On 2012-01-09 00:48, Walter Dnes wrote:
Hm... if you didn't compile it in you would have needed an initrd;
didn't think of that... :-(
* with only one binary blob. it just works
* multiple blobs should not be included in the kernel, otherwise it gets
confused. If multiple blobs are
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 09.01.2012 02:47, Dale wrote:
Hinnerk van Bruinehsen wrote: On 09.01.2012 01:34, Dale wrote:
Howdy,
I'm about to upgrade my kernel. Do I have to update the
init thingy too or should it work without updating with each
kernel upgrade? I
On Jan 9, 2012 3:24 PM, pk pete...@coolmail.se wrote:
On 2012-01-09 00:48, Walter Dnes wrote:
Hm... if you didn't compile it in you would have needed an initrd;
didn't think of that... :-(
* with only one binary blob. it just works
* multiple blobs should not be included in the kernel,
On 6 January 2012 11:11, Helmut Jarausch jarau...@igpm.rwth-aachen.de wrote:
On 01/06/2012 10:51:26 AM, András Csányi wrote:
Dear All,
I updated my system and there is a new gentoo-sources version
3.2.0-gentoo-r1. I reconfigured my system to use this kernel and I
compiled the kernel with
On Mon, 09 Jan 2012 07:46:45 +0100, Hartmut Figge wrote:
I have now verified this. Without esound i am getting
Timestamp: 09.01.2012 07:18:12
Error: uncaught exception: [Exception... Component returned failure
code: 0x80040111 (NS_ERROR_NOT_AVAILABLE) [nsISound.play] nsresult:
0x80040111
Neil Bothwick:
On Mon, 09 Jan 2012 07:46:45 +0100, Hartmut Figge wrote:
I have now verified this. Without esound i am getting
Timestamp: 09.01.2012 07:18:12
Error: uncaught exception: [Exception... Component returned failure
code: 0x80040111 (NS_ERROR_NOT_AVAILABLE) [nsISound.play]
Hi folks !
I am facing a problem since a week now when enabling radeon power
management following KMS Power Management Options [1]. I have two radeon
HD 9770 on my system in crossfire configuration, but on Linux I only use
one of them (the first one on the PCI bus).
When I switch the GPUs
Hinnerk van Bruinehsen wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I would say it's between 8 and 9 - both versions are slotted, so you
can install both at the same time. If you have trouble, you can reboot
from a install cd/usb-drive and reinstall legacy grub. I never had any
trouble
Hi :)
It seems I don't understand something about cron(tab). Can someone help
me pls:
I want to run flexbackup with the following backup plan:
* monthly full
* weekly diff
* daily incr
So I have installed sys-process/vixie-cron-4.1-r12 (and virtual/cron-0
and sys-process/cronbase-0.3.3).
On 2012-01-09 11:51, Blakawk wrote:
Hi folks !
I am facing a problem since a week now when enabling radeon power
management following KMS Power Management Options [1]. I have two
radeon HD 9770 on my system in crossfire configuration, but on Linux
I
only use one of them (the first one on the
Hartmut Figge:
Neil Bothwick:
That looks like a configuration option.
No, it isn't.
I am now using the official SM 2.6.1 from mozilla.org. Same exception.
Also in a new profile. And i don't like the ugly new emoticons. *g*
Hartmut
--
Usenet-ABC-Wiki http://www.usenet-abc.de/wiki/
Von Usern
On Mon, 09 Jan 2012 13:10:50 +0100
Daniel Troeder dan...@admin-box.com wrote:
Hi :)
It seems I don't understand something about cron(tab). Can someone
help me pls:
I want to run flexbackup with the following backup plan:
* monthly full
* weekly diff
* daily incr
So I have
On 09.01.2012 12:33, Alan McKinnon wrote:
On Mon, 09 Jan 2012 13:10:50 +0100
Daniel Troeder dan...@admin-box.com wrote:
Hi :)
It seems I don't understand something about cron(tab). Can someone
help me pls:
I want to run flexbackup with the following backup plan:
* monthly full
*
On Mon, 09 Jan 2012 14:02:23 +0100
Daniel Troeder dan...@admin-box.com wrote:
On 09.01.2012 12:33, Alan McKinnon wrote:
On Mon, 09 Jan 2012 13:10:50 +0100
Daniel Troeder dan...@admin-box.com wrote:
Hi :)
It seems I don't understand something about cron(tab). Can someone
help me
Hartmut Figge wrote:
Hartmut Figge:
Neil Bothwick:
That looks like a configuration option.
No, it isn't.
I am now using the official SM 2.6.1 from mozilla.org. Same exception.
Also in a new profile. And i don't like the ugly new emoticons. *g*
Hartmut
I have Fluxbox installed here too. I
Dale:
I have Fluxbox installed here too. I logged out of KDE and into
Fluxbox. Seamonkey does NOT play the sound when in Fluxbox.
:)
It appears that KDE takes care of that when I am logged into it. So,
you may need to figure out how to make the GUI take care of yours.
I seem to recall from
Hartmut Figge wrote:
Dale:
I have Fluxbox installed here too. I logged out of KDE and into
Fluxbox. Seamonkey does NOT play the sound when in Fluxbox.
:)
It appears that KDE takes care of that when I am logged into it. So,
you may need to figure out how to make the GUI take care of yours.
Dale wrote:
I was thinking it did mount /usr but wasn't sure. Actually, I thought
that was the point. Thing is, I'm not sure either. It seems when I
built mine it read fstab. Maybe it looks there to see if /usr is on a
separate partition and if it is then it knows to mount /usr. I
Dale:
I would try alsa. It works fine here.
Also here.
I can play music and still hear all the other sounds that come along,
Also here.
such as getting emails
That's the only one which doesn't work.
and such.
'and such' also works here. *g*
alsa is enabled in the kernel and i have these
Dale:
Maybe you should enable the alsa USE flag?
alsa has been in make.conf ever. As for SM, i am not using an ebuild,
but here is an excerpt from the building of SM:
- build-log.txt -
checking for alsa... yes
checking MOZ_ALSA_CFLAGS... -I/usr/include/alsa
checking MOZ_ALSA_LIBS...
Hartmut Figge wrote:
'and such' also works here. *g*
alsa is enabled in the kernel and i have these packages installed:
hafi@i5_64 ~ $ eix -I --only-names alsa
media-libs/alsa-lib
media-sound/alsa-headers
media-sound/alsa-utils
media-sound/alsaplayer
May it be that you have other packages
Dale wrote:
Hartmut Figge wrote:
'and such' also works here. *g*
alsa is enabled in the kernel and i have these packages installed:
hafi@i5_64 ~ $ eix -I --only-names alsa
media-libs/alsa-lib
media-sound/alsa-headers
media-sound/alsa-utils
media-sound/alsaplayer
May it be that you have other
Dale:
The difference is: gst-plugins-alsa and alsamixergui.
None of them makes a difference. Sigh.
I just wonder if alsamixer has something muted? Have you ran
alsamixer to check it?
Yes. All fine. Remember, that the notification works with esound. And a
muted channel would not cause an
Mick michaelkintzios at gmail.com writes:
Try Settings/Configure and then add new account, or fire up kcmshell4
kcm_akonadi and add resources as desired.
I had to use the settings-configureKorganizer-calenders
and then put the explict path into the config menu
Blakawk blakawk at gentooist.com writes:
I am facing a problem since a week now when enabling radeon power
management following KMS Power Management Options [1]. I have two radeon
Well I cannot help you, explicitly; but I have some info to share with you.
I have 2 ethernet ports on an
Nilesh Govindarajan contact at nileshgr.com writes:
Well, the title tells the question clearly; how do I configure network
such that the first ip is obtained via dhcpcd and other is static?
config_eth0=dhcp static doesn't work.
Did you look at /etc/conf.d/net.example for hints?
As a
On 01/08/12 19:31, Walter Dnes wrote:
On Fri, Jan 06, 2012 at 08:40:04PM -0700, Joseph wrote
On 01/06/12 13:51, walt wrote:
Try turning the NLS useflag on for your installed font packages that use
NLS. Not all font packages use NLS, dunno why. To see which installed
fonts use NLS:
#eix -IU
On 09.01.2012 12:11, Blakawk wrote:
On 2012-01-09 11:51, Blakawk wrote:
Hi folks !
I am facing a problem since a week now when enabling radeon power
management following KMS Power Management Options [1]. I have two
radeon HD 9770 on my system in crossfire configuration, but on Linux I
Daniel Troeder daniel at admin-box.com writes:
So I have installed sys-process/vixie-cron
Ah, excellent. Just so you know, Paul Vixie
is one of the un_sung heros of the the internet.
just look up Paul Vixie on wikepedia and you'll quickly
realize that he is one of the Titans that has worked
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Le 09/01/2012 17:48, James a écrit :
Blakawk blakawk at gentooist.com writes:
I am facing a problem since a week now when enabling radeon power
management following KMS Power Management Options [1]. I have
two radeon
Well I cannot help you,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Le 09/01/2012 18:57, Sebastian Beßler a écrit :
On 09.01.2012 12:11, Blakawk wrote:
On 2012-01-09 11:51, Blakawk wrote:
Hi folks !
I am facing a problem since a week now when enabling radeon
power management following KMS Power Management
On 2012-01-09 10:47, Pandu Poluan wrote:
Is it possible to load the firmware blob after booting, from the shell?
I don't think so; KMS needs it to talk to the gpu so either it needs to
be in an initrd (loaded with the KMS/framebuffer module) or compiled in.
That's how I understand it anyway...
On Mon, Jan 09, 2012 at 04:47:22PM +0700, Pandu Poluan wrote
Is it possible to load the firmware blob after booting, from the shell?
I don't think so. These are not standard kernel modules (*.o) files.
--
Walter Dnes waltd...@waltdnes.org
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Le 09/01/2012 19:47, Blakawk a écrit :
Le 09/01/2012 18:57, Sebastian Beßler a écrit :
On 09.01.2012 12:11, Blakawk wrote:
On 2012-01-09 11:51, Blakawk wrote:
Hi folks !
I am facing a problem since a week now when enabling radeon
power
On 01/09/2012 09:50 AM, Joseph wrote:
What is the easiest way to re-emerge all the fonts on the system or
list the one that are installed?
Listing them is easy:
#eix -I | grep media-fonts
I'll bet there is some other tool that will also emerge all of them
for you but I'm too lazy to do the
On Mon, Jan 9, 2012 at 5:23 PM, walt w41...@gmail.com wrote:
On 01/09/2012 09:50 AM, Joseph wrote:
What is the easiest way to re-emerge all the fonts on the system or
list the one that are installed?
Listing them is easy:
#eix -I | grep media-fonts
I'll bet there is some other tool that
On 01/09/2012 04:46 AM, Hartmut Figge wrote:
It would be interesting to know, if Gnome is using pulseaudio...
Unfortunately yes. They seem determined to shove pulse down our
throats just like everyone else, and for no good reason that I
can see. Yes, maybe some people need a sound daemon but I
On Mon, Jan 09, 2012 at 10:50:28AM -0700, Joseph wrote
I think you are correct on this one. I'll try to modify your system.
What is the easiest way to re-emerge all the fonts on the system or
list the one that are installed?
I've manually installed some of the fonts that I have on my other
Success - I managed to get a raid1 device operating.
I created the final filesystem by using mkfs.xfs -f /dev/md0, then
waited for the rebuild to complete before rebooting the system.
It appears to be created successfully. Now I'll try the same sequence
with sdb and sdc to see
Hi there!
I have to copy some 100 G of files from one to another USB drive. Both
are formatted with NTFS, the destination drive already has a truecrypt
container file where I need to store the data into.
This is sort of working, but the speed is waa too slow. After about
four hours, only 8 G
Me too.
mdadm --detail /dev/md0 thinks that /dev/sdc1 is faulty.
I'm not sure whether it's really faulty, or just that my setup for RAID
is screwed up.
How do I get rid of an existing /dev/md0?
you stop it. Override the superblock with dd.. and lose all data on the disks.
Hi,
Can anyone give me any pointers as to how to diagnose a problem with
ntpd crashing. My time keeps defaulting to 5 hours earlier than it
should.
There's nothing in dmesg when I do dmesg | grep time, or dmesg | grep
ntp, but /etc/init.d/ntpd status tells me that ntpd has crashed.
Jeff
On Mon 09 Jan 2012 10:44:02 PM IST, James wrote:
Nilesh Govindarajan contact at nileshgr.com writes:
Well, the title tells the question clearly; how do I configure network
such that the first ip is obtained via dhcpcd and other is static?
config_eth0=dhcp static doesn't work.
Did you look
Hartmut Figge wrote:
Hartmut Figge:
Now, installation of esound was necessary for my SeaMonkey to be able to
notify of new mail with a custom sound file. I do *not* want pulseaudio,
so, do you know of an replacement for esound which could work with
SeaMonkey?
Summary of the thread:
Without
Dale:
Hartmut Figge wrote:
Now, removing esound is no longer a problem for gentoo-user. I may take
it upstream to mozilla.org.
When you take it upstream, tell them it doesn't work in Fluxbox plus the
GUI you are using. It may help them narrow down the problem.
*If*, not *when*. ;)
Hartmut,
Define crashing?
This looks more like problems with yout TZ variables than ntpd.
try ntpq -p to check if its actually running/locked. If ntpd is
freewheeling, it is prpbably because your time is too far from lock so
it will silently fail (default config).
If ntpd has really crashed (ps aux
Hartmut Figge:
Now, installation of esound was necessary for my SeaMonkey to be able to
notify of new mail with a custom sound file. I do *not* want pulseaudio,
so, do you know of an replacement for esound which could work with
SeaMonkey?
Summary of the thread:
Without esound there is an
On Jan 10, 2012 8:48 AM, Jeff Cranmer j...@lotussevencars.com wrote:
Me too.
mdadm --detail /dev/md0 thinks that /dev/sdc1 is faulty.
I'm not sure whether it's really faulty, or just that my setup for
RAID
is screwed up.
How do I get rid of an existing /dev/md0?
you
On Jan 10, 2012 1:35 AM, James wirel...@tampabay.rr.com wrote:
Daniel Troeder daniel at admin-box.com writes:
So I have installed sys-process/vixie-cron
Ah, excellent. Just so you know, Paul Vixie
is one of the un_sung heros of the the internet.
just look up Paul Vixie on wikepedia and
49 matches
Mail list logo
