Hi all
after upgrading KDE I cannot set the screen frequency. By default it is
set to 50 Hz, but it should be 54 Hz.
Every time I have to change it, but every time I start the PC the
frequency is always at 50 Hz.
This both as root and as user.
Any tip?
emilio
Volker Armin Hemmann ha scritto:
On Monday 30 August 2010, econti wrote:
Hi all
is it possible to page the output of emerge -NDpvu world in a terminal?
'emerge -NDpvu world | more' does not work.
emilio
works with less...
Not for me! :-(
Bye
emilio
Hi all
is it possible to page the output of emerge -NDpvu world in a terminal?
'emerge -NDpvu world | more' does not work.
emilio
Hi all,
finally I decided to upgrade from kde3 to kde4. All went well, but:
1 - I am not able to fix the frequency of the display, neither using
nvidia-settings nor throught System-settings-Dislplay. Every time a
session starts I have to set it again (and this both as root and as user);
As
cut
further
4 - I cannot mount a partition (both from command line and from
desktop) the answer is Only root can mount a device (all
permissions are the same as before)
I would check out groups username and see whether you are a member
of the plugdev group.
5 - I am not able to become
Amit Dor-Shifer ha scritto:
With regards to this:
I believe I'm in the same situation:
QUOTE
amit0 ~ # emerge -auvt world
These are the packages that would be merged, in reverse order:
Calculating dependencies... done!
!!! Multiple package instances within a single package slot have been
Dirk Heinrichs ha scritto:
Am Samstag 17 Oktober 2009 17:54:49 schrieb econti:
Now, to emerge akonadi-server, kcontrol I should downgrade all the qt-*
to the 4.5.1 version.
Says who? You can only tell what want's the downgrade when you add -t.
akonadi-server needs some qt packages
Tim Jones ha scritto:
Post #2 from Mr. McKinnon is the question.
If, as it sounds like, you didn't let revdep-rebuild go ahead and
reemerge those packages itself, but rather you reemerged them
yourself, then I believe you will need to `revdep-rebuild -i` (see
manpage) to see if it has any other
Hi all
after two months I made a world upgrade. All went well, but when I ran
revdep-rebuild I received this:
localhost ~ # revdep-rebuild
* Configuring search environment for revdep-rebuild
* Checking reverse dependencies
* Packages containing binaries and libraries broken by a package
Hi all
my to-day world is the one attached. I am just a little bit confused.
Can anyone explain to me what's happening? :-(
Thanks
emilio
[ebuild U ] media-gfx/imagemagick-6.5.2.9 [6.5.1.0] USE=X bzip2 corefonts
openmp perl truetype zlib -djvu -doc -fontconfig -fpx -graphviz -gs -hdri -jbig
AllenJB ha scritto:
cut
On to your next issue where 2 versions of firefox are being pulled in.
First of all you need to remove the package.mask entry you added,
since it masked out all versions of firefox above 2.0.0 - that
includes both firefox 2 and firefox 3 - not particularly useful.
Hi all,
to-day I am having some trouble to update my system.
Well, 'emerge --sync' and I received a message telling me a new version
of portage is available and I should update it immediately. But, before
upgrading it I ran 'emerge -NDpvu world'. Here is the output:
localhost ~ # emerge
Hi all,
running revdep-rebuild I see a very long list of broken linking (see the
attached gzipped file of the revdep-rebuild output).
At the end revdep-rebuild emerge orbit and libbonobo.
After that I ran revdep-rebuild again: same long list and same packages
to emerge.
That for three times
Francesco Talamona ha scritto:
On Saturday 27 September 2008, econti wrote:
Hi all,
running revdep-rebuild I see a very long list of broken linking (see
the attached gzipped file of the revdep-rebuild output).
At the end revdep-rebuild emerge orbit and libbonobo.
After that I ran revdep
Francesco Talamona ha scritto:
On Saturday 27 September 2008, econti wrote:
Francesco Talamona ha scritto:
On Saturday 27 September 2008, econti wrote:
Hi all,
running revdep-rebuild I see a very long list of broken linking
(see the attached gzipped file of the revdep-rebuild
cut
The others already gave you a working solution, but here's the reason
this is happening:
The qca package recently became slotted. However, only qca-1.0-r3 and
higher are slotted. You have qca-1.0-r2 installed with is *not*
slotted and therefore you can't install qca-2.x at the same
Hi all, to-day I upgraded my portage and then I ran
emerge -NDpvu here is the output:
[ebuild U ] dev-libs/libsigc++-2.2.2 [2.0.17] USE=-debug -doc
-test 4,397 kB
[ebuild U ] media-video/realplayer-11.0.0.4028-r1 [10.0.9] USE=X
-nsplugin 0 kB
[ebuild U ] dev-cpp/cairomm-1.6.0
Hi all,
to-day I upgraded realplayer from 10.0.9 to 11.0.0.4028-r1.
Now videos have weird colours.
Any tip?
Regards
emilio
Albert Hopkins ha scritto:
On Sun, 2008-08-17 at 14:20 +0200, econti wrote:
So I went to http://bugs.gentoo.org/show_bug.cgi?id=214265 to fix but
I
understood absolutely nothing. :-(
Could anyone explain to me in which manner I should use the bug page
of
gentoo?
I really don't
Hi all,
even if I have been using gentoo for 2 years surely I know to be a
newbie again. ;-(
Yesterday, upgrading the portage and after an emerge -NDpvu world I
received the following massage:
Calculating world dependencies /
!!! The following installed packages are masked:
-
Hi all,
finally my holidays are over and I made a portage upgrade.
Then: emerge -NDpvu world and I received this:
These are the packages that would be merged, in order:
Calculating world dependencies /
!!! All ebuilds that could satisfy
=media-video/ffmpeg-0.4.9_p20070616-r3 have been masked.
Hi all
I'd like to install OO on my Gentoo PC. I ran
emerge -s openoffice
and here is the result
* app-office/openoffice
Latest version available: 2.4.0
Latest version installed: [ Not Installed ]
Size of files: 247,060 kB
Homepage: http://go-oo.org
Description:
cut
Hi,
Try switching Off both '-zeroconf -vram'.
From the dhcpcd-3.2.3 elog:
elog * ZeroConf support enabled
elog * DUID support enabled
elog * You have installed dhcpcd with zeroconf support.
elog * This means that it will always obtain an IP address even if no
elog * DHCP server can be
Rumen Yotov ha scritto:
econti МапОÑ?а:
Hi all, yesterday I upgraded dhcpcd, now at boot time I receive this
message:
err, eth0: Failed to lookup hostname via DNS: Name or service not known
Even so, the IP is correctly assigned by the router.
Could anyone help me to understand
Hi all, yesterday I upgraded dhcpcd, now at boot time I receive this
message:
err, eth0: Failed to lookup hostname via DNS: Name or service not known
Even so, the IP is correctly assigned by the router.
Could anyone help me to understand? ;-)
Bye
emilio
--
gentoo-user@lists.gentoo.org
Hi all,
may be this is a stupid question but I am not able to set the
anti-aliasing on firefox and thunderbird.
Regards
emilio
--
gentoo-user@lists.gentoo.org mailing list
Hi all
I should upgrade xorg-server from 1.3.0.0-r2 to 1.3.0.0-r4.
But I read in another mailing list that the new version of xorg-server
has some (many?) bugs.
Is this true also for the gentoo version? Should I wait before upgrading?
Regards
emilio
--
gentoo-user@lists.gentoo.org mailing
Hi all,
yesterday I upgraded hplip. I should not, after a bad experience on FreeBSD.
But, while on FreeBSD I was able to downgrade to the previuos version, I
could not do the same on Gentoo.
The sequence:
- after upgrading hplip I ran hp-setup: the printer has been configured
- then I tried to
Dale ha scritto:
econti wrote:
Hi all,
yesterday I upgraded hplip. I should not, after a bad experience on
FreeBSD.
But, while on FreeBSD I was able to downgrade to the previuos version,
I could not do the same on Gentoo.
The sequence:
- after upgrading hplip I ran hp-setup: the printer has
Anno v. Heimburg ha scritto:
econti wrote:
So . . . I unmerged all the single app, unmerged kdebase-kioslaves and
emerged kdebase.
Now all works as before.
Wait, I don't get it. You have the single, all-in-one kdebase package
installed (which, to the best of my knowledge, includes
Hi all,
to-day I wanted ro emerge kdebase-kioslaves. To do so I had to unmerge
kdebase, then to emerge again every single application of kdebase:
konqueror, konsole, kate, kcontrol, kdm, etc.
Now I am not able to login anymore
Neither as root nor as user.
I tried to set a new password on
Dirk Heinrichs ha scritto:
Am Samstag 24 November 2007 schrieb econti:
Hi all,
to-day I wanted ro emerge kdebase-kioslaves.
Why?
To do so I had to unmerge kdebase,
Why?
then to emerge again every single application of kdebase:
konqueror, konsole, kate, kcontrol, kdm
Hi all,
to-day I re-emerged kdegraphics. At the end I had this message:
* /usr/kde/3.5/share/applications/kde/kfaxview.desktop: value
image/fax-g3 for string list key MimeType in group Desktop Entry
does not have a semicolon (';') as trailing character
*
Hi all
yesterday I emerged the nvidia-drivers. All went well.
Then I ran 'emerge -NDpvu world' (I set nvidia flag in make.conf) and
found out to have 2 versions of qt (3.3.8-r3 and 4.3.0-r2) and 2
versions og gnupg (1.4.7-r1 and 1.9.21).
So I unmerged gnupg-1.4.7-r1 and ran 'emerge -NDpvu
cut
not exactly sure, but I'd look under menuconfig- Device Drivers-
Graphics support. In particular:
* VESA VGA graphics support
VESA driver type (vesafb) (use vesafb-tng on 32-bit)
Console display driver support ---
[*] Video mode selection support (you already have this i
Hi all,
as the subject says! ;-)
Now my system should be updated. gcc, world and, to-day, the kernel.
Well, everything seems to work fine . . . but:
1 among the boot options I had vga=0x317. Now this option gives me:
You passed an undefined mode number.
Press RETURN to see video modes
Willie Wong ha scritto:
On Wed, Oct 24, 2007 at 05:24:19PM +0200, Penguin Lover econti squawked:
Hi all,
the upgrade of my system has had another stop.
This time due to PyQt. I googled and found many problems regarding PyQt,
but, because of my english, I did not understand what exactly
Hi all,
the upgrade of my system has had another stop.
This time due to PyQt. I googled and found many problems regarding PyQt,
but, because of my english, I did not understand what exactly to do.
Here is my error log:
--
Unpacking source...
Hi all,
I should upgrade /etc/locale.build to /etc/locale.gen.
I did not find anything about this upgrade.
Is it a matter of name changing only?
Regards.
emilio
--
[EMAIL PROTECTED] mailing list
Roman Zilka ha scritto:
Hey Emilio,
I should upgrade /etc/locale.build to /etc/locale.gen.
that's right, you should.
I did not find anything about this upgrade.
glibc has been warning about this for a very long time (year, I guess)
during emerge. glibc-2.6.1 is the first
Bo Ørsted Andresen ha scritto:
On Sunday 21 October 2007 18:23:16 Kenneth Prugh wrote:
At the end running etc-update I found 26 config files to upgrade .
Surely I did something wrong (to upgrade udev I had to unmerge
coldplug) and the result has been a failure in booting gentoo.
Here is the
Hi all,
after upgrading xorg, yesterday I started to upgrade gcc (from 3.x to
4.x) following the Gentoo GCC Upgrade Guide. All went well up to emerge
-eav system.
The command seemed work fine but, for some reason, it was not able to
emerge man-pages. The process aborted.
I added other gentoo
Scrolling my package db I found I have installed many automakes. Here
is the list:
drwxr-xr-x 2 root root 664 16 ott 10:36 automake-1.10
drwxr-xr-x 2 root root 936 9 feb 2006 automake-1.4_p6
drwxr-xr-x 2 root root 936 9 feb 2006 automake-1.5
drwxr-xr-x 2 root root 936 9 feb 2006
Alex Schuster ha scritto:
econti writes:
Hi all
to-day I successfully updated Xorg (from 6.x to 7.x).
A little trouble only; on boot I receive the following error message:
Setting up kdm . . .
start-stop-daemon: option `--exec' requires an argument
Try `start-stop-daemon --help' for more
Hi all
to-day I successfully updated Xorg (from 6.x to 7.x).
A little trouble only; on boot I receive the following error message:
Setting up kdm . . .
start-stop-daemon: option `--exec' requires an argument
Try `start-stop-daemon --help' for more information
*ERROR: could not start the Display
Patrick Holthaus ha scritto:
Hey!
There's no way to set the DM in Xorg's config. The DM is set in
/etc/conf.d/rc (or was it /etc/rc.conf?).
It should be /etc/conf.d/xdm
DISPLAYMANAGER=kdm
Patrick
It does not work! ;-(
DISPLAYMANAGER was already set to kdm
In my opinion the
Hi all,
I'm going to upgrade xorg. Following the Migrating to Modular X HOWTO
I ran:
grep Driver /etc/X11/xorg.conf and the output was:
Driverkbd
Drivermouse
Driver vga
Driver nv
Then I ran also
emerge --verbose --pretend xorg-x11
Here is part of the output:
Neil Bothwick ha scritto:
Hello econti,
So I should set INPUT_DEVICES=keyboard mouse and VIDEO_CARDS=nv vga
fbdev in my make.conf.
That looks reasonable, if you need fbdev.
But, what is the meaning of the minus sign preceding any of the video
card names? And the ones between
Hi everybody, this is my first post on the list.
Well, I'm running a 2.6.15-gentoo-r7 2006.0 on a AMD64 machine.
Now I'd like to make a world upgrade. I know that I should run the
following commands:
emerge --sync
emerge --update --deep --newuse world
emerge --depclean
revdep-rebuild
A
Denis ha scritto:
After you emerge --sync, run emerge -NDpvu world and post here the
output - the list of software your system wants to install/upgrade -
that should give us a better idea of what kind of an upgrade we're
dealing with here.
Here attached the outputs of both 'emerge -NDpvu
50 matches
Mail list logo