Is anyone else getting flooded with spam in the form of fake paypal security
notices? I've probably had 12 today alone. I can't tell if it's coming
through the list or just pretending...
--
When you walk across the fields with your mind pure and holy, then from
all the stones, and all growing
Hello,
I'm running gentoo on an IBM Thinkpad T43. In the past, disk access was
fine under load (CPU or disk). These days, the disk becomes painfully
slow under moderate to high CPU usage (such as compiling) or copying
more than a few MB. GUI's become almost totally unresponsive and at
times
Andrey Falko wrote:
On Thu, Mar 6, 2008 at 10:38 PM, fire-eyes [EMAIL PROTECTED] wrote:
Hello,
I'm running gentoo on an IBM Thinkpad T43. In the past, disk access was
fine under load (CPU or disk). These days, the disk becomes painfully
slow under moderate to high CPU usage
Thomas Kahle wrote:
Hi,
I had problems with CFS too. Similar to the one's you describe. Under
heavy disk/cpu-load (like emerge and updatedb in parallel) the system
was unresponsive. I changed the scheduler back to anticipatory and the
problem was gone.
Interestingly i also have a thinkpad, X30
Hmm, I don't know . . . The particular address I was trying to connect was
definitely blocked. Other than not beeing able to connect with a browser,
nc, httping and tcptraceroute confirmed it). Could it be an area/account
specific block perhaps? When I questioned the owner he said that this
Collin: it may not be a 5-second rule. It may just be cutting it off
after a certain amount of traffic has passed based on the protocol/port
used. But I'm just speculating. Let's hear what fire-eyes has to say.
--
- Mark Shields
I don't have the pcap file yet ;) Not much I can do
and over again to get this
working. Any tips would be much appreciated.
fire-eyes / Fieldy
--
gentoo-user@lists.gentoo.org mailing list
Hello,
Just ran across a nifty trick for firefox, and wanted to get it on the
list, as well as searched by search engines. Hope this is useful.
I enabled my mouse wheels left-right functionality, however, it was
reversed to xorg. So I flipped it in xorgs config.
Seamonkey got it right
Platoali wrote:
Well, last night the graphic card of my laptop got broken. So I'm
considering to replace it with a workstation for some graphic
applications (Mainly blender and gimp.) I need 3d acceleration, and my
poor laptop was rendering for hours to get my job done. So I decide to
buy a
Hello,
I keep running into errors while using an external eSATA drive. I have
searched for information regarding this issue, and there just is not
much out there. The best information I've seen mentions that a user was
having this issue, but it went away as long as the disk was connected to
Stratos Psomadakis wrote:
i just did an update,and firefox 2.0.0.5 has been added to the tree(~
masked)...
but i just read a post at slashdot.org that says about a password
vulnerability of 2.0.0.5...
here's the link: http://it.slashdot.org/article.pl?sid=07/07/23/1450224
i just want to ask
I'm using xorg 7.2.0 with open source drivers on an ati card. How would
I calibrate my monitor? i.e. what a photographer or graphics person
would want to to, do ensure I'm seeing accurate colors on my screen?
(I hope these don't expire)
xorg.conf: http://rafb.net/p/ONo2dK80.html
Xorg.0.log:
Hello,
I'm using Xorg 7.3 and am trying to prevent loading of glx module (very
unstable on my laptop). Commenting out Load glx doesn't stop it. Using
Disable glx doesn't stop it. Doing the same for dri doesn't stop it.
In fact the logs say for each of those, on one line that they are
disabled,
Hello,
Is anyone on the list using a Dell XPS 420 with an Nvidia card (I avoid
ati)? I am curious as to how it is working out for you, as I am
considering getting one.
Also, if you went with their non-descript wireless card, did it work in
linux? How about the onboard ethernet?
I am interested
Alan McKinnon wrote:
On Saturday 12 January 2008, [EMAIL PROTECTED] wrote:
Daniel Robbins offers to take back Gentoo leadership.
What about it ? Read
http://blog.funtoo.org/2008/01/here-my-offer.html
I've kept very quiet about Gentoo politics for a long time, but Daniel's
blog has promoted
I dropped my alsa issue into a pastebin, so I'm just going to lazily
copy it here. Thanks for reading :)
I am using kernel 2.6.14.4 , compiled myself and installed myself.
I am using alsa-driver-1.0.10 and alsa-lib-1.0.10.
When I try to start the alsasound script, I get pages of errors
fire-eyes wrote:
I drop[snip]
Okay this has been resolved. I have been using alsa kernel drivers, and
something along the way pulled in alsa-driver. Odd though, I can't
figure out what, equery d alsa-driver shows nothing..
Reinstalling the kernel did the trick.
Thanks for the reads
I am having problems playing DVD movies. The Movies are:
Bourne Identity
Primus - Hallucinogenetics concert
Both of these work on my desktop system, also running gentoo with the same
USE flags in mplayer and xine.
This is a brand new IBM Thinkpad T43, running gentoo.
Here's what we get with
The dvd drive came regionless so I had to set it.
Now I'm getting different software related issues, but at least it's not
hardware anymore.
--
gentoo-user@gentoo.org mailing list
Cláudio Henrique wrote:
I managed to have doom3 working on my system, but now the problem is
with the sound. It is like the one of a robot. I have tried using
alsa, but the problem remains. How can I fix this?
[]'s
claudio.
I see the same problem. Though I have only tried the demo. I see
Ernie Schroder wrote:
I haven't seen any new posts in 3 and a half hours. That must be a new record.
Oh yeah? I guess this is a good time to post my problem then and break
that (other than this message).
--
gentoo-user@gentoo.org mailing list
I am having problems with dhcp on my wireless interface. Which is
confusing, it worked fine before. It just times out. If I assign
everything manually, there are no issues.
Some ask if it's because association with the AP is taking too long, but
I know it is not that, because I am manually
fire-eyes wrote:
I am having problems with dhcp on my wireless interface. Which is
confusing, it worked fine before. It just times out. If I assign
everything manually, there are no issues.
Some ask if it's because association with the AP is taking too long, but
I know
I just upgraded to xorg-server-7.0.0-rc1, and I can now no longer switch
to VC's. I used to be able to do this by holding ctl-alt and pressing
F1, for example.
Does anyone out there happen to know how I can once again do this?
--
gentoo-user@gentoo.org mailing list
Yee haw.
I'm using xorg-x11-7.0.0-r1. I am using their radeon driver, and trying
to get glx to load. It is my understanding that it now has 3d support (glx).
However when I try to start glxgears, I get this:
$ glxgears
Xlib: extension GLX missing on display :0.0.
Error: couldn't get an RGB,
Hemmann, Volker Armin wrote:
On Sunday 29 January 2006 18:11, fire-eyes wrote:
I just upgraded to xorg-server-7.0.0-rc1, and I can now no longer switch
to VC's. I used to be able to do this by holding ctl-alt and pressing
F1, for example.
Does anyone out there happen to know how I can once
fire-eyes wrote:
Yee haw.
I'm using xorg-x11-7.0.0-r1. I am using their radeon driver, and trying
to get glx to load. It is my understanding that it now has 3d support (glx).
However when I try to start glxgears, I get this:
$ glxgears
Xlib: extension GLX missing on display :0.0
Michael Sullivan wrote:
I wrote a script a long time ago for resizing pictures uploaded to a
certain directory on my server box. The script was supposed to check to
see if any JPG files in the directory had not been resized, and if they
hadn't, it was supposed to resize them. It did some
Hemmann, Volker Armin wrote:
On Sunday 29 January 2006 18:36, fire-eyes wrote:
Hemmann, Volker Armin wrote:
On Sunday 29 January 2006 18:11, fire-eyes wrote:
I just upgraded to xorg-server-7.0.0-rc1, and I can now no longer switch
to VC's. I used to be able to do this by holding ctl-alt
Hemmann, Volker Armin wrote:
On Sunday 29 January 2006 19:44, fire-eyes wrote:
Hemmann, Volker Armin wrote:
On Sunday 29 January 2006 18:36, fire-eyes wrote:
Hemmann, Volker Armin wrote:
On Sunday 29 January 2006 18:11, fire-eyes wrote:
I just upgraded to xorg-server-7.0.0-rc1, and I can
Jeff wrote:
Just wondering - how would my system benefit from using ntpl/ntplonly? I
don't see very much 'official' documentation of these USE flags, but
Googling, I see a lot of people using it to 'optimize' their gcc/system.
Anyone care to comment?
Myself I tried ntpl (and also ntplonly
Steve B. wrote:
Hey everybody,
This is kind of stupid problem, but I just can't seem to figure this one
out. I can't emerge UT2004. I set my CD_ROOT to my cdrom (/media/hdc) and
the first CD copies fine, but it never gives me time to umount and mount the
second CD. It simply tries
Steve B. wrote:
On Friday 03 February 2006 23:06, fire-eyes wrote:
Steve B. wrote:
Hey everybody,
This is kind of stupid problem, but I just can't seem to figure this
one out. I can't emerge UT2004. I set my CD_ROOT to my cdrom
(/media/hdc) and the first CD copies fine, but it never gives
I get console-switching back?
Option DontVTSwitch Off
in the xorg.conf
This doesn't appear to work. Although I don't understand why I should need to
specify a value for DontVTSwitch anyway. Is Off no longer the default?
Thanks
Robert
I noticed this problem when I went to xorg 7 as
This problem is because of the keyboard layout. If you
use KDE go to Control Center / Regional
Accessibility / Keyboard Layout and select the right
one for your keyboard.
Thanks for the advice. I have done this, logged out of kde, and logged
back in, however it still does not work at this
chloe K wrote:
Hi all
what is the different between light httpd vs typical apache?
how can i tun sysclt for httpd to increase performance
thank you
-
Yahoo! Canada Toolbar : Search from anywhere on the web
KH wrote:
Hi,
I cannot reach:
http://gentoo-portage.com/
http://gentoo-wiki.com
Are those websites off the air right now? Does anybody know when they
will be back?
Are there any substitutes to those web pages? I still miss
packages.gentoo.org as it used to be :-(
see also:
Sorry if this is a repost, it seems to have disappeared into the bit
bucket.
I put a 3Com 3C996B-T 1000Mbps NIC in my system. It uses the tg3
(broadcom) driver, which I have compiled in.
The kernel messages show the link at 1000. The light on the NIC shows
this. The lights on the switch show
Welp it was a routing issue. I made a specific routing entry for the
system I was testing from, and it worked out to about 18 - 20MB/s. The
limiting factor is the old scsi disks.
--
gentoo-user@gentoo.org mailing list
Ok, this is free advice and may or may not be worth any more than that
-- I'm new here, but since nobody answered
Is your kernel configured for 1Gb as-such under the networking?
(In win now to do mail; not set up undel linux yet, so I can't check
exactly what/where.)
Also may need to
How do I unmerge all versions of KDE? I understand kde is a meta
package, so emerge -C kde isn't going to do this (though I sure wish it
would).
--
gentoo-user@gentoo.org mailing list
On Sun, 2005-04-17 at 18:17 +0200, Jarry wrote:
Hi,
I'm installing Gentoo 2005.0 using universal installation CD
on a small, general purpose server (apache+mysql+php, mail,
some net-games, teamspeak, ftp, shells, 20-30 users, etc.).
Up to now I always used ext2, but now I want to try some
I have two NIC's in a server. One always comes up as eth0, the other
always eth1. One is on-board, the other is an add-on.
I'd like to swap them around, that is to say, have the NIC that is
currently eth0 become eth1, and the NIC which is eth1 become eth0.
Is this possible?
--
On Wed, 2005-04-20 at 19:53 +0200, Richard Fish wrote:
fire-eyes wrote:
I have two NIC's in a server. One always comes up as eth0, the other
always eth1. One is on-board, the other is an add-on.
I'd like to swap them around, that is to say, have the NIC that is
currently eth0 become eth1
So I'm using a 2.6 kernel, and trying to figure out how to cause eth0
and eth1 to swap. That is, eth0 start up as eth1, and eth1 start up as
eth0.
I was told here about the netdev argument to the kernel. I tried about 9
different ways of using this, but the documentation isn't exactly as
clear as
On Thu, 2005-04-21 at 22:12 +0800, Ow Mun Heng wrote:
On Thu, 2005-04-21 at 10:04 -0400, fire-eyes wrote:
So I'm using a 2.6 kernel, and trying to figure out how to cause eth0
and eth1 to swap. That is, eth0 start up as eth1, and eth1 start up as
eth0.
Perhaps you can try
On Thu, 2005-04-21 at 15:33 +0100, Jonathan Wright wrote:
fire-eyes wrote:
Well, my fault for not mentioning. But I don't enable module loading
support on servers, it is a security risk.
Fair enough. I've done the same on my servers. What's the possibility of
moving the cards around
On Thu, 2005-04-21 at 16:14 +0100, Jonathan Wright wrote:
fire-eyes wrote:
My understanding was that ether= was for 2.4 kernels, in fact the docs
for 2.6 say netdev= is the replace ment, but at this point i'm willing
to try.
Continuing the search, I've found this page:
http
On Thu, 2005-04-21 at 17:46 +0200, Bert Buchholz wrote:
On Thu 21.04 10:04, fire-eyes wrote:
So I'm using a 2.6 kernel, and trying to figure out how to cause eth0
and eth1 to swap. That is, eth0 start up as eth1, and eth1 start up as
eth0.
Simply use nameif to name your NICs based
Just wanted to pass on that nameif was the solution to my NIC device
swapping issues. I had mentioned that it kept setfaulting, though it was
indeed doing its job.
I found a bugreport, and it turns out that if the config file you pass
nameif has more than 3 lines, it segfaults. This is fixed in
I have installed a 1000Mbps NIC in my system. This is the system some of
you read about me where I was trying to swap the names of eth0 and eth1
so maybe that has something to do with my problem.
The light on the NIC shows 1000Mbps link, as does the switch it is
connected to. Kernel messages show
First off, thanks to those who responded kindly, it is really
appreciated.
I feel very silly, but apparently the problem is the system itself. All
this time I was testing for speed by connecting to it from another
system, and fetching a file via ftp. I never PUT one until yesterday,
and then I
I'm keeping a series of full system backups. However i'd like to remove
anything portage related *that could be replaced by just an emerge
sync*. can I just remove /usr/portage/* in these older backups?
--
gentoo-user@gentoo.org mailing list
I'm looking for a web based job ticket system. We use apache 2 and mysql
currently, and also have php 4/5.
Any suggestions?
--
gentoo-user@gentoo.org mailing list
On Mon, 2005-05-02 at 17:32 -0500, kashani wrote:
Is there something especially complicated about going into your
settings
in Thunderbird and setting gentoo.org as a domain that prefers text
emails?
He doesn't want to, it's his choice. It is also my choice to filter
mails from him which are
On Mon, 2005-05-09 at 03:19 +0100, Ciaran McCreesh wrote:
On Sun, 08 May 2005 21:42:55 -0400 fire-eyes [EMAIL PROTECTED]
wrote:
| There's quite a lot of messages today with zero subject, all I see is
| [gentoo-user]. This gets confusing when you get a ton of mail a day.
| It might
On Tue, 2005-05-10 at 08:35 -0400, fire-eyes wrote:
I'm using evolution 2.2.1.1. Up until today, in the lower left corner
there were three buttons: Mail, Contacts, Calendar, and one other I
forget. Today, I only see Mail and Contacts. This is rather alarming, as
I use the Calendar features
On Tue, 2005-05-10 at 08:43 -0400, fire-eyes wrote:
Eh, looks like I found the problem. On STDOUT when starting evolution:
evolution-2.2:6552): evolution-shell-WARNING **: Cannot activate
'OAFIID:GNOME_Evolution_Calendar_Component:2.2': g_module_open of
`/usr/lib/evolution/2.2/components
On Tue, 2005-05-10 at 09:15 -0400, fire-eyes wrote:
On Tue, 2005-05-10 at 08:43 -0400, fire-eyes wrote:
Eh, looks like I found the problem. On STDOUT when starting evolution:
evolution-2.2:6552): evolution-shell-WARNING **: Cannot activate
'OAFIID:GNOME_Evolution_Calendar_Component:2.2
On Tue, 2005-05-10 at 15:14 +0100, Edward Catmur wrote:
Continuing this, I did a revdep-rebuild -p. It wanted to remerge
evolution-data-server, but when doing that I get a flood of errors
ending in this:
/usr/lib/libsoup-2.2.so: undefined reference to
[EMAIL PROTECTED]'
Have you
On Wed, 2005-05-11 at 13:53 +, James wrote:
Hello All,
OpenOffice 2.0 looks significantly enhanced. Does anybody have
a guestimate or insight as to when it will be available, via
emerge?
Has anybody compiled OO 2.0 directly? If so what are your
results and is it stable?
As someone
By the way, I merged openoffice-bin 1.9.93 . I don't see the beta
versions in the standard (non-bin) ebuild.
--
gentoo-user@gentoo.org mailing list
On Tue, 2005-05-17 at 16:21 +0100, Jorge Almeida wrote:
Nope. It is there and it is disabled. The problem is that the program
keeps asking whether I want to enable it!
I have read a few things on this issue, though I do not use the product.
It actually goes to a wider problem, where if
On Tue, 2005-05-17 at 09:20 -0700, Richard Fish wrote:
Has it annoyed you enough yet to turn on JavaScript?
Hopefully not, documents which have been written to do so can then
litrally call home.
--
gentoo-user@gentoo.org mailing list
On Tue, 2005-05-17 at 17:51 +0100, Jorge Almeida wrote:
I _will not_ enable JavaSpook.
What remains to be decided is whether I'll give up using Acrobat
Reader.
I guess I don't see what is special about Acrobat's own reader. I have
problems with it because
1) It is Adobe
2) It is binary
I'm trying to use pptpclient-1.6.0.
On its home page it says I need MPPE support in the kernel and PPPD. For
PPPD it was easy, a nice little USE flag. As far as MPPE support, it
says that if I modprobe ppp-compress-18 and that works, I should be all
set.
However I get:
Fatal: Module
I am following this document
http://pptpclient.sourceforge.net/howto-gentoo.phtml
And when I get to emerging pptpconfig:
# emerge -pv pptpconfig
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[blocks B ] =dev-php/php-4.99.99 (is blocking
On Tue, 2005-05-24 at 20:15 +0300, Rumen Yotov wrote:
Hi,
Think your first problem is that you are mixing php mod_php they are
different things.
Please run: emerge php -pv and post the output to see what version
you
have if any.
PHP isn't slotted, so you could have either 4.3.x or 5.0.x
On Thu, 2005-06-02 at 12:37 -0400, A. Khattri wrote:
On Thu, 2 Jun 2005, fire-eyes wrote:
However, when I run it from cron as the same shell script (and redirect
STDERR and STDOUT to files):
ppp0: error fetching interface information: Device not found
Is it running as root from
On Thu, 2005-06-02 at 21:27 +0200, Chris Prior wrote:
Try using ssh -Y instead of ssh -X.
(or set trusted forwarding in ssh_config)
Hrm. That did it. I'm curious, can you tell me a bit more than th eman
page about what -Y is? It basically says it's trusted, but doesn't go
any further.
Thank
First off, thanks to those on the list who replied to my intitial
problem, where it seemed that the environment for a script which cron
was running was different from when it was run directly as root.
I made the second line (after #!/bin/sh) source /etc/profile , and pow
it started working.
On Sat, 2005-06-04 at 20:46 -0700, rob3 wrote:
My $million advice. Go to www..gnu.org, and just download the Grub
source and compile it. Just make a note somewhere on your copy of the
Gentoo manual (you did print it out didn't you? haha) that grub is
not in the emerge system.
It's not?
#
Perhaps I'm confused here, but I'm looking int freenx. Using esearch
freenx, this was the only item I found:
net-misc/nxserver-freenx
Now the name of it implies it's just a server, is the client in there
too, or is this seperate?
--
gentoo-user@gentoo.org mailing list
I just installed nxserver-freenx, however it doesn't appear any
documents were installed with it. Meaning I have no idea how to even set
it up.
Any pointers?
--
gentoo-user@gentoo.org mailing list
On Fri, 2005-06-10 at 10:52 -0700, Zac Medico wrote:
--- fire-eyes [EMAIL PROTECTED] wrote:
I just installed nxserver-freenx, however it doesn't
appear any
documents were installed with it. Meaning I have no
idea how to even set
it up.
Any pointers?
You need to run
Okay so I got this nxserver stuff going fine. I can connect to the
server machine over its ssh port. But then it seems that something
called nxproxy is trying to connect from the client, to the server, on
TCP port 5000.
I've looked for documents or a config file for nxproxy, because I can't
use
On Sat, 2005-06-18 at 14:01 +0200, Mauro Arnoldi wrote:
Hi to everyone
I have upgraded my gentoo system (emerge -Du system) and I included an
upgrade even of GCC and other basic system programs. Now I have a problem
with samba:
/etc/init.d/samba start
* samba - start: smbd ...
On Sat, 2005-06-18 at 13:18 -0400, Brett I. Holcomb wrote:
I don't know about there being a manual but one way is to have etc-update
show you the differences - that shows what's being taken out and what's
added.
That and full backups. A good idea, folks. Can save a lot of trouble.
--
On Sat, 2005-06-18 at 13:24 -0400, Michael Haan wrote:
Apache2 is trying to download php files, not run them. What gives?
You need to set the types up in apache's config. I haven't done this in
a while so I don't quite remember. That and the way apache is configured
in gentoo has changed wildly
I've run into a strange ethereal error. I use system A to log into
system B, via ssh -Y, then run ethereal from there. It shows up on
system A.
This has worked fine for a while, but now as you'll see in the
screenshot, the buttons along the top are missing their graphics, and
where you usually
On Tue, 2005-06-21 at 08:53 -0400, fire-eyes wrote:
I've run into a strange ethereal error. I use system A to log into
system B, via ssh -Y, then run ethereal from there. It shows up on
system A.
This has worked fine for a while, but now as you'll see in the
screenshot, the buttons along
On Tue, 2005-06-21 at 17:23 +0200, Hans-Werner Hilse wrote:
Hi,
On Tue, 21 Jun 2005 08:53:43 -0400
fire-eyes [EMAIL PROTECTED] wrote:
I've run into a strange ethereal error. I use system A to log into
system B, via ssh -Y, then run ethereal from there. It shows up on
system
How do I use smartctl (smartmontools) on a single disk in a scsi raid
array? I've done it before, I just forget how. /dev/sda is the entire
array, not an individual disk.
--
gentoo-user@gentoo.org mailing list
Hello, I am using udev-070 and I cannot find my dvd drive.
The kernel certainly finds it:
hdd: PLEXTOR DVDR PX-708A, ATAPI CD/DVD-ROM drive
However /dev/hdd doesn't even exist. Furthermore, neither do /dev/dvd or
/dev/dvdrom or /dev/cdrom or anything of the sort. Leaving me zero
access to read
Zac Medico wrote:
Your build logs show that in both cases you got segmentation faults when
running perl. I suggest that you roll back to the last working version of
perl that you had.
Zac
Well, it was the same version of perl actually, however I have remerged
it and still run into the
Rumen Yotov wrote:
Hi,
Check if your perl is compiled with ithreads USE-flag.
I have it ON with no problems but there's an warning in it's
description (if enabled).
HTH.Rumen
You're right, it is on. Which is interesting, because I had problems in
the past with that, and I thought I had
fire-eyes wrote:
Rumen Yotov wrote:
Hi,
Check if your perl is compiled with ithreads USE-flag.
I have it ON with no problems but there's an warning in it's
description (if enabled).
HTH.Rumen
You're right, it is on. Which is interesting, because I had problems in
the past
I solved this issue. Rather, we solved this issue. I'd like to thank
those who helped me, I am so happy.
The problem was ithreads USE flag in both libperl and perl. Removing
those, remerging libperl, running perl-cleaner all, then remerging perl,
and again running perl-cleaner all, resulted in
Mark Knecht wrote:
Hi,
It seems that on two of my machines, after recent updates, I no
longer have /dev/cdroms and therefore cannot mount CDs, etc. I can
mount them by hand using the old style /dev/hda. The hardware works.
It just seems that udev is now doing something different.
Has
Mark Knecht wrote:
Done.
In my case the drives are there and working, but the /dev/ names are
more old style.
Wanna trade systems? :)
--
gentoo-user@gentoo.org mailing list
John Lange wrote:
I'd like to test the newest version of OpenOffice which is 2.0rc1.
I have 1.1.4 installed currently.
When I do emerge --search openoffice it does not show a 2.0 version as
being available. Is this because I need to unmask something or because
nothing past 1.1.4 is
fire-eyes wrote:
Currently, those are only available with openoffice-bin. I am using
2.0.0rc1 right now. All you need to do is use the appropriate unmask in
/etc/portage/package.unmask (you may need to create /etc/portage/ first:
=app-office/openoffice-bin-1.9.93
Looks like some clients
Oliver Friedrich wrote:
Mark Knecht wrote:
What simple command can Ido to write data to the whole drive?
Hi Mark,
well, its not Gentoo, but DBAN is specialy Designed for secure wiping...
http://dban.sourceforge.net/
Give it a try...
BeowulfOF
There is also bcwipe (in
Iain Buchanan wrote:
Not long ago, I griped about 2.6.13 being _very_ slow to boot and run.
My original email is at the bottom.
I've since recompiled the kernel without SMP and Hyperthreading, and the
system is _much_ faster.
So, there is a problem with 2.6.13 and SMP or Hyperthreaded
When I try to run evolution-2.4.1, i get *** glibc detected *** free():
invalid pointer: 0x08144e90 *** on STDOUT and it doesn't start.
It doesn't exit either, i have to ctl-c in the terminal. I got this with
2.2 as well. I have been completely unable to run evolution because of this.
Any ideas
Gentoo Shadow wrote:
dear friends,
1) how to band(block) porno web url(s)+web contents using squid-cache
server?
2) which filtering tool is de best for a internet-cafe?
Have a look at Dans Guardian, it works with squid to do just that. I
know of entire ISP's using it.
I think the ebuild
Note: mkisofs (in cdrtools) is what you create the ISO with, growisofs
is what you use to write the iso to DVD with.
Yeah, I think growisofs is a confusing name, too.
--
gentoo-user@gentoo.org mailing list
I installed gnome 2.12.1. I am running xfce4 on display :0 . I tried to
start gnome session on :1 via: startx /usr/bin/gnome-session -- :1 ,
however it bails with gnome-session: you're already running a session
manager. Any ideas? I am not running another gnome session.
I was able to do this in
Michael Sullivan wrote:
I don't really know who to ask about this error. I searched for an
explanation on Google and it gave me a link to the Gentoo German forums,
so I thought maybe someone here could help me with this.
I wrote a Qt program. It compiles just fine, but when I try to run it
Michael Sullivan wrote:
On Fri, 2005-11-18 at 15:00 -0500, fire-eyes wrote:
Michael Sullivan wrote:
I don't really know who to ask about this error. I searched for an
explanation on Google and it gave me a link to the Gentoo German forums,
so I thought maybe someone here could help me
1 - 100 of 190 matches
Mail list logo