Hi,
with crossdev I tried to build a toolchain for the
armv7a-unknown-linux-gnueabi target.
The build process failed due to a wrong format of an archive
of patches.
Is there a way for a local quick fix...or am I lost for
a longer period of time... ;) ???
Best regards,
mcc
Log:
_
*
As title says, qt-webkit-4.8.2 doesnt compile on an amd64 config and a new
install.
Known problem ?
Known solution ?
Or should I fill a bug report ?
Am 17.08.2012 08:21, schrieb Alain Didierjean:
As title says, qt-webkit-4.8.2 doesnt compile on an amd64 config and a new
install.
Known problem ?
Known solution ?
Or should I fill a bug report ?
Please post the compile output (the last part where it fails is
sufficient). And also your
Hello all,
I'm trying to emerge app-text/fbreader, but I found there's a bug
that not solved about glib.h not fount.
Somebody gave a solution about it, but I don't like to modify the
ebuild files.Then I get the source form
/usr/portage/distfiles/fbreader-sources-0.12.10.tgz, and make
On Fri, Aug 17, 2012 at 08:21:28AM +0200, Alain Didierjean wrote:
As title says, qt-webkit-4.8.2 doesnt compile on an amd64 config and a new
install.
Known problem ?
Known solution ?
Or should I fill a bug report ?
I'm sure that it works OK, it's not a bug. It must be your config
error.
Hi there!
Two days ago, my PC suddenly died, after working fine for half a year. I
used myrtcwake as usual to suspend to RAM, and it woke up in the
morning. But after two minutes, the screen went blank and nothing, even
SysRq, gave a reaction. I tried booting a couple of times again, and
Hi Alex,
...shot in the dark:
Remove as much as possible of the cards, addons, connections etc
from the PC ... make in as much bare bone as possible.
Check All coolers (the little ones also) for dust. Remove all
dust even if it is not completly covered with it.
Dont forget the internals of the
Aaa aAaa aaa a
Am 17.08.2012 10:31 schrieb meino.cra...@gmx.de:
Hi Alex,
...shot in the dark:
Remove as much as possible of the cards,aadwqqqaaa www wpa www a weißes
www aa Array www www www a aaa aa aadwqqqaaa aaa w aadwqqqaaa www
aa aaa a aaa www Awaa aaa aa quattro
Hi, how do I make changes to permissions and access mode of device nodes
persistent? At the moment I have to chown and chmod the /dev/snd/seq node every
boot to make it accessible to my user. the other nodes are fine. Here's the
output of ls -l /dev/snd/
total 0
drwxr-xr-x 2 root root
I'm in need of some expert advise about CFLAGS. I'm going to install
Gentoo in two systems, an Atom 330 and a P4 prescott. Since compiling
lots of stuff in an Atom is less than joyful, I intend to do almost
all compilation on the prescott and produce binary packages to use on
the Atom. So,
Am Freitag, 17. August 2012, 09:50:40 schrieb Alex Schuster:
sounds like a power problem.
Either psu is gone bad (get a new one)
or your mainboard's power circuitry gone bad (if replacement of psu does not
help, get a new one).
But first thing first: disconnect your hdds! No reason to risk
On Fri, 17 Aug 2012 01:54:34 -0700
Cinder cin...@linuxwaves.com wrote:
Hi, how do I make changes to permissions and access mode of device
nodes persistent? At the moment I have to chown and chmod
the /dev/snd/seq node every boot to make it accessible to my user.
the other nodes are fine.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 17.08.2012 08:19, meino.cra...@gmx.de wrote:
Hi,
with crossdev I tried to build a toolchain for the
armv7a-unknown-linux-gnueabi target.
The build process failed due to a wrong format of an archive of
patches. Is there a way for a local
Hello!
On Fri, 17 Aug 2012 09:50:40 +0200
Alex Schuster wo...@wonkology.org wrote:
Hi there!
Two days ago, my PC suddenly died, after working fine for half a
year. I used myrtcwake as usual to suspend to RAM, and it woke up in
the morning. But after two minutes, the screen went blank and
meino.cra...@gmx.de writes:
...shot in the dark:
Remove as much as possible of the cards, addons, connections etc
from the PC ... make in as much bare bone as possible.
Done already.
Check All coolers (the little ones also) for dust. Remove all
dust even if it is not completly covered with
Am Fri, 17 Aug 2012 01:54:34 -0700
schrieb Cinder cin...@linuxwaves.com:
Hi, how do I make changes to permissions and access mode of device nodes
persistent? At the moment I have to chown and chmod the /dev/snd/seq node
every boot to make it accessible to my user. the other nodes are fine.
On Friday 17 Aug 2012 07:57:49 Kermit wrote:
Hello all,
I'm trying to emerge app-text/fbreader, but I found there's a bug
that not solved about glib.h not fount.
Somebody gave a solution about it, but I don't like to modify the
ebuild files.Then I get the source form
Randolph Maaßen writes:
Aaa aAaa aaa a
Am 17.08.2012 10:31 schrieb meino.cra...@gmx.de
mailto:meino.cra...@gmx.de:
Hi Alex,
...shot in the dark:
Remove as much as possible of the cards,aadwqqqaaa www wpa www a
weißes www aa Array www www www a aaa aa aadwqqqaaa aaa w
2012/8/17 Alex Schuster wo...@wonkology.org
Randolph Maaßen writes:
Aaa aAaa aaa a
Am 17.08.2012 10:31 schrieb meino.cra...@gmx.de
mailto:meino.cra...@gmx.de:
Hi Alex,
...shot in the dark:
Remove as much as possible of the cards,aadwqqqaaa www wpa www a
weißes www aa
Alex Schuster wrote:
Hi there!
Two days ago, my PC suddenly died, after working fine for half a year.
I used myrtcwake as usual to suspend to RAM, and it woke up in the
morning. But after two minutes, the screen went blank and nothing,
even SysRq, gave a reaction. I tried booting a couple of
I realize that new udev without dracut wants /usr part of root
filesystem.
The last few gentoo installations I have done all had
/usr/tmp symlinked to /var/tmp and I don't believe I did this symlink
manually.
Will this be a problem with new udev and no dracut or are the programs
that must run
Randolph Maaßen wrote:
2012/8/17 Alex Schuster wo...@wonkology.org mailto:wo...@wonkology.org
Randolph Maaßen writes:
Aaa aAaa aaa a
Am 17.08.2012 10:31 schrieb meino.cra...@gmx.de
mailto:meino.cra...@gmx.de
mailto:meino.cra...@gmx.de
Am 17.08.2012 10:58, schrieb Jorge Almeida:
I'm in need of some expert advise about CFLAGS. I'm going to install
Gentoo in two systems, an Atom 330 and a P4 prescott. Since compiling
lots of stuff in an Atom is less than joyful, I intend to do almost
all compilation on the prescott and produce
Randolph Maaßen wrote:
Sorry for this bad post, somehow my phone unlocked in my pocket.
I assumed your cat walking over the keyboard ;)
-Matt
On Fri, Aug 17, 2012 at 3:54 AM, Cinder cin...@linuxwaves.com wrote:
Hi, how do I make changes to permissions and access mode of device nodes
persistent? At the moment I have to chown and chmod the /dev/snd/seq node
every boot to make it accessible to my user. the other nodes are fine. Here's
Randolph Maaßen writes:
2012/8/17 Alex Schuster wo...@wonkology.org mailto:wo...@wonkology.org
Woow! What is going on here?
Damn!!
Sorry for this bad post, somehow my phone unlocked in my pocket.
I'm happy for every reply, and this was a very special one :)
--
Mit
v...@ukr.net writes:
If the system behaves in such an unpredictable way (freezing at a
random point), I usually check the following things:
- RAM;
- bloated capacitors on the Motherboard;
- bloated or dried capacitors in the power supply unit;
If your PC is only half a year old, it is
On Fri, Aug 17, 2012 at 12:50 AM, Alex Schuster wo...@wonkology.org wrote:
Hi there!
Two days ago, my PC suddenly died, after working fine for half a year. I
used myrtcwake as usual to suspend to RAM, and it woke up in the morning.
But after two minutes, the screen went blank and nothing,
On Fri, Aug 17, 2012 at 2:53 PM, Florian Philipp li...@binarywings.net wrote:
Am 17.08.2012 10:58, schrieb Jorge Almeida:
1) Is this strategy right? If so, any other flags to add? (or any
flags to remove from the list?)
2) The --param flags are the ones of the computer that will do the
Volker Armin Hemmann writes:
sounds like a power problem.
Either psu is gone bad (get a new one)
Well, I got three old ones instead :)
or your mainboard's power circuitry gone bad (if replacement of psu does not
help, get a new one).
It did not help :( Too bad, I probably need a new
On Fri, Aug 17, 2012 at 1:16 PM, Alex Schuster wo...@wonkology.org wrote:
And there, it just crashed while in the BIOS setup.
If you are using a video card (instead of built-in/on-board video) I
would try a different video card, if you have an old or spare one. I
have had lots of video cards die
Am Fri, 17 Aug 2012 11:40:47 +0200
schrieb Marc Joliet mar...@gmx.de:
Am Fri, 17 Aug 2012 01:54:34 -0700
schrieb Cinder cin...@linuxwaves.com:
Hi, how do I make changes to permissions and access mode of device nodes
persistent? At the moment I have to chown and chmod the /dev/snd/seq
Paul Hartman writes:
If you are using a video card (instead of built-in/on-board video) I
would try a different video card, if you have an old or spare one. I
have had lots of video cards die from overheating and power spikes.
Sorry, I did not mention that I do not have a video card, it's
On 17/08/12 10:50, Alex Schuster wrote:
Booting good old memtest86 ran for an hour and only found one error,
then I aborted, removed three of my four memory modules (4GB each), and
tried different ones in the first bank. Memtest86 again did not find
much errors, but froze once.
It finds errors
Am 17.08.2012 19:57, schrieb Jorge Almeida:
On Fri, Aug 17, 2012 at 2:53 PM, Florian Philipp li...@binarywings.net
wrote:
Am 17.08.2012 10:58, schrieb Jorge Almeida:
1) Is this strategy right? If so, any other flags to add? (or any
flags to remove from the list?)
2) The --param flags are
On Fri, Aug 17, 2012 at 10:05 PM, Florian Philipp li...@binarywings.net wrote:
Am 17.08.2012 19:57, schrieb Jorge Almeida:
I read in http://forums.gentoo.org/viewtopic-t-895104.html :
atom
Intel Atom CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3 and SSSE3
instruction set support.
Does
Am Freitag, 17. August 2012, 22:34:45 schrieb Jorge Almeida:
Does -march=prescott not ensure that the prescott will work even if
unsupported flags are added?
no
every flag on its own. If you set a flag it is your responsibility to check
that
they actually work.
--
#163933
Mouse-to-mouse resuscitation?
Unless it's headless.
--
... _._. ._ ._. . _._. ._. ___ .__ ._. . .__. ._ .. ._.
Felix Finch: scarecrow repairman rocket surgeon / fe...@crowfix.com
GPG = E987 4493 C860 246C 3B1E 6477 7838 76E9 182E 8151 ITAR license #4933
I've found a
In KDE, I'm very used to simply type man:foo and have the man page of
foo pop up immediately in Konqueror without having to open a terminal
or anything.
However, since I installed Chromium and making it my default browser,
now man: brings up Chromium instead. That doesn't work; instead of
On Sat 18 Aug 2012 06:21:55 AM IST, Nikos Chantziaras wrote:
In KDE, I'm very used to simply type man:foo and have the man page
of foo pop up immediately in Konqueror without having to open a
terminal or anything.
However, since I installed Chromium and making it my default browser,
now man:
40 matches
Mail list logo
