Hi,I've recently installed gentoo on a G4 TiBook and it's working fine.However, I have a couple of unresolved problems, one of which being, the system doesn't remember the date. I had entered the correct date when installing, but it always follow the system date instead (the date that
Try hwclock -systohc after you've set your system time. That should
set the hardware clock for you.
-Joe
--
gentoo-ppc-user@gentoo.org mailing list
On Monday 13 February 2006 13:36, Y-Lan Boureau wrote:
Does anyone know a fix to this -- either, how I could set correct time
and date in Open Firmware, or allow Linux to remember its own time and
date ?
The relevant option is in /etc/conf.d/clock :
---
# If you want to set the Hardware
Gilberto Martins wrote:
Most modern BIOS have the option to boot from a lot of devices, you
can check if your BIOS have options to boot from hd1, or primary
slave, whatever your BIOS call it, just enter the SETUP and check for
it.
Yeah, it is already configured to start the first Hard Disk.
Hi all,
I just installed Gentoo on my laptop after having FreeBSD as my desktop
for a long time.
I felt Gentoo would be my best shot at using and enjoying a Linux
distribution for my desktop, as Gentoo promises a lot of freedom and choice.
All up its pretty darn good but I have to say I am a
On Sun, 12 Feb 2006 21:30:13 +0200 Uwe Thiem [EMAIL PROTECTED] wrote:
| while trying to fix some other problems involving revdep-rebuild, I
| stumbled over some ebuilds no longer in portage but still installed
| on my system.
|
| How can I get rid of that stuff? I mean emerge --unmerge
|
On 12 Feb 2006, at 17:40, Maarten wrote:
1) The Gentoo Way says that gentoo shouldn't make that decision
for you.
Nah. I think The Gentoo Way translates to...
After three of four years of using Gentoo my experience is that The
Gentoo Way translates differently depending upon the
Sadin Nurkic wrote:
Hi,
I was just wondering if anyone has any hints as to how to build
ethereal with GTK-1.2 support only and not have GTK2.
When looking at the ebuild it's clear that gtk-1.2 support has been
dropped. The solution to your problem might be to add it and use a
personal
On 12.02, Dan Sheffner wrote:
I'm trying to setup dual nics on my server but I seem to be doing
something wrong. Below is my /etc/conf.d/net
file. As you can see my public address pointing to the web is
70.88.74.105 and the local one is 10.1.10.5. As
soon as I enamble eth1 eth0
Hi,
How and where can I check why it got dropped in the first place? Also,
where can I get more info about how to add a portage overlay - gentoo
wiki/docs?
Regards,
Sadin
On 2/13/06, Nagatoro [EMAIL PROTECTED] wrote:
Sadin Nurkic wrote:
Hi,
I was just wondering if anyone has any hints as
On 13 February 2006 11:11, Ciaran McCreesh wrote:
On Sun, 12 Feb 2006 21:30:13 +0200 Uwe Thiem [EMAIL PROTECTED] wrote:
| while trying to fix some other problems involving revdep-rebuild, I
| stumbled over some ebuilds no longer in portage but still installed
| on my system.
|
| How can I
On 2/13/06, Uwe Thiem [EMAIL PROTECTED] wrote:
On 13 February 2006 11:11, Ciaran McCreesh wrote:
On Sun, 12 Feb 2006 21:30:13 +0200 Uwe Thiem [EMAIL PROTECTED] wrote:
| while trying to fix some other problems involving revdep-rebuild, I
| stumbled over some ebuilds no longer in portage but
I will try change the file and I got in touch about what happens
On 2/12/06, Harm Geerts [EMAIL PROTECTED] wrote:
On Monday 13 February 2006 03:26, Allan Spagnol Comar wrote:
Hi all,
I had installed lm_sensors and kernel modules, now when I run sensors
command I got:
monstro ~ #
-Original Message-
From: Urs Schuetz [mailto:[EMAIL PROTECTED]
Sent: 11 February 2006 20:52
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] X without console log window?
On Sat, 11 Feb 2006, Hans-Werner Hilse wrote:
Hi,
On Fri, 10 Feb 2006 19:08:25 -0200
Hello,
I'm having some problems emergeing app-arch/rpm on Gentoo Vserver. After
emerge rpm I get:
Calculating dependencies /
!!! All ebuilds that could satisfy =sys-apps/baselayout-1.11.14 have been
masked.
!!! One of the following masked packages is required to complete your request:
-
On Monday 13 February 2006 11:04, Moshe Kaminsky wrote:
You can use extended attributes for this. See getfattr(1) and attr(5)
from sys-apps/attr.
Quoting the man page for attr:
Extended attributes implement the ability for a user to attach name:value
pairs to objects within the _XFS_
2006/2/13, Maarten [EMAIL PROTECTED]:
You're pointing the kernel to hdb1 as the system root partition. I bet
money hdb1 isn't; it's /boot. So point it to the hdb[2|3|4|...] which is
your main / partition, and all will be well.
So good I haven't bet, for I'd loose. 8)
Making this change solved
Hello,
I have a small query. I wonder what the temp3 in the output of sensors is? I
have been having problems with the computer shutting down due to over
heating. Here's my current sensors output:
M/B Temp:+42°C (high = +16°C, hyst =+0°C) sensor = thermistor
CPU Temp: +36.0°C
On Monday 13 February 2006 13:04, Gilberto Martins wrote:
So good I haven't bet, for I'd loose. 8)
Making this change solved the problem. Seems that grub works, but
there is something I am not doing the right way.
1) Did you mean Lilo instead of Grub works??
2) Did you try root(hd1,0) with
Michael Vince wrote:
Hi all,
I just installed Gentoo on my laptop after having FreeBSD as my
desktop for a long time.
I felt Gentoo would be my best shot at using and enjoying a Linux
distribution for my desktop, as Gentoo promises a lot of freedom and
choice.
All up its pretty darn good but
Sadin Nurkic wrote:
Hi,
How and where can I check why it got dropped in the first place?
Try searching mailing lists and looking at the Chanelog.
Also,
where can I get more info about how to add a portage overlay - gentoo
wiki/docs?
Hi,
On Mon, 13 Feb 2006 11:24:25 -
Michael Kintzios [EMAIL PROTECTED] wrote:
On Fri, 10 Feb 2006 19:08:25 -0200
Urs Schuetz [EMAIL PROTECTED] wrote:
Everytime when I startup my computer, in X apears a minimized
Console Log window icon.
[...]
What's the purpose of
Hi again.
2006/2/13, Bo Andresen [EMAIL PROTECTED]:
On Monday 13 February 2006 13:04, Gilberto Martins wrote:
So good I haven't bet, for I'd loose. 8)
Making this change solved the problem. Seems that grub works, but
there is something I am not doing the right way.
1) Did you mean Lilo
* Mrugesh Karnik [EMAIL PROTECTED] [13/02/06 14:15]:
On Monday 13 February 2006 11:04, Moshe Kaminsky wrote:
You can use extended attributes for this. See getfattr(1) and attr(5)
from sys-apps/attr.
Quoting the man page for attr:
Extended attributes implement the ability for a user
Hi all.
Now I have only one problem: the ethernet module. During the
initiatio, I have the following message: Failed to load 3c59x. Of
course I had no network for this.
I tried lsmod and saw that no modules were loaded. What shoud I do
to configure the loading of needed modules at startup ?
Mrugesh Karnik mrugeshkarnik at gmail.com writes:
I have a small query. I wonder what the temp3 in the output of sensors is?
I
have been having problems with the computer shutting down due to over
heating. Here's my current sensors output:
M/B Temp:+42°C (high = +16°C, hyst =
Hi all, I am running my box on a AMD64 with an ATI X300 pci express video board.
I don´t know if here is the place to ask for it but my problem is with
the video board module distributed by ATI, when I use the module the
xorg works correctly but if I change to text mode I can not return to
Hi all,
I've recently built a new gentoo box and I noticed that the emerge
--sync is lightning fast compared to an emerge --sync on the older
boxes, even though both the new and older boxes are up to date and have
almost identical world files / versions. Is there a way I can delete
and recreate
ps - all the boxes have identical /etc/make.conf files and file systems
/ hardware as well
---
Chris Covington
IT
Plus One Health Management
75 Maiden Lane Suite 801
NY, NY 10038
646-312-6269
http://www.plusoneactive.com
--
gentoo-user@gentoo.org mailing list
I just tried compiling truecrypt newest version 4.1 and cannot get it
working or make enough sense out of errors to debug.
Since it is OT (not available in portage, but is available as source)
I'm just asking if anyone is using it... if so maybe reply privately.
--
gentoo-user@gentoo.org
-Original Message-
From: Gilberto Martins [mailto:[EMAIL PROTECTED]
Sent: 13 February 2006 13:16
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Re: Problems with GRUB in the
installation of Gentoo
Hi again.
2006/2/13, Bo Andresen [EMAIL PROTECTED]:
On
-Original Message-
From: Hans-Werner Hilse [mailto:[EMAIL PROTECTED]
Sent: 13 February 2006 12:34
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] X without console log window?
What's the purpose of this window? What is it meant to log
- as far as
I can tell it
firefox + flash used to be troublesome with transparency. are you
using transparency?
On 2/11/06, Tim Igoe [EMAIL PROTECTED] wrote:
Tim Igoe wrote:
Iain Buchanan wrote:
If you're having flash / firefox problems, upgrade firefox to 1.5.0.1!
On Tue, 2006-02-07 at 20:28 +0930, Iain
Hey all.
Want to make ogg's out of my CD's, but don't want to have to download a
zillion GUI's/libraries ala KDE or GNOME. I love fluxbox, so something
that works in console would even be great!
What's your fave?
--
Princess Leia:
Darth Vader. Only you could be so bold.
--
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Covington, Chris wrote:
Hi all,
I've recently built a new gentoo box and I noticed that the emerge
--sync is lightning fast compared to an emerge --sync on the older
boxes, even though both the new and older boxes are up to date and have
almost
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Zac Medico wrote:
You can delete the whole cache with `rm -rf /var/cache/edb/*`.
Actually, that's wrong, please don't do that. It's `rm -rf
/var/cache/edb/dep/*`. Sorry. :)
Zac
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.2 (GNU/Linux)
On 2/13/06, Jeff [EMAIL PROTECTED] wrote:
Hey all.
Want to make ogg's out of my CD's, but don't want to have to download a
zillion GUI's/libraries ala KDE or GNOME. I love fluxbox, so something
that works in console would even be great!
What's your fave?
abcde ( a better cd encoder ) is a
On Monday 13 February 2006 17:39, Jeff wrote:
Hey all.
Want to make ogg's out of my CD's, but don't want to have to download a
zillion GUI's/libraries ala KDE or GNOME. I love fluxbox, so something
that works in console would even be great!
What's your fave?
media-sound/vorbis-tools
Now, after rebooting, it really went straight, with text menu. It
starts loading really fast the system,but all of a sudden, a Kernel
Panic says:
Warning - Unable to open an initial console
Kernel panic - not suncing: No init found. Try passing init= option to kernel
This message usually
On Monday 13 February 2006 16:39, Jeff wrote:
Hey all.
Want to make ogg's out of my CD's, but don't want to have to download a
zillion GUI's/libraries ala KDE or GNOME. I love fluxbox, so something
that works in console would even be great!
What's your fave?
I use abcde:
On Monday 13 February 2006 18:39, Jeff wrote:
Hey all.
Want to make ogg's out of my CD's, but don't want to have to download a
zillion GUI's/libraries ala KDE or GNOME. I love fluxbox, so something
that works in console would even be great!
What's your fave?
--
Princess Leia:
On Mon, Feb 13, 2006 at 11:39:13AM -0500, Penguin Lover Jeff squawked:
Hey all.
Want to make ogg's out of my CD's, but don't want to have to download a
zillion GUI's/libraries ala KDE or GNOME. I love fluxbox, so something
that works in console would even be great!
What's your fave?
-Original Message-
From: Boyd Stephen Smith Jr. [mailto:[EMAIL PROTECTED]
Sent: 13 February 2006 01:32
To: gentoo-user@lists.gentoo.org
Subject: Re: [gentoo-user] Max Number of Partitions
Um, activate the vg in partial mode and lvols on the good
disk will still
be
On 2/12/2006 8:01 PM Harry Putnam wrote:
Drew Tomlinson [EMAIL PROTECTED] writes:
The time server is a FreeBSD 6.0 box on my network. My other FreeBSD
box and two Windows boxes get time from it just fine. Even the Gentoo
box will set its clock with ntpd -gq. I am currently using this
Richard Fish wrote:
Now, after rebooting, it really went straight, with text menu. It
starts loading really fast the system,but all of a sudden, a Kernel
Panic says:
Warning - Unable to open an initial console
Kernel panic - not suncing: No init found. Try passing init= option to kernel
This
Is there a plug-in for Firefox like user agent switcher that would
automatically switch the agent whenever I fist certain web-page?
If I remember correctly there was one switcher like this for Mozilla but
in Firefox it works differently.
--
#Joseph
--
gentoo-user@gentoo.org mailing list
Hi,
On Mon, 13 Feb 2006 14:23:20 -
Michael Kintzios [EMAIL PROTECTED] wrote:
That depends. It usually just outputs what is piped into
/dev/xconsole.
[...]
Would you mind showing a default/typical/custom (whatever) config file
so that I can compare with mine?
No problem. But it's
Michael Kintzios wrote:
Two quick Q's:
Current partitions 1, 13, 14, 15 and 16 are NTFS. As I understand it
LVM is a software solution that works happily with Linux.
Yes. And only Linux - meaning, that if you'd boot
FreeBSD or Solaris, you won't be able to use your
filesystems.
What
Jeff wrote:
Want to make ogg's out of my CD's,
I like Grip very much.
Alexander Skwar
--
One can search the brain with a microscope and not find the
mind, and can search the stars with a telescope and not find God.
-- J. Gustav White
--
gentoo-user@gentoo.org mailing list
Hi,
@Ian
Xvidtune doesn't work for me, it is not only the displacement in all
directions (mainly horizontally), additionally the picture is not sharp
in some places.
@All
Isn't there another solution out there, i have updated my kernel many
times before and it always works, i think there must be
Cláudio Henrique wrote:
firefox + flash used to be troublesome with transparency. are you
using transparency?
Nope, tried it and gave up due to lack of usefulness from the ATi
drivers when fluff mode was on.
On 2/11/06, Tim Igoe [EMAIL PROTECTED] wrote:
Tim Igoe wrote:
Iain
Hi,
does anyone have a clue?
Thank you.
Daniel Pielmeier schrieb:
Hello,
after the last sync portage wants to reinstall transcode with new use
flags.
These are the packages that I would merge, in order:
Calculating world dependencies
!!! Packages for the following atoms are either all
I have this server at work, it has been running ok for a long time,
but I'd like to install some new apps to it, but I have a strongly
configured firewall (no rsync) and emerge-webrsync seems to fail every
time.
Is there another way to update portage tree? For my first update I
downloaded the
Le 13 février à 17:39:13 Jeff [EMAIL PROTECTED] écrit notamment:
Hey all.
Want to make ogg's out of my CD's, but don't want to have to download a
zillion GUI's/libraries ala KDE or GNOME. I love fluxbox, so something
that works in console would even be great!
What's your fave?
[...]
have
On Mon, 13 Feb 2006, Gilberto Martins wrote:
Hi all.
Now I have only one problem: the ethernet module. During the
initiatio, I have the following message: Failed to load 3c59x. Of
course I had no network for this.
I tried lsmod and saw that no modules were loaded. What shoud I do
to configure
On Monday 13 February 2006 19:40, Daniel da Veiga wrote:
I have this server at work, it has been running ok for a long time,
but I'd like to install some new apps to it, but I have a strongly
configured firewall (no rsync) and emerge-webrsync seems to fail every
time.
Is there another way to
On Monday 13 February 2006 19:03, Joseph wrote:
Is there a plug-in for Firefox like user agent switcher that would
automatically switch the agent whenever I fist certain web-page?
If I remember correctly there was one switcher like this for Mozilla but
in Firefox it works differently.
abcde works like a charm. Thanks all for your input.
:-)
Jean Magnan de Bornier wrote:
Le 13 février à 17:39:13 Jeff [EMAIL PROTECTED] écrit notamment:
Hey all.
Want to make ogg's out of my CD's, but don't want to have to download a
zillion GUI's/libraries ala KDE or GNOME. I love fluxbox,
Zac Medico wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Zac Medico wrote:
You can delete the whole cache with `rm -rf /var/cache/edb/*`.
Actually, that's wrong, please don't do that. It's `rm -rf
/var/cache/edb/dep/*`. Sorry. :)
Zac
-BEGIN PGP SIGNATURE-
Version:
I remember there was some kind of user agent for Mozilla (before
firefox) that worked per url basis.
Anyhow, the current user agent doesn't help me. I can seem to fool
Canada Post web-loging screen with Firefox - user agent (it display
log-in screen) but when I try to create an account it'll not
It didn't help me :( still crash soemtimes on flash movies. Sometimes
it works, but others it just locks firefox up, only way out of it is
to kill it and remove flash. Annoying, but not the end of the world.
kill all apps which use your OSS audio device /dev/dsp. I guess some
soundserver is
On 2/13/06, Daniel da Veiga [EMAIL PROTECTED] wrote:
I have this server at work, it has been running ok for a long time,
but I'd like to install some new apps to it, but I have a strongly
configured firewall (no rsync) and emerge-webrsync seems to fail every
time.
Is there another way to
On 2/13/06, Drew Tomlinson [EMAIL PROTECTED] wrote:
Anyway, I really appreciate your thoughts. Because this box runs
MythTV, time is *VERY* important. Imagine my surprise when I went to
watch the first day of the Olympics on to find out that my recordings
were off by over an hour and half.
On Monday 13 February 2006 20:56, Joseph wrote:
I remember there was some kind of user agent for Mozilla (before
firefox) that worked per url basis.
Anyhow, the current user agent doesn't help me. I can seem to fool
Canada Post web-loging screen with Firefox - user agent (it display
log-in
Hey Mark.
I'd also like to pitch in here.
Since about two weeks ago, my machines are no longer keeping time as
well. I'm getting errors when my systems boot during sysinit - the clock
script fails miserably, and some systems it forces me into console to
try and correct the problem.
I'm not sure
If your system stopped suddenly the ntp.drfit file may have become corrupted.
As I understand it this file has a value in it that tells the system how much
drift there is in the system clock, and uses the figutre to compensate. If the
figure is way out then the compensation will be way out.
btw: nvidia-kernel-1.0.8178-r3
mozilla-firefox-bin-1.5.0.1
xorg-server-1.0.1-r2
mozilla-thunderbird-1.5-r1
Catalin Trifu wrote:
Hi,
On my Dell P4 3.06Ghz, 1.2GB RAM (1GB swap), Nvidia Go5200 and with shiny
suspend2-sources-2.6.15-r5, modular
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Gogiel wrote:
Zac Medico wrote:
Zac Medico wrote:
You can delete the whole cache with `rm -rf /var/cache/edb/*`.
Actually, that's wrong, please don't do that. It's `rm -rf
/var/cache/edb/dep/*`. Sorry. :)
Zac
Oops. I've already
I solved this problem myself, it was just a syntax failure in
/etc/portage/package.use
--
gentoo-user@gentoo.org mailing list
Answer is at the bottom
On 2/13/06, Jeff [EMAIL PROTECTED] wrote:
Hey Mark.
I'd also like to pitch in here.
Since about two weeks ago, my machines are no longer keeping time as
well. I'm getting errors when my systems boot during sysinit - the clock
script fails miserably, and some systems
Hi,
I just wasted an hour so I thought maybe I could save someone else
the problems. The new MythTV 0.19 rev that's out in portage doesn't
work with an older mythbackend server running version 0.18. Apparently
you have to update both ends at the same time. Of course portage is
not smart enough
Hi All,
For some reason when I reply or create a new message in Kmail the dynamic
spellchecking is disabled. I get a notification message in the status bar
at the bottom of the message window saying:
==
As-you-type spell checking is disabled.
Mick wrote:
For some reason when I reply or create a new message in Kmail the
dynamic spellchecking is disabled.
Ctrl+N, Alt+O, A.
(New Message, Options, Auto.Spell. -- it remembers the setting.)
Benno
--
gentoo-user@gentoo.org mailing list
On Mon, 2006-02-13 at 19:27 +0100, Daniel Pielmeier wrote:
Hi,
@Ian
Xvidtune doesn't work for me, it is not only the displacement in all
directions (mainly horizontally), additionally the picture is not sharp
in some places.
hmm, strange.
@All
Isn't there another solution out there, i
On Mon, 2006-02-13 at 12:09 -0300, Allan Spagnol Comar wrote:
Hi all, I am running my box on a AMD64 with an ATI X300 pci express video
board.
I don´t know if here is the place to ask for it but my problem is with
the video board module distributed by ATI, when I use the module the
xorg
Harm Geerts wrote:
On Monday 13 February 2006 20:56, Joseph wrote:
I remember there was some kind of user agent for Mozilla (before
firefox) that worked per url basis.
Anyhow, the current user agent doesn't help me. I can seem to fool
Canada Post web-loging screen with Firefox - user agent
Alexander Skwar wrote:
Michael Kintzios wrote:
How does this work in an LVM set up?
Filesystems don't see that they are on logical
volumes. This means, that the filesystem fragmentation
will happen just as as it normally does.
If I read you right, then /usr will behave the same with
Hans-Werner Hilse wrote:
No problem. But it's from a debian system... From /etc/syslog.conf:
---snip---
# The named pipe /dev/xconsole is for the `xconsole' utility. To use it,
# you must invoke `xconsole' with the `-file' option:
#
#$ xconsole -file /dev/xconsole [...]
#
# NOTE:
Welcome to my post, and remember to leave your flamewars at the door :)
I've just installed KDE for the first time in a couple of years. It
seems to have come a long way.
However, I have some eye candy I want to bring from Gnome - transparent
konsole is the first.
Secondly, I start konsole
Hello to everybody,
Since some day I get this error while starting Gnome:
GConf Error: Error contactiong the configuration server; it may be
necessary to enable necessario TCP/IP support for ORBit or there may be
an old NFS lock due to system crash. Please see
On Tuesday 14 February 2006 00:35, Iain Buchanan wrote:
Welcome to my post, and remember to leave your flamewars at the door :)
I've just installed KDE for the first time in a couple of years. It
seems to have come a long way.
However, I have some eye candy I want to bring from Gnome -
On Monday 13 February 2006 08:54, Michael Kintzios
[EMAIL PROTECTED] wrote about 'RE: [gentoo-user] Max Number
of Partitions':
Current partitions 1, 13, 14, 15 and 16 are NTFS. As I understand it
LVM is a software solution that works happily with Linux. What happens
when my other half
Hallo,
I'm running a compiled from source Open Office 2.01 (stable branch), and
am having problems getting Open Office to accept input single and double
quote characters.
I have CFLAGS=-O2 -march=pentium4 -pipe -fomit-frame-pointer and
LINGUAS=en en_GB in my /etc/make.conf Nothing startling
On 2/13/06, Christoph Eckert [EMAIL PROTECTED] wrote:
It didn't help me :( still crash soemtimes on flash movies. Sometimes it works, but others it just locks firefox up, only way out of it is to kill it and remove flash. Annoying, but not the end of the world.
kill all apps which use your OSS
On Sunday 12 February 2006 20:58, Ow Mun Heng [EMAIL PROTECTED] wrote
about '[gentoo-user] is iptables needed on a Bridge':
Just got a bridge setup to put in to monitor network traffic. I wonder
if there's a need to put in iptables/ebtables into it.
While I have seen iptables rules like
actually the SMP is working, as in top shows 2 CPU's. but when i do
an emerge --sync CPU1 stays pegged at 99% and CPU0 stays below 1% the
entire time. this is a dual 200mhz U2 Sparc system, i was just
wondering if this was normal or is there something messed up in my
config?
and sorry for
Nick Smith wrote:
actually the SMP is working, as in top shows 2 CPU's. but when i do
an emerge --sync CPU1 stays pegged at 99% and CPU0 stays below 1% the
entire time. this is a dual 200mhz U2 Sparc system, i was just
wondering if this was normal or is there something messed up in my
config?
On Mon, 2006-02-13 at 19:58 -0500, Nick Smith wrote:
actually the SMP is working, as in top shows 2 CPU's. but when i do
an emerge --sync CPU1 stays pegged at 99% and CPU0 stays below 1% the
entire time. this is a dual 200mhz U2 Sparc system, i was just
wondering if this was normal or is
I am using 2.6.15-r4, and 8.22.15 ati driver
can some thing with frame buffer ?
On 2/13/06, Iain Buchanan [EMAIL PROTECTED] wrote:
On Mon, 2006-02-13 at 12:09 -0300, Allan Spagnol Comar wrote:
Hi all, I am running my box on a AMD64 with an ATI X300 pci express video
board.
I don´t
On Mon, 2006-02-13 at 23:39 -0200, Allan Spagnol Comar wrote:
I am using 2.6.15-r4, and 8.22.15 ati driver
can some thing with frame buffer ?
what framebuffer are you using? vesafg, vesafb-tng, or one of the
kernel ati-framebuffers?
(you could try this command)
$ grep FB
Well it works, thanks !!!
On 2/13/06, Allan Spagnol Comar [EMAIL PROTECTED] wrote:
I will try change the file and I got in touch about what happens
On 2/12/06, Harm Geerts [EMAIL PROTECTED] wrote:
On Monday 13 February 2006 03:26, Allan Spagnol Comar wrote:
Hi all,
I had installed
That warning, yes.
But the error right after that means what it says: No init found, ie. it
has mounted a filesystem (else you get another error-: Kernel panic -
cannot mount root partition) but it is unable to find 'init' there.
From that, one can deduce the OP probably pointed the kernel to
Boot from the live CD, mount your root, and do:
cp -a /dev/console /dev/null /dev/zero /mnt/gentoo/dev/
Hum ..
Shouldn`t it already exist ? Why should I have to copy it ? What can
cause this absence ?
Thanks
--
gentoo-user@gentoo.org mailing list
On Monday 13 February 2006 20:29, James wrote:
Well I'm not sure, but you can 'emerge hddtemp' and verify the hard drive
temperature quite easily.
hddtemp /dev/hda for example
/dev/hda: HTS726060M9AT00: 44 C
Oh I'll do that, thanks.
Mrugesh
--
gentoo-user@gentoo.org mailing list
On 2/13/2006 12:22 PM Mark Knecht wrote:
On 2/13/06, Drew Tomlinson [EMAIL PROTECTED] wrote:
Anyway, I really appreciate your thoughts. Because this box runs
MythTV, time is *VERY* important. Imagine my surprise when I went to
watch the first day of the Olympics on to find out that my
On 2/13/2006 1:11 PM Nick Rout wrote:
If your system stopped suddenly the ntp.drfit file may have become corrupted.
As I understand it this file has a value in it that tells the system how much
drift there is in the system clock, and uses the figutre to compensate. If the
figure is way out
jpilot does not compile, anyone knows why?
here is the error output:
This package is configured for the following features:
--
Compiling Expense plugin... yes
Compiling SyncTime plugin.. yes
Compiling KeyRing
On Monday 13 February 2006 10:39 am, Jeff wrote:
Hey all.
Want to make ogg's out of my CD's, but don't want to have to download a
zillion GUI's/libraries ala KDE or GNOME. I love fluxbox, so something
that works in console would even be great!
What's your fave?
cdmp3
There is an ebuild in bugzilla.
On 2/13/06, Harry Putnam [EMAIL PROTECTED] wrote:
I just tried compiling truecrypt newest version 4.1 and cannot get it
working or make enough sense out of errors to debug.
Since it is OT (not available in portage, but is available as source)
I'm just asking
On 2/13/06, Gilberto Martins [EMAIL PROTECTED] wrote:
Hum ..
Shouldn`t it already exist ? Why should I have to copy it ? What can
cause this absence ?
Not likely to happen during installation, but if you use udev, the
device nodes may not exist in your backups (depending upon how you do
your
1 - 100 of 105 matches
Mail list logo