Hi,
I am doing a fresh new gentoo x64 install. After I chroot to my new
gentoo system and do emerge-webrsync, I got the following error
message:
no properly formatted md5 line
I check the mirror sites and they all have the .md5sum file. I
remember I met this kind of problem before, and I just
portage to update the portage separately, then i do
emerge-webrsync, then i got everything works ;)
On Tue, Aug 25, 2009 at 8:58 PM, Mickmichaelkintz...@gmail.com wrote:
2009/8/25 Xi Shen davidshe...@googlemail.com:
Hi,
I am doing a fresh new gentoo x64 install. After I chroot to my new
Hi,
i am new to awesome, after i have successfully emerged
awesome-3.2.1-r3, and started the X, i cannot find the default rc.lua.
i tried right-clicking on the blank area and choose 'awesome'-'edit
config', but it gives me a file with nothing; actually, the file which
the editor trying to open
thanks you guys ;)
to Gladly:
what is the 'qlist' tool? a file index tool?
On Thu, Aug 27, 2009 at 1:24 AM, Marc Jolietmar...@gmx.de wrote:
Am Wed, 26 Aug 2009 18:35:28 +0800
schrieb Xi Shen davidshe...@googlemail.com:
Hi,
i am new to awesome, after i have successfully emerged
awesome
Hi,
Has anybody successfully setup scim on awesome? After I emerged the
scim ebuilds, and setup the system as instructed by
http://en.gentoo-wiki.com/wiki/SCIM, the scim still cannot work on my
awesome 3. I started my scim by 'scim -d', and it claims to have
loaded successfully, and I can see a
Hi,
I have just emerged moc, and was trying to play a mp3 music which
works fine on windows. But on my gentoo, it gives me some strange
sound. It looks like moc is not using the correct codec. How can I fix
this?
--
Best Regards,
David Shen
http://twitter.com/davidshen84
Hi,
I need zh_CN on my system. But when I enable it in make.conf, I have
the Chinese version of man-page installed. I want to use the English
version. Is there a way to disable the LINGUAGS for a specific
package?
--
Best Regards,
David Shen
http://twitter.com/davidshen84
and I also noticed that it plays too fast. A 3 mins song was
played in 10 sec, or so
On Mon, Aug 31, 2009 at 8:58 PM, Xi Shendavidshe...@googlemail.com wrote:
Hi,
I have just emerged moc, and was trying to play a mp3 music which
works fine on windows. But on my gentoo, it gives me some
I d/l it by BT, so I do not think it is DRM'd. And I can enjoy that
mp3 file at windows.
On Mon, Aug 31, 2009 at 10:37 PM,
Strollerstrol...@stellar.eclipse.co.uk wrote:
On 31 Aug 2009, at 13:58, Xi Shen wrote:
...
I have just emerged moc, and was trying to play a mp3 music which
works fine
thanks, i got it. ;)
On Mon, Aug 31, 2009 at 9:31 PM, Frank Steinmetzgerwar...@gmx.de wrote:
Am Montag, 31. August 2009 schrieb Xi Shen:
Hi,
I need zh_CN on my system. But when I enable it in make.conf, I have
the Chinese version of man-page installed. I want to use the English
version
yes, the problem exists to all mp3 files.
i will try your USE flags, thanks.
On Tue, Sep 1, 2009 at 1:38 AM, Nikos Chantziarasrea...@arcor.de wrote:
On 08/31/2009 03:58 PM, Xi Shen wrote:
I have just emerged moc, and was trying to play a mp3 music which
works fine on windows. But on my
I think anything I got by BT is copy free, isn't it?
anyway, i have copied them a lot to my friend.
On Tue, Sep 1, 2009 at 1:40 AM, Mickmichaelkintz...@gmail.com wrote:
On Monday 31 August 2009, Xi Shen wrote:
I d/l it by BT, so I do not think it is DRM'd. And I can enjoy that
mp3 file
Hi,
every time i reboot the system, the ~/.bashrc will not be
read/executed automatically. i have give it x attribute. also i have
checked the /etc/bash/bashrc file, and i did not find and logic about
reading/executing the ~/.bashrc file. is there anything wrong with my
system?
--
Best
Hi,
as you emerge, the /usr/portage/distfiles get stuffed with old
packaged. even through it is safe to delete them all, and d/l again
when needed, but i just want to remove only the old version. is there
any way, or any tool to help with this task?
--
Best Regards,
David Shen
thanks you all. will try the eclean out ;)
On Tue, Sep 1, 2009 at 11:18 PM, Frank Steinmetzgerwar...@gmx.de wrote:
Am Dienstag, 1. September 2009 schrieb Xi Shen:
Hi,
as you emerge, the /usr/portage/distfiles get stuffed with old
packaged. even through it is safe to delete them all, and d/l
where is the bash_profile? i cannot find it on my gentoo.
On Wed, Sep 2, 2009 at 5:15 AM, Alan McKinnonalan.mckin...@gmail.com wrote:
On Tuesday 01 September 2009 14:24:10 Renat Golubchyk wrote:
Hi!
On Tue, 1 Sep 2009 20:09:12 +0800
Xi Shen davidshe...@googlemail.com wrote:
every time i
thanks guy, i got it ;)
On Wed, Sep 2, 2009 at 8:15 PM, Alan McKinnonalan.mckin...@gmail.com wrote:
On Wednesday 02 September 2009 14:02:26 Dale wrote:
Xi Shen wrote:
where is the bash_profile? i cannot find it on my gentoo.
r...@smoker / # locate bash_profile
/etc/skel/.bash_profile
Hi,
i am using gentoo amd64, awesome 3. after i started X, i use rdesktop
myserver, to connect to my windows xp machine, but the command just
hangs. nothing happens.
have i missed anything?
--
Best Regards,
David Shen
http://twitter.com/davidshen84
i am using vmware-server 2.0, and it works fine. i think you should
use 2.0, too.
and i think you should post the log, instead of the error message, so
maybe some one can help you.
On Sat, Sep 5, 2009 at 7:59 AM, Nick Khamissym...@gmail.com wrote:
Hey Everyone,
I emerged vmware-modules with
xen requires your cpu support hardware virtulization. and i only heard
it support windows, but i do not know how well it supports.
if you like vmware, why do not try vmware-server 2.0. it is in the
overlay, and it works very well for me.
On Sat, Sep 5, 2009 at 8:50 AM, Volker Armin
wrote:
On Saturday 05 September 2009 07:58:22 Xi Shen wrote:
xen requires your cpu support hardware virtulization. and i only heard
it support windows, but i do not know how well it supports.
This is utterly and completely wrong on so many levels it doesn't deserve an
explanation.
Just
Hi,
i have vmware-server 2.0 running on gentoo amd64, the guest os is
windows xp. on another gentoo amd64 machine, i emerged
vmware-server-console, and tried to connect to the guest os, but
without luck. a vmware-server-console window popup, but with nothing
in it.
i am using awesome 3.
--
btw, the 'vmware-server-console' program requires a -P (port)
argument, but i do not understand what kind of port number should i
give. i remember while installing the server, a port 902 is opened by
default for accessing the guest os. is it the port that the program
expected? anyway, i tried with
Hi,
when i am trying to d/l the dmg2img ebuild, i found that the filename
trying to d/l is 'download?dmg2img-1.6.tar.gz'. since th '?' mark has
special mean in http/ftp, i cannot d/l the file. i have check many
mirrors around the world, the results are the same. i think there's
some wrong on the
yeah, i can connect to the web; but if i cannot connect to the vms
through the console, i cannot see how they boot.
On Mon, Sep 7, 2009 at 9:20 PM, David Sniderdsni...@thesniderpad.com wrote:
On Sep 7, 2009, at 5:28 AM, Xi Shen wrote:
give. i remember while installing the server, a port 902
i was just thinking that if i cannot get the console work, i will turn
to use vnc.
thanks for your tips ;)
On Tue, Sep 8, 2009 at 12:36 AM, David Sniderdsni...@thesniderpad.com wrote:
On Sep 7, 2009, at 9:28 AM, Alan McKinnon wrote:
VMWare Server 2 did away with the console.
Oh no. Please
...@math.princeton.edu wrote:
On Mon, Sep 07, 2009 at 08:19:09PM +0800, Penguin Lover Xi Shen squawked:
when i am trying to d/l the dmg2img ebuild, i found that the filename
trying to d/l is 'download?dmg2img-1.6.tar.gz'. since th '?' mark has
special mean in http/ftp, i cannot d/l the file
Hi,
i installed my gentoo x64 on my usb HD, because i have to use windows
for my work. but the problem is that if i boot from the usb HD, it
cannot find the HD on my laptop. the gentoo 2008 installation cd works
very well, so i think i must have missed some drivers in the kernel or
module. i have
of course i am using genkernel. i do not have access to my linux box
now. i will post the output later.
On Fri, Sep 11, 2009 at 8:39 AM, Jacob Todd jaketodd...@gmail.com wrote:
On Fri, Sep 11, 2009 at 11:57:51AM +0800, Xi Shen wrote:
Hi,
i installed my gentoo x64 on my usb HD, because i have
hi,
i have attached my dmesg output, please help me review.
i have tried the kmuto.jp site, and i think i have all the modules
installed and loaded, but i still cannot see my HD on my laptop
On Fri, Sep 11, 2009 at 1:42 PM, Xi Shen davidshe...@googlemail.com wrote:
of course i am using
hi,
my laptop is thinkpad t61, and wireless card is intel pro/wireless
3945abg (according to the lspci output). i have configured my kernel
as instructed by the handbook, and after compiling and reboot, i can
see my wlan interface by iwconfig -a, and i modprobe iwl3945. but when
i try iwspy
i solved it. thanks ;)
On Fri, Sep 11, 2009 at 8:42 PM, Albert Hopkins mar...@letterboxes.org wrote:
On Fri, 2009-09-11 at 20:20 +0800, Xi Shen wrote:
my laptop is thinkpad t61, and wireless card is intel pro/wireless
3945abg (according to the lspci output). i have configured my kernel
ok, i have find all my HD now. bug```i just noticed that i cannot find
my cdrom. it is a dvd+rw
On Fri, Sep 11, 2009 at 6:49 PM, Xi Shen davidshe...@googlemail.com wrote:
hi,
i have attached my dmesg output, please help me review.
i have tried the kmuto.jp site, and i think i have all
Hi,
i want to use discc to speed my emerge compilation. but the problem is
that i have 32bit and 64bit mixed environment, and some of the cpus do
not support amd64 mode. so i just wonder if i could do cross compile.
has anyone done this before? any suggestions/comments are welcomed.
--
Best
hi,
this is the my 1st time working with distcc. after i have emerged and
configured the system (include the make.conf), i tried to emerge kde,
and use distmon-text to see what would happen. i lost the output of
the distmon-text, but the output looks something like this:
somefile.name
thanks, i got it working now.
On Wed, Sep 30, 2009 at 1:08 AM, Al a...@ngale.adsl24.co.uk wrote:
Xi Shen wrote:
hi,
this is the my 1st time working with distcc. after i have emerged and
configured the system (include the make.conf), i tried to emerge kde,
and use distmon-text to see what
hi,
i am working on gentoo 2008 amd64, i set up my system to use distcc. i
enabled the distccd to log debug information, and monitored the
compiling process. and i have emerged some softwares with distcc. but
for some softwares, distcc will not compile them correctly. and i
always got compile
hi,
when i use emerge, there are too many packaged that they cannot
displayed in one screen. but i cannot use less to separate it into
pages. why? please help ;)
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
http://meme.yahoo.com/davidshen84/
i think screen or Peter's way saves me.
thanks guys ;)
On Fri, Oct 16, 2009 at 10:01 PM, Peter Weilbacher
newss...@weilbacher.org wrote:
On 16.10.2009 14:05, Xi Shen wrote:
when i use emerge, there are too many packaged that they cannot
displayed in one screen. but i cannot use less
hi,
my gentoo x64 kernel is compiled by genkernel. after i have installed
the native tool, i am asked to run the vmware-config-toos.pl. but it
says none of the pre-build vmmemctl modules is suitable for my running
kernel, and it tries to rebuild it. but it looks like it cannot find
my kernel
well, currently i am using the open-vm-tool, which is the open source
version. but i want to know if they are the same in function. can
someone tell me?
thanks.
On Thu, Oct 22, 2009 at 6:32 AM, Keith Dart ke...@dartworks.biz wrote:
=== On Wed, 10/21, Nikos Chantziaras wrote: ===
Isn't that
hi,
i have just emerged kde 4.3. when i ran startx, a message Unknown
Host is displayed. Clearly, I missed some configuration. But what?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
http://meme.yahoo.com/davidshen84/
hi,
the error message in the build.log is:
{standard input}: Assembler messages:
{standard input}:29083: Warning: end of file not at end of a line;
newline inserted
{standard input}:30868: Error: bad register name `%'
xgcc: Internal error: Killed (program cc1)
i am not using ccache/distcc. very
hi,
i am using gentoo x64, kde 4.3.2, and konqueror 4.3.2. i have emerged
adobe-flash, but i still cannot see flash on pages, and it always
navigates me the adobe.com to install the flash plug-in. how can i fix
this?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
hi,
where is the setting dialog? i only find the setting menu, in which i
found the extension dialog. but it doe not have flash listed. what
should i do now?
On Fri, Oct 23, 2009 at 6:56 PM, Alan McKinnon alan.mckin...@gmail.com wrote:
On Friday 23 October 2009 12:51:16 Xi Shen wrote:
hi,
i
hi,
i am using gentoo x64, just have ffmpeg emerged, and successfully
emerged -u world. but when i ran ffmpeg -formats, i got a error
message saying that the libfaad.so.1 cannot be found. i check my
system, and i only have faad2 emerged. actually, the whole portage
tree does not have something
great, revdep-rebuild saved me. thanks ;)
On Sat, Oct 24, 2009 at 1:28 PM, Dale rdalek1...@gmail.com wrote:
Xi Shen wrote:
hi,
i am using gentoo x64, just have ffmpeg emerged, and successfully
emerged -u world. but when i ran ffmpeg -formats, i got a error
message saying
hi,
i am using gentoo x64. i want to try xen, but my file system is ext4,
and i cannot fine ext4 support while compiling xen-source. have i
missed something, or ext4 is not supported by xen for now? when will
it be available?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
hi,
i am using gentoo x64. i want to setup a tor bridge relay. but i
cannot get it to work. in the log file, i can only see notices like
this:
[notice] No current certificate known for authority moria1; launching request.
Nov 02 22:21:32.598 [notice] No current certificate known for
authority
Hi,
when i start my system from gentoo live dvd, all my hardware works
fine. but if i want to have a small system, so i removed many drivers
when i am compiling my own system. the result is some times, i do not
know which driver should i choose for my hardware, and my hardware
cannot use when i
hi,
i am using genkernel to compile my kernel. i have CONFIG_IDE set to
no, but after i boot my system, in the /proc/config.gz file, the
CONFIG_IDE is still set to y.
i have checked the file /etc/kernels and /usr/src/linux/.config, and
the CONFIG_IDE is set to no.
it looks like the genkernel is
hi,
when i boot my system, at the step Wiping /tmp, it pops up an error
message saying that the find command do not support the '-uid' option.
in the error message, i also see the busybox mark. it looks like it
used the wrong find command.
i build the kernel my self, and have a initramfs file.
hi,
i have 3 machines in my LAN, all of them have distcc installed and are
configured to use all 3 machines to compile. on one machine i started
emerging a very large ebuild, but only the local machine on of the 2
remote machine is compiling, while the other one is idle. if i change
the address
problem.
On Fri, Dec 4, 2009 at 11:44 PM, Willie Wong ww...@math.princeton.edu wrote:
On Fri, Dec 04, 2009 at 08:11:21PM +0800, Penguin Lover Xi Shen squawked:
when i boot my system, at the step Wiping /tmp, it pops up an error
message saying that the find command do not support the '-uid' option
initramfs file.
On Sat, Dec 5, 2009 at 4:42 AM, Alan McKinnon alan.mckin...@gmail.com wrote:
On Friday 04 December 2009 17:25:21 Alex Schuster wrote:
Xi Shen writes:
when i boot my system, at the step Wiping /tmp, it pops up an error
message saying that the find command do not support the '-uid
yes i use / on LVM.
i just cannot understand why the busybox in the initramfs that
genkernel generates works fine, while mine reports error.
On Mon, Dec 7, 2009 at 2:27 PM, Alan McKinnon alan.mckin...@gmail.com wrote:
On Monday 07 December 2009 03:00:29 Xi Shen wrote:
yes, i installed busybox
at 11:38 PM, Alex Schuster wo...@wonkology.org wrote:
Xi Shen writes:
yes i use / on LVM.
Me too.
i just cannot understand why the busybox in the initramfs that
genkernel generates works fine, while mine reports error.
And I do not understand why the wiping tmp stuff actually happens while
hi,
my laptop is thinkpad t61. according to the output of lspci -k
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 03)
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
the driver is already loaded. and i have use alsaconf, and
thanks you all. i have tried to press the mute button, the volume up
button, adjust the volume in mplayer, etc. but still got nothing. and
my kernel have the intel codec compiled at modules.
anyway, i will retry again...
On Wed, Dec 16, 2009 at 6:51 AM, Dale rdalek1...@gmail.com wrote:
Bruce
hi,
i installed my gentoo on a usb HD disk, and i have compiled scsi, usb,
ata drivers into the kernel. but when boot, the system still cannot
find my usb hd, but it did find my hd on my laptop. what i missed?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
sorry, could you be more specific? i cannot follow you ;)
On Thu, Dec 17, 2009 at 4:01 PM, Alan McKinnon alan.mckin...@gmail.com wrote:
On Thursday 17 December 2009 09:47:14 Xi Shen wrote:
hi,
i installed my gentoo on a usb HD disk, and i have compiled scsi, usb,
ata drivers into the kernel
On Thu, Dec 17, 2009 at 10:36 PM, Steffen Loos fe...@gmx.net wrote:
Xi Shen schrieb:
sorry, could you be more specific? i cannot follow you ;)
On Thu, Dec 17, 2009 at 4:01 PM, Alan McKinnon alan.mckin...@gmail.com
wrote:
On Thursday 17 December 2009 09:47:14 Xi Shen wrote:
hi,
i
On Thu, Dec 17, 2009 at 10:22 PM, Willie Wong ww...@math.princeton.edu wrote:
On Thu, Dec 17, 2009 at 03:47:14PM +0800, Penguin Lover Xi Shen squawked:
i installed my gentoo on a usb HD disk, and i have compiled scsi, usb,
ata drivers into the kernel. but when boot, the system still cannot
hi,
i have just emerged chromium on my gentoo amd64. the chromium version
is 4.0.251.0. but the 'Sync my bookmarks' menu item is disabled. how
can i enable it?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
http://meme.yahoo.com/davidshen84/
hi,
my X it self works well with chinese. but the dolphin does not work
well with chinese. if any file contains chinese (or any non-ascii)
characters, it simply will not be displayed in the list. how can i fix
this?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
that's wired...why would someone do not want to enable this?
thanks :)
On Sat, Dec 19, 2009 at 8:18 PM, CrÃstian Viana
cristiandei...@gmail.com wrote:
you have to use the flag --enable-sync. run chromium like this:
chromium-bin --enable-sync
On Sat, Dec 19, 2009 at 11:40 AM, Xi Shen
thanks you all. rootdelay=10 is what i need.
On Sat, Dec 19, 2009 at 12:08 PM, Robert Bridge rob...@robbieab.com wrote:
On Sat, Dec 19, 2009 at 1:59 AM, Kyle Bader kyle.ba...@gmail.com wrote:
Is it rootdelay or scandelay?
rootdelay according to the stuff I found online. It's a delay to the
oh, i do not know we have that package. thanks, i will check that.
On Sun, Dec 20, 2009 at 12:33 AM, Willie Wong ww...@math.princeton.edu wrote:
On Sat, Dec 19, 2009 at 07:43:37PM +0800, Penguin Lover Xi Shen squawked:
my X it self works well with chinese. but the dolphin does not work
well
On Mon, Dec 21, 2009 at 3:38 AM, Frank Steinmetzger war...@gmx.de wrote:
Am Samstag, 19. Dezember 2009 schrieb Xi Shen:
hi,
my X it self works well with chinese. but the dolphin does not work
well with chinese. if any file contains chinese (or any non-ascii)
characters, it simply
i always run in root when doing emerge. every thing is ok.
On Tue, Dec 22, 2009 at 1:06 AM, Paul Hartman
paul.hartman+gen...@gmail.com wrote:
On Sat, Dec 19, 2009 at 8:08 AM, Ronan Mainbourg
ronan.mainbo...@gmail.com wrote:
Download work great when I type directly:
puf
hi,
i cannot access my computer now, so i can only tell you what i remember.
i am using gentoo amd64, and the portage is updated. the kernel have
kvm modules compiled. when i was trying to emerge kvm-kmod, it is said
to have been masked, so i unmasked it. but while compiling, kvm-kmod
failed
On Thu, Dec 24, 2009 at 8:18 AM, Nguyen Bao Ngoc baongoc...@gmail.com wrote:
Hi, why don't you try aria2? I replaced wget with it and it works well.
Here is my fetch command in case you want to try.
FETCHCOMMAND=/usr/bin/aria2c -d \\${DISTDIR}\ -o \\${FILE}\
\\${URI}\
On Thu, Dec 24, 2009 at 9:14 AM, Xi Shen davidshe...@googlemail.com wrote:
hi,
i cannot access my computer now, so i can only tell you what i remember.
i am using gentoo amd64, and the portage is updated. the kernel have
kvm modules compiled. when i was trying to emerge kvm-kmod, it is said
hi,
i have 2 servers, and both are amd64 and up to date, but 1 is have the
problem when starting consolefont. the error message is:
setfont: default8x16: no such file or directory
i have checked my /usr/share/consolefonts directory, i these files do
exist. i searched for a while, and some
hi,
i am using the vmware-tools that vmware workstation provided, and it
has some broken libs
/usr/lib64/vmware-tools/lib64/libconf/gtk-2.0/2.10.0/loaders/libpixbufloader-tiff.so
- (none)
/usr/lib64/vmware-tools/lib64/libconf/gtk-2.0/modules/libatk-bridge.so - (none)
hi,
i just tried to enable compiz fusion in my kde4 on a vmware guest os,
but failed. does anybody have luck with this?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
http://meme.yahoo.com/davidshen84/
On Thu, Dec 24, 2009 at 6:21 PM, Alan McKinnon alan.mckin...@gmail.com wrote:
On Thursday 24 December 2009 11:00:52 Marcus Wanner wrote:
On 12/23/2009 8:14 PM, Xi Shen wrote:
hi,
i cannot access my computer now, so i can only tell you what i remember.
i am using gentoo amd64
oh, so no 3d in vmware...i remember vbox has 3d in guest os. may be i
should give that a try. thanks ;)
On Fri, Dec 25, 2009 at 1:15 AM, Neil Bothwick n...@digimed.co.uk wrote:
On Thu, 24 Dec 2009 20:00:41 +0800, Xi Shen wrote:
i just tried to enable compiz fusion in my kde4 on a vmware guest
On Thu, Dec 24, 2009 at 4:45 PM, Neil Bothwick n...@digimed.co.uk wrote:
On Thu, 24 Dec 2009 15:25:57 +0800, Xi Shen wrote:
the system seems working well, but it is really annoying seeing them
every time. is there any way to resolve this? or can i tel
revdep-rebuild not to check these files
hi,
i want to emerge vbox, but i cannot fine reference about the
vboxwebsrv use flag. can someone help me?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
http://meme.yahoo.com/davidshen84/
On Sat, Dec 26, 2009 at 2:56 AM, Stroller
strol...@stellar.eclipse.co.uk wrote:
On 25 Dec 2009, at 16:19, Xi Shen wrote:
i want to emerge vbox, but i cannot fine reference about the
vboxwebsrv use flag. can someone help me?
This may be _some_ help:
$ euses vboxwebsrv
app-emulation
hi,
my system is gentoo amd64, kde 4.3, and have recently updated. last
time i emerged chromium and it works fine. but after updated the
world, my chromium cannot start up. it reports segment fault.
any idea why this happen?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
On Sat, Dec 26, 2009 at 6:43 PM, Ngoc Nguyen Bao baongoc...@gmail.com wrote:
On Sat, Dec 26, 2009 at 11:31 AM, Xi Shen davidshe...@googlemail.com
wrote:
hi,
my system is gentoo amd64, kde 4.3, and have recently updated. last
time i emerged chromium and it works fine. but after updated
hi,
my system is gentoo amd64, kde-4.3, my graphic card is nvidia's. i use
nvidia-settings to set up my two displayer to work in the tweenview
mode. it supposed to have two separate desktop, instead it have a
large desktop expand two displayer.
on gnome and windows, tweenview always sets up two
have they changed the definition of the word, or i were wrong at the
first place?
On Sun, Dec 27, 2009 at 5:13 AM, Alan McKinnon alan.mckin...@gmail.com wrote:
On Saturday 26 December 2009 19:29:10 Xi Shen wrote:
hi,
my system is gentoo amd64, kde-4.3, my graphic card is nvidia's. i use
On Mon, Dec 28, 2009 at 11:54 AM, Xi Shen davidshe...@googlemail.com wrote:
have they changed the definition of the word, or i were wrong at the
first place?
On Sun, Dec 27, 2009 at 5:13 AM, Alan McKinnon alan.mckin...@gmail.com
wrote:
On Saturday 26 December 2009 19:29:10 Xi Shen wrote
hi,
i emerged aria2-1.6.3, and according to the man page, i can use it to
d/l bittorrent file. but when i use
aria2c myfile.torrent
it says unrecognized protocol.
i have the bittorrent use flag set for it. do i miss any thing?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
hi,
when i replace the kde windows manager with compiz, all windows lost
their window border, and i cannot move the window. how can i fix this?
--
Best Regards,
David Shen
http://twitter.com/davidshen84/
http://meme.yahoo.com/davidshen84/
On Wed, Jan 6, 2010 at 11:55 AM, Ngoc Nguyen Bao baongoc...@gmail.com wrote:
On Wed, Jan 6, 2010 at 10:08 AM, Xi Shen davidshe...@googlemail.com wrote:
hi,
when i replace the kde windows manager with compiz, all windows lost
their window border, and i cannot move the window. how can i fix
hi,
i want to try to enable the aqua flag with my kde. but it is
displayed as (-aqua) when i try to emerge kde. i searched the
network, and people say it is disabled by my profile. i am using the
default/linux/amd64/10.0/desktop profile. which profile should i use
to enable this use flag?
--
hi,
i ran into a strange problem. i am using gentoo 2008 amd64, with kde
4.3. i want to try the aqua gui with kde desktop. so i enabled
aqua use flag, but when emerge kdelibs, it requires a tool named
install_name_tool which is a apple dev tool. so i think i could get
this tool by emerging
So, using the aqua use flag is not possible on a normal pc, right?
Thanks :)
davidshe...@gmail.com
send from mobile
On Jan 8, 2010 11:51 AM, Dale rdalek1...@gmail.com wrote:
Xi Shen wrote: hi, i ran into a strange problem. i am using gentoo
2008 amd64, with kde 4
This was posted a bit
On Sun, Dec 27, 2009 at 5:13 AM, Alan McKinnon alan.mckin...@gmail.com wrote:
On Saturday 26 December 2009 19:29:10 Xi Shen wrote:
hi,
my system is gentoo amd64, kde-4.3, my graphic card is nvidia's. i use
nvidia-settings to set up my two displayer to work in the tweenview
mode. it supposed
have you run alsaconf, and start alsasound?
On Mon, Jan 11, 2010 at 8:34 PM, Peter Humphrey
pe...@humphrey.ukfsn.org wrote:
Hello list,
Having finished building KDE on my new box (if that task can ever be
considered finished) I'm now tying up some loose ends.
When I log in to kde via kdm,
hi,
my system is gentoo amd64, kde 4.3. i have emerged kdebase-l10n with
chinese enabled. my kde system works fine with chinese. but smplayer
cannot display chinese filename correctly in its window title. i
already have chinese use flag enabled in smplayer. do i have to emerge
some other package?
On Sun, Jan 17, 2010 at 1:01 AM, Nikos Chantziaras rea...@arcor.de wrote:
On 01/16/2010 04:50 PM, Xi Shen wrote:
hi,
my system is gentoo amd64, kde 4.3. i have emerged kdebase-l10n with
chinese enabled. my kde system works fine with chinese. but smplayer
cannot display chinese filename
hi,
my system is gentoo amd64, with kde 4.3, smplayer is 0.6.8. i setup my
whole as root, and the system works fine. but if i log in as a normal
user, the smplayer does not have some. i have already add that user
account into the audio group.
what have i missed?
--
Best Regards,
David Shen
hi,
my system is gentoo amd64, with kde 4.3, and chromium is
4.0.226.0(33992). if i log on as root and start chromium with
--enable-sync, then select sync my bookmark, i got the following error
message
ERROR:chrome/browser/password_manager/encryptor_linux.c)
,
but the log in window still pop up,
On Sun, Jan 17, 2010 at 2:52 PM, Nikos Chantziaras rea...@arcor.de wrote:
On 01/17/2010 07:31 AM, Xi Shen wrote:
hi,
my system is gentoo amd64, with kde 4.3, smplayer is 0.6.8. i setup my
whole as root, and the system works fine. but if i log in as a normal
user, the smplayer does not have
On Mon, Jan 18, 2010 at 6:27 AM, CrÃstian Viana
cristiandei...@gmail.com wrote:
hi!
I'm running Gentoo inside VirtualBox (on a Windows host, if that matters)
and I can't make X.org work. when I try X -configure it says it can't load
the vboxvideo library. according to some Google searches,
1 - 100 of 216 matches
Mail list logo