David, these are the ones before June 2006:
http://www.mail-archive.com/legacyusergroup%40mail.millenniacorp.com/maillist.html
I don't know why the archives seem to stop in August 2008. For some
reason, the link Earlier messages doesn't show up after page 13. One
workaround is to manually type
you can't select
a range of RINs!
Susan Daily
On Fri, Jul 25, 2008 at 8:17 AM, Ruth Nerud [EMAIL PROTECTED] wrote:
Is there a way to get the age at marriage to print in reports? Some of my
ancestors' ages are for instance he was 65, she was 17, or he was 20, she
was 38. I think it would
Always make a back up first.
When merging, you will get check marks next to the different items on
both persons. You check which info you want merged into the main
person. (Select the one who is most correct as the main person, I thnk
it goes on the left.) Be sure to notice all the tabs in the
entry.
I ignore the errors generated now, also.
Susan Daily
On Tue, Jun 10, 2008 at 7:06 AM, Steve [EMAIL PROTECTED] wrote:
There is one little problem that has me stumped, some time ago someone
suggested using the Events to record addresses for people and it works
beaut except for a current
of acceptable practice or is
it just to get the desired results in Legacy?
Thanks,
Chuck
On Sun, Jun 8, 2008 at 11:45 AM, Susan Daily [EMAIL PROTECTED] wrote:
Chuck, the only way to do this would be to add more locations to your
master location list. If you create locations that follow
Jan,
I haven't seen the original email so will respond to the one copied below Ron's.
I did not have trouble embedding pictures into an RTF report in ver.6.
I have not tested this in ver. 7 yet.
When you open Word, go to one of the pictures that is not being
resolved. (I found that I had about
From the index view, you will want to click on Options at the upper right,
and select the other names types you wish to show (AKAs, and/or married
names).
Susan D.
On Thu, Jun 5, 2008 at 3:24 PM, Art Seddon [EMAIL PROTECTED] wrote:
I just installed version 7 and selecter the married name
Hi Elizabeth,
Yes, the mail delivery is being affected because it shares the same
servers as the Testing email lists (which allow attachments, which
take up memory) and the web site with all the ordering options. So
with the heavy demand on the web site and the higher than normal
volume on the
location, and keep the town in order. In
most cases, the VE mapping engine will pick up these additional IDs if
you use a dash rather than enclose the info in parenthesis.
Susan Daily
On Fri, Jun 6, 2008 at 7:18 PM, Chuck Arbogast [EMAIL PROTECTED] wrote:
Hello,
I was wondering what the best
Hi Rich,
I searched the Help file for BEPSC which then led me to search for
LDS Ordinance Marks. The help file says:
The list displays columns labeled B, E, P, S, and C, meaning Baptism,
Endowment, seal to Parents, seal to Spouse and seal Children.
A search of the archives for BEPSC yieled a 4/15
Dede, since cemeteries and churches, etc. are used by more than one person,
generally, it doesn't add tremendously to the Master Location list (although
I do have 1401 locations, so maybe it does). So then you can place the pin
for that cemetery and church more specifically. I wouldn't do
Phil,
I tested this on a copy of the Sample file and can confirm the same result
(I have build 45, ver 7). It seems that potential problem should not be
tested when theat option has been selected in the Data Format tab. I'll
report this as a possible bug.
Susan Daily
On Thu, Jun 5, 2008 at 3:23 PM
Dede, I enetered all my surnames with Initial Caps, but used the
Options to turn them into All Caps. I ran the potential problems
report and it told me I had surnames all in caps. Well, duh! (heh) So
one would think that with a little extra programming, the potential
problems can check to see if
Claudia,
Is there an associated error number? I don't know what this error is,
but maybe others do.
Susan D.
On Wed, Jun 4, 2008 at 4:28 PM, Claudia Gibson [EMAIL PROTECTED] wrote:
I downloaded Legacy 7 this morning on my home computer. Now I'm tryint
to put it on my laptop. When I do the
Paul, there is something called intellishare - you can read the Help
file to learn a little more about it. I've never used it, so can't
give the step by steps to take. You might search the archives for
intellishare also to see what the regular users of it have to say.
Here is part of the Help
Keith,
Since you've had no replies, you might write directly to support as
they should know, rather than us new users of Legacy 7 here on the
list! I think we would like to know, though, for future reference.
Saving the correct pin locations and transferring them can be useful.
Thanks,
Susan
On
As mentioned a few times on the list, this option is not available,
and there is no date for when it will be made available.
Susan D.
On Wed, Jun 4, 2008 at 7:23 PM, Jim Keener [EMAIL PROTECTED] wrote:
I've read everything new I can find on Legacy 7, but I can't find the
source converter.
JLB, do you have Internet Explorer v.7 installed? That is required to
use the mapping option.
If you do have it installed, some people with Norton have noted a
problem showing maps. The first time I used it, no maps showed. But
when I checked back later it did. And sometimes it only loads
Hi Graham,
I tried your steps, and was not able to replicate.
On the Search List results pop-up, have you selected Options, and
Include both married names and AKAs? I checked those off, and then
they appeared, but before that, I just had all names from birth.
Susan D.
On Wed, Jun 4, 2008 at
Carol, if you look up sentence in the Help index, you will find some
information there.
A Deluxe feature allows you to redefine the sentences.
You can either click on Sentence override for each individual event, and
create a new sentence structure there, or you select an event name in the
drop
.
(VE=Virtual Earth mapping by microsoft)
I hope this helps,
Susan Daily
On Sun, Jun 1, 2008 at 1:42 AM, Penny [EMAIL PROTECTED] wrote:
If you put an address in parenthesis after a town name in a location (master
location list), does this mess up any of the automatic things Legacy does
for that particular individual.
Susan Daily
On 6/1/08, Heeren [EMAIL PROTECTED] wrote:
Is there a way to attach a source to the *relationship* between a parent a
child? I have been adding the source to the name of the person but that
doesn't really show that I have a proof of parentage.
For instance, I have
Thanks, Gene. In GMAIL, my emails always look like plain text. I'll be
sure to double check in future.
Susan
On Sun, May 25, 2008 at 12:04 PM, Gene Young [EMAIL PROTECTED] wrote:
Susan Daily wrote:
Hi Anne,
Since you are new, this is just an FYI:
[And please also check the etiquette
I had been using the new Legacy ver 7 without IE7, at first. People can use
the program if they plan to not utilize the new mapping feature. This
feature is little more than a pretty thing that you can see on your
computer, but you cannot save the maps (as JPGs, etc.) to your reports or
your
Kimberly,
The mapping system uses Microsoft's Virtual Earth program. You can go online
and check to see how it does with your international sites, and that is
about how well it will do with Legacy. Keep in mind that the locations as
entered in Legacy is how VE will be processing them.
Here is the
Click on Help.
The last item on the drop down menu will be to unlock the deluxe features.
This is where you will enter your name and your customer number. After it is
entered, you will receive a confirmation message indicating that the Deluxe
features have been enabled.
Later, when you click on
, but I wanted to convert my older sources as described in the
manual.
--
*From:* [EMAIL PROTECTED] [mailto:
[EMAIL PROTECTED] *On Behalf Of *Susan Daily
*Sent:* Friday, May 23, 2008 5:05 PM
*To:* LegacyUserGroup@legacyfamilytree.com
*Subject:* Re: [LegacyUG
Robert,
I'm thinking you will have to use the Merge program. I would think that
Legacy imports what it gets without using any cleaning step, probably
since that cleaning step is available with the merge programming.
Sometimes two people are very similar in data entry, and you don't want
Legacy to
aboard!
Kind regards,
Susan Daily
On Sat, May 24, 2008 at 3:26 PM, [EMAIL PROTECTED] wrote:
I'm new to Legacy, having purchased V6 about two weeks ago. I've been
using FTM for several years, but wanted Legacy in addition – mainly because
of its ability to export reports as text files. I prefer
/Newsgroup_Gateways/GEN-MEDIEVAL.html
I bet they will have more familiarity with the issue. [I hope this is
of help, since you haven't had any LUG replies yet.]
Best wishes,
Susan Daily
On Thu, May 22, 2008 at 6:18 PM, [EMAIL PROTECTED] wrote:
I'm working on some medieval records that go back to a period
Doris, click on Options-Customize-Sources to find the check mark at the
bottom that turns on Source Writer! Good luck!!!
Susan
On Fri, May 23, 2008 at 2:25 PM, Doris Miller-Beck [EMAIL PROTECTED]
wrote:
As a newly converted Legacy user, I was really excited to get Legacy 7
upgrade in the
Jess,
you have to enter your deluxe customer number to be able to download from
the Legacy home tab.
The map is sometimes blank, and seems to reappear after you come back to it.
It doesn't seem to have anything to do with your connection.
Susan Daily
On Fri, May 23, 2008 at 4:04 PM, Jessica
. This will remind you what you've submitted. I keep
mine in the Legacy data folder.
Susan Daily
On 5/16/08, Carl Cox [EMAIL PROTECTED] wrote:
This is probably not the time to mention this, with all the excitement over
*7*, but when I do long merges I find myself hitting the wrong button. when
I am
by suddenly noticed the
7 too and got in line to purchase! So I really think there are a lot
of experienced Legacy users who were the purchasers yesterday, not
just newbies.
I was hoping to recognize some names from this list, but didn't, which
was a shame.
Susan Daily
p.s. hope you got
Valerie,
When we went from Version 5 to version 6, LUGers were asked to put the
VERSION they were asking about in the subject heading, so for example:
VER 6 Index question.
I hope we will all be good enough to remember to do this again.
Susan Daily
in Kansas City ;-)
On 5/14/08, Valerie Garton
I would tag everyone that DOES have USA, then search for tag# equal
to Untagged.
Susan
On 5/6/08, Jay S. Van Zeeland [EMAIL PROTECTED] wrote:
I am trying to map the emigrants to a Google map of Europe and I am hoping
that someone can help me with a search to show me the immigrants. I thought
Kris,
Some spreadsheet programs do not recognize dates before 1900 as real
dates, so they do not match the format of the more modern dates.
Someone once gave me a program that loads with Excel, so that it
recognizes all dates. I forget if it was through Legacy, but it may
have been, so might be in
Gayle - after you change the widths of all your columns following the
advice on this list, be sure to save it! I called mine tight so I'd
remember this was the setup where everything fits in tightly. (I think
you right-click over a header and instead of load, you can save
setup... if this isn't
Joyce, If this person were in my tree, I would use one employment
event, then list the range of dates he is listed as 1947-1960. In the
notes, I would indicate the various positions he held, since that is
interesting, and maybe a few of the names of the ships. Then in the
source, I would enter all
Valerie,
I know I am one of several persons on LUG who has forwarded
mean-spirited and derogatory emails written privately (sent off list)
to Legacy Support so that they can decide whether or not to remove the
offender from the subscription list.
Please consider doing the same. It can help the
Mary, I don't think you can. What I do is export everything (sources
and notes) to a GEDCOM file and then open it with Notepad (or a Word
processing program) to search with Find to look for the phrase I am
hoping to find.
An extra step, but it should be findable that way!
Susan
On 3/14/08, Mary
Richard, I will answer just the first question. When you do alternate
names, check out how the reports handle them. For example, if you just
use the last name, one Legacy report will say, Anna was also known as
Smith. And that wouldn't probably be what you would want to see.
Also, in the name list
, and not
really be able to publish what prints out in a PDF file. I discussed
publishing a family book from Legacy software on this list previously,
and my post can be found in the archives here:
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/msg17009.html
Susan Daily
On 2/26/08
said just be patient, and let it do its thing, it will
eventually download 100%.
Not sure if this is what you are experiencing, but thought I'd mention it.
Susan Daily
On 2/25/08, Erik Pilgaard Vinther [EMAIL PROTECTED] wrote:
Hi,
Yesterday i wanted to download the latest updates to Legacy
Michele, like Kristin says, the To-do list is your permanent record of
your searches. You want to keep the negative ones so that you know you
did look for them once in those conditions. Just make a note of it in
the Results tab after you close it.
Another good thing, too, is that it dates when
Stuart,
To upgrade to version 6 Deluxe, from Legacy version 5 deluxe, you will
need to pay an additional fee. The web site says, Those who purchased
Legacy 5.0 Deluxe Edition can upgrade to the new 6.0 Deluxe Edition
for just $21.95 Follow the links to the download version only.
You will get a
Hi Mark,
What message do you actually get when it says it cannot find the photo?
Could it possibly be connected to a to-do list item?
Odd that the latest GEDCOM does not show the path to the new photo.
Double check the new photo -- I would detach and reattach it as new,
just in case.
Susan
On
Tish:
I have seven regular backup files, one labeled for each day of the
week. So as I log off for the night, I select the file for that day.
Once a month, I save my file as a GEDCOM and label it by the month,
and upload it to Rootsweb's WorldConnect. I don't delete these monthly
backups.
But
Bob,
Go to this person's individual record. Does he have an employment
event? If so, click on the event. You should see a print of how the
sentence will read below the notes box. Does it read: He was
employed followed by your notes? If so, this is because you did not
put anything in the
Dick,
I think had a relationship with is the most generic thing you can
use. That covers boyfriend/girlfriend, casual friendship, partnership,
even marriage. Try mother/father and see how it reads in a report.
Good luck!
Susan
On 2/17/08, Dick [EMAIL PROTECTED] wrote:
Gary
Exactly my point
Bill - a quick fix is a figure of speech. He meant that there exists
no report that you are specifically looking for, but if you follow
those lengthy (not quick) steps, you will end up with a list of people
who are missing items. Ron's suggestions also will also work, but you
will end up with
Hi Momalot,
YOu don't need to Merge these trees, since they are all in the same
Legacy file. What you need to do is select existing individuals when
you need to add a mother, for example.
Let's look at: Next is my first cousin's Mother-in-law . . . still
don't have her maiden name! I'm trying.
, was a servant, and carried one bag. Mary A., age 15, was also a
servant, but had two pieces of baggage. They were off to stay in
Ravenna, Ohio.
I hope these ideas help,
Susan Daily
On 2/16/08, Erik Pilgaard Vinther [EMAIL PROTECTED] wrote:
I need some advice on how to document a person's initial
Erik, Yes, I agree! Do include as much narrative as you can stand to
in your database! It really makes the book writing so much easier! You
can use the privacy brackets to increase flexibility, too (like I did
with correcting the surname -- Killelea was the accurate translation,
but Killides is
Barbara, Yes, they are called Privacy brackets (probably more detail
if you search in Help for them). Lots of us use them in all sorts of
ways. I put much of my research data into brackets, and when I want to
see that stuff, there is a checkbox on reports that says Print
[[Private]] and Print
suggest if spam arrives in your inbox that you do
not open it, but if you do, please definitely do not respond with it
inside your email to the list!
Susan Daily
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
http://www.mail-archive.com
Barbara,
Try adding a fake child to your brother and his fourth wife. Now run
a report where he is the last generation. Does the fourth marriage
show up?
Susan
On 2/14/08, Barbara Ford [EMAIL PROTECTED] wrote:
I did try unlinking the fourth wife from my brother and relinking. No
change. Still
Yes, Dede, he has sent at least 16 emails to LUG since 2006.
On 2/14/08, Dede Holden [EMAIL PROTECTED] wrote:
I thought of that after I clicked the button. My reflexes are too
quick when I see Viagra!
Every now and then, an e-mail from LUG gets sent to my Spam file.
Fortunately and I can
Barbara,
Can you select just your brother and run a descendants report (3
generations) starting with him, and see what marriages are listed? Try
all three: Descendants Report; Descendants Book Report; and
Descendants Narrative (Book) Report.
Also, in Spouse view for your brother, do you see all
.
Paragraph 3: double-checked, and no.
On Feb 13, 2008 5:31 PM, Susan Daily [EMAIL PROTECTED] wrote:
Barbara,
Can you select just your brother and run a descendants report (3
generations) starting with him, and see what marriages are listed? Try
all three: Descendants Report; Descendants Book
Well, you can always go to Options - Customize - Data Defaults -
Living Indicator - NO
Susan
On 2/12/08, Valerie Garton [EMAIL PROTECTED] wrote:
Is there a way to add people who are not alive and have the not living
button on permanently to save having to select it every time ?
Regards from
Thanks Cathy - I added the number to show on All Name Lists and on
Family View and Pedigree View. I'm guessing to do items fit in one
category or the other!
It was an Individual To-Do item. I was able to open the to-do item,
but I wondered why I couldn't go from the to-do item to the individual
I had a To-Do Item appear on my reminder list. I wanted to go right to
the person, from the to-do item, but there is no way that I can figure
out how. Why isn't there even at least a RIN associated with this
to-do item?
If there isn't a way, then I will add it to the enhancements request list.
Hi Barbara,
I'll answer your second question. If you click on View-Childrens List,
you can highlight a child, then select a Child Status for them. I
select Twin. (If it isn't a default, you can make a new entry called
Twin.) Next, you can search for Individual - Child Status - Equal to
Twin.
I'm
Myrna, remember - check the archives to see if you are missing any messages!
Susan
On 2/4/08, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Thank goodness. I was afraid my ISP was playing games since it has been over
24 hours with no messages.
Not only is it sunny but it was hot today. Got all
Do you mean MRIN or RIN?
From Help:
Custom User ID Numbers
This option [go to Customize, then click on Other] creates and
automatically fills in a custom user ID number containing the RIN
number and optional text. This ID number can be placed in all User
Legacy Charting Companion is a purchased add-on to the Legacy
software. He is not talking about Legacy Chart beta. Is there a
separate list for Add-ons? I don't think so. This is the place to ask
the initial questions.
http://www.legacyfamilytree.com/LCComp.asp
Susan Daily
On 2/2/08, Don Brown
Good question, Penny. Doesn't make much sense to call it an archive
if they end in Nov 2007. (I checked also.) They should have gone back
to June 2006.
These archives ended in June 2006, and go back at least six years before then:
Where is your name not showing up? In a report? In family view?
On 1/26/08, Jim and Carol [EMAIL PROTECTED] wrote:
Can someone tell me how to show the living in Legacy 6 Deluxe? I cannot even
see my own name and for the life of me I cannot catch on.
Jim Ganley
Cushing, WI
Legacy User
: Susan Daily [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Saturday, January 26, 2008 6:11 PM
Subject: Re: [LegacyUG] Show living
Where is your name not showing up? In a report? In family view?
On 1/26/08, Jim and Carol [EMAIL PROTECTED] wrote:
Can someone tell me
FYI - I am printing in Portrait with no boxes.
On 1/25/08, Susan Daily [EMAIL PROTECTED] wrote:
Sherry,
Do you know if this problem has been resolved?
I was printing a Pedigree Chart today (ver. 6.0.0.155) and the
information on the far right overlaps (birthdate over name below
Sherry,
Do you know if this problem has been resolved?
I was printing a Pedigree Chart today (ver. 6.0.0.155) and the
information on the far right overlaps (birthdate over name below).
These would be for ancestors numbered 32-63.
Thank you,
Susan Daily
On 1/16/07, Sherry/Support [EMAIL
Go to the Master Location List.
Click on the Sort button at right.
Under Pre-defined USA sorts, select the second option: Country, State,
County, City.
To the right, select Left to Right.
Click OK.
Make sure a check mark is selected next to the Sort button.
--Susan
On 1/24/08, [EMAIL PROTECTED]
JB,
Legacy can't do this automatically. First off, you need to upload your
photos to the internet. Legacy won't know where those files are
located or what they are named.
So even though you don't want to, you would have to take each of those
individuals for whom you have photographs and load
I checked help, but didn't get a full answer:
Statistics: This box shows you how many individuals, families and
sources are currently in your family file.
On the Home Page tab, it says I have 299 Sources. But when I did a
large book, that branch of the family had about 950 sources cited. So
are
Gary - I didn't follow the whole thread, so I'm sorry if this was asked.
Was the event created in Marriage Events or Individual Events? I would
think it cannot work in Individual Events because the program would
not know which marriage to take the surname from. At least a Marriage
Event would
in
Marriage Events. I do very little placing of events there because of
Legacy's limitation of not having the information appear on Individual
Reports.
Gary
-Original Message-
From: [EMAIL PROTECTED] [mailto:LegacyUserGroup-
[EMAIL PROTECTED] On Behalf Of Susan Daily
Sent: Monday, January
John:
I usually put the headstone information as the source, but I also list
it in the burial notes, not death notes. If you attach a photo to the
burial notes, it will not print in reports. So I also created an event
called Headstone which I attach the photo to.
Susan
On 1/20/08, Jenny M Benson
has appeared to the list yet.
Susan Daily
On 1/20/08, John Murray [EMAIL PROTECTED] wrote:
Hello List
I find it strange that within the past hour I have sent two emails to the
list seeking advice but they have not appeared on my computer even though I
have received answers to the questions
I was looking at your steps, and they don't quite match Descendants
Narrative reports.
When you click on Report Options, you click on a tab called Sources.
There you select Print Source Options. I don't see the
-- following selections, i.e. Include source details on source
citations on reports
Elizabeth,
If you get a report that has that event statement below, and you go
back to that individual, do you find no events for him? Could you
possibly have redefined an event, or maybe it is blank, but with a
sentence defined? I'd like to know what you actually find - how the
event is labeled,
Hi Cathy,
I use Est for estimated dates, that is, dates, where I do simple
calculations (like subtract 30 years from a birth for a father's
birth) or make assumptions about a date. I use abt when I have an
age and a year, and can calculate within 1 or 2 years the correct
date. I have no problem
Hmmm - good question since it doesn't say on the web site:
http://www.legacyfamilytree.com/RevisionHistory6.asp
On 1/15/08, Mike Fry [EMAIL PROTECTED] wrote:
OK then! What's changed?
--
Regards,
Mike Fry
Johannesburg.
Legacy User Group guidelines:
Jan,
Since they aren't descendants, or spouses of descendants, they won't
be listed in the narrative. What I did in my book report was to list
the information in notes so that it would appear. You can use the
control characters to make the names bold in the notes, too.
Susan
On 1/15/08, Jan
Momalot:
On the day that you wish to unsubscribe, go to the link as noted at
the bottom of each email. (Sending unsubscibe to the list
won't/shouldn't unsubscribe you.)
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
When you are ready to resume, you can resubscribe at the same
relationships (if any), birthdate and place of birth, physical
description, and signature. In the signature, you can note that it
came from his Draft Card.
Kind regards,
Susan Daily
On 1/14/08, Arnold Sprague [EMAIL PROTECTED] wrote:
Now that 24,000,000 U.S. World War I Draft Registration Cards
Ron,
What a great suggestion. I had forgotten about that.
Legacy is so flexible!
Susan
On 1/14/08, ronald ferguson [EMAIL PROTECTED] wrote: [snipped]
to include WW1 Draft Registration as a default Event.
You can add this as an Event yourself via ViewMaster ListEvent DefinitionAdd.
Legacy
, in reports, you lose a whole
generation, and relationships won't calculate properly (sister
instead of niece etc.).
Susan Daily
On 1/14/08, Jim Smith [EMAIL PROTECTED] wrote:
I would like to enter a grand-daughter to an individual without adding a
blank or unnamed daughter, into my database Any
://wc.rootsweb.com/cgi-bin/igm.cgi?op=GETdb=cullivansid=I417
Susan Daily
On 1/13/08, Kirsten Bowman [EMAIL PROTECTED] wrote:
Heaven bless the name collectors! I wouldn't have the patience for it
myself, and at one time I used the term with a touch of scorn. Who in the
world would be crazy enough to put
(uncheck Export Private indiviiduals) or Reports.
Susan Daily
On 1/13/08, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I've received some data concerning purported children of a man. This data
is not proven, but is, according to the researcher, a collection of data from
various unsourced web
Hi Elizabeth,
In the family view, select the spouses icon for either the husband or
the wife. You should see the spouse listed four times. Check to see
which marriage has the actual data entered, then select and unlink the
other marriages one at a time. You may find that you will have to add
the
I'll second George's response. I have a little over 6,000 and they
were all researched by me. You can use the GEDCOMs online as clues. If
and when you add those 3 or 4 people who are of interest to you,
just be sure to source them, mark their Surety Level at a 0 or 1, and
provide the name of the
either marriage yet, I
just clicked on Save or OK. I noticed later that the Dowd MRIN was
something like 95.
On 1/11/08, Susan Daily [EMAIL PROTECTED] wrote:
I am using Legacy Deluxe 6.0.0.155. [Note older version.]
I just added a second spouse to a woman who already had a first
husband
don't know why it
didn't last time. I'm just pointing it out in case anyone else wants
to try to duplicate it. If someone doesn't notice, they'll end up
adding info for the first MRIN by accident.
Susan Daily
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived
to go and edit my notes to be in sentence
form, rather than just a list and bulleted items.
Susan Daily
On 1/7/08, ronald ferguson [EMAIL PROTECTED] wrote:
Hmmm. It seems to me that these notes can only be included in the Location
Report and the Location Index.
The former IMO is probably
Are you talking about the window that pops up asking you for Source
Detail for ---? If that is the case, you might want to consider at
least selecting the date that you are sourcing the item and the surety
level, even if you have no further detail to add. Then you may wish to
save this into your
The only way to do it is to redefine the event. You can either redo
events so that they are nearly identical, i.e.: Occupation-Living, and
then use present tense verbs in the various sentence definitions, or
you can use the traditional event, and then just change it for that
one particular event,
From the Home Tab - look at the upper right of the window. Do you see
an Options button with an icon of a ruler, etc. on it? Click on that.
Then Click on Options. Under Internet Options tab, select the second
choice. Never.
Took me a while to find that button!!
Susan
[And I don't know the answer
emeail your
DYAS Legacy file to someone recently? All those can be considered
back-ups, too.
If not, then I hope someone else can tell you how to delete those 800
people quickly.
Susan
On 1/4/08, Susan Daily [EMAIL PROTECTED] wrote:
Valerie, check and see if you have the backup of your DYAS file
Valerie, check and see if you have the backup of your DYAS file before
you made the import. That might be your best bet. Otherwise I think
you would have to go in to the Index and right-click select Delete for
each of the 800 people.
Susan
On 1/4/08, Valerie Garton [EMAIL PROTECTED] wrote:
I
1 - 100 of 447 matches
Mail list logo