Hi,
I have an older gentoo systen which accumulated some cruft over the time
- I have to clean it up :-)
I want to list all installed SLOTTED packages where more than one
version is installed. The old (deprecated) qpkg had the option --dups.
What is the new! shiny! way of doing that?:-)
TIA,
Walter Dnes wrote:
The
most recent change on my system was the upgrade to gcc 4.1.1, and the
accompanying rebuild of system and world, a few days ago.
It's due to the baselayout update. There's a typo in /etc/conf.d/rc that
was fixed a few days ago. Change the following line:
On Tuesday 19 September 2006 08:09, Wolfgang Liebich wrote:
Hi,
I have an older gentoo systen which accumulated some cruft
over the time - I have to clean it up :-)
I want to list all installed SLOTTED packages where more than
one version is installed. The old (deprecated) qpkg had the
* Richard Fish [EMAIL PROTECTED] [2006-09-19 02:43] :
You said you have been trying paths like:
ipp://lightning/ipp
ipp://lightning/ipp/port1
Neither is correct [1]. If the printer is named HP on the server,
the correct paths would be:
ipp://lightning/printers/HP
or
Hi,
From: Neil Bothwick [mailto:[EMAIL PROTECTED]
On Mon, 18 Sep 2006 08:43:21 -0700, Richard Fish wrote:
You can pull the ebuilds out of /var/db/pkg/ on your old system and
put them in your local overlay.
Be aware that /var/db/pkg only contains the ebuilds, not any other files
needed from
On Tuesday 19 September 2006 00:48, Mark Knecht wrote:
At this point I believe I'm supposed to set up IPP printing on the
remote machines but everything I've tried there results in messages
about the printer not being found, not responding, not existing, etc.
I'm telling CUPS that it's an
On Mon, 18 Sep 2006 21:12:13 +0100, Mick wrote:
/etc/issue sets the login output. A \o in there is replaced by the NIS
domain, \O by the DNS domain.
# cat /etc/issue
This is \n.\O (\s \m \r) \t
So, it should read my DNS domain name. But it doesn't.
Unlike Alex's earlier example
On Tue, 19 Sep 2006 10:02:43 +0200, Liebich, Wolfgang wrote:
Be aware that /var/db/pkg only contains the ebuilds, not any other
files needed from /usr/portage, such as patches, so this only works
for a limited number of packages.
Another idea - would it be a good idea to quickpkg the 1.3
On 9/18/06, Wolfgang Liebich [EMAIL PROTECTED] wrote:
Hi,I have an older gentoo systen which accumulated some cruft over the time- I have to clean it up :-)I want to list all installed SLOTTED packages where more than oneversion is installed. The old (deprecated) qpkg had the option --dups.
What
Hi,
I've setup a new gentoo system. I plan to use the monitor of a SUN
workstation (a Sun 40x30cm RGB monitor - I don't know more) with it.
The PC has an Intel 945G/GZ Express Integrated Graphics Controller.
Is it possible to use a SUN monitor with this graphics cars? Which
special settings do I
Statux wrote:
I am building a system which has the Unichrome Pro IGP video
chipset (Via P4M800 Northbridge) and I cannot for the life of me
get the via driver for Xorg 7.x to work.
You mean x11-drivers/xf86-video-via-0.1.33.2 ? It's far too old for
the 800 chips. And openchrome doesn't do
On Tue, 19 Sep 2006 11:13:22 +0200
Wolfgang Liebich [EMAIL PROTECTED] wrote:
Hi,
I've setup a new gentoo system. I plan to use the monitor of a SUN
workstation (a Sun 40x30cm RGB monitor - I don't know more) with it.
The PC has an Intel 945G/GZ Express Integrated Graphics Controller.
Is it
On 9/19/06, David Grant [EMAIL PROTECTED] wrote:
On 9/18/06, Wolfgang Liebich [EMAIL PROTECTED] wrote:
Hi,
I have an older gentoo systen which accumulated some cruft over the time
- I have to clean it up :-)
I want to list all installed SLOTTED packages where more than one
version is
2006/9/19, Wolfgang Liebich [EMAIL PROTECTED]:
Hi,
I have an older gentoo systen which accumulated some cruft over the time
- I have to clean it up :-)
I want to list all installed SLOTTED packages where more than one
version is installed. The old (deprecated) qpkg had the option --dups.
What is
Thanks, I will try it with udept
winmail.dat
On 9/18/06, Mark Knecht [EMAIL PROTECTED] wrote:
On 9/18/06, Sarpy Sam [EMAIL PROTECTED] wrote:
SNIP
Maybe port 631 will work here, I have it set to Listen *.631
Changed it to
Listen *:631
and restarted CUPS on the server.
SNIP
On the client mahines you want to comment out the listen
2006/9/19, Wolfgang Liebich [EMAIL PROTECTED]:
Hi,
I have an older gentoo systen which accumulated some cruft over the time
- I have to clean it up :-)
I want to list all installed SLOTTED packages where more than one
version is installed. The old (deprecated) qpkg had the option --dups.
On Tue, 19 Sep 2006 09:26:16 +0100
Mick [EMAIL PROTECTED] wrote:
On Tuesday 19 September 2006 00:48, Mark Knecht wrote:
At this point I believe I'm supposed to set up IPP printing on the
remote machines but everything I've tried there results in messages
about the printer not being
Hello!
We have a file server, and there are a common directory for a group of a
users. I set this common folder's permission to 2775 and that results that a
newly created file or directory will have the same goup owner as the common
dir. But the problem is, that if someone creates a file or a
Hi folks,
I've seen my ntpd process is sometimes dying over night.
To restart it, i have to remove the lockfile in /var/lib/init.d
manually.
This happens from time to time.
Does anyone else have this problem ?
cu
--
-
Stefán István wrote:
Is there any way to tell
the Linux to automatically set the rights to 664 or 775 in this common
directory (and only in this)?
This is normally done by setting the umask to 002 instead of 022 for all
users (in /etc/profile), and creating a separate primary group for every
On Tuesday 19 September 2006 13:53, Stefán István wrote:
We have a file server, and there are a common directory for a
group of a users. I set this common folder's permission to
2775 and that results that a newly created file or directory
will have the same goup owner as the common dir. But
Hi,
On Tue, Sep 19, 2006 at 01:53:13PM +0200, Stefán István wrote:
We have a file server, and there are a common directory for a group of a
users. I set this common folder's permission to 2775 and that results that a
newly created file or directory will have the same goup owner as the
Neil Bothwick wrote:
Have you set the dns_domain in conf.d/net?
I have tried this and it does NOT work.
I'm afraid it gives nothing!
It sounds like dns_domain is not set.
Considering that I have tried it ... I know it not to work, so I have
little doubt
Alan McKinnon wrote:
I'm not sure why you want to do this or what your line of
reasoning is. A stage 1 gentoo install is very similar to
building LFS, except that you don't have to type './configure
make sudo make install' 300 times. Well, conceptually
similar at least.
The whole point of LFS
On 9/18/06, Richard Fish [EMAIL PROTECTED] wrote:
Yeah, that's the right thing to do at this point. My guess is that
llibmysqlclient.so will move to /lib along with every other library
that might possibly be needed at boot time, and a symlink will appear
in /usr/lib for it.
Tried that too :)
On 19 September 2006 04:38, Kevin O'Gorman wrote:
I've been writing a modest amount of HTML/XHTML by hand with vim for
some time because
a) MSWord results are just too ugly to countenance
b) OOffice output, while better is still ugly and behaves badly around
style sheets.
c) I can.
I'm
Uwe Thiem wrote:
On 19 September 2006 04:38, Kevin O'Gorman wrote:
I've been writing a modest amount of HTML/XHTML by hand with vim for
some time because
a) MSWord results are just too ugly to countenance
b) OOffice output, while better is still ugly and behaves badly around
style sheets.
[snip]
You mean x11-drivers/xf86-video-via-0.1.33.2 ? It's far too old for
the 800 chips. And openchrome doesn't do regular releases (see
https://bugs.gentoo.org/show_bug.cgi?id=147425) so if you want it
working, you'll need to build from SVN.
Well that explains that.
Hi folks,
can someone with enough karma delete the person below from the list? I get
that notification for each message I send.
Funny enough, we are in the same country. Do others get it as well?
Thanks!
Uwe
-- Forwarded Message --
Subject: Delivery Status Notification
On 9/18/06, Sarpy Sam [EMAIL PROTECTED] wrote:
So far this looks OK. However, if I go into the CUPS manager on the
client and try to print a test page it's telling me the printer is not
available.
Any ideas? I guess you can print a test page from within the CUPS
manager on the client?
I
* Uwe Thiem [EMAIL PROTECTED] [2006-09-19 16:00] :
Hi folks,
can someone with enough karma delete the person below from the list? I get
that notification for each message I send.
Funny enough, we are in the same country. Do others get it as well?
Thanks!
Uwe
Delivery to the
On 9/19/06, Stefan Wimmer [EMAIL PROTECTED] wrote:
Is it possible to ban this person so easily?
bugs.gentoo.org is the right place to report this.
http://bugs.gentoo.org/show_bug.cgi?id=147673
-Richard
--
gentoo-user@gentoo.org mailing list
On Tue, 19 Sep 2006 18:40:20 +0200, Uwe Thiem wrote:
Hi folks,
can someone with enough karma delete the person below from the list? I get
that notification for each message I send.
Funny enough, we are in the same country. Do others get it as well?
Yup. I got the bounce, too.
--
Peter
On Tuesday 19 September 2006 11:13, Wolfgang Liebich wrote:
Hi,
I've setup a new gentoo system. I plan to use the monitor of a SUN
workstation (a Sun 40x30cm RGB monitor - I don't know more) with
it. The PC has an Intel 945G/GZ Express Integrated Graphics
Controller. Is it possible to use a
How to add user and limit program availability (even from the command
line)?
I would like my daughter to learn latex but if I give her access to my
PC she will be using OpenOffice. Basically I only want here to use
programs that I select/approve.
--
#Joseph
--
gentoo-user@gentoo.org mailing
On Tuesday 19 September 2006 11:46, Liebich, Wolfgang wrote:
2006/9/19, Wolfgang Liebich [EMAIL PROTECTED]:
Hi,
I have an older gentoo systen which accumulated some cruft over the time
- I have to clean it up :-)
I want to list all installed SLOTTED packages where more than one
version
On 9/19/06, Alon Keren [EMAIL PROTECTED] wrote:
Alan McKinnon wrote:
I'm not sure why you want to do this or what your line of
reasoning is. A stage 1 gentoo install is very similar to
building LFS, except that you don't have to type './configure
make sudo make install' 300 times. Well,
On Tuesday 19 September 2006 13:51, Thomas T. Veldhouse wrote:
Neil Bothwick wrote:
Have you set the dns_domain in conf.d/net?
I have tried this and it does NOT work.
Yes, I have made several attempts to set it up in the /etc/conf.d/net, inc.:
dns_domain=STUDY
dns_domain_lo=STUDY
On 9/19/06, Alon Keren [EMAIL PROTECTED] wrote:
My aim is to have the ability to regularly build and maintain
completely customized Linux systems.
This should be possible by using your own local portage tree (probably
based initially on Gentoo's tree) that you update somewhat manually
with
Hi,
For some reason my son's machine has started turning on net.eth0
recently. For the last few days it seems to turn on when he boots even
though I'm not enabling it in rc-update. Granted, I was lazy and made
them both 192.168.1.59 so that I wouldn't have any trouble finding him
no matter
On Tue, 19 Sep 2006 13:40:30 -0700, Mark Knecht wrote:
How can I keep net.eth0 off unless I turn it on by hand? I am not
loading forcedeth explicitly but it's getting loaded anyway.
See the RC_PLUG_SERVICES section of /etc/conf.d/rc
--
Neil Bothwick
The truth shall make you free, but
Mark Knecht wrote:
How can I keep net.eth0 off unless I turn it on by hand? I am not
loading forcedeth explicitly but it's getting loaded anyway.
Set the following variable in /etc/conf.d/rc:
RC_PLUG_SERVICES=!net.*
This will disable hotplugging for all network interfaces. If you only
On 9/19/06, Mick [EMAIL PROTECTED] wrote:
Hmm, why do I have two gnupg's, can I umerge the earliest of them?
=
[I--] [ ] app-crypt/gnupg-1.4.5 (0)
[I--] [ ] app-crypt/gnupg-1.9.20-r3 (1.9)
=
From the
Hi all,
A couple of weeks ago xmms stopped recognizing m4a/mp4 files, and instead of
playing them it just opened up the file dialogue, as it does with all files
it doesn't recognize. Today I finally looked into why this may be happening.
Now, as best as I can tell the way to enable this is to
Can the new baselayout handle multiple networks seamlessly?
I currently connect to multiple networks using a laptop with an ipw2200
wireless and a built in NIC consisting of:
NIC, fixed IP
NIC, DHCP
NIC, DHCP and openvpn
NIC, DHCP and CiscoVPN
wireless with wpa/tkip
wireless with wpa/tkip and
Joseph wrote:
How to add user and limit program availability (even from the command
line)?
I would like my daughter to learn latex but if I give her access to my
PC she will be using OpenOffice. Basically I only want here to use
programs that I select/approve.
Don't. Your daughter must be
quoth the Wolfgang Illmeyer:
Am Mittwoch, 20. September 2006 00:57 schrieb darren kirby:
/usr/lib/xmms/Input/libmp4.so
However, when looking at the input plugins tab in xmms preferences, they
don't even show up. The Flac, Vorbis, cdaudio et al plugins in the same
directory do show up.
If I set the NIC to DHCP as you advise, you are implying that gentoo
will handle the various fixed IP's, subnets, gateways and differing vpn
schemes automaticly? How can it do that? Only some of the networks
(only three in fact) use DHCP.
ifplugd looks interesting - possibly the best I can do
Hi,
libsdl seems to fail checksum...and i don't seem to be able to make it
take the package from another mirror despite having different mirrors
in make.conf ...it keeps going to
http://www.libsdl.org/release/SDL-1.2.11.tar.gz
checking ebuild checksums ;-)
checking auxfile checksums ;-)
On 9/19/06, Richard Fish [EMAIL PROTECTED] wrote:
On 9/19/06, Alon Keren [EMAIL PROTECTED] wrote:
My aim is to have the ability to regularly build and maintain
completely customized Linux systems.
This should be possible by using your own local portage tree (probably
based initially on
On Wednesday 20 September 2006 06:29, Kumar Golap wrote:
libsdl seems to fail checksum...and i don't seem to be able to make it
take the package from another mirror despite having different mirrors
in make.conf ...it keeps going to
http://www.libsdl.org/release/SDL-1.2.11.tar.gz
Next time
52 matches
Mail list logo