genkernel I can't have
a fine-working kernel finally. Obviously I must solve it by myself , so I
determined to build entire kernel all manually , it requests a lot of linux
knowlege . All for that, I hope someone could tell me where to get
Govindarajancont...@nileshgr.com;
Date: Sun, Oct 9, 2011 10:09 AM
To: gentoo-usergentoo-user@lists.gentoo.org;
Subject: Re: [gentoo-user] Anyone can afford information about build kernel?
On 10/09/2011 06:25 AM, Lavender wrote:
It seems that no matter I build gentoo manually
: gentoo-usergentoo-user@lists.gentoo.org;
主题: Re: [gentoo-user] Help!
On Wednesday 05 Oct 2011 12:52:41 Lavender wrote:
Hi, everybody! I installed gentoo according to Gentoo Handbook , then I
login gentoo . But I found that I couldn't use wpa_supplicant for scanning
netcard device
The configuration of win kernel in grub.conf is like below:
rootnoverify (hd0,0)
makeactive
chainloader +1
It worked yesterday , but after I rebuilding grub software, it can't work. I
don't know why, it still can boot
gentoo kernel, I am confused,because grub only can do operations to
opinion?
-- Original --
From: Alan McKinnonalan.mckin...@gmail.com;
Date: Wed, Oct 5, 2011 11:39 PM
To: gentoo-usergentoo-user@lists.gentoo.org;
Subject: Re: [gentoo-user] Why grub can't load win kernel
On Wed, 5 Oct 2011 23:32:10 +0800
Lavender
Hi, everybody! I installed gentoo according to Gentoo Handbook , then I login
gentoo . But I found that I couldn't use wpa_supplicant for scanning netcard
device failed . I think that means the netcard module not loaded, so I type
lsmod and the output have only one line-Modules , according to
71 matches
Mail list logo
