Charles Trois wrote:
Charles,
Did you do a rc-update add net.eth0 default so that the interface is
brought up at boot?
You may also want to take a look at this section of the Gentoo Handbook:
http://www.gentoo.org/doc/en/handbook/handbook-ppc.xml?part=4
HTH
Draeven
Draeven a écrit :
On Tue, 22 Nov 2005, Richard Fish wrote:
Ok, do dmesg and /proc/partitions agree that there is a partition
there? If not, then the problem is that the kernel is not recognizing
No...
your partition table. I would suggest:
insert the key
dd if=/dev/zero of=/dev/sda bs=512 count=1
remove
Hello,
emergeing openssh fails because the configure script detects the wrong
version of zlib:
error: *** zlib too old - check config.log ***
config.log shows that zlib 1.2.1 was detected, but I have 1.2.3
installed:
emerge -pv zlib
[ebuild R ] sys-libs/zlib-1.2.3 -build 0 kB
Does anyone
I noticed while emerging mysql that the ./configure flags used during
compile contained one that says: --without-docs
Not a good plan for someone knowing zip about mysql. How can I
change that to --with-docs from cmdline?
Another thing I noticed is this:
[...] --with-big-tables
Harry Putnam wrote:
I noticed while emerging mysql that the ./configure flags used during
compile contained one that says: --without-docs
Not a good plan for someone knowing zip about mysql. How can I
change that to --with-docs from cmdline?
You influence it, by setting USE flags. I'd
ive been trying to setup a mail server following the how-to at
http://gentoo-wiki.com/HOWTO_Linux_Virtual_Hosting_Server#Virtual_Mail_Hosting
and everything seems to have been setup correctly, but i keep getting
these errors and cant login
Nov 22 23:28:29 mail imapd: Connection,
Harry Putnam wrote:
I noticed while emerging mysql that the ./configure flags used during
compile contained one that says: --without-docs
Not a good plan for someone knowing zip about mysql. How can I
change that to --with-docs from cmdline?
Another thing I noticed is this:
[...]
Alexander Skwar [EMAIL PROTECTED] writes:
[...]
You influence it, by setting USE flags. I'd guess, that doc
would be the USE flag you're looking for. So, put something
like
dev-db/mysql doc
to /etc/portage/package.use:
echo dev-db/mysql doc /etc/portage/package.use
Just looking at
On 11/23/05, Jorge Almeida [EMAIL PROTECTED] wrote:
this time. This is just totally unreliable. I guess I'll boot from
KNOPPIX, to see whether it may be a kernel problem...
Yes, do that. And if it works I guess you will need to start
comparing the Knoppix kernel configuration to yours. Maybe
Hi,
Does anyone know what network activity is being shown by xosview? Is it
activity before iptables filtering, or after? I wonder as I am getting
a constant flow varying between 100-1000 as read on xosview.
I get this with no internet related running processes. I have a default
block on my
Harry Putnam wrote:
Alexander Skwar [EMAIL PROTECTED] writes:
[...]
You influence it, by setting USE flags. I'd guess, that doc
would be the USE flag you're looking for. So, put something
like
dev-db/mysql doc
to /etc/portage/package.use:
echo dev-db/mysql doc
Mattias Merilai wrote:
I do not know much about mysql, but looking at the latest ebuild it
seems that it does not look for a doc USE flag.
I disagree. Check the output of emerge -pv dev-db/mysql.
Alexander Skwar
--
Men of quality are not afraid of women for equality.
--
Mattias Merilai [EMAIL PROTECTED] writes:
seems that it does not look for a doc USE flag. You will have to
manually change the ebuild to --with-docs. Gentoo's ebuild howto will
explain you how to do that.
And this can be foundwhere? I've been jerking around on
gentoo.org for over 1/2 hr
Pardon my ignorance, but I can't seem to get past this. Any ideas?
Preparing svgalib_helper module
make -C /usr/src/linux
SUBDIRS=/var/tmp/portage/svgalib-1.9.21-r1/work/svgalib-1.9.21/kernel/svgalib_helper
CLASS_CFLAGS=-DCLASS_SIMPLE=1 modules
make[1]: Entering directory
Alexander Skwar [EMAIL PROTECTED] writes:
Me too. Seems that the system didn't get that change.
Please send output of:
grep dev-db/mysql /etc/portage/package.use
dev-db/mysql mysql mysqli
dev-db/mysql doc
dev-db/mysql ndb-doc
--
gentoo-user@gentoo.org mailing list
I wanted to ask if anyone on the list is running a large MySQL database
and for their server hardware recommendations. The servers are
anticipated to have a DB of 10-20GB, with about 5000-1 clients
(automated). The database will be mostly used for updates to the data
making up most of the
On 11/23/05, Richard Fish [EMAIL PROTECTED] wrote:
On 11/23/05, Harry Putnam [EMAIL PROTECTED] wrote:
And this can be foundwhere?
/usr/portage/profiles/use*.desc
Oops, sorry, thought you were asking about where to find the USE flag.
I was reading out-of-order...and not thinking right.
On 11/23/05, Rob [EMAIL PROTECTED] wrote:
Hi,
Does anyone know what network activity is being shown by xosview?
Use the source Luke
It sums the RX and TX columns for all devices in /proc/net/dev.
-Richard
--
gentoo-user@gentoo.org mailing list
Richard Fish [EMAIL PROTECTED] writes:
/usr/portage/profiles/use*.desc
Those are a HOWTO about creating ebuilds?
--
gentoo-user@gentoo.org mailing list
Frank Pikelner wrote:
I wanted to ask if anyone on the list is running a large MySQL database
and for their server hardware recommendations. The servers are
best results obtained on IBM x445
scalable to 16 processors and to 32G of RAM with an iteresting 3rd level
cache and a not so
Alle 15:01, mercoledì 23 novembre 2005, Harry Putnam el ga butta:
|I noticed while emerging mysql that the ./configure flags used
| during compile contained one that says: --without-docs
|
|Not a good plan for someone knowing zip about mysql. How can I
|change that to --with-docs from
Hello list..
Is it possible to send an attachment using the 'mail' command say in a
cronjob? i have a file that i would like sent to me before deleted and
recreated to examine it.. but 'man mail' doesnt exactly suggest that an
attachment is possible
Thanks in advance..
Regards ..
Leonard
Richard Fish [EMAIL PROTECTED] writes:
Assuming you really need a specific version of mysql, and do not want
to merge a version that already has the doc USE flag, the general idea
is that you will want to:
I don't need a specific version I simply want the docs to be built.
Adding a use flag
I've synced portage and run emerge -v -u World
First thing I see happening is its building a older kernel than what
I'm running: 2.6.14 but emerge is building:
linux-2.6.11.tar.bz2
Why is that?
--
gentoo-user@gentoo.org mailing list
On Wed, 23 Nov 2005 11:58:40 -0500, Leonard - Gentoo wrote:
Is it possible to send an attachment using the 'mail' command say in a
cronjob? i have a file that i would like sent to me before deleted and
recreated to examine it.. but 'man mail' doesnt exactly suggest that an
attachment is
On Wed, 23 Nov 2005 11:56:43 -0600, Harry Putnam wrote:
I don't need a specific version I simply want the docs to be built.
Adding a use flag of doc or docs does not cause it to be built. At
least not in what was current portage day before yesterday.
That's because
Francesco R. [EMAIL PROTECTED] writes:
[...] Snipped good info here ... Thanks
also the configure option you see at compile time may _not_ be the
same the ebuild used, _but_ what the ebuild set always override the
MySQL default.
So we cannot really tell what is passed to the compiler?
Alexander Skwar [EMAIL PROTECTED] writes:
Mattias Merilai wrote:
I do not know much about mysql, but looking at the latest ebuild it
seems that it does not look for a doc USE flag.
I disagree. Check the output of emerge -pv dev-db/mysql.
The original output I posted:
Calculating
Hello,
Thanks for the suggestion!
Regards ..
Leonard
- Original Message -
From: Neil Bothwick [EMAIL PROTECTED]
To: gentoo-user@lists.gentoo.org
Sent: Wednesday, November 23, 2005 12:28 PM
Subject: Re: [gentoo-user] mail command and attachment?
--
gentoo-user@gentoo.org mailing
On Wed, 23 Nov 2005 12:10:24 -0600, Harry Putnam wrote:
First thing I see happening is its building a older kernel than what
I'm running: 2.6.14 but emerge is building:
linux-2.6.11.tar.bz2
I think you'll find it is emerging linux-headers, not a new kernel. This
does not have to be the same
Alle 19:37, mercoledì 23 novembre 2005, Harry Putnam el ga butta:
|Francesco R. [EMAIL PROTECTED] writes:
|
|
|[...] Snipped good info here ... Thanks
|
| also the configure option you see at compile time may _not_ be
| the same the ebuild used, _but_ what the ebuild set always
|
Benno Schulenberg a écrit :
Charles Trois wrote:
The legal time, here in France and at this (winter) period, is
GMT + 1, as shown correctly by the clock of my iMac, but date
keeps returning GMT + 2.
Sounds like your harware clock is running at local time. What does
'hwclock --show
Alle 15:01, mercoledì 23 novembre 2005, Harry Putnam el ga butta:
|I noticed while emerging mysql that the ./configure flags used
| during compile contained one that says: --without-docs
|
|Not a good plan for someone knowing zip about mysql. How can I
|change that to --with-docs from
Harry Putnam schreef:
Alexander Skwar [EMAIL PROTECTED] writes:
Me too. Seems that the system didn't get that change. Please send
output of:
grep dev-db/mysql /etc/portage/package.use
dev-db/mysql mysql mysqli dev-db/mysql doc dev-db/mysql ndb-doc
Harry, put all the USE
Dear friends,
please guide me to deploy a gentoo linux server cluster. currently i
have 7 piii 800Mhz machines want to test a cluster server. if
somebody can point me step by step or a good guide, it will very
appreciable.
all advices are welcome.
--
...
The future lies ahead.
Dear friends,
i have to replace our existing wired network to wireless network. so
please help me to deploy a wireless authentication gateway using linux
based open source application which provides a total security solution
for wireless networks. please guide me to deploy this.
:::all advices
Frank Pikelner wrote:
I wanted to ask if anyone on the list is running a large MySQL database
and for their server hardware recommendations. The servers are
anticipated to have a DB of 10-20GB, with about 5000-1 clients
(automated). The database will be mostly used for updates to the data
On Wednesday 23 November 2005 08:22 am, Frank Pikelner wrote:
Just as a side not, I've always wondered the type of hardware used by Google
as they have been very successful in using smaller inexpensive boxes
according to the rumors that have circulated on the Internet.
Wikipedia has an
Hello everybody,
My .bash_history file stopped being updated on Nov 13
10:06. A look at /var/log/messages for that particular
time revealed nothing amiss.
Anybody shed light on this issue?
-mw
__
Start your day with Yahoo! - Make it your home
This is to continue the thread Return of My Continuing ALSA woes.
I was enjoying the thread right up until the point where the Michael claimed his problem was solved.
Here's my setup, which is the same as Michael's:
linux-2.6.15-rc1-mm2 # lspci | grep Audio
:00:1b.0 Audio device: Intel
At Tue, 22 Nov 2005 13:17:27 + Ciaran McCreesh [EMAIL PROTECTED] wrote:
The only way you can safely change CHOST is by making new stages
through catalyst. There're various scripts which *sometimes* fix your
system after a CHOST change, but they're not reliable...
Does this mean that, if
On Tue, Nov 22, 2005 at 09:20:10AM +1000, Richard Watson wrote:
Hi - I just upgraded my kernel-genkernel-x86-2.6.12-gentoo-r10 to
kernel-genkernel-x86-2.6.14-gentoo-r2. So far I have no sound (Alsa) or
wireless connectivity (ipw2100). Do I need to re-emerge the relevant
packages? And if
ive been trying to setup a mail server following the how-to at
http://gentoo-wiki.com/HOWTO_Linux_Virtual_Hosting_Server#Virtual_Mail_Hosting
and everything seems to have been setup correctly, but i keep getting these
errors and cant login
I know I had to reduce the set of authentication
On Wed, 23 Nov 2005, Richard Fish wrote:
On 11/23/05, Jorge Almeida [EMAIL PROTECTED] wrote:
this time. This is just totally unreliable. I guess I'll boot from
KNOPPIX, to see whether it may be a kernel problem...
Yes, do that. And if it works I guess you will need to start
comparing
On 11/23/05, James Hiscock [EMAIL PROTECTED] wrote:
ive been trying to setup a mail server following the how-to at http://gentoo-wiki.com/HOWTO_Linux_Virtual_Hosting_Server#Virtual_Mail_Hosting
and everything seems to have been setup correctly, but i keep getting these errors and cant loginI
On Thu, 24 Nov 2005 09:24, Harold Naparst wrote:
snip
and then:
/etc/init.d/alsasound restart
* WARNING: you are stopping a boot service.
* Storing ALSA Mixer Levels ...
/usr/sbin/alsactl: get_control:149: Cannot read control info '2,0,0,Front
Playback Volume,0': Invalid argument
Well, I rebooted and then it worked.
So, who knows what's going on...
But while we're at it, should I choose six channel or two-channel mode,
and what's the deal with the three input sources on the right side
of alsamixer?
On 11/23/05, Glenn Enright [EMAIL PROTECTED] wrote:
On Thu, 24 Nov 2005
On Nov 23, 2005, at 7:35 pm, maxim wexler wrote:
My .bash_history file stopped being updated on Nov 13
10:06. A look at /var/log/messages for that particular
time revealed nothing amiss.
Ok... this could be a dumb question, but how much disk space do you
have free?
Stroller.
--
I'm using Xorg 7 rc's, and I'm no longer able to switch to say, the
console. Or perhaps another session that I have started up with a
different WM/DE, as the same user.
Any ideas?
--
gentoo-user@gentoo.org mailing list
Hi,
On Thu, 24 Nov 2005 00:23:28 +0600
El Nino [EMAIL PROTECTED] wrote:
please guide me to deploy a gentoo linux server cluster. currently i
have 7 piii 800Mhz machines want to test a cluster server. if
somebody can point me step by step or a good guide, it will very
appreciable.
What kind
Hi,
On Thu, 24 Nov 2005 00:32:49 +0600
El Nino [EMAIL PROTECTED] wrote:
i have to replace our existing wired network to wireless network. so
please help me to deploy a wireless authentication gateway using linux
based open source application which provides a total security solution
for
I'm trying to learn equery since qpkg is being laid to rest. However
I'm finding the hints that appear when you syntax is wrong very
confusing.
Her is an example:
equery files --type vim
Gives the expected results
but if you add a version number things get very confusing
equery files
Wouldn't leaving the CHOST at
i386-pc-linux-gnu build unoptimized binaries?
No.
Alexander Skwar
Thanks for that. My CHOST flag is set to i386-pc-linux-gnu even though
it is not. Just a piece of mind I guess not building unoptimized
binaries.
--
gentoo-user@gentoo.org mailing list
To explain, keep in mind that optimisation and chost are two different
things.
i386 is a lowest common denominator instruction set that will run on
most 386 and above x86 processors. i4/5/686 adds few specialised
instructions and I believe the compiler is able to use them to produce
faster
On Wed, 23 Nov 2005 22:11:27 -0300
Arturo 'Buanzo' Busleiman [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Harry Putnam wrote:
equery files --type =app-editors/vim-6.3
-bash: =app-editors/vim-6.3: No such file or directory
add single quotes, so the
On 11/23/05, Michael Sullivan [EMAIL PROTECTED] wrote:
I wanted to be able to cross compile for one of the machines on my
network. I've been following the cross-compilation guide at
http://dev.gentoo.org/~vapier/CROSS-COMPILE-HOWTO I've been following
the guide exactly. The problem is at
--- Stroller [EMAIL PROTECTED] wrote:
On Nov 23, 2005, at 7:35 pm, maxim wexler wrote:
My .bash_history file stopped being updated on Nov
13
10:06. A look at /var/log/messages for that
particular
time revealed nothing amiss.
Ok... this could be a dumb question, but how much
Nick Rout [EMAIL PROTECTED] writes:
yes its not a biug as such, but a result of the shell you are using,
which interprets as a redirection tool. Perhaps the equery docos
should/examples should say so. If you want it fixed, files bug,
mentioning it here will NOT get it fixed.
Point taken...
On Wed, 2005-11-23 at 20:02 -0600, Harry Putnam wrote:
I'm trying to learn equery since qpkg is being laid to rest. However
I'm finding the hints that appear when you syntax is wrong very
confusing.
I have opened bug #113423
Does the following make more sense to you:
$ ./equery files --type
On Nov 24, 2005, at 3:05 am, maxim wexler wrote:
$ ls -l .bash_history
-rw--- 1 blissfix usb8021 Nov 22 11:31
.bash_history
Is there some sort of chron thingee going off every
nine days?
Maybe you're only logging out every 9 days??
Stroller.
--
gentoo-user@gentoo.org mailing
I think I've somehow managed to screw gcc up. Whenever I try to emerge
anything I get this message:
checking for C compiler default output... configure: error: C compiler
cannot create executables
It also says See config.log for details, but I can't find config.log -
it doesn't give a full
On Wed, 23 Nov 2005 15:34:27 -0500 Allan Gottlieb [EMAIL PROTECTED]
wrote:
| At Tue, 22 Nov 2005 13:17:27 + Ciaran McCreesh
| [EMAIL PROTECTED] wrote:
| The only way you can safely change CHOST is by making new stages
| through catalyst. There're various scripts which *sometimes* fix
| your
Harry Putnam [EMAIL PROTECTED] writes:
!!! Invalid syntax: missing operator
!!! If you want only specific versions please use one of
!!! the following operators as prefix for the package name:
!!! = = =
!!! Example to only match gcc versions greater or equal 3.2:
Also seems you
On Wed, 2005-11-23 at 23:34 -0600, Harry Putnam wrote:
Paul Varner [EMAIL PROTECTED] writes:
It appears here that the symbols themselves must be quoted as well as
the package like this:
equery files --type =vim-6.2
Which is what I meant to convey with the error message. What about
Search forums: many posts exist.
Try using gcc-config and fix_libtool.sh as a starter.
BillK
On Wed, 2005-11-23 at 22:49 -0600, Michael Sullivan wrote:
I think I've somehow managed to screw gcc up. Whenever I try to emerge
anything I get this message:
checking for C compiler default
Am Mittwoch, den 23.11.2005, 16:17 -0500 schrieb Nick Smith:
On 11/23/05, James Hiscock [EMAIL PROTECTED] wrote:
ive been trying to setup a mail server following the how-to
at
Am Mittwoch, den 23.11.2005, 17:28 + schrieb Neil Bothwick:
On Wed, 23 Nov 2005 11:58:40 -0500, Leonard - Gentoo wrote:
Is it possible to send an attachment using the 'mail' command say in a
cronjob? i have a file that i would like sent to me before deleted and
recreated to examine
On Nov 23, 2005, at 2:31 am, Thomas Harold wrote:
Key things to look for in menuconfig for Rocket133 might be:
(D)evice drivers
-- ATA/ATAPI/MFM/RLL support
-- -- SCSI emulation support
-- -- generic/default IDE chipset support
-- -- PCI IDE chipset support
-- -- Generic PCI IDE Chipset
Heinz,
Outstanding.. thanks for the suggestion also..
Regards ..
Leonard
- Original Message -
From: Heinz Sporn [EMAIL PROTECTED]
To: gentoo-user@lists.gentoo.org
Sent: Thursday, November 24, 2005 12:49 AM
Subject: Re: [gentoo-user] mail command and attachment?
Am Mittwoch, den
Thinking of this now.. but qmail is on this same box..
Anyone know off hand the syntax to send a message feeding it to qmail for
delivery to an account on the box?
Regards ..
Leonard
- Original Message -
From: Leonard - Gentoo [EMAIL PROTECTED]
To: gentoo-user@lists.gentoo.org
On 11/23/05, Stroller [EMAIL PROTECTED] wrote:
Unfortunately, if I leave the controller enabled in BIOS then the PC
will attempt to boot from it, and not from the built-in RAID array on
which the operating-system is installed... thus I get a non-sytem disk
or disk error. The CD drive is on an
On Thu, 2005-11-24 at 01:15 -0500, Leonard - Gentoo wrote:
Thinking of this now.. but qmail is on this same box..
Anyone know off hand the syntax to send a message feeding it to qmail for
delivery to an account on the box?
I don't know about qmail, but most of the time you can say
[EMAIL
On 2005-11-23 23:07:49 -0600 (Wed, Nov), Paul Varner wrote:
On Wed, 2005-11-23 at 23:34 -0600, Harry Putnam wrote:
Paul Varner [EMAIL PROTECTED] writes:
It appears here that the symbols themselves must be quoted as well as
the package like this:
equery files --type =vim-6.2
On 2005-11-24 01:15:07 -0500 (Thu, Nov), Leonard - Gentoo wrote:
Thinking of this now.. but qmail is on this same box..
Anyone know off hand the syntax to send a message feeding it to qmail for
delivery to an account on the box?
Maybe
cat message | /var/qmail/bin/qmail-inject -a
74 matches
Mail list logo