Hi,
Hope this is where I come to find out if the links in the research
guidance are still supposed to work.
Was doing some checking out at research guidance on the Legacy 8 program
and found that a link on the suggested sources on the Goal: Birth tab
for Boyd;s Marriage Index, 1538-1840 has a link
The link goes to a page on the British Origins website which,
presumably, no longer exists. I have checked out their collections list
and Boyd's Marriage Index does not seem to be on it.
David Newton
On 13/12/2013 12:07, Kim Jones wrote:
Hi,
Hope this is where I come to find out if the links
Hi Ian. I emailed support yesterday and they fixed it last night so I am
all good now. :) You can try emailing them again!
Stephanie
On Thu, Dec 12, 2013 at 7:45 PM, Ian Gardener ian3...@gmail.com wrote:
I too created a new email address. Despite trying to subscribe over
and over (abt 40
Not sure if this is a bug, a suggestion, or if I have a problem!
New Sourcewriter - Source Clipboard set up
1. When moving between tabs to add information, it appears each time I must
click save which saves the information and returns me to the Individual's
Information Screen.
2. Then I must
List, What does died in and buried in in red mean? I thought maybe it
was if there was a note attached, but I noticed that I have some died in
not colored red wirh a note attached and some died in colored red
without a note.
Same thing with the buried in. I have 51 with a burial note and only one
I think it means there is a source attached.
Paul Gray
-Original Message-
From: Lloyd Hite [mailto:lhit...@gmail.com]
Sent: December-13-13 9:41 AM
To: LegacyUserGroup@LegacyUsers.com
Subject: [LegacyUG] Edit screen has some died in and buried in colored red.
List, What does died in and
On 2013/12/13 18:41, Lloyd Hite wrote:
List, What does died in and buried in in red mean? I thought maybe it
was if there was a note attached, but I noticed that I have some died in
not colored red wirh a note attached and some died in colored red
without a note.
Same thing with the buried
On 12/13/2013 11:46 AM, Paul Gray wrote:
I think it means there is a source attached.
Paul Gray
Thank you, Paul. I think you are correct.
Lloyd
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages after Nov. 21 2009:
There is a work around in build 361 Bill. As one other poster indicated
you can place the source on the source clipboard in Legacy 8, pasting
from the clipboard will work to add a new source.
Brian
Customer Support
Millennia Corporation
br...@legacyfamilytree.com
http://www.LegacyFamilyTree.com
By Googling for the Index I found this post dated 07-01-2011 on a
http://www.british-genealogy.com forum:
According to a press release on the Society of Genealogists web site,
SoG data that was previously available on the Origins web site is moving
to Findmypast.
Google also listed FindMyPast as
What Tabs do you mean. I just visited the Detail Information,
Text/Comments, Media and Overrides tab in the clipboard. There was no
need to save and no data was lost from any tab by changing to the others.
Are you using the new option to have multiple sources on the clipboard?
I had mine set to
When I do File Maint. - Compact it reports file compacted then error
opening database File is already open. Have to quit and reopen or try again
and eventually it opens.
Compact a second time and get same problem again.
Can someone confirm please?
--
Richard Van Wasshnova
Legacy User Group
I suggest you investigate the settings for your pad. A scroll area on a
touchpad is not new. I had a laptop, and not an expensive one at the
time, in 2006 where the touch pad could be configured to have a
scrolling area.
Brian
Customer Support
Millennia Corporation
br...@legacyfamilytree.com
If it won't create a new source detail then how do I paste it into the
clipboard? I'm still using Build 8.0.0.358 which works fine for now. I'll
wait until it's fixed before updating.
Thank you.
Bill Boswell
-Original Message-
From: Brian/Support [mailto:br...@legacyfamilytree.com]
When I try to export to Legacy family file either complete or just s few
tagged persons I get:
Error saving source.
Error 3021. No current record.
I did File Maint twice before trying so that shouldn't be problem.
Is it my file or the program?
--
Richard Van Wasshnova
Legacy User Group
Brian,
I can confirm your observation as to the current arrangements between FMP and
the SOG re Boyle's Marriage Index. The change was made quite some time ago.
Ron Ferguson
http://www.fergys.co.uk/
Brian/Support br...@legacyfamilytree.com wrote:
By Googling for the Index I found this post
What Brian meant was that you enter it into the clipboard and then paste
what's in the Source Clipboard to your event.
Sincerely,
Sherry
Technical Support
Legacy Family Tree
On Fri, Dec 13, 2013 at 11:33 AM, William Boswell whbosw...@gmail.comwrote:
If it won't create a new source detail
You could attach it as a File rather than a Picture so that it opens in
your Windows default jpg program.
--
Richard Van Wasshnova
On Thu, Dec 12, 2013 at 2:00 PM, Dale Carmack dcarm...@md.metrocast.netwrote:
I have several questions regarding Legacy 8.0 so far. I've noticed on
several of
Richard,
I think you mean IMPORT a Gedcom.
This is a known problem with Build 361 that
should be fixed in the next update. I believe it
is related to the database conversion that took place.
john.
At 03:00 PM 12/13/2013, Richard Van Wasshnova wrote:
When I try to export to Legacy family file
I did a Compact/Repair this morning - no problems. Make sure that the
Family File isn't open in any other program - an add-on or LFS.
You may need to reboot your computer
Sincerely,
Sherry
Technical Support
Legacy Family Tree
On Fri, Dec 13, 2013 at 11:26 AM, Richard Van Wasshnova
Richard, it isn’t just you.I’ve experienced similar problem (error 3021).
Also, I can’t run a check/repair without an immediate error 91, I think it
is. I tried a few things from the support page with no luck. I sent an
email to support but haven’t heard back yet.
The strange
Mine compacted OK.
From: Richard Van Wasshnova [mailto:rfvanwasshn...@gmail.com]
Sent: Friday, December 13, 2013 1:26 PM
To: LegacyUserGroup@LegacyUsers.com
Subject: [LegacyUG] Compact Family File - possible bug
When I do File Maint. - Compact it reports file compacted then error opening
Dave,
I have helped other with this problem. I have done a number of things to fix
the persistent error 3021 abd error 91 problem:
1. File Maintenance List Cleanup
2. File Maintenance Check Repair
3. Export all the records to a new Legacy file.
4. Export all the records to a GEDCOM file and
Yes I can confirm this is a new problem.
From: Richard Van Wasshnova [mailto:rfvanwasshn...@gmail.com]
Sent: Friday, December 13, 2013 2:01 PM
To: LegacyUserGroup@LegacyUsers.com
Subject: [LegacyUG] Export to new Legacy family file, error or bug?
When I try to export to Legacy family file
Thanks Sherry Kurt,
Problem resolved. Got it OK on laptop and restored to desktop. No problem
now.
--
Richard Van Wasshnova
On Fri, Dec 13, 2013 at 11:26 AM, Richard Van Wasshnova
rfvanwasshn...@gmail.com wrote:
When I do File Maint. - Compact it reports file compacted then error
opening
Thanks Sherry Kurt,
Problem resolved. Got it OK on laptop and restored to desktop. No problem
now.
--
Richard Van Wasshnova
On Fri, Dec 13, 2013 at 12:19 PM, Sherry/Support
she...@legacyfamilytree.com wrote:
I did a Compact/Repair this morning - no problems. Make sure that the
Family File
Jim,
All went ok with the List Cleanup.But when I try the Check Repair, I get an
error 91 immediately.
Thanks
Dave Pointer
--
Dave,
I have helped other with this problem. I have done a number of things to fix
the persistent error 3021 abd error
Jim,
I did have errors for File Maint - Check repair and Compact but they are
cleared up now. I did compact in MS Access.
Still cant:
3. Export all the records to a new Legacy file. (Or 6 tagged records)
--
Richard Van Wasshnova
On Fri, Dec 13, 2013 at 1:10 PM, Jim Terry/Support
Try the export steps.
Original Message
From: Dave famho...@gmail.com
Sent: December-13-13 2:10 PM
To: LegacyUserGroup@LegacyUsers.com
Subject: RE: [LegacyUG] Export to new Legacy family file, error or bug?
Jim,
All went ok with the List Cleanup.But when I try the
And I'm getting error 3021 when I am trying to SAVE an event.
Mary
On Fri, Dec 13, 2013 at 12:51 PM, Dave famho...@gmail.com wrote:
Richard, it isn’t just you.I’ve experienced similar problem (error
3021). Also, I can’t run a check/repair without an immediate error 91,
I think it
I'm having trouble importing a gedcom (in 5.51 format) into a new file in
Legacy version 8. After it goes through reading the gedcom, it asks about an
autosource, and then it gives me a 3021 error (even though this is a completely
new Legacy file, with no previous records that could have been
Bill,
Copying an existing source and detail to the Source Clipboard is only
one way to populate the Source Clipboard and not the major way.
Open the Source Clipboard using the triangle and use the link to
choose your Master Source then fill in the Detail then Save.
Then it is ready to be applied
Hi Kirsty,
There are export problems with the current build.
You'll need to wait for the next build/update
Cathy
At 07:22 AM 14/12/2013, you wrote:
I'm having trouble importing a gedcom (in 5.51 format) into a new
file in Legacy version 8. After it goes through reading the gedcom,
it asks
Confirmed, it is a problem with the program. Mantis Issue raised.
Brian
Customer Support
Millennia Corporation
br...@legacyfamilytree.com
http://www.LegacyFamilyTree.com
On 13/12/2013 3:00 PM, Richard Van Wasshnova wrote:
When I try to export to Legacy family file either complete or just s few
I just tried to save a Gedcom and got an error 3021 also.
Went through the process of creation with no problems, 3021 displayed
after trying to open it.
Any suggestions?
Thanks,
Brian
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages after Nov.
1. You can open the clipboard and set up the source and details there
without copying from an existing entry. This is the method Geoff uses in
all his watch Geoff live webinares. Once you have it on the clipboard
you can paste.
2. You can temporarily add the source to an event which has no
Jim,
Exporting all records to a new Legacy file gets an error 3021.
Exporting to a Gedcom file goes OK.Re-importing that Gedcom goes fine until
it starts creating the Family File and then stops with an error 3021.
Dave Pointer
Try the export
You've mentioned this at least twice, Brian. Just what is a Mantis Issue? I
hope it doesn't refer to the habits of the female Preying Mantis. I know Legacy
8 is supposedly to be a real pleasure, but ... Also, if it does, I do not like
the macho attribution to the death of the program. Just
Thanks, but I'll wait for the next build release. I'm not using the current
one since it looks like other people are having different problems with it.
I'm already using the previous build and it works just fine without any
problems.
Bill Boswell
-Original Message-
From: Cathy
I must be missing something here.. ?? The “installation” still doesn’t work for
me, I’ve tried it several times; tried deleting all the old tries, starting
over, clicking on the blue download “exe” title, I get the “wise wizard
installation process”; I see all the files going through as it’s
I'm sure we've been told before that Mantis is the bug-tracking program
used by the Legacy team.
A Google search on that term quickly brings up a result that appears to
be relevant - http://www.mantisbt.org/
Wendy
CE WOOD said the following on 14/12/2013 2:11 p.m.:
You've mentioned this at
Try a Search Replace from the Search menu
Find where General Notes
Find what (press the space bar twice to indicate a double space)
Replacement text (press the space bar once for a single space)
How to find
Tick Find whole word only
Tick Anywhere in the field
How to replace
Tick Replace only
Unless someone can beat Support I am probably going to have to go back to
V7.5.
Support have looked at my problem and despite attempts have been unable to
fix the problem.
I have some files where trying to open the Media from the Media Gallery is
proving a major problem. It is only the people
So glad to have a computer tech poster who can enlighten those of us who are
conversant in other parochial terms, but not computer lingo. This all too
common problem makes manuals and Help files so unhelpful; they are written by
those who forger that users are often not as versed in the lingo
This is a known problem with importing a GEDCOM in build 361.
Brian
Customer Support
Millennia Corporation
br...@legacyfamilytree.com
http://www.LegacyFamilyTree.com
On 13/12/2013 6:50 PM, Brian wrote:
I just tried to save a Gedcom and got an error 3021 also.
Went through the process of
My problem is not double spaces, but broken words
Here is an example with the broken words in bold
Myra H. Thielen, age 92, of 1619 Armstrong St., Marinette, passed *aw
ay*on Saturday, June 3, 2006, after a short battle with cancer. She
was *bo
rn* on November 29, 1913 to the late Benjamin A.
Hi Pam,
I have the same issue and have logged a support problem report on Dec 4 without
a response as yet.
I’ve tried all that you have done plus Re installed Legacy 8 to the latest
build, re installed Geo Database multiple times, removed all other traces of
Legacy V 7, started from scratch
I want to uninstall Legacy 7 and 7.5 from my computer. I have gone to the
LegacyFamilyTree site, to troubleshoot, categories, Install/Uninstall and
followed the directions, but it doesn't uninstall, I keep getting the error
message 'INSTALL.LOG.FILE. missing. I went to step 2, and deleted the
Legacy v7.5 is actually an upgrade to v7 so you should have only that
version on your computer.
Go to Start menu All Programs and use the uninstall in the Legacy folder
there. You should have a folder. If it's not there, then Legacy has already
been uninstalled, although the uninstall does
It appears that the extra spaces are evenly spaced, every 75th character,
except the first one and I suspect you may have left of some leading spaces,
perhaps even on a preceding line.
So what you need is a function that will change the space at position 75, 150,
etc to a unique character
Sherry, Thank you for responding. I now have Legacy8 and would just like to
uninstall Legacy 7.5. As mentioned, the start menu does not have any
subfolders under the Legacy program folder, so no uninstall link is there. In
c:Legacy folder on my hard drive, I have tried the uninstall and get
51 matches
Mail list logo
