> I hope this is not too vague, so please bare with me.
> >
> > Thanks in advance for any suggestions.
>
> I'd suggest to try qemu kvm + libvirt
For a graphical GUI frontend for this you can use app-emulation/virt-manager.
regards
/22 9:58 AM, John Covici wrote:
OK, more progress and a few more questions.
Yay progress!
In the virt-manager, I could not figure out how to add disk storage
to the vm. I have a partition I can use for the disk storage --
is this different from the virtual machine image?
It depends.™
KVM
work]
DNS=...
Address=...
Gateway=...
(this will give the bridge interface an IP/etc - most likely you'll
just set this file up the way you'd otherwise be setting up your
physical network. This can use dhcp.)
Then you'll tell virt-manager to use the brkvm bridge for all your VMs
that you want bridge
On Thu, 07 Jul 2011 14:24:48 -0400
Albert Hopkins mar...@letterboxes.org wrote:
On Thursday, July 7 at 19:15 (+0100), john said:
I am trying to start virt-manager but when I start the daemon
/etc/init.d/libvirtd i get
* Starting libvirtd ...
/usr/sbin/libvirtd: error
as modules
iproute2 has now been installed but makes no odds. Not sure about
brctl as I can't find this?
Have started libvirtd and get the following
when trying to start virt-manager
20:28:05.083: 5216: info :
libvirt version: 0.9.1 20:28:05.083: 5216: error :
virCommandWait:1281
ki.gentoo.org/wiki/Tor
It appears to me that, with a grsecurity-hardened kernel-base Gentoo
machine, using TBB is next to impossible (tried it, doesn't work the
simple user way _at all_). Neither did I have much luck with Whonix, since
porting Whonix to Gentoo appears dead, to say just so much a
zation
system made useful by a hypervisor, interface, and device emulation
components comprising a full virtualization system as defined by
nobody.[1]
Admittedly I referred to only QEMU above.
> I do suggest using libvirt, and found that
> app-emulation/virt-manager gives you a lot of the benefi
find this?
Have started libvirtd and get the following
when trying to start virt-manager
20:28:05.083: 5216: info :
libvirt version: 0.9.1 20:28:05.083: 5216: error : virCommandWait:1281 :
internal error Child process (/sbin/iptables --table mangle --insert
POSTROUTING --out-interface
. It works really well for servers/other
always on systems that run in the background. virt-manager can handle
everything for you, you just have to know the name of the bridge to
which you want to the VM to join.
There's no requirement that they be on separate layer 2 segments if
you want them
with several
VMs, also using bridged TAP adapters. It works really well for
servers/other always on systems that run in the background.
virt-manager can handle everything for you, you just have to know the
name of the bridge to which you want to the VM to join.
There's no requirement
these things while browsing through the 'details'
list in virt-manager. Mostly what I'm curious about is which kernel
configuration options they correspond to when setting up kernels in the
guest. I'll post a link to the kernel configuration options I've found
(so far) when I get home tonight.
Do you also
,
I'm using qemu-kvm for hoisting a Windows 7, but always typing the
long commandline is anoying, so I wrote a little script to start the
VM. I recently switched to libvirt and virt-manager, which do the
commandline work for me, and creatting new VMs or starting them is
quiet easy. This system also
On Tue, Dec 30, 2014 at 2:52 PM, Mick michaelkintz...@gmail.com wrote:
For years now I have been running VirtualBox for testing purposes.
I used to run vbox, but ran into some issues along the way and
switched to KVM, with virt-manager as a front-end. It is a bit more
complicated to get
On Tuesday 30 Dec 2014 22:01:00 Rich Freeman wrote:
On Tue, Dec 30, 2014 at 2:52 PM, Mick michaelkintz...@gmail.com wrote:
For years now I have been running VirtualBox for testing purposes.
I used to run vbox, but ran into some issues along the way and
switched to KVM, with virt-manager
improved in some ways.
> >
> > --
> > Miroslav Rovis
> > Zagreb, Croatia
> > http://www.CroatiaFidelis.hr
>
>
> Hi Miroslav,
>
> You have checked that yourself? ;)
No, I didn't, no time, I have other issues that occuply all my time, see
the concurre
her case it helped here to recompile complete gentoo server.
>>
>> Do you use stable atoms or unstable?
>
> stable
>
> libvirt-4.3.0 yesterday, installed that and re-compiled qemu as well
>
> I also rebuilt spice.
>
> -
>
> As far as I see the upstream
ents I
> find show long commandline options to just start the VM.
> I have not found one where I can provide all the config in a single file and
> use that. Allowing me to duplicate settings by simply copying the file and
> changing a few lines.
>
> KVM/Qemu seems to be written t
he host.
> > >
> > > I have downloaded xen to take a look at it as well.
> > >
> > > I hope this is not too vague, so please bare with me.
> > >
> > > Thanks in advance for any suggestions.
> >
> > I'd suggest to try qemu kvm + libvirt
system. I don't remember exactly what I had to do to
> resolve it. I do know that it was less than five minutes of
> searching the web to find the answer, cussing at what needed to
> be done, and doing it. That system has been running perfectly
> fine for many years.
>
OK, more pr
and this myth really needs to be debunked. Here's
why:
I agree. I'm still using xmms so I can compare. Here are few lines
from top (displaying a Mem window - 'Shift+g 3'). Both players were
playing same mp3 file.
PID %MEM VIRT SWAP RES CODE DATA SHR nFLT nDRT S PR %CPU
COMMAND 8810 10.9 172m
yet fully migrated my own VMs to ...
KVM:
It feels (and is) faster. Less overhead.
I really appreciate the fact that it is in the kernel, you just enable
it once and it is there ...
Very little overhead, VMs feel fast and snappy.
For gui I use virt-manager on top of libvirt, nice feature
solution you should also be looking at stuff like VMWare (I don't know
how well the FOSS solutions do as far as enterprise-y features go).
In any case, while not quite as simple as Virtualbox I've found that
virt-manager is very easy to use once you've gotten networking set up
(which isn't too hard to do
Live-x86_64-25_Beta-1.1.iso -boot
> once=d,menu=off -vga virtio -display gtk,gl=on
>
> but getting the following error when machine gets to display manager
>
> (qemu-system-x86_64:3192):
> Gdk-WARNING **:gdk_gl_context_set_required_version - GL context
> versions le
e settings by simply copying the file and
> > changing a few lines.
> >
> > KVM/Qemu seems to be written to be used together with virt-manager which,
> > for me, lacks important features to make it usable in production.
> >
> > --
> > Joost
>
> Until a
e.
> > > >
> > > > Thanks in advance for any suggestions.
> > >
> > > I'd suggest to try qemu kvm + libvirt
> >
> > For a graphical GUI frontend for this you can use
> > app-emulation/virt-manager.
>
> ++
>
> This is jus
1
virtualbox-modules).
Some more general suggestions:
1. I use Virtualbox on Windows as there aren't a lot of good free
alternatives that I'm aware of. I stopped using it on Linux ages ago
because KVM/libvirt are generally much better these days.
app-emulation/virt-manager is a nice front-end
. It's firefox:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
14072 iain 20 0 1369m 897m 15m S 3 29.5 113:14.91 firefox
I think that's 1.3Gb + 900Mb... sounds like a memory leak to me.
Anyone else run firefox for 113+ hours? I'm using 3.6.9-r1.
1.3G
;
(~)1.1.0{tbz2} - 1.1.0-r1): Utility to change the OpenCL
implementation being used
[] == app-admin/haskell-updater (1.1.0.0 - 1.2.0.5): Rebuild
Haskell dependencies in Gentoo
[] == app-doc/doxygen (1.7.3 - 1.7.6.1!m): Documentation system
for most programming languages
[] == app-emulation/virt
that
virt-manager is very easy to use once you've gotten networking set up
(which isn't too hard to do under either openrc or networkd). I tend
to use the GUI for setting things up and for graphical guests, and I
used to create init.d scripts / units for the stuff that I
subsequently moved
_64 -enable-kvm -m 4096 -smp 8 -localtime
>> -cdrom Fedora-Workstation-Live-x86_64-25_Beta-1.1.iso -boot
>> once=d,menu=off -vga virtio -display gtk,gl=on
>>
>> but getting the following error when machine gets to display manager
>>
>> (qemu-system-x86_64:3192):
&
with virtualization can help us improve our libvirtd,
virt-manager
and a host of other pages.
There are no topics off limit for this and we really would like more people to
join in.
- Patches for packages failing with -fno-common
Given the addition of GCC-10 and LLVM/Clang-10 to our repositories
Virtualbox, you will notice this issue. When only snapshotting
the disk, your snapshot is basically the state of when you literally pulled
the plug of your VM if you want to restore back to this.
For KVM, I have found a few hints that this was planned. But I have not found
anything about this. Virt
einstall it.
This brings another problem I have with KVM/QEMU: all howtos and documents I
find show long commandline options to just start the VM.
I have not found one where I can provide all the config in a single file and
use that. Allowing me to duplicate settings by simply copying the file and
changing a few lines.
KVM/Qemu seems to be written to be used together with virt-manager which, for
me, lacks important features to make it usable in production.
--
Joost
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
if you have your CFLAGS tuned to a specific processor that your
hypervisor does not support. But I use generic CFLAGS so I have no
problem using binpkgs.
Oh, I use kvm/virt-manager and use virtio for disks and network devices.
I tried to configure the VM kernel so that it will support other
formats
not support. But I use generic CFLAGS so I have no
problem using binpkgs.
Oh, I use kvm/virt-manager and use virtio for disks and network devices.
I tried to configure the VM kernel so that it will support other
formats. I am curious as to whether or not the appliances will work
r cryptro-verifiable-way signed). So HTTPS alone does not
do it.
> Well, maybe someone will noticed this message. Or not.
>
> R0b0t1.
>
I hope too.
Because it's depressing how large swathes of FOSS are getting under
control of big business and to some extent, very minor here, but not
negli
*
> WARN: postinst
> This driver requires KMS support in your kernel
> Device Drivers --->
> Graphics support --->
> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
> <*> Intel 830M, 845G, 852GM, 855GM, 865G (i915 driver) --->
--->
Graphics support --->
Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
<*> Intel 830M, 845G, 852GM, 855GM, 865G (i915 driver) --->
i915 driver
[*] Enable modesetting o
f Gentoo and manage everything from the CLI.
KVM runs inside a Linux kernel and this instance automatically is the host. (I
don't know enough to properly compare the 2, there are plenty of resources
about comparisons online, most are biased to one or the other)
Both Xen and KVM can be managed with ot
roduct. The VMWare desktop product has the same problems as VirtualBox.
As for which free one is best, I am reluctant to answer specifically as both
Xen and KVM are good.
Personally, I use Xen. I have been using it since one of the 2.x versions and
KVM didn't exist back then.
Xen has the hyperv
otice this issue. When only snapshotting
> the disk, your snapshot is basically the state of when you literally pulled
> the plug of your VM if you want to restore back to this.
>
> For KVM, I have found a few hints that this was planned. But I have not
> found anything about this.
lab-system, I was also missing the ability to save the full
>state of a
>> VM for a snapshot. All the howto's and guides I can find online only
>talk
>> about making a snapshot of the disks. Not of the memory as well.
>Especially
>> when used to Virtualbox, you will notic
ted to impose dbus on Gentoo users,
and if anybody knows that GTK3 might ever in the future drop dependency
to dbus, pls. do tell us!
Otherwise, I was able to follow my tip "GUI-less (non-dbus) virt-manager
(to run Tails in Gentoo)" and the attachments thereof to install all
correctly in my Ai
word for pages.
But it does not matter much now because I currently do not
use Chromium any more because it compiles more than 26 hours
on my computer.
>> I thought that that was because of the gnome-keyring,
>> consolekit or policykit packages but without any proof.
>
> From what I underst
USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND
1 root 16 0 1516 540 472 S0 0.1 0:00.63 init
2 root RT 0 000 S0 0.0 0:00.00 migration/0
3 root 34 19 000 S0 0.0 0:00.00 ksoftirqd/0
4 root RT 0
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hello, every gentooers!
I am running Gentoo with the latest Virt-Manager/Libvirtd/KVM windows
2003 as Guest OS. Because the Broadcom of under the host environment
works terrible of the performance and stability, so I want to pass it to
my Guest
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hello, every gentooers!
I am running Gentoo with the latest Virt-Manager/Libvirtd/KVM windows
2003 as Guest OS. Because the Broadcom of under the host environment
works terrible of the performance and stability, so I want to pass it to
my Guest
101 - 147 of 147 matches
Mail list logo