[gentoo-user] cdrdao woes
List, I'm trying to make copies of my bands CDs with little success. I've done this before but have since switched hardware and upgraded my kernel. I want to use cdrdao (which I used before) but it currently stops with no error message and exit code ($?) 1. cdrecord can see my DVD drive attached to my IDE channel. Here's my output: carbon ~ # cdrecord -scanbus Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling cdrecord: Warning: Running on Linux-2.6.12-gentoo-r9 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. Linux sg driver version: 3.5.33 Using libscg version 'schily-0.8'. scsibus0: 0,0,0 0) 'MATSHITA' 'DVD-RAM SW-9585 ' 'B100' Removable CD-ROM 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * cdrdao scanbus shows nothing!: carbon ~ # cdrdao scanbus Cdrdao version 1.2.0 - (C) Andreas Mueller [EMAIL PROTECTED] SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'schily-0.8' My kernel was booted with this setting: hdc=ide-scsi, I read to do set that in the kernel help under make menuconfig. I also want to be able to burn UDF/data DVDs with this thing too, but music first. I've looked at the HowTos on the Gentoo WIKI but those haven't helped, and I'm trying everything as root so I don't think permissions are involved. I've tried to re-emerge cdrtools and cdrdao without success. Any ideas where to go next? /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cdrdao woes
Dave Nebinger wrote: My kernel was booted with this setting: hdc=ide-scsi, I read to do set Sure, remove the hdc=ide-scsi option, reboot, then use the device path directly for IDE burning. In your case it's probably something like: dev=/dev/hdc I do all of my burning using IDE directly, even though Schily's tools whine about it. Ok, so I removed that foolishness from my kernel bootline and rebooted. When I run cdrdao with scanbus I get this: carbon ~ # cdrdao scanbus Cdrdao version 1.2.0 - (C) Andreas Mueller [EMAIL PROTECTED] SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'schily-0.8' ATA:1,0,0MATSHITA, DVD-RAM SW-9585 , B100 But this: carbon ~ # cdrdao write --device ATA:1,0,0 --reload --force cp_csp.cdtoc Cdrdao version 1.2.0 - (C) Andreas Mueller [EMAIL PROTECTED] SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Still simply exits with a status of 1, what is going on? I've looked in the logs and don't see anything and I'm still stuck :( /djb -- gentoo-user@gentoo.org mailing list
[gentoo-user] cannot load libc, permission denied
Ok, two combined into one here:
A. Khattri asked if I was logged in as root, yes I am.
and
When I said this:
cdrtx / # ldd /usr/bin/crontab
linux-gate.so.1 = (0xe000)
libc.so.6 = /lib/libc.so.6 (0xb7ec4000)
/lib/ld-linux.so.2 (0x8000)
Ian Hastie said:
But it's fcrontab that's having the problems. Why did you do the ldd
on crontab? What is fcrontab anyway and where does it come from?
Well, I did the ldd on crontab, cause crontab is the command I use to edit the crontab files, like `crontab -e`. My
cron daemon of choice is fcron, A command scheduler with extended capabilities over cron and anacron. An on systems
that use fcron we have this:
cdrtx cdr_tx # ls -l /usr/bin/crontab
lrwxrwxrwx 1 root root 8 Aug 26 23:45 /usr/bin/crontab - fcrontab
So fcrontab is the fcron version of crontab symlinked to look like plain ass
crontab. It comes with the fcron package.
Anywho...after rebuilding glibc and fcron I'm still having the same issue:
cdrtx cdr_tx # crontab -e
crontab: error while loading shared libraries: libc.so.6: cannot open shared
object file: Permission denied
But I can still say things like:
cdrtx cdr_tx # strings /lib/libc.so.6 |wc -l
4494
Which prove to me that I can both open and read the /lib/libc.so.6 file.
So then I tried strace, like this:
cdrtx cdr_tx # strace crontab -e
execve(/usr/bin/crontab, [crontab, -e], [/* 31 vars */]) = 0
uname({sys=Linux, node=cdrtx, ...}) = 0
brk(0) = 0x8052000
fcntl64(0, F_GETFD) = 0
fcntl64(1, F_GETFD) = 0
fcntl64(2, F_GETFD) = 0
access(/etc/suid-debug, F_OK) = -1 ENOENT (No such file or directory)
access(/etc/ld.so.preload, R_OK) = -1 ENOENT (No such file or directory)
open(/etc/ld.so.cache, O_RDONLY) = -1 EACCES (Permission denied)
open(/lib/tls/i686/sse2/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/lib/tls/i686/sse2, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/lib/tls/i686/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/lib/tls/i686, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/lib/tls/sse2/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/lib/tls/sse2, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/lib/tls/libc.so.6, O_RDONLY)= -1 EACCES (Permission denied)
stat64(/lib/tls, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/lib/i686/sse2/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/lib/i686/sse2, 0xbfd3ab48)= -1 EACCES (Permission denied)
open(/lib/i686/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/lib/i686, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/lib/sse2/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/lib/sse2, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/lib/libc.so.6, O_RDONLY)= -1 EACCES (Permission denied)
stat64(/lib, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/usr/lib/tls/i686/sse2/libc.so.6, O_RDONLY) = -1 EACCES (Permission
denied)
stat64(/usr/lib/tls/i686/sse2, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/usr/lib/tls/i686/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/usr/lib/tls/i686, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/usr/lib/tls/sse2/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/usr/lib/tls/sse2, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/usr/lib/tls/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/usr/lib/tls, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/usr/lib/i686/sse2/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/usr/lib/i686/sse2, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/usr/lib/i686/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/usr/lib/i686, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/usr/lib/sse2/libc.so.6, O_RDONLY) = -1 EACCES (Permission denied)
stat64(/usr/lib/sse2, 0xbfd3ab48) = -1 EACCES (Permission denied)
open(/usr/lib/libc.so.6, O_RDONLY)= -1 EACCES (Permission denied)
stat64(/usr/lib, 0xbfd3ab48) = -1 EACCES (Permission denied)
writev(2, [{crontab, 7}, {: , 2}, {error while loading shared libra..., 36}, {: , 2}, {libc.so.6, 9}, {: ,
2}, {cannot open shared object file, 30}, {: , 2}, {Permission denied, 17}, {\n, 1}], 10crontab: error while
loading shared libraries: libc.so.6: cannot open shared object file: Permission denied
) = 108
exit_group(127) = ?
I cannot open /etc/ld.so.cache! What? See:
cdrtx cdr_tx # ls -l /etc/ld.so.cache
-rw-r--r-- 1 root root 18311 Aug 27 21:13 /etc/ld.so.cache
Should be able to read that as well, root nor anyother use cannot run crontab. My fcron.allow,deny and conf files all
look perfect and should allow any user at all to run.
Any other ideas?
/djb
--
gentoo-user@gentoo.org mailing list
Re: [gentoo-user] SuperMicro P4SCT+ and SATA
Thank you, this was already solved. http://www.edoceo.com/liber/marvell-sata.php /djb Norbert Kamenicky wrote: David Busby wrote: *snip* Hi David, AFAIK ata_piix.c is developed for intel SATA controllers integrated on PIIX chipsets only. Why do you expect it should support Adaptec or Marvell controllers too? U need some another driver for it, therefore start kernel configuration, have a look at SCSI device support --- SCSI low-level drivers --- [*] Serial ATA (SATA) support and find if something on next lines fits to your controller. If not, then ggle can be helpful to find it (if it exist). HTH, noro -- gentoo-user@gentoo.org mailing list
[gentoo-user] ssh/sftp oddness
List, When I use this Windows based SSH tool to connect to my new dev box with sftp it get's two dialogs about 'enter auth response' as if the sftp-subsystem is spitting out extra control characters. That's not a real big issue but what is that jEdit on Win or Lin cannot connect, it says authentication failure, but the logs on the dev box show that the jEdit was authenticated, odd. Where would it be spitting out these extras? How can I fix this? Has anyone else seen it? /djb -- gentoo-user@gentoo.org mailing list
[gentoo-user] cannot load libc, permission denied
List, I'm getting this: cdrtx / # fcrontab -e fcrontab: error while loading shared libraries: libc.so.6: cannot open shared object file: Permission denied But libc looks OK to me cdrtx / # ls -l /lib/libc* -rwxr-xr-x 1 root root 1211416 Aug 20 22:36 /lib/libc-2.3.5.so lrwxrwxrwx 1 root root 13 Aug 20 22:36 /lib/libc.so.6 - libc-2.3.5.so and revdep-rebuild said it's OK and `equery k` said cdrtx / # equery k libc [ Checking sys-libs/glibc-2.3.5-r1 ] * 3086 out of 3086 files good cdrtx / # equery k fcron [ Checking sys-process/fcron-2.0.2 ] * 47 out of 47 files good So what gives? I saw some stuffs on the internet that it could be SELinux, but I dont' think I have that, I'm running a 2005.1 system, freshly installed a few days ago. Only odd thing I have some sun Java, see: cdrtx / # equery l sun-jre-bin [ Searching for package 'sun-jre-bin' in all categories among: ] * installed packages [I--] [ ] dev-java/sun-jre-bin-1.4.2.08-r1 (1.4) [I--] [M ] dev-java/sun-jre-bin-1.5.0.04 (1.5) Ideas? /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cannot load libc, permission denied
A. Khattri wrote: On Fri, 26 Aug 2005, David Busby wrote: cdrtx / # fcrontab -e fcrontab: error while loading shared libraries: libc.so.6: cannot open shared object file: Permission denied But libc looks OK to me cdrtx / # ls -l /lib/libc* -rwxr-xr-x 1 root root 1211416 Aug 20 22:36 /lib/libc-2.3.5.so lrwxrwxrwx 1 root root 13 Aug 20 22:36 /lib/libc.so.6 - libc-2.3.5.so Try rebuilding fcrontab? I've re-build both glibc and fcron, no dice. I've looked at ldd for crontab cdrtx / # ldd /usr/bin/crontab linux-gate.so.1 = (0xe000) libc.so.6 = /lib/libc.so.6 (0xb7ec4000) /lib/ld-linux.so.2 (0x8000) Looks fine! What's the deal? /djb -- gentoo-user@gentoo.org mailing list
[gentoo-user] initrd and raid
List, I've got a Super Micro P4SCT+ that uses the Marvell SATA controller that Linux doesn't know out-of-the-box. There was the mv_sata module provided by ABit that I found, and it compiles and loads into my 2.6.12 kernel. I can see the drives and have made a raid out of them no problem. I'm currently booting off the Intel SATA in the machine from /dev/sda The other drives are /dev/sdb,c,d. OK, so what I want to do is this: Remove the current /dev/sda and bump the /dev/sdb,c,d each up by one and then boot of them. /dev/sdb1,c1,d1 are set as RAID0+hotspare and configured/grub-ed etc. What I can't do is get the initrd to work. I've added the module and can see when it boots that it finds those devices but then it looks like it cannot see my devices. I get a Kernel Panic not init found, then it says to try passing init= to the kernel. I don't understand that, what must I do? I'm using udev so perhaps when the kernel is booting it cannot see my devices in /dev ? Other google searches show that might be the case. One set of google results pointing to gentoo-user about udev and initrd said don't use initrd, build the module into the kernel. I can't do that with a 3rd party module can I? Here's the story about my install so far (incomplete) http://www.edoceo.com/liber/marvell-sata.php /djb -- [EMAIL PROTECTED] mailing list
[gentoo-user] SuperMicro P4SCT+ and SATA
List, I'm trying to get 2005.1 onto this box I was just gifted. It's got a SuperMicro p4sct+ with a goofy SATA controller. I've got four hard drives in it, connected to these four SATA connectors (labeled like 1/5, 2/6, 3/7, 4/8). I guess i'm using them in 1,2,3,4 mode. But my gentoo cannot see the drives. lspci sees the controller :00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub (rev 02) :00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge (rev 02) :00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) :00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) :00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) :00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02) :00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) :00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02) :00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) :00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02) :00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller (rev 02) :00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller (rev 02) :00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02) :01:01.0 Ethernet controller: Intel Corporation 82547GI Gigabit Ethernet Controller :02:04.0 RAID bus controller: Marvell Technology Group Ltd. MV88SX5041 4-port SATA I PCI-X Controller :03:09.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) :03:0a.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet Controller It's that dang Marvell thing, I think. When it boots it says Adaptec-HOSTRAID something. There are also two other SATA connectors, seems that they connect to the Intel controller. Shouldn't ata_piix find it? Seems like it. What about a Marvell driver for the four drives, am I hosed? Any ideas? Relevant stuffs from dmesg Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot :00:1f.1 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 hdb: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 [ ... ] libata version 1.11 loaded. ata_piix version 1.03 PCI: Setting latency timer of device :00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xE200 ctl 0xE302 bmdma 0xE600 irq 18 ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE502 bmdma 0xE608 irq 18 ata1: SATA port has no device. scsi0 : ata_piix ata2: SATA port has no device. scsi1 : ata_piix -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: Big data Cluster
I just found this one: http://www.cuddletech.com/articles/iscsi/ So we can make a Linux box an iSCSI target, freaking sweet. Now we can put the clustered initiators in the front with some targets behind. s--- yea! /djb James wrote: David Busby busby at edoceo.com writes: I'm looking for reccomendations for storage clustering. I'd like to network together some Gentoo boxes which internally are SCSI+RAID5 and then be able to store data on these multiple boxes as though they are one big filesystem. Similar to what Isilon does but with Gentoo. I've been reading the web sites about the stuff in /usr/portage/sys-fs/ but I cannot tell which package is going to give me the right stuff. Can anyone point me in the right direction? Well, I've been collection information as I have a 'large' need for remote video surveillance. Here are the general approaches I've seen related to clustering and large data storage needs, from a cost-effective point of view: OPenmosix has some beta offerings that run on 2.6 based servers. From the Linux Journal, May 2005 there is an article Building a Bioinformatics Supercomputering Cluster that may be of interest. Also from the Linux Journal, june 2005 it talks about ATA over Ethernet: http://www.linuxjournal.com/article/8201 I'd be interested in any other clustering or 'high availability' technologies you find for Gentoo. HTH, James -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Can't emerge glibc as it completely fills /var
Zac Medico wrote: Mark Knecht wrote: PORTAGE_TMPDIR determines where portage uses for temporary storage. I set this in make.conf, correct? Seems logical but man emerge and man portage don't seem to mention this variable. That's odd, it's not in portage(5) either. It is documented in make.conf.example though. I thought this was in man 5 make.conf /djb -- gentoo-user@gentoo.org mailing list
[gentoo-user] Big data Cluster
I'm looking for reccomendations for storage clustering. I'd like to network together some Gentoo boxes which internally are SCSI+RAID5 and then be able to store data on these multiple boxes as though they are one big filesystem. Similar to what Isilon does but with Gentoo. I've been reading the web sites about the stuff in /usr/portage/sys-fs/ but I cannot tell which package is going to give me the right stuff. Can anyone point me in the right direction? /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Filesystem access to Gentoo from XP over SSH - suggestions?
I use UltraEdit for this purpose on a daily basis. It is the best editor for all my Windows needs. It supports remote servers through sftp(ssh2). And has support for non *DOS* files. It's only drawback is that its Shareware(Costs $$$) but has a time limited demo. www.ultraedit.com I used to use that one till I discovered jEdit: http://www.jedit.org/. Yes it does SSH2/sftp and it's free, 100's of plugins too. /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] how do I change to /etc/conf.d/hostname
I did this: rm /etc/hostname nano -w /etc/conf.d/hostname [ edit properly ] env-update reboot No problems... /djb George Roberts wrote: Robert Crawford wrote: On Friday 15 July 2005 06:31 pm, George Roberts wrote: I have a day off work and it is too hot to play outside, so I got the bright idea to clean up some minor warnings I have been getting. When I am booting my computer, I get warnings to change from using /etc/hostname to /etc/conf.d/hostname. Also the same with my /etc/domainname. My first though was these topics would be covered in the Gentoo install manual. But after re-reading the manual I find no difference now than when I installed everything a few months ago. Is there something I need to do, or do I live with this for now? IIRC, I just copied my /etc/hostname to /etc/conf.d/hostname. Did that remove the warning for you? After I re-did both files, I am still getting the same warning. -- gentoo-user@gentoo.org mailing list
[gentoo-user] authdaemond duplicates
List, I keep seeing this when emerge runs Regenerating /etc/ld.so.cache... * Caching service dependencies ... * Cannot add provide 'authdaemond', as a service with the same name exists! [ ok ] Regenerating /etc/ld.so.cache... * Caching service dependencies ... * Cannot add provide 'authdaemond', as a service with the same name exists! [ ok ] Auto-cleaning packages ... I've tried adding and removing authdaemond from with rc-update but this still happens Here's my rc-update -s lithium ~ # rc-update -s apache2 | default authdaemond | default bootmisc | boot checkfs | boot checkroot | boot clock | boot consolefont | boot courier-authlib | courier-imapd | default courier-imapd-ssl | courier-pop3d | courier-pop3d-ssl | crypto-loop | domainname | default fcron | default hdparm | hostname | boot keymaps | boot local | default nonetwork localmount | boot modules | boot net.eth0 | default net.lo | boot netmount | default nscd | numlock | openvpn | pg_autovacuum | postfix | default postgresql | default pwcheck | rmnologin | boot rsyncd | saslauthd | default serial | boot spamd | sshd | default syslog-ng | default urandom | boot What's the dilly? /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] 2.4 - 2.6 weirdness
[EMAIL PROTECTED] wrote: Nope, it's definitely udev. I have verified that genkernel does compile the agpgart module and create the /dev/agpgart as a symlink to /dev/misc/agpgart on the real filesystem. But when the udev 'populates' /dev it then mounts over top of the real /dev tree and the new /dev/ and /dev/misc/ have no agpgart present. Even if I compile in the 2.6 system, the links created are short lived as they die and udev rebuilds on next boot. I have no idea what to do next. Can you turn off the /dev tarball feature? From /etc/conf.d/rc # Use this variable to control the /dev management behavior. # auto - let the scripts figure out what's best at boot # devfs - use devfs (requires sys-fs/devfsd) # udev - use udev (requires sys-fs/udev) # static - let the user manage /dev RC_DEVICES=auto /djb Creighton -- gentoo-user@gentoo.org mailing list
[gentoo-user] PHP Odd Error
List, When running php shell scripts I get this at the end of each one No log handling enabled - turning on stderr logging Cannot rename //var/lib/net-snmp/snmpapp.conf to //var/lib/net-snmp/snmpapp.0.conf Cannot unlink //var/lib/net-snmp/snmpapp.conf read_config_store open failure on //var/lib/net-snmp/snmpapp.conf read_config_store open failure on //var/lib/net-snmp/snmpapp.conf read_config_store open failure on //var/lib/net-snmp/snmpapp.conf But it only happens when I run php as a user, not when I run as root. My emerge world is up to date, should a normal user need to write there or what other thing do I switch to turn this off. It just started when I re-emerged the latest PHP cause revdep-rebuild said I should and it was failing while looking for libhistory or something (don't remember). So should I just change dir perms or what? /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Problem emerging man-1.6
I'm was seeing this too, from a emerge --sync I did yesterday. I tried emerge --sync just now and then emerge man and everything went OK, still version 1.6. /djb Christian Herzyk wrote: Hello, emerge -u world wants to upgrade man to version 1.6. I get the following errors: Created Makefile and conf_script. Now do make and make install. cd src; ../conf_script Makefile cd man2html; ../conf_script Makefile Creating Makefile from Makefile.in Creating Makefile from Makefile.in cd man; ../conf_script Makefile cd gencat; make Creating Makefile from Makefile.in make[1]: Entering directory `/data/portage/tmp/portage/man-1.6/work/man-1.6/genc at' i686-pc-linux-gnu-gcc -march=athlon-xp -mcpu=athlon-xp -O2 -fomit-frame-pointer -pipe -c -o gencat.o gencat.c cd msgs; ../conf_script Makefile Creating Makefile from Makefile.in cd src; make make[1]: Entering directory `/data/portage/tmp/portage/man-1.6/work/man-1.6/src' gcc -o makemsg makemsg.c i686-pc-linux-gnu-gcc -march=athlon-xp -mcpu=athlon-xp -O2 -fomit-frame-pointer -pipe -c -o genlib.o genlib.c i686-pc-linux-gnu-gcc -c -Wall -Wstrict-prototypes -Wmissing-prototypes -march=a thlon-xp -mcpu=athlon-xp -O2 -fomit-frame-pointer -pipe -I. -DSTDC_HEADERS -DPOS IX -DDO_COMPRESS manfile.c In file included from manfile.c:15: gripes.h:1:23: gripedefs.h: No such file or directory manfile.c: In function `glob_for_file_ext_glob': manfile.c:87: error: `CALLTRACE3' undeclared (first use in this function) manfile.c:87: error: (Each undeclared identifier is reported only once manfile.c:87: error: for each function it appears in.) manfile.c:115: error: `ABOUT_TO_GLOB' undeclared (first use in this function) manfile.c: In function `glob_for_file': manfile.c:152: error: `CALLTRACE2' undeclared (first use in this function) manfile.c:183: error: `NO_MATCH' undeclared (first use in this function) manfile.c:187: error: `GLOB_FOR_FILE' undeclared (first use in this function) manfile.c: In function `manfile_from_sec_and_dir': manfile.c:209: error: `CALLTRACE1' undeclared (first use in this function) manfile.c:230: error: `FOUND_FILE' undeclared (first use in this function) make[1]: *** [manfile.o] Error 1 make[1]: Leaving directory `/data/portage/tmp/portage/man-1.6/work/man-1.6/src' make: *** [source] Error 2 make: *** Waiting for unfinished jobs i686-pc-linux-gnu-gcc -Wl,-z,now -o gencat gencat.o genlib.o make[1]: Leaving directory `/data/portage/tmp/portage/man-1.6/work/man-1.6/genca t' !!! ERROR: sys-apps/man-1.6 failed. !!! Function src_compile, Line 57, Exitcode 2 !!! emake failed !!! If you need support, post the topmost build error, NOT this status message. Any ideas what could be the problem? Thanks Christian -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Disk Backup From One Machine To Another
Timo Boettcher wrote: Hi David, I would be very interested in this. Timo Timo (and everyone else) I've posted that script so you can use it, added some documentation. It's available here: http://www.edoceo.com/creo/remote-host-secure-backup.php /djb -- gentoo-user@gentoo.org mailing list
[gentoo-user] Failed Disk Recovery
List, I've got a HDD that's failed, seems to have lost partition table. When I say sfdisk -l or -d it can't read and I see IO errors in dmesg output, can't read sector XX. I can't get dd to dump from that drive to file on a working drive either. It's an NTFS drive that Windows can't see at all. What other options do I have to recover data? ntfsprogs testdisk haven't been helpful either. Anyone have ideas? /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Disk Backup From One Machine To Another
* Raphael Melo de Oliveira Bastos Sales [EMAIL PROTECTED], Friday, June 24, 2005, 8:27:02 PM: I have one machine (Machine 1) that I need backup its files periodically. I also have another machine (Machine 2) that will hold the backup. Machine 2 can see (make requests to) Machine 1, but the opposite isn't true. The network is covered by a firewall, so I don need a paranoid solution. I was thinking about doing the following: I use a shell script that connects to my machines via ssh and performs commands to: 1. Backup Postgres with pg_dump 2. turn last weeks log files into tgz 3. rsync my /etc, /opt/edoceo (that's where I put my stuff) and other dirs I made it so that there is a config file that describes the backup as: host, db (yes/no), dir list. The machines are firewalled and the ssh is only allowed when signed by my trusted CA (me as well) so I feel pretty secure about it. Rsync allows me to throttle the connection to so I don't chew all my bandwidth on the backups. Let me know if you want a copy and I'll pull all my specifc stuffs out and post a copy. Cheers. /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] HTTPS/CA
John Ziniti wrote: Iain Buchanan wrote: On Mon, 2005-06-20 at 16:54 -0700, David Busby wrote: The hacker still would not be able to present a valid certificate, though, right? This depends on what the OP meant when he said If the client is not signed I generate and securely transmit a cert to the client and then open the network to their IP. Do you mean that you do this in an automated way (blech), or is it done manually in some offline manner (better)? Yes if the client isn't signed by my one and only one trusted CA (which is me) I will give them the cert in a manual/offline way, even if it is inconvienient. 2. Break into a box you trust which may not be so locked down as yours is... This is the biggest hole that I see. Yea, I thought so too. JZ Excellent feedback, thank you. /djb -- gentoo-user@gentoo.org mailing list
[gentoo-user] Cannot find iceauth in path
List, Gaaa! I upgraded and now my kde don't start, says it 'Could not find 'iceauth' in path. Further down there is a message that xmessage: command not found. I thought iceauth was in dcopc so I added that package but no help, where do I get iceauth from? /djb -- gentoo-user@gentoo.org mailing list
[gentoo-user] HTTPS/CA
Gurus, In this hypothetical situation how would someone break in or view the data transmitted? Hardend Gentoo/Linux/Apache system with only port 443 open in a secure facility (please assume that hardend means everything you, dear reader, would do to secure a box). Now this Apache server is configured only to accept connections from clients who present a certificate signed by the CA who signed the servers cert. If the client is not signed I generate and securely transmit a cert to the client and then open the network to their IP. Since traffic is limited to IPs that I trust and everyone must have a certificate signed by my CA how can jerks break into my box? Seems to be to be pretty solid, so I must be missing something. /djb -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Cannot find iceauth in path
Zac Medico wrote: xorg-x11 Zac I re-emerged xorg-x11 but did not get iceauth. I googled more but am still lost. I have USE=x86 X apache2 bitmap-fonts kde memlimit minimal mmx opengl pam pcre perl php \ postgres readline sse ssl xv zlib userlang_GNU kernel_linux elibc_glibc -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Cannot find iceauth in path
David Busby wrote: Forget Me: -minimal is the fix -- gentoo-user@gentoo.org mailing list
