On Thu, Jun 20, 2019 at 1:30 PM aleiphoenix . wrote:
> See some ebuilds like x11-drivers/nvidia-drivers/nvidia-drivers-430.14.ebuild
>
> if use kernel_linux && kernel_is ge 5 2; then
> ewarn "Gentoo supports kernels which are supported by NVIDIA"
> ewarn
On Thu, Jun 20, 2019 at 11:20 AM Grant Taylor
wrote:
>
> After the good input that I received in the "Preventing new versions of
> gentoo-sources…" thread, I figured I'd ask this question:
>
> Is there a way to cause ebuild file to limit the version of other
> packages, e.g.
Grant Taylor wrote:
> On 6/19/19 9:51 PM, Dale wrote:
>> It seems you like that way and it works best for your situation and that
>> is what matters.
>
> Yep. I'm happy enough, for now. We'll see if I change my opinion in
> the future.
>
>> Sometimes there are many ways to do things but some
On 6/19/19 9:51 PM, Dale wrote:
It seems you like that way and it works best for your situation and that
is what matters.
Yep. I'm happy enough, for now. We'll see if I change my opinion in
the future.
Sometimes there are many ways to do things but some just work better
in certain
Grant Taylor wrote:
> On 6/19/19 8:51 PM, Dale wrote:
>> Honestly, I'm not sure there is a easy way to do this.
>
> I'm actually happy with what Vadim recommended.
>
> It keeps me within the minor (?) version of the kernel that I want to
> stay within, while still allowing updates to new micro (?)
After the good input that I received in the "Preventing new versions of
gentoo-sources…" thread, I figured I'd ask this question:
Is there a way to cause ebuild file to limit the version of other
packages, e.g. net-misc/openvswitch's limiting sys-kernel/gentoo-sources
to a supported kernel
On 6/19/19 8:51 PM, Dale wrote:
Honestly, I'm not sure there is a easy way to do this.
I'm actually happy with what Vadim recommended.
It keeps me within the minor (?) version of the kernel that I want to
stay within, while still allowing updates to new micro (?) versions.
Is Major, Minor,
Daniel Frey wrote:
> On 6/19/19 11:27 AM, Grant Taylor wrote:
>> On 6/19/19 11:37 AM, Vadim A. Misbakh-Soloviov wrote:
>>> echo '>sys-kernel/gentoo-sources-4.15' >>
>>> /etc/portage/package.mask/kernels
>>
>> Perfect!
>>
>> Thank you. :-)
>>
>> I did name the file
On 6/19/19 11:27 AM, Grant Taylor wrote:
On 6/19/19 11:37 AM, Vadim A. Misbakh-Soloviov wrote:
echo '>sys-kernel/gentoo-sources-4.15' >>
/etc/portage/package.mask/kernels
Perfect!
Thank you. :-)
I did name the file /etc/portage/package.mask/gentoo-sources as I like
to name the file after
Hi,
>From what it says, it duplicates any of those. I don't have a 4K device
but if I did, it should be able to split one signal and display the same
image on both devices. According to the info for the device, it takes
the highest resolution that both output devices have in common and the
On 20/6/19 2:26 am, Jack wrote:
> On 2019.06.19 14:10, Neil Bothwick wrote:
>> On Wed, 19 Jun 2019 20:45:03 +0800, Bill Kenworthy wrote:
>>
>> > wifi ~ # unsymlink-lib --analyze
>> > /usr/lib needs to be a symlink to lib64!
>> > wifi ~ # ls -al /usr/lib
>> > lrwxrwxrwx 1 root root 10 Jan 4 13:37
as i read the description, it splits a 4K image into 4 seperate 2K signals for
4 individual 2K displays, i.e. a "Video wall", using 4 2K displays to fake a 4K
display. This does not appear to be what you wanted. You want the same signal
going more than one place without reformatting/division.
Dale wrote:
> Grant Edwards wrote:
>> On 2019-06-19, Dale wrote:
>>
>>> [...] So, the splitter does in fact work but not with my puter's
>>> video card.
>> I suspect that the splitter only works for a handful of specific
>> signal formats. Try configurring your card to output a typical ATSC
>>
Jack wrote:
> On 2019.06.19 17:35, Dale wrote:
>> Jack wrote:
>> > On 2019.06.19 15:43, Dale wrote:
>> >> Howdy,
>> >>
>> >> I have a video issue here. I recently cut off DirecTV service and
>> now
>> >> watch from my puter, all those hard drives people know me for. As
>> some
>> >> know, my Mom
On 2019.06.19 17:37, Grant Taylor wrote:
On 6/19/19 3:29 PM, Jack wrote:
It seems the man page is not complete. It mentions the -k of
--keywords option to the m or meta module, but doesn't actually
mention the y (keywords) module itself (which IS shown by equery -h)
equery y package
is
On 2019.06.19 17:35, Dale wrote:
Jack wrote:
> On 2019.06.19 15:43, Dale wrote:
>> Howdy,
>>
>> I have a video issue here. I recently cut off DirecTV service and
now
>> watch from my puter, all those hard drives people know me for. As
some
>> know, my Mom died recently so I want to make
On 6/19/19 3:29 PM, Jack wrote:
It seems the man page is not complete. It mentions the -k of --keywords
option to the m or meta module, but doesn't actually mention the y
(keywords) module itself (which IS shown by equery -h)
equery y package
is not the same as
equery m -k package
The
Jack wrote:
> On 2019.06.19 15:43, Dale wrote:
>> Howdy,
>>
>> I have a video issue here. I recently cut off DirecTV service and now
>> watch from my puter, all those hard drives people know me for. As some
>> know, my Mom died recently so I want to make use of the living room TV
>> as well. I
On 2019.06.19 17:16, Grant Taylor wrote:
On 6/19/19 3:10 PM, Dale wrote:
I'm not sure this will apply. I know this option works in some uses
but not sure about yours. You may want to try it tho and see if it
does what you want.
-o, --overlay-tree
Include package
Grant Edwards wrote:
> On 2019-06-19, Dale wrote:
>
>> [...] So, the splitter does in fact work but not with my puter's
>> video card.
> I suspect that the splitter only works for a handful of specific
> signal formats. Try configurring your card to output a typical ATSC
> "TV" format (720p 30Hz
On 6/19/19 3:10 PM, Dale wrote:
I'm not sure this will apply. I know this option works in some uses
but not sure about yours. You may want to try it tho and see if it does
what you want.
-o, --overlay-tree
Include package from overlays in the search path.
I use it
Grant Taylor wrote:
> Is there a way to get equery to list keywords from custom overlays
> (configured through /etc/portage/repos.conf/.conf)?
>
> If I put an ebuild file in the main Gentoo portage repo, equery
> keywords works just fine.
>
> If I move the same ebuild file to my local repo,
On 2019.06.19 15:43, Dale wrote:
Howdy,
I have a video issue here. I recently cut off DirecTV service and now
watch from my puter, all those hard drives people know me for. As
some
know, my Mom died recently so I want to make use of the living room TV
as well. I bought a splitter that
On 2019-06-19, Dale wrote:
> [...] So, the splitter does in fact work but not with my puter's
> video card.
I suspect that the splitter only works for a handful of specific
signal formats. Try configurring your card to output a typical ATSC
"TV" format (720p 30Hz or 1080i 60Hz).
--
Grant
On 6/19/19 2:51 PM, Jack wrote:
I suspect I have more ignorance of equery than you do, but have you
tried eix? I don't know all it's possibilities, but I do know it
handles overlays.
No, I have not tried eix yet.
I tend to be reluctant to add additional tools, especially if the
existing
On 2019.06.19 16:14, Neil Bothwick wrote:
On Wed, 19 Jun 2019 14:26:50 -0400, Jack wrote:
> On 2019.06.19 14:10, Neil Bothwick wrote:
> > On Wed, 19 Jun 2019 20:45:03 +0800, Bill Kenworthy wrote:
> >
> > > wifi ~ # unsymlink-lib --analyze
> > > /usr/lib needs to be a symlink to lib64!
> > >
On 2019.06.19 15:58, Grant Taylor wrote:
Is there a way to get equery to list keywords from custom overlays
(configured through /etc/portage/repos.conf/.conf)?
If I put an ebuild file in the main Gentoo portage repo, equery
keywords works just fine.
If I move the same ebuild file to my
On Wed, 19 Jun 2019 14:26:50 -0400, Jack wrote:
> On 2019.06.19 14:10, Neil Bothwick wrote:
> > On Wed, 19 Jun 2019 20:45:03 +0800, Bill Kenworthy wrote:
> >
> > > wifi ~ # unsymlink-lib --analyze
> > > /usr/lib needs to be a symlink to lib64!
> > > wifi ~ # ls -al /usr/lib
> > > lrwxrwxrwx 1
Is there a way to get equery to list keywords from custom overlays
(configured through /etc/portage/repos.conf/.conf)?
If I put an ebuild file in the main Gentoo portage repo, equery keywords
works just fine.
If I move the same ebuild file to my local repo, equery keywords
fails.
(Yes,
On 6/19/19 1:43 PM, Rich Freeman wrote:
These days there are other ways to do the same
You could probably add the Set UID bit to the halt binary and restrict
read & execution to members of the group. Then any user that can read
it, can run it as root via Set UID.
--
Grant. . . .
unix ||
On Wed, Jun 19, 2019 at 3:19 PM Ian Zimmerman wrote:
>
> On 2019-06-19 15:10, Jack wrote:
>
> > Won't "sudo halt" work? I frequently do "sudo reboor" or just
> > "reboot" from a root shell. (I am also systemd free.)
>
> I would prefer to avoid sudo for security reasons (to get root I
> normally
Howdy,
I have a video issue here. I recently cut off DirecTV service and now
watch from my puter, all those hard drives people know me for. As some
know, my Mom died recently so I want to make use of the living room TV
as well. I bought a splitter that takes one input and outputs to 4.
The
On 2019-06-19 15:10, Jack wrote:
> Won't "sudo halt" work? I frequently do "sudo reboor" or just
> "reboot" from a root shell. (I am also systemd free.)
I would prefer to avoid sudo for security reasons (to get root I
normally login on an otherwise unused virtual console). But yes, I'm
pretty
On 2019.06.19 15:00, Ian Zimmerman wrote:
I'd like to have a quick way to halt my system from the keyboard,
without relying on obscure key combinations such as Alt-Up. Logging
in
as a special user (with a special password) would be ideal. And I saw
that a "halt" user already exists, with
I'd like to have a quick way to halt my system from the keyboard,
without relying on obscure key combinations such as Alt-Up. Logging in
as a special user (with a special password) would be ideal. And I saw
that a "halt" user already exists, with /sbin/halt as a login shell, so
someone must have
On 2019-06-19 10:32, Mick wrote:
> Having read the above and more in the example file, I thought the way
> to define a GROUP would be to just add a single directive, e.g.:
>
> GROUP=users
I remember doing just this some time ago and it worked. I think this is
a case of the code leaving the
On 6/19/19 11:37 AM, Vadim A. Misbakh-Soloviov wrote:
echo '>sys-kernel/gentoo-sources-4.15' >> /etc/portage/package.mask/kernels
Perfect!
Thank you. :-)
I did name the file /etc/portage/package.mask/gentoo-sources as I like
to name the file after the package that it's meant to effect.
On 2019.06.19 14:10, Neil Bothwick wrote:
On Wed, 19 Jun 2019 20:45:03 +0800, Bill Kenworthy wrote:
> wifi ~ # unsymlink-lib --analyze
> /usr/lib needs to be a symlink to lib64!
> wifi ~ # ls -al /usr/lib
> lrwxrwxrwx 1 root root 10 Jan 4 13:37 /usr/lib -> /usr/lib64
> wifi ~ #
>
> The symlink
On Wed, 19 Jun 2019 20:45:03 +0800, Bill Kenworthy wrote:
> wifi ~ # unsymlink-lib --analyze
> /usr/lib needs to be a symlink to lib64!
> wifi ~ # ls -al /usr/lib
> lrwxrwxrwx 1 root root 10 Jan 4 13:37 /usr/lib -> /usr/lib64
> wifi ~ #
>
> The symlink looks the same as another unconverted
echo '>sys-kernel/gentoo-sources-4.15' >> /etc/portage/package.mask/kernels
Is there a way that I can prevent emerge from wanting to update
(download / install) gentoo-sources for kernel versions beyond a
specified value?
I want to stick within a specific version of the kernel / gentoo-sources
because of dependencies on Open vSwitch.
I'm okay receiving updates to
I have converted 4 systems to the 17.1 profile but this one fails at the
first hurdle:
wifi ~ # eselect profile list
Available profile symlink targets:
[1] olympus:default/linux/amd64/17.0 (stable) *
[2] olympus:default/linux/amd64/17.0/selinux (stable)
[3]
190618 Ian Zimmerman wrote:
> Does CPU use seem to go way up when xscreensaver starts?
>> No. The problem seems to be with the 3-D savers :
>> Gkrellm shows heavy use of 1 CPU (out of 8 ) at a time when they run.
> Is glxgears running as it should ?
>> I can't find an executable or pkg called
190615 Nikos Chantziaras wrote:
> On 15/06/2019 11:57, Philip Webb wrote:
>> For a long time, I've been having a problem upgrading 'icu'.
>> There seems to be a conflict with KDE :
>>!!! Multiple package instances within a single package slot have been
>> pulled
>>!!! into the dependency
This must be the third if not fourth time the syntax in wpa_supplicant.conf
bit me - I don't learn easily! ;-)
The comments in the example configuration file installed with wpa_supplicant
provided under /usr/share/doc/wpa_supplicant-2.6-r10/wpa_supplicant.conf.bz2
explain a Unix control
190618 Nikos Chantziaras wrote:
> On 18/06/2019 19:06, Philip Webb wrote:
>> I've just upgraded to Gvim 8.1.1486 & most of the icons have disappeared.
> Is kde-plasma/kde-gtk-config installed ?
>> Yes.
> Open the KDE "System Settings", and go to "Application Style".
> Select "GNOME/Gtk Application
46 matches
Mail list logo
