I've finally made the brave step of using KDE4 as the primary desktop on my
work machine :-) I must be too used to 3.5 as there are some things I can't
yet figure out. The most annoying is column headings. By way of example,
dolphin and kmail, it's the filename|size|date and Subject|From|Date
On Sun, 15 Feb 2009 14:27:08 +0800
zhangwe...@realss.com wrote:
I don't know if in China network is specially boardband otherwise how to
explain the forums dare to allow dozens of hi-res photo posted in-line
of messages and web designers dare to design websites with a front page
of more than
On Sun, 15 Feb 2009 14:27:08 +0800
zhangwe...@realss.com wrote:
I don't know if in China network is specially boardband otherwise how to
explain the forums dare to allow dozens of hi-res photo posted in-line
of messages and web designers dare to design websites with a front page
of more than
Amar Ćosić
amar.co...@gmail.com
a...@amar.ba
+38761240095
http://www.amar.ba
On Sun, Feb 15, 2009 at 2:27 AM, Albert Hopkins mar...@letterboxes.orgwrote:
On Sun, 2009-02-15 at 00:15 +, amar.co...@gmail.com wrote:
Hello list
I have this weird issue with Gnome and diferent file types.
2009/2/15 daid kahl daid...@gmail.com
)On Sat, 2009-02-14 at 20:05 +0900, daid kahl wrote:
I was bored and playing around with macchanger to change my Wireless
MAC address, and wireless has not worked since, even though I'm using
my hardware MAC address again. I'm usually using
Hi All,
I am thinking of installing Gentoo on a Dell box with this RAID controller:
http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapter1.htm
Has anyone got experience with this hardware? What will I need to include in
the kernel? Will I need any fancy
On Sunday 15 February 2009 08:14:28 Mike Kazantsev wrote:
On Sun, 15 Feb 2009 14:27:08 +0800
zhangwe...@realss.com wrote:
I don't know if in China network is specially boardband otherwise how
to explain the forums dare to allow dozens of hi-res photo posted
in-line of messages and web
Well, I've just upgraded my laptop. The old one has ati
radeon r250 graphics card. On this card I can easily turn
off the screen using nice program radeantool of course
xset dpms force off worked as well. And turn off was
permanent. It is worth to mention that I was using
On Sunday 15 February 2009, daid kahl wrote:
wifi0: probing for an IPV4LL address
wifi0: checking 169.254.62.179 is available on attached networks
wifi0: using IPv4LL address
169.254.62.179[ ok
] * received address 169.254.62.179/16
I notice that very partial solution for me is to switch to console
(alt+ctrl+f1)
and as a root run ./screenoff script. At least this works and I can use it
to lid.sh script, for example something like this
---
#open
screenon
chvt 7
# close
chvt 12
screenoff
---
On Sun, Feb 15,
On Tuesday 10 February 2009, James wrote:
Mick michaelkintzios at gmail.com writes:
I use to listen to my voice mail, via mplayer and seamonkey.
I would have thought that mplayer is a bit of an overkill for playing
.wav, have you tried /usr/bin/aplay?
True but it always worked. Aplay
On Tuesday 10 February 2009, James wrote:
I recompile seamonkey with --deep but that has not fixed the problem...
Have you tried moving the ~/.mozilla-X file where the configurations for
seamonkey are kept (not sure where that would be, because I do not use
Seamonkey) and launching
daid kahl wrote:
2009/2/15 daid kahl daid...@gmail.com mailto:daid...@gmail.com
)On Sat, 2009-02-14 at 20:05 +0900, daid kahl wrote:
I was bored and playing around with macchanger to change my
Wireless
MAC address, and wireless has not worked since, even
At Sun, 15 Feb 2009 09:40:42 +0200 Alan McKinnon alan.mckin...@gmail.com
wrote:
On Saturday 14 February 2009 01:50:38 Allan Gottlieb wrote:
Recently evince stopped working on one of my machines, ajglap.
For every pdf, evince opens a window and complains
unable to open document
Mick wrote:
Hi,
Hi All,
I am thinking of installing Gentoo on a Dell box with this RAID controller:
http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapter1.htm
Has anyone got experience with this hardware? What will I need to include in
the kernel? Will I need any
2009/2/15 Shawn Haggett po...@podgeweb.com
daid kahl wrote:
2009/2/15 daid kahl daid...@gmail.com mailto:daid...@gmail.com
)On Sat, 2009-02-14 at 20:05 +0900, daid kahl wrote:
I was bored and playing around with macchanger to change my
Wireless
MAC address,
On Sonntag 15 Februar 2009, zhangwe...@realss.com wrote:
Volker Armin Hemmann schrieb:
konqueror
it is better than ff anyway.
Are you sure it runs multi-process?
yes (without tabs I am sure)
and with tabs, even when one tab is hanging, the others go on (at least with
kde4.2).
On Sonntag 15 Februar 2009, Peter Humphrey wrote:
On Sunday 15 February 2009 08:14:28 Mike Kazantsev wrote:
On Sun, 15 Feb 2009 14:27:08 +0800
zhangwe...@realss.com wrote:
I don't know if in China network is specially boardband otherwise how
to explain the forums dare to allow dozens
Or would I be better off using ext3 and converting it to ext4 in a month
or two? Are there any downsides to converting a fs from ext3 to ext4 in this
way?
The downsides are that you'll end up with missing ext4 features that will
only apply to newly created files after the conversion. I
On Montag 02 Februar 2009, Stroller wrote:
For more funroll-loopiness I contemplate using ext4 for the new system
I'm about to install.
Anyone know of any LiveCDs that would support this?
I _think_ it should be just a case of untarring the stage 3, chrooting
in, updating everything to
El Dom, 15 de Febrero de 2009, 16:59, Volker Armin Hemmann escribió:
On Montag 02 Februar 2009, Stroller wrote:
the best thing would be to wait for another year before you even think
about touching that mess.
If by that mess you mean ext4, you should know that it's
just as stable as ext3.
--
On Sonntag 15 Februar 2009, Jesús Guerrero wrote:
El Dom, 15 de Febrero de 2009, 16:59, Volker Armin Hemmann escribió:
On Montag 02 Februar 2009, Stroller wrote:
the best thing would be to wait for another year before you even think
about touching that mess.
If by that mess you mean
I'd like to buy a Sipix A6 portable printer for printing boarding
passes on the go since they can be had for around $20. It is said to
work in Linux:
http://openprinting.org/show_printer.cgi?recnum=SiPix-Pocket_Printer_A6
but that page only mentions the serial connection and doesn't mention
the
On Sunday 15 February 2009, Alex wrote:
Mick wrote:
Hi,
Hi All,
I am thinking of installing Gentoo on a Dell box with this RAID
controller:
http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapt
er1.htm
Has anyone got experience with this hardware? What
Here is a method for sharing a scanner over a network with
sane-backends and inetd:
http://www.linux.com/articles/57798
My prospective printer/scanner (HP c4599) is not listed in the SANE
compatible devices:
http://www.sane-project.org/sane-mfgs.html#Z-HEWLETT-PACKARD
It is listed in HPLIP,
Grant wrote:
I'd like to buy a Sipix A6 portable printer for printing boarding
passes on the go since they can be had for around $20. It is said to
work in Linux:
http://openprinting.org/show_printer.cgi?recnum=SiPix-Pocket_Printer_A6
but that page only mentions the serial connection and
On Sunday 15 February 2009, 05:10, Joshua Murphy wrote:
Google Chrome's another that has this wonderful feature... and doesn't
run on Linux (yet).
And even when it will, I bet it would be under wine.
Grant wrote:
I'd like to install the latest miro from their nightlies and that
means installing manually without an ebuild. I've always avoided this
because I don't want files spread across my system without an easy way
to remove them. I've also always wanted to set up a good cruft
removal
I'd like to buy a Sipix A6 portable printer for printing boarding
passes on the go since they can be had for around $20. It is said to
work in Linux:
http://openprinting.org/show_printer.cgi?recnum=SiPix-Pocket_Printer_A6
but that page only mentions the serial connection and doesn't
Hi,
I am new to Gentoo, and yes I am also new to compiling kernels.
Well after that introduction, I will give you the details.
I am running now
uname -a
Linux gentoo 2.6.25-gentoo-r8 #7 SMP Sun Nov 16 16:29:29 BOT 2008 i686
Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz GenuineIntel GNU/Linux
On Sunday 15 February 2009, daid kahl wrote:
what kind of IP I had. In any case, I tried installing dhcpcd with the
-zeroconf useflag, and I was still getting this sort of IP, so I don't
think it's quite as simple as that.
Run dhcpcd -k to flush out any previous IP addresses.
This then
Am Sonntag, 15. Februar 2009 22:31:40 schrieb Guillermo Garron:
Here you can find the config file for my current kernel.
This has CONFIG_E1000=y
And the used to generate the new kernel (where NIC is not detected)
This has both CONFIG_E1000=y and CONFIG_E1000E=y, maybe that's the problem.
I think you need just E1000E for your NIC.
I use E1000E * for my intel:
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network
Connection (rev 03)
signature.asc
Description: PGP signature
* Stroller (strol...@stellar.eclipse.co.uk) [14.02.09 08:29]:
On 4 Feb 2009, at 13:40, Justin wrote:
Except that here, ntp-client seems to start *before* the network, so fails
to find the ntp-server.
I'll investigate this more later.
Stroller.
If you have baselayout2 and openrc check
On Sun, Feb 15, 2009 at 5:40 PM, Dirk Heinrichs
dirk.heinri...@online.de wrote:
Am Sonntag, 15. Februar 2009 22:31:40 schrieb Guillermo Garron:
Here you can find the config file for my current kernel.
This has CONFIG_E1000=y
And the used to generate the new kernel (where NIC is not
On Sun, Feb 15, 2009 at 5:50 PM, Kenneth Prugh ken69...@gmail.com wrote:
I think you need just E1000E for your NIC.
I use E1000E * for my intel:
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network
Connection (rev 03)
Hi,
I think that is the one I should use! cause it
On Sun, Feb 15, 2009 at 5:54 PM, Guillermo Garron
guillermo.fed...@gmail.com wrote:
On Sun, Feb 15, 2009 at 5:50 PM, Kenneth Prugh ken69...@gmail.com wrote:
I think you need just E1000E for your NIC.
I use E1000E * for my intel:
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit
Guillermo Garron wrote:
On Sun, Feb 15, 2009 at 5:50 PM, Kenneth Prugh ken69...@gmail.com wrote:
I think you need just E1000E for your NIC.
I use E1000E * for my intel:
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network
Connection (rev 03)
Hi,
I think that is the one I
Here is a method for sharing a scanner over a network with
sane-backends and inetd:
http://www.linux.com/articles/57798
My prospective printer/scanner (HP c4599) is not listed in the SANE
compatible devices:
http://www.sane-project.org/sane-mfgs.html#Z-HEWLETT-PACKARD
It is listed in
* Volker Armin Hemmann (volkerar...@googlemail.com) [15.02.09 15:45]:
of course konqueror can block ads and scripts without 'extensions'
Well, since you have to install most of the kde stuff *and* mysql:
definetly a no go...
Sebastian
--
Religion ist das Opium des Volkes.
On Sun, Feb 15, 2009 at 6:09 PM, Nikos Chantziaras rea...@arcor.de wrote:
Guillermo Garron wrote:
On Sun, Feb 15, 2009 at 5:50 PM, Kenneth Prugh ken69...@gmail.com wrote:
I think you need just E1000E for your NIC.
I use E1000E * for my intel:
00:19.0 Ethernet controller: Intel Corporation
On Sonntag 15 Februar 2009, Sebastian Günther wrote:
* Volker Armin Hemmann (volkerar...@googlemail.com) [15.02.09 15:45]:
of course konqueror can block ads and scripts without 'extensions'
Well, since you have to install most of the kde stuff *and* mysql:
definetly a no go...
* Volker Armin Hemmann (volkerar...@googlemail.com) [15.02.09 23:31]:
On Sonntag 15 Februar 2009, Sebastian Günther wrote:
* Volker Armin Hemmann (volkerar...@googlemail.com) [15.02.09 15:45]:
of course konqueror can block ads and scripts without 'extensions'
Well, since you have to
I've been experiencing spontaneous reboots on one gentoo machine
lately. Looking thru /var/log/messages... I see the restarts but
looking above that... I'm not seeing anything I recognize as being a
culprit.
Its been happening for a few weeks... but I've been busy and only now
digging into it (
On Sunday 15 February 2009 22:57:24 Sebastian Günther wrote:
Which useflag magic do I have to use to achieve that goal?
-mysql
Seems ebuilds have the ability to turn on use flags for themselves that the
user has given no preference to. Turn it off, and it's off.
--
Mike Williams
* Mike Williams (m...@gaima.co.uk) [16.02.09 00:50]:
On Sunday 15 February 2009 22:57:24 Sebastian Günther wrote:
Which useflag magic do I have to use to achieve that goal?
-mysql
Seems ebuilds have the ability to turn on use flags for themselves that the
user has given no preference
On Sun, Feb 15, 2009 at 3:42 PM, Harry Putnam rea...@newsguy.com wrote:
I've been experiencing spontaneous reboots on one gentoo machine
lately. Looking thru /var/log/messages... I see the restarts but
looking above that... I'm not seeing anything I recognize as being a
culprit.
Its been
I've got a low-use CGI script on my web server. Aside from web
crawlers, I usually see at most a few hits a week from
people who share my hobby.
I just found out it's been down for an unknown period of time because
my Apache no longer does CGI scripting.
I can't even get it to run the simplest
Unfortunately I had the same problem. The solution you can find here:
http://bugs.gentoo.org/show_bug.cgi?id=258490
Marcin
On Sun, Feb 15, 2009 at 2:46 PM, Allan Gottlieb gottl...@nyu.edu wrote:
At Sun, 15 Feb 2009 09:40:42 +0200 Alan McKinnon alan.mckin...@gmail.com
wrote:
On Saturday 14
At Sun, 15 Feb 2009 08:46:37 -0500 Allan Gottlieb gottl...@nyu.edu wrote:
At Sun, 15 Feb 2009 09:40:42 +0200 Alan McKinnon alan.mckin...@gmail.com
wrote:
On Saturday 14 February 2009 01:50:38 Allan Gottlieb wrote:
Recently evince stopped working on one of my machines, ajglap.
For every
So the problem started recently.
That means it is either:
a cap going bad.
oxidized contacts.
dust clogging the fans.
PSU is going bad.
something obscure.
Do the easy thing first. Clean your case, reseat all cards and memory modules
and check all caps while doing so. Any of them deformed? The
On Feb 15, 2009, at 7:16 PM, Volker Armin Hemmann volkerar...@googlemail.com
wrote:
So the problem started recently.
That means it is either:
a cap going bad.
oxidized contacts.
dust clogging the fans.
PSU is going bad.
something obscure.
Do the easy thing first. Clean your case, reseat all
Mark Knecht markkne...@gmail.com writes:
Reseat memory and PCI cards, etc. Consider removing for a period of
time any hardware not absolutely necessary to debug the problem. (I.e.
- second video card, extra disk drives, extra network adapters, etc.)
Run memtest86 for a few days if you can
Mark Knecht wrote:
On Sun, Feb 15, 2009 at 3:42 PM, Harry Putnam rea...@newsguy.com wrote:
I've been experiencing spontaneous reboots on one gentoo machine
lately. Looking thru /var/log/messages... I see the restarts but
looking above that... I'm not seeing anything I recognize as being a
At Mon, 16 Feb 2009 01:00:24 +0100 Marcin Zwd marcin...@gmail.com wrote:
Unfortunately I had the same problem. The solution you can find here:
http://bugs.gentoo.org/show_bug.cgi?id=258490
Thank you for this information. Somehow I missed it.
allan
PS In this mailing list the custom and
Kevin O'Gorman kogor...@gmail.com writes:
I don't get much help from the logs. The access log shows that the
request got an error code,
64.166.164.49 - - [15/Feb/2009:15:46:32 -0800] GET /hex-bin/board
HTTP/1.1 500 542
and all that the error log says is:
[Sun Feb 15 15:46:32 2009]
Allan Gottlieb wrote:
Thank you for this information. Somehow I missed it.
allan
PS In this mailing list the custom and member preference is not to top
post. That is, we prefer to have replies after (or interspersed with)
the original, not before it.
Bottom post and text only is
On Sun, 15 Feb 2009 17:42:44 -0600, Harry Putnam wrote:
2) checking how hot the cpu is getting (Doesn't appear to be a
problem) But now running a cron job recording temperatures every 10
minutes. So that may turn up something.
You could also check disk temperatures with
On Sun, Feb 15, 2009 at 4:26 PM, Harry Putnam rea...@newsguy.com wrote:
Mark Knecht markkne...@gmail.com writes:
Reseat memory and PCI cards, etc. Consider removing for a period of
time any hardware not absolutely necessary to debug the problem. (I.e.
- second video card, extra disk drives,
On 15 Feb 2009, at 21:51, Sebastian Günther wrote:
* Stroller (strol...@stellar.eclipse.co.uk) [14.02.09 08:29]:
On 4 Feb 2009, at 13:40, Justin wrote:
Except that here, ntp-client seems to start *before* the network,
so fails
to find the ntp-server.
I'll investigate this more later.
On 15 Feb 2009, at 21:31, Guillermo Garron wrote:
...
I am running now
uname -a
Linux gentoo 2.6.25-gentoo-r8 #7 SMP Sun Nov 16 16:29:29 BOT 2008 i686
Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz GenuineIntel GNU/Linux
...
And the used to generate the new kernel (where NIC is not detected)
On Sun, Feb 15, 2009 at 4:44 PM, Harry Putnam rea...@newsguy.com wrote:
Kevin O'Gorman kogor...@gmail.com writes:
I don't get much help from the logs. The access log shows that the
request got an error code,
64.166.164.49 - - [15/Feb/2009:15:46:32 -0800] GET /hex-bin/board
HTTP/1.1 500 542
On Sun, Feb 15, 2009 at 9:17 PM, Stroller
strol...@stellar.eclipse.co.uk wrote:
On 15 Feb 2009, at 21:31, Guillermo Garron wrote:
...
I am running now
uname -a
Linux gentoo 2.6.25-gentoo-r8 #7 SMP Sun Nov 16 16:29:29 BOT 2008 i686
Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz GenuineIntel
On Sun, Feb 15, 2009 at 5:23 PM, Kevin O'Gorman kogor...@gmail.com wrote:
On Sun, Feb 15, 2009 at 4:44 PM, Harry Putnam rea...@newsguy.com wrote:
Kevin O'Gorman kogor...@gmail.com writes:
I don't get much help from the logs. The access log shows that the
request got an error code,
On Sat, Feb 14, 2009 at 5:22 PM, Alex Schuster wo...@wonkology.org wrote:
Dirk Uys wrote:
I have a problem when running doxygen from a cron job. It seems like
doxygen is simply aborting at an arbitrary point during execution. I
tried to search on the internet, but could not find anything
On Monday 16 February 2009, Dale wrote:
Allan Gottlieb wrote:
PS In this mailing list the custom and member preference is not to top
post. That is, we prefer to have replies after (or interspersed with)
the original, not before it.
Bottom post and text only is preferred. I think
66 matches
Mail list logo